OPEN Tender Of ERECTION, MAINTENANCE AND DISMENTALLING WORK OF OVERHEAD HT/LT LINE, TC & HT/LT AB CABLE UNDER THARAD-RURAL SUB DIVISION UNDER THARAD DIVISION.

No. Quantit In figure Amount

HT TAPPING FROM EXISTING POLE

INCLUDING FIXING OF CROSS ARMS, CLAMPS

ANTI CLIMBING DEVICES,DANGER BOARDS,

INSULATORS ETC & PAINTING OF

1(a) FABRICATED MATERIALS AND NUMBERING OF 75 NO. 459

POLE,COMPLETE WITHOUT COST OF NUTS &

BOLTS, PAINTS AS PER STANDARD

SPECIFICATION EXCLUDING OF GUY SET AND

1(B LT LINE TAPING SINGLE PHASE WITH OUT

) COST OF NUTS & BOLTS

1(C LT LINE TAPING THREE PHASE WITH OUT

) COST OF NUTS & BOLTS

ERECTION OF SINGLE POLE STRUCTURE

INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH,FIXING OF CROSS

ARMS,TOP FITTING CLAMPS AND ANTI

CLIMBING DEVICES , INSULATORS ETC.

2 COMPLETE AND PAINTAING OF FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING OF POLE COMPLETE WITHOUT

COST OF NUTS & BOLTS, PAINTS AS PER

STANDARD SPECIFICATION BUT EXCLUDING

OF GUY SET AND EARTHING

(A) PSC POLE 8 MTR. LONG 200 KG . 250 NO. 1113

(B) PSC POLE 10 MTR LONG 270 KG 20 NO. 2466

(C) STEEL POLES OF 9 TO 11 MTR

(D)STEEL POLE OF 13 METER FOR RAILWAY

CROSSING ON BG/MG/NG LINE FOR 10 NO 2137

0.400/11/22 KV OVERHEAD LINES

ERECTION OF DOUBLE POLE STRUCTURE

INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTHING , FIXING OF

CHANNELS , SUPPORTING ANGLES , CLAMPS

,ANTI CLIMBING DEVICES ,DANGER BOARDS

INSULATORS ETC COMPLETE AND PAINTING

OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING OF POLE WITHOUT

COST OF NUTS & BOLTS, PAINTS AS PER

STANDARD SPECIFICATION BUT EXCLUDING

OF GUY SET AND EARTHING.(WITHOUT AB

(A) PSC POLE 8 MTR LONG AND 200 KG 10 NO. 2530

(B)PSC POLE 10 MTR LONG AND 200 KG 3 NO. 5320

(C)STEEL POLE 9 TO 11 MTR 3 NO 3655

ERECTION OF DOUBLE POLE STRUCTURE

WITH MOUNTING OF AB SWITCH , HG FUES

INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTHING , FIXING OF

CHANNELS , SUPPORTING ANGLES , CLAMPS

,ANTI CLIMBING DEVICES ,DANGER BOARDS

INSULATORS ,DO FUSES ETC COMPLETE

AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING OF

POLE WITHOUT COST OF NUTS & BOLTS,

PAINTS AS PER STANDARD SPECIFICATION

BUT EXCLUDING OF ERECTION OF GUY SET

AND EARTHING(WITH AB SWITCH)

(A) PSC POLE 8 MTR LONG AND 200 KG 5 NO 3042

(B) STEEL POLE 9 TO 11 MTR 3 NO 3990

(C) STEEL POLE OF 13 METER 3 NO 4531

ERECTION OF DOUBLE POLE STRUCTURE

WITH MOUNTING OF AB SWITCH , HG

FUES,TRANSFORMERS, LIGHTENING

ARRESTORS , DISTRIBUTION BOX ETC

INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTHING CARTING OF

TRANSFORMERS FROM STORE TO SITE,,

FIXING OF CHANNELS , SUPPORTING ANGLES

, BRANCING CROSS ARMS CLAMPS ,ANTI

CLIMBING DEVICES ,DANGER BOARDS

CONDUCTOR AND CABLE WIRING ETC

COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING OF POLE WITHOUT COST OF

NUTS & BOLTS, PAINTS AS PER STANDARD

SPECIFICATIONBUT EXCLUDING OF

ERECTION OF GUY SET AND EARTHING

(A) PSC POLE 8 MTR LONG AND 200 KG 75 NO 8681

(B)PSC POLE 10 MTR LONG AND 200 KG 5 NO 9808

(C) STEEL POLE 9 TO 11 MTR 3 NO 10151

ERECTION OF GUY SET INCLUDING

EXCAVATION OF PITS & REFILLING OF EARTH

AS PER STANDARD SPECIFICATION WITH

6 STAY CLAMPS , STAY WIRE , ANCHOR ROAD , 250 NO 537

TURN BUCKLE , EYE BOLT , GUY INSULATOR

CEMENT CONCRETE BLOCK ETC BUT

EXCLUDING CONCREATING WITHOUT COST

OF NUTS AND BOLTS

CONCRETING OF POLES , GUYS ,ETC.

7 INCLUDING COST OF CEMENT, SAND, METAL 3 CMT 7668

(1:2:4) AND WATER ETC. AS PER STANDARD

SPECIFICATION

ERECTION OF COIL TYPE / CI PLATE TYPE

8 EARTHING INCLUDING COST OF COAL, SALT 250 NO 579

ETC BUT WITHOUT COST OF NUTS &BOLTS,GI

WIRE AS PER STANDARD SPECIFICATION(10

KG SALT + 10 KG COAL).

STRINGING Of ALL TYPE CONDUCTOR CONDUC

(EXCEPT DOG CONDUCTOR) FOR 11/22 KV &

LT LINES INCLUDING FIXING OF INSULATORS, KM

BINDING JUMPERING ETC

PROVIDING GUARDING TO HT / LT LINE

ON ROAD / RAIL CROSSING WITHOUT COST

OF NUTS AND BOLTS.

LAYING OF OVERHEAD LT CABLE FOR ROAD

CROSSING,HT LINE CROSSING ROAD AND

TELEPONE LINE CROSSING ETC.(PER SPAN)

100 NUMBER 251

WITHOUT COST OF NUT &BOLTS,.JUSTI KHILA

STRINGING OF DOG CONDUCTOR ( 100 MM2 ONE

ACSR/100 MMM2 AAAC) FOR 11/22 K & LT LINE CONDUC

INCLUDING FIXING OF

INSULATORS,BINDINGG,JUMPERING ETC. KM

STRINGING OF LT ABC OF FOLLOWING SIZE

INCLUDING FITTING OF ALL ACESSORIES I.E.

SPECIAL DESIGN SUSPENSION/TENSION

CLAMP , FIXING CROSS ARM, LT SHACKLE

INSULATOR ETC. FOR FIXING OF MESSENGER

13 WIRE AND TO PROVIDE SERVICE 10 KM 9208

CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS

THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE EXCLIDING COST OF

ACESSORIES(1 X 35 MM2 + 1 X 25 MM2 , 1 X

MM2 + 1 X 35 MM2 OR ANY SIZE OF SINGLE

PHASE TWO WIRE LT AB CABLE)

STRINGING OF 11 KV ABC OF FOLLOWING

SIZE INCLUDING FITTING OF ALL

ACESSORIES I.E. SPECIAL DESIGN

SUSPENSION/TENSION CLAMP , FIXING

CROSS ARM,BINDING TO PIN

INSULATOR,PREPARING SHAKLE POINT 10 KM 43155

JUMPERS ETC.FOR FIXING OF MESSENGER

WIRE AS REQUIRED AND DIRECTED BY

ENGINEER IN CHARGE.(3 X 95 MM2 + 1 X

MM2 , 3 X 70 MM2 + 1 X 70 MM2 OR ANY SIZE

OF HT AB CABLE)

STRINGING OF LT ABC (3.5 CORE) OFF

FOLLOWING SIZE INCLUDING FITTING OF ALL

ACESSORIES I.E. SPECIAL DESIGN

SUSPENSION/TENSION CLAMP , FIXING

CROSS ARM, LT SHACKLE INSULATOR ETC.

FOR FIXING OF MESSENGER WIRE AND TO

PROVIDE SERVICE CONNECTION ON AERIAL

14 BUNCHCABLE BY INSULATED PIERCEING 10 KM 23016

CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED

& DIRECTED BY ENGINEER IN CHARGE

EXCLIDING COST OF ACESSORIES(3 X 50 MM2

+ 1 X 25 MM2 OR ANY SIZE OF LT 3.5 CORE AB

SELF TIGHTENING ANCHORING (DEADEND)

18 CLAMP CLAMP WITH POLE BRACKETUSING 35 NO 149

STAILNESS STEEL STRAP & BUCKLE

SELF LOCKING SUSPENSION CLAMP WITH

19 POLE BRACKET USING STAILNESS STEEL 35 NO 165

STRAP &BUCKLE

PRE INSULATED MID SPAN JOINTS FOR

20 PHASE & NEUTRAL FOR 16 SQ MM2 TO 50 35 NO 149

ERECTION OF SUPPORT POLE (PSC/STP/RSJ)

FOR STAY I.E. STUD POLE

REPLACEMENT OF DETERIOIRATED /

PROVIDING NEW LT DIST. BOX UP TO 100 KVA

22 CAPACITY WITH MAKING ALL CONNECTION 20 NO 1171

CRIMPING OF LUGS,NEUTRAL ETC.,&

CREDITING IT TO STORE

REPLACEMENT OF DETERIOIRATED /

PROVIDING NEW LT DIST. BOX ABOVE

23 KVA CAPACITY WITH MAKING ALL 20 NO 2107

CONNECTION CRIMPING OF LUGS,NEUTRAL

ETC.,& CREDITING IT TO STORE

DISMENTALLING OF TRANSFORMER CENTER(

8 MTR PSC POLE ) WITH CREDITING OF

FABRICATION &

TRANSFORMER AT STORE & STACKING OF

POLE AT SAFE LOCATION ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL

STORE(TRANSFORMER CREDITING TO

DEPARTMENTAL STORE ) POLE &

TRANSFORMER SHOULD BE IN CONDITION AS

DISMENTALLING OF TRANSFORMER CENTER(

8 MTR PSC POLE )( WITHOUT TRANSFORMER

) WITH CREDITING OF FABRICATION AT

STORE & STACKING OF POLE AT SAFE

LOCATION ON ROAD SIDEOR CREDITING TO

DEPARTMENTAL STORE

REMOVAL/DISMENTALLING OF EXISTING

HT/LT LINE (34 MM2 TO 55 MM2 SIZE

CONDUCTOR) AND CREDITING TO PER

26 STORE.CONDUCTOR HAS TO DISMENTAL 5 COND. 1010

FROM SHACKLE TO SHCKLE POLE, WITH PER KM

MINIMUM NOS. OF CUT PIECE AS

INSTRUCTION OF ENGINEER INCHARGE

REMOVAL/DISMENTALLING OF EXISTING

HT/LT LINE (ABOVE 55 MM2 SIZE

CONDUCTOR) AND CREDITING TO PER

27 STORE.CONDUCTOR HAS TO DISMENTAL 5 COND. 2326

FROM SHACKLE TO SHCKLE POLE, WITH PER KM

MINIMUM NOS. OF CUT PIECE AS

INSTRUCTION OF ENGINEER INCHARGE

CARTING OF PSC POLE AT DESTINATION

(PER POLE) MORE THAN 4 KM & UPTO

WORK DESTINATION

POLE BROKEN CHARGES IN EMERGENCY

SITUATION(NECESSARY APPROVAL TAKEN PER

BY THE (EE) DIVISION BEFOR APPROVE THE POLE

PAINTING/WRITING CONSUMER NO. ON

34 SMB/MMB (URBAN) (WITH LETTER SIZE 200 NO 11

HEIGHT 40MM * WIDTH 8MM)

PAINTING CONSUMER NO. ON MMB (RURAL)

35 (WITH LETTER SIZE HEIGHT 40MM * WIDTH 200 NO 21

RESTRINGING OF HT & LT LINE (34MM2 TO 1 WIRE

36 55MM2) CONDUCTOR/COATED CONDUCTOR 200 106

WITH NEW PIN BINDING PER SPAN

RESTRINGING OF HT & LT LINE (ABOVE

37 55MM2) CONDUCTOR/COATED CONDUCTOR 200 1 WIRE 106

WITH NEW PIN BINDING PER SPAN

RESTRINGING OF 11 KV ARIEAL BUNCH

38 CABLE (ALL SIZE) PER SPAN WITH LABOUR OF 50 PER 316

FITTING OF ACCESSORIES. SPAN

39 DISMANTLING OF 8 MTR PSC POLE IN USABLE 120 NO 562

CONDITION WITH CREDITING OF

FABRICATION AT STORE & STACKING OF

POLE AT SAFE LOCATION ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE.

REPLACEMENT OF 11KV PIN INSULATOR BY

40 NEW PIN INSULATOR/COMPOSITE PIN 200 NO 45

PIN BINDING OF CONDUCTOR WITH 11/22 KV

41 PIN INSULATOR AS PER INSTRUCTION OF 150 PER POLE 26.50

ENGINEER IN CHARGE.

PIN BINDING OF CONDUCTOR WITH LT

42 SHACKLE INSULATOR AS PER INSTRUCTION 150 PER POLE 24

OF ENGINEER IN CHARGE.

RE-JUMPERING OF HT/LT LINE FOR SHACKLE

200 PER POLE 94

REPLACEMENT OF 11KV DISC INSULATOR BY

44 NEW DISC INSULATOR/COMPOSITE DISC 200 NO 164

CONVERTING PIN POINT TO SHAKLE POINT

45 INCLUDING DISMENTALING & RESTRINGING

ETC,(INCLUDING COST OF NUTS AND BOLTS)

RE-TIGHTENING OF LOOSE GUY SET IN ALL

46 ASPECTS/ADJUSTMENT THE TENTION IN 250 NO 175

TRIMMING AND CUTTING OF BIGGER SIZE

TREE BRANCHES / WHOLE TREE PER

OBSTRUCTUING HT/LT LINE (DURING MASS

MAINTENANCE ACTIVITIES 8 HRS. DURATION)

TRIMMING AND CUTTING OF BIGGER SIZE

TREE BRANCHES / WHOLE TREE

OBSTRUCTUING HT/LT LINE (DURING LOCAL

50 PER DAY 375

MAINTENANCE ACTIVITIES)

CUTTING OF TREE BRANCHES OBSTRUCTING HT/LT

LINE ON ONE TREE(SIZE OF BRANCH ABOVE 6 INCH PER

DIAMETER) TREE

TRIMMING AND CUTTING OF TREE

BRANCHES OBSTRUCTUING HT/LT LINE WITH

50 MINIMUM 2 LABOURS WITH TREE CUTTING 10 PER DAY 3000

MACHINE & LADDER VEHICLE(DURING MASS

MAINTENANCE ACTIVITIES / DISASTER)

REPLACEMENT OF LT SHACKLE INSULATOR

BY NEW ONE.

REFIXING OF V CROSS ARM IN PROPER

REPLACEMENT OF V CROSS ARM BY NEW

ONEWITH PAINTING

RE-FIXING OF TOP FITTING IN PROPER

REPLACEMENT OF TOP FITTING BY NEW ONE.

STRAIGHTING OF TILLED PSC/RSJ POLE AT

STRAIGHTING OF TILLED PSC/RSJ POLE AT

TENSION POINT

NUMBERING OF POLE WITH PAINT BY

57 PREPARING BACK GROUNG OF ONE COLOUR 50 NO 50.50

AND HAVE LETTERING(HEIGHT 3” * WIDTH

0.5”) AS PER INSTRUCTION OF ENGINEER

INCHARGE (COLOUR MUST HAVE ISI MARK &

TO BE PROVIDED BY CONTRACTOR)

PAINTING OF STEEL/RSJ POLE 100*116 OF

TO 13 MTR (WITHOUT FABRICATION )BY TWO

COAT OF RED OXIDE, TWO COAT OF SILVER

COLOUR (APPROVED ISI MARK)

PAINTING OF ALL STEEL/MS FABRICATED

MATERIAL FITTED ON DOUBLE POLE

STRUCTURE PSC/RSJ POLE BY TWO COAT OF

RED OXIDE, TWO COAT OF SILVER COLOUR

(APPROVED ISI MARK)WITHOUT

X’MER.(EXCLUDING RSJ POLE)

PAINTING OF ALL STEEL/MS FABRICATED

MATERIAL FITTED ON DOUBLE POLE

STRUCTURE PSC/RSJ POLE WITH X’MERBY

TWO COAT OF RED OXIDE, TWO COAT OF

SILVER COLOUR (APPROVED ISI

MARK).(EXCLUDING RSJ POLE)

PAINTING OF STEEL/MS FABRICATED

MATERIAL OF PC/RSJ POLE ON HT LINE BY

TWO COAT OF RED OXIDE, TWO COAT OF

SILVER COLOUR.(APPROVED ISI MARK)

PAINTING OF STEEL/MS FABRICATED

MATERIAL OF PC/RSJ POLE ON HT POLE

62 EXTENSION ON HT LINE BY TWO COAT OF 10 NO 171

RED OXIDE, TWO COAT OF SILVER

COLOUR.(APPROVED ISI MARK)

PAINTING OF STEEL/MS FABRICATED

MATERIAL OF PC/RSJ POLE ON 4W LT LINE BY

TWO COAT OF RED OXIDE, TWO COAT OF

SILVER COLOUR.(APPROVED ISI MARK)

PAINTING OF STEEL/RSJ POLE 150*150 OF

TO 13 MTR WITHOUT FABRICATION BY TWO

COAT OF RED OXIDE, TWO COAT OF SILVER

COLOUR.(APPROVED ISI MARK)

DISMANTLING OF 10 MTR PSC POLE IN

USABLE CONDITION WITH CREDITING OF

65 FABRICATION AT STORE & STACKING OF 10 NO 1233

POLE AT SAFE LOCATION ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE.

ERECTION OF GI PIPE/CI PLATE TYPE

EARTHING INCLUDING COST OF COAL,SALT

ETC.BUT WITH OUT COST OF NUTS &

BOLTS,GI PIPE,CI PLATE ,GI WIRE AS PER

STANDARD SPECIFICATION(20 KG SALT +

PROVIDING MATERIAL FOR STRIP TYPE

EARTHING FOR TRANSFORMER CENTER AND

FIRST 20 POLES OF 11KV FEEDER:

(1)25*3 MM GI 90’ HOT DIP STRIP, TOTAL

LENGTH OF STRIP IS 9 MTRS WITH 4 METER

FROM G.I HOT SLEEVE INSULATION COATED

(2)300*300*10 MM CL EARTHING PLATE WITH

TWO NOS. HOLE FOR GI STRIP FITTING.

(3) STANDARD GAUGE 2’’ PVC PIPE 2 METER.

(4) NUT BOLT AS PER REQUIRED SIZE.

LABOUR WORK FOR GI INSULATED GI STRIP

EARTHING FOR BODY AND NEUTRAL OF

TRANSFORMER CENTER AND FIRST 20 POLES UNDER

THARAD DO FOR 11 KV FEEDERS.

SCOPE OF WORK:

(1)EACH EARTH TERMINAL SHALL BE PROVIDED BY

DIGGING A PIT OF 1800MM*1200MM. THE PIT

SHELL BE AT LEAST 1200MM FAR FROM THE

NEAREST SUPPORT. THE PIT WILL BE FILLED IN BY

ALTERNATE LAYERS OF WOOD CHARCOAL AND SALT

CUBES EACH OF 300MM TILL 1500MM FROM

BOTTOM OR WILL BE FILLED BETONIES POWDER,

REMAINING 300MM SHALL BE REFILLING BY DUG

(2)THE CONTRACTOR SHALL HAVE TO PROVIDE

WOOD CHARCOAL (25KG APPROX.) AND SALT

CUBES( 25KG APPROX.) OR BETONIES POWDER(50

KG APPROX.) HIS OWN.EARTHING SHOULD BE DONE

AS PER REC STANDARD & SPECIFICATION. EARTHING

VALUE MUSTBE LESS THAN 5 OHMS.

(3) STRIP IS TO BE FITTED WITH V CROSS ARM SIDE

CLAMP WITH BOLT AND GI WIRE FROM THERE TO

TOP FITTING WITH BOLT. EXPOSED PART OF STRIP

SHOULD BE PASSED THROUGH A RIGID PVC PIPE (2

METERS APPROX).

ERECTION OF STREET LIGHT FIXTURE

COMPLETE WITH CLAMPS BRASS

NIPPLE,BRASS HOLDER TECK WOOD

69 BUSH,REFLECTORS FUSE,WIRING ETC. WITH 10 NO 344

OUT COST OF NUTS & BOLTS AS PER

STANDARD SPECIFICATION BUT EXCLUDING

COST OF MATERIALS

ERECTION OF SINGLE POLE STRUCTURE

WITH MOUNTING OF AB SWITCH,HG

FUSES,TRANSFORMERS,LA,DISTRIBUTION

BOX ON 8 MTRS 200 KG AND PSC POLES

INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH,CARTING OF

70 TRANSFORMERS FROM STORE TO 10 NO 4340

SITE,FIXING OF CHANNELS,SUPPORTING

ANGLES,BRACINGS CROSS ARMS

CLAMPS,ANTICLIMBING DEVICES,DANGER

BOARDS,CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE

AND NUMBERING OF POLES WITHOUT COST

OF NUTS & BOLTS, PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SETS AND EARTHING.

STAINLESS STEEL OF SIZE STRAP 20 MM *0.7

MM & BUCKLE WIDTH 20 MM

LABOUR CHARGES FOR FIXING OF END

PROVIDING AND FIXING OF OUTDOOR CABLE

73 JOINING KIT SUITABLE FOR 3C X 5 NO 5982

120/150/185/240/300 SQ.MM. 11 KV PILC CABLE

PROVIDING AND FIXING OF STRAIGHT JOINT

SUITABLEFOR OUTDOOR END TERMINATION

XLPE CABLE

LABOUR CHARGES FOR FIXING HEAT

SHRINKABLE TYPE CABLE JOINT FOR 11 KV

1C*70 SQ.MM./1C*95 SQ.MM. AB CABLE (1

LABOUR CHARGES FOR FIXING HEAT

SHRINKABLE TYPE CABLE JOINT FOR 11 KV

1C*70 SQ.MM./1C*95 SQ.MM. AB CABLE

INCLUDING RESTRINGING OF HT AB CABLE

PROVIDING & FIXING HEAT SHRINKABLE

77 TYPE CABLE JOINING KIT SUITABLE FOR 11 15 NO 3100

KV 3C* 70 SQ.MM./3C*95 SQ.MM. AB CABLE

FOR OUTDOOR TERMINATION

Note: The rates are exclusive of nut bolt and GST. UGVCL will supply the required nut-bolts. If not supplied by

UGVCL THEN Rs.103.33 per KG with GST provided. THIS ERECTION WORK ORDER TO BE TRANSFER IN ANY

SUBDIVISION UNDER THARAD DO AS PER REQUIREMENT AND INSTRUCTION OF EE THARAD.(AS PER COST

Amount Without GST 36,11,385.00/-

WELFARE CESS ESTIMATED COST @ 1% 36,113.85/-

A Total Rs. 43,04,048.64/-

B Bidder’s Offer (+ / -) in %

C Grand Total = A +/- (A x B)

C Grand Total = A +/- (A x B)

D SAC Code:

E Final Offer (in Rs.):

F Final Offer (in Words):

The rates quoted are_______% above/bellow to the scheduled rates as shown in SCHEDULE-B above.

Thus, my tender value is Rs. __________________ (in words Rs.________________________)

Above mentioned rate is inclusive / exclusive of 1% Welfare Cess& 18 % GST.

SIGNATURE OF CONTRACTOR EXECUTIVE ENGINEER

WITH SEAL UGVCL, THARAD DO