Loading…
Loading…
Tender ID
Tender Value
₹1.9 L
EMD Value
₹4,638
Closing Date
13 Mar 2026, 3:00 pmClosed
ASSITANT ENGINEER LID AND EW
O/o ASSITANT ENGINEER LID AND EW
GENERAL-Purapuzha Gramapanchayath Project SOO91/26-Kuryanalkunnu Drinking Water Scheme Maintenance ,Providing Motor Pumpset
2026_LSGD_843720_1
11/AE/2025-26
Open Tender
Electrical Works
Item Rate
120 days
PURAPPUZHA
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,638
Yes
5 Mar 2026
5 Mar 2026
16 Mar 2026
5 Mar 2026
13 Mar 2026
5 Mar 2026
Part 1- Providing Pump set - ( Materials used for the work shall be as per list of materials approved by the District Level Technical committee and attached as separate document
OD512605/2025-2026:Supply, conveyance, errection, testing and commissioning of 6" bore well type submersible Pumpset 10 HP , working on 3 phase 415 V, with head range 41/183 and discharge range 300/90 LPM ,TEXMO make SUB PUMP 10HP RS42 /20+ST075D or equitant ) suitably mounted on proposed 50 mm GI pipe etc as required.
OD512612/2025-2026: Supply and providing BCH SPS SD PREMIUM 8.9-13.5A CPSDPYK with protection against overload, single phasing, phase reversal & severe unbalanced voltages conditions, in accordance with latest IS/IEC 60947-4-1 specifications suitable for 10 HP submersible motor pump set complete duly internally connected
OD512599/2025-2026:Supply and fitting L&T module for mobile starter M power pro etc, as required.
OD512608/2025-2026:Supply and providing ASHIRVAD UPVC ADAPTORSET 60MM[2"] DC CI
OD512600/2025-2026:Supply and fitting 50 mm GI Bend on pumping main with flanges welded and nut bolt etc on pumping main.
OD512617/2025-2026:Supply and fitting 50 mm GI Socket ISI HEADER QUANTITY
OD512626/2025-2026:Supply and Providing 60 mm UPVC pipe (2") with accessories etc
OD512606/2025-2026:Supply Providing KARTAR make NRV CI HEAVY ISI 65MM[21/2" for the pumping mai
OD512607/2025-2026:Supply and providing KARTAR make SLUICE VALVE CI ISI 65MM[21/2"
OD512604/2025-2026:Supply and fit FLANGE CI ROUND HEAVY 65MM with with all necessary accessories
OD512601/2025-2026: Supply and Providing DUTRON UPVC COLUMN PIPE 50MM (2") GREEN HY 27KG CE with required accessories
OD512629/2025-2026:Supply and fixing 50 mm x 9" GI barrel nipple etc as required.
OD512630/2025-2026:Supply and providing Cable Joint Tape etc. as required.
OD512631/2025-2026:Supply and providing Cotton waste etc. as required.
OD512632/2025-2026:Supply and fixing 25mm Ball Valve with 15mm nipple and 15mm socket duly welded as required
OD512633/2025-2026:Supply and providing clamp set CI 50mm Heavy
OD512634/2025-2026:Supply and fixing 50mmx 12" GI Barrel nipple
OD512635/2025-2026: Supply and providing rubber packing as required
OD512620/2025-2026:Supply and fitting of Pressure meter with accessories and stopper valve etc on delivery side of 50 mm GI pipeline as required
OD512602/2025-2026: Supply and providing NYLON ROPE MAXIMA LG14MM
OD512623/2025-2026: Supply and provide Y joint in pumping line for the erection of two Nos pump set In the same pipeline
90.6.6.4:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.6 sq mm
90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm
OD512603/2025-2026: Supplying and clamping the following sizes of corrugated PVC flexible conduit 20mm with necessary compression gland with locking ring and check nut at termination pointed using suitable size GI / painted MS saddles spacing not exceeding 60 cms on surface including making good the damages, colour washing etc. as required.
OD512616/2025-2026:Supply and drawing following size of FRLS PVC insulated copper conductor single core cable in the existing surface / recess steel/PVC conduit as required 1x10sqmm
OD512637/2025-2026:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. (excluding cost of HRC fuse links in case of SDF/ SDFCO). 63A, 415 V, 50 Hz, AC 23 A duty, 4 pole on-load change over switch.
OD512638/2025-2026:Earthing with pipe earth using 40 mm GI pipe and required accessories including labor charges etc. as required.
90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)
90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)
90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
OD512618/2025-2026:Supply and providing 25x3mm brass nut and bolt etc. as required.
90.14.7:Supply and providing copper earth bus in the panel board
OD512615/2025-2026:Supply and fixing 63 A 415 V , 2 way neutral link mounted on DMC / SMC base in the existing meter board and giving connection etc.
OD512613/2025-2026:Supply and fixing 63 A backelite fuse base with HRC fuse link in the existing meter board and giving connections etc
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.21 MB
Tendernotice_2.pdf
PDF • 0.18 MB
Tendernotice_3.pdf
PDF • 0.18 MB
BOQ_1424196.xls
BOQ • 0.32 MB
91sbd.pdf
Tender Documents • 1.63 MB
KURYANALCORRI.pdf
PDF • 0.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .