GI PIPELINE

Cutting open C.C. road surface with concrete saw cutter and removal with Breaker

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD, 304 MORTH Raw water pipe line to hydrant point

Earth Work for pedastal

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Manufacture, supply, & delivery of GI Pipes of various sizes and transportation anywhere in Andhra Pradesh, excluding GST. (100mm GI 'B' Class Pipe) 150 mm GI 'B' Class Pipe)

100mm GI 'B' Class Pipe)

Fabrication, transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1setVoltmeter & Ammeter selector switch - 2 NosSupply and fixing of ISI Mark suitable capacitor Voltmeter;. Makes: L&T / C&S / SALZAR/HPL/AEI / Meco / RishabAmmeter Makes: L&T / C&S / SALZAR / HPL/AEI / Meco / Rishab Single phase preventor Makes: L&T / Minilec /Powertec. 32 A TP, 10KA MCB. Makes: Legrand / Schneider capacitor Makes: L&T / Siemens / Schneider /Epcos/Havells. From 15 HP up to 20 HPwith Automatic Star Delta Starter ELEC-5.4.17 (MAT-03715

Supply and Delivery of Water Supply Materials including and conveyance of all kind of charges etc., complete 100mm dia thread G.I Flanges

80mm Dia MS Long Bend

80mm Dia G.I Long Bend

80mm Dia GI Coupling

80mm Dia long L-Bow

3'' x 1/2' Nipple

Supply delivery of 100mm section house pipe

Supply delivery of 100mm rubber foot valve washers

Supply and Installation of PVC Insulated 3Core 4Sqmm Sheated Flexible Copper Wire For Voltage up to 1100V as per IS 694/1990 of Makes Finolex/RR Cable.Lr

Supply and Installation of PVC Insulated 3Core 6Sqmm Sheated Flexible Copper Wire For Voltage up to 1100V as per IS 694/1990 of Makes Finolex/RR Cable.Lr

Supply delivery and Fixing of of 4" CI I.S.I Mark Foot Ball along with 1/2" MS Nuts, Bolts with double washers (L.R)

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD/MORTH for finished item of work.

Cost of 100 mm dia. x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322-1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS Special including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange). as per SOR 2022-23, Pg.No.51, Sl.no.05

Welding of Gl Pipes including Welding machine, rods and Welder all labour charges etc Complete as per Lr

Engaging of JCB For Removal of Trees and Silt Inculding all charges (Transportation charges, Driver Wages, Fuel Charges) etc., Complete

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS Class I, Indian make heavy type-40 mm NB Size

Supply of 63A Fuses 415V Porcelain Rewireable Fuse Units. Lr

Supply of 63A FP Isolator. Lr

Supply of Peeta Boards of size 18" x 24" Lr

PVC/cotton tape Role (8 Mtrs) Lr

Providing, installation, testing and commissioning of100mm Dia C.I Non -return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc as required. Makes: Kartar (Lr)