Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹22.5 LAccepted-AOC NH 31 GAIRKATA PO SAKOAJHORA DIST JALPAIGURI W B PIN 735212 | JALPAIGURI | WEST BENGAL | 735212 | L-1 | Accepted-AOC Being L 1 | |
| 2 | L-2₹24.7 L+₹1.7 L (7.60%)Rejected-Finance | L-2 | Rejected-Finance Being L 2 | |
| 3 | L-3₹25.9 L+₹2.9 L (12.6%)Rejected-Finance DEPOPARA PO BINNAGURI PS BANARHAT DIST JALPAIGURI WEST BENGAL PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L-3 | Rejected-Finance Being L 3 | |
| 4 | L-4₹29.7 L+₹6.8 L (29.5%)Rejected-Finance POST BINNAGURI DIST JALPAIGURI W B PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L-4 | Rejected-Finance Being L 4 | |
| 5 | L-5₹31.9 L+₹8.9 L (38.8%)Rejected-Finance | L-5 | Rejected-Finance Being L 5 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
18 Oct 2021, 6:00 pmClosed
GE North Binnaguri
Post Binnaguri Dist Jalpaiguri West Bengal
REPAIR AND MAINTENANCE OF WOODEN FURNITURES AND GI CHARPOY INCLUDING PAINTING POLISHING AT BINNAGURI UNDER GE NORTH BINNAGURI
2021_MES_477486_1
NIT No. 8701/33/2021-2022/ 02 / E8
Open Tender
Miscellaneous Works
Item Rate
270 days
BINNAGURI
Class D Category a i
8 documents required · 8 mandatory
₹500
Yes
GE North Binnaguri
₹70,000
Yes
16 Dec 2021
24 Sept 2021
20 Oct 2021
24 Sept 2021
18 Oct 2021
6 Oct 2021
Amount
WOODEN FURNITURE Repairs to Bed Hard Ply top for the following :- Removing old unserviceable fitting and fixture of Bed Hard plywood top such as Head board, Foot Board, Long Rail, sttiffner, plywood , MS clamps etc and supply and refixing with new items of Best quality 2nd Class HW (Hollock/Tita Champa/SAL) and minor repair applying French Polish glossy finished to match with existing surface complete all as specified and shown on drawing. (Drawing No: 213/246)
Top Plywood 12mm thick, 7 No ply, ISI marked conforming to IS: 303-1989. (Make-Green Ply/Kit Ply,Century/Bhutan Board)
Long rails
Short rails made from old long rail obtain from taking down
Stiffeners in centre of both leg rail 40 mm x 30 mm
Veneered plywood Gde-1 quality (BWR resin) 3mm thick (one side teak face decorative type for Head Board, ISI marked (Make-Green Ply/Kit Ply,Century/Bhutan Board)
Veneered plywood Gde-1 quality (BWR resin) 3mm thick (one side teak face decorative type for Foot Board, ISI marked (Make-Green Ply/Kit Ply,Century/Bhutan Board)
Mild Steel clamps old refixing in new position with new screws.
Mild Steel clamps new of existing size and shape including appying two coat of synthetic enamel paint (1st quality) over a coat of zinc chrome red oxide primer.
Repairs to Chair Writing for the following :- Removing old unserviceable fitting and fixture of Chair Writing without disturbing to the other parts such as legs,rails, stiffiners, Hand rest etc and supply and fixing with new items of Best quality 1st Class HW (Teak)) and minor repair applying French Polishone or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD-20(M)/ 280)
Rear legs 1st class hardwood (TeaK)
Front legs. 1st class hardwood (TeaK)
Front /rear rails of seat frame .1st class hardwood (TeaK)
Right/ left side rails of seat frame . 1st class hardwood (TeaK)
Stiffener.bottom 1st class hardwood (TeaK)
Stiffener back rest 1st class hardwood (TeaK)
Arm rest. 1st class hardwood (TeaK)
Taking out unserviceable plastic cane from seat frame of Chair writing and Supply and fixed for weaving the seat of Chair in Godrej pattern with new 2 mm wide half round 0.40mm thickness and 4mm for border approved quality complete all as specified and shown in drawing. (Drawing No. FD-20 (M)/280)
Repairs to Chair dining for the following :- Removing old unserviceable fitting and fixture of Chair dining without disturbing to the other parts such as legs,rails, stiffiners etc and supply and fixing with new items of Best quality 1 st class hardwood (Teak) and minor repair applying French Polishone or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD- 16(M)/228/279/1105)
Rear legs 1st class hardwood (TeaK)
Front legs.1st class hardwood (TeaK)
Front /Back/ side rails of seat frame . 1st class hardwood (TeaK)
Leg Stiffener 1st class hardwood (TeaK)
Back batten 1st class hardwood (TeaK)
Taking out unserviceable plastic cane from seat frame of Chair dining and Supply and fixed for weaving the seat of Chair in Godrej pattern with new 2 mm wide half round 0.40mm thickness and 4mm for border approved quality complete all as specified and shown in drawing. (Drawing No. FD-16(M)/228/279)
Repairs to Chair wooden bottom without arms for the following :- Removing old unserviceable fitting and fixture of Chair Writing without disturbing to the other parts such as legs,rails, stiffiners, Hand rest etc and supply and fixing with new items of Best quality 1st Class HW (Teak)) and minor repair applying French Polishone or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD-56(M)/ 225)
Rear legs 1st class hardwood (TeaK)
Front legs. 1st class hardwood (TeaK)
Front /rear rails of seat frame .1st class hardwood (TeaK)
Right/ left side rails of seat frame . 1st class hardwood (TeaK)
Stiffener.bottom 1st class hardwood (TeaK)
Stiffener back rest 1st class hardwood (TeaK)
Seat Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989
Repairs to Chair Easy for the following :- Removing old unserviceable fitting and fixture of Chair Easy without disturbing to the other parts such as legs,rails, stiffiners, Hand rest etc and supply and fixing with new items of Best quality 1st Class HW (Teak) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD- 17)M)/ 229)
Rear legs 1st class hardwood (TeaK)
Front legs. 1st class hardwood (TeaK)
Top rails .1st class hardwood (TeaK)
Side Top rails (Left/Right) .1st class hardwood (TeaK)
Rear Top rails (Left/Right) .1st class hardwood (TeaK)
Side bottom rails (Left/Right) .1st class hardwood (TeaK)
Front/ Rear bottom rails.1st class hardwood (TeaK)
Arm rest. 1st class hardwood (TeaK)
Taking out unserviceable plastic cane from seat frame of Chair Easy and Supply and fixed for weaving the seat of Chair in Godrej pattern with new 2 mm wide half round 0.40mm thickness and 4mm for border approved quality complete all as specified and shown in drawing. (Drawing No. FD-20 (M)/280)
Repairs to Table 900 mm x 900 mm x 760 mm (Table 3'x3') for the following :- Removing old u/s fitting /Fixture of Table 900 mm x 900 mm disturbing to the other parts such as legs,rails, top, stiffiners etc and supply and fixing with new items of Best quality 1st Class HW (Teak) and minor repair applying French Polishone or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : 88(M) / 201)
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5mm thick timber beading around the edging.
Long rails 1st class hardwood (TeaK)
Legs 1st class hardwood (TeaK)
Side/short rails 1st class hardwood (TeaK)
Repairs to Table 900 mm x 600 mm x 760 mm (Table 3'x2') with/without Drawer for the following :- Removing old unserviceable fitting and fixture of Table 3' x 2' with and witout drawer without disturbing to the other parts such as legs,rails, top,stiffiners, Drawer etc and supply and fixing with new items of Best quality 1st class HW (Teak) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : 41(M)/42(M)/55(M)/231/ 283/284
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5mm thick timber beading around the edging.
Drawer as per existing shape and size made out of 1st class hardwood (Teak) complete all as specified and as directed.
Legs 1st class hardwood (TeaK)
Long rail 1st class hardwood (TeaK)
Side rails 1st class hardwood (TeaK)
Stiffeners 1st class hardwood (TeaK)
25 mm dia chroumium plated Knob with brass nuts and bolts
Repairs to Table 600 mm x 600 mm x 760mm (Table 2'x2') for the following :- Removing old unserviceable fitting and fixture of Table 600x 600mm disturbing to the other parts such as legs,rails, top, stiffiners etc and supply and fixing with new items of Best quality 2nd Class HW (Hollock/Tita Champa) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : 95(M) / 273)
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5mm thick timber beading around the edging.
Long rails 1st class hardwood (TeaK)
Side/ short rails 1st class hardwood (TeaK)
Legs 1st class hardwood (TeaK)
Repairs to Teapoy for the following :- Removing old unserviceable fitting and fixture of Teapoy without disturbing to the other parts such as legs,rails, top,stiffiners etc and supply and fixing with new items of Best quality 1 st class hardwood well seasoned (Teak) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : 34(M)/278)
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class harwood (teak) beading around the edging.
Legs 1st class hardwood (TeaK)
Long rails 1st class hardwood (TeaK)
Side rails 1st class hardwood (TeaK)
Repairs to Peg Table for the following :- Removing old unserviceable fitting and fixture of Pag table without disturbing to the other parts such as legs,rails, top,stiffiners etc and supply and fixing with new items of Best quality 1 st Class Hard wood wellseasoned (TEAK) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 25(M)/236/277/384)
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1 st class hardwood (teak) beading around the edging.
Long rails 1st class hardwood (TeaK)
Short rails 1st class hardwood (TeaK)
Legs 1st class hardwood (TeaK)
Repairs to Table Centre for the following :- Removing old unserviceable fitting and fixture of Table centre without disturbing to the other parts such as legs,rails, top,stiffiners etc and supply and fixing with new items of Best quality 1 st class hardwood (Teak) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 29(M)/235/ 274)
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class haedwood beading around the edging.
Legs 1st class hardwood (TeaK)
Long rails 1st class hardwood (TeaK)
Side rails 1st class hardwood (TeaK)
Repairs to Table Writing for the following :- Removing old unserviceable fitting and fixture of Table Writing without disturbing to the other parts such as legs,rails, top,stiffiners,Drawer etc and supply and fixing with new items of Best quality 1st class hardwood well seasoned (Teak) and 4mm thick wooden beading whereever required and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 33(M)/249/275 )
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.
Sides of size 600mm x 560mm with 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.
Shutter of size 450mm x 350mm with 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging including 50 mm long brass hinges
Back 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989 complete all as specified and as directed.
Shelve of cupboard 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.
25 mm dia chroumium plated Knob with brass nuts and bolts
Legs (front/Rear) 1st class hardwood (TeaK)
Short rail 1st class hardwood (TeaK)
Bottom Stiffeners 1st class hardwood (TeaK)
Taking out drawer from existing position and refixing the same after minor reppair like tighting thr screw wooden pin complete all as specified.
Repairs to Table Bed side for the following :- Removing old unserviceable fitting and fixture of Table bed side without disturbing to the other parts such as top,legs,side, etc and supply and fixing with new items with 2nd class hardwood (Kalasiris) and 4mm thick wooden beading whereever required and minor repair applying of French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : 28(M)/276 )
Top/ bottom of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood (Teak) beading around the edging.
Side of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood (Teak) beading around the edging.
Back Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989
Shelve 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood beading around the edging.
Stiffeners in centre of both leg rail 40 mm x 30 mm
Repairs to Table dining 8 person for the following :- Removing old unserviceable fitting and fixture of Table Dining 6 Person without disturbing to the other parts such as legs,rails, top, stiffiners etc and supply and fixing with new items of Best quality 1st class hardwood (Teak) and minor repair applying of French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : 30(M)/273)
Top of 18 mm thick particle board conforming to IS-3087-2005 with 1 mm thick plastic laminated sheet teak face shead on top using approved adhesive including 4mm thick 1st class hardwood (Teak) beading around the edging.
Legs 1st class hardwood (TeaK)
Long rail 1st class hardwood (TeaK)
Side rails 1st class hardwood (TeaK)
Repairs to Table dining 6 person for the following :- Removing old unserviceable fitting and fixture of Table Dining 6 Person without disturbing to the other parts such as legs,rails, top, stiffiners etc and supply and fixing with new items of Best quality 1st class hardwood (Teak) and minor repair applying of French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD :30(M)/ 239/ 273 )
Top of 18 mm thick particle board conforming to IS-3087-2005 with 1 mm thick plastic laminated sheet teak face shead on top using approved adhesive including 4mm thick 1st class hardwood (Teak) beading around the edging.
Legs 1st class hardwood (TeaK)
Long rail 1st class hardwood (TeaK)
Side rails 1st class hardwood (TeaK)
Repairs to Table Drassing Ladies for the following :- Removing old unserviceable fitting and fixture of Table drassing Ladies without disturbing to the other parts such as top,side, glass, mirror,knob etc and supply and fixing with new items and 5 mm thick wooden beading whereever required and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD-32(M)/ 251)
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5 mm thick timber beading around the edging.
Side of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5 mm thick timber beading around the edging.
Bottom of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5 mm thick timber beading around the edging.
Back of 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989 complete all as specified and as directed.
Drawer 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989 front side with 18 mm thick pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 one No 25mm knob of required colour complete all as specified and as directed.
Mirror frame made out of 1st class hardwood (Teak)
Mirror 5.5 mm thick electro copper plated with 6mm thick plywood on back side with key plate (Modi/Atul Saint Gobbin )
Legs 1st class hardwood (TeaK)
25 mm dia chroumium plated Knob with brass nuts and bolts
Aluminum channel for sliding glass with 5 mm thickness ordinary glass
Repairs to Table Drassing Gents with mirror for the following :- Removing old unserviceable fitting and fixture of Table drassing Ladies without disturbing to the other parts such as top,side, glass, mirror,knob etc and supply and fixing with new items and 5 mm thick wooden beading whereever required and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD- 31(M)/230)
Top of 12mm thick, 9 No ply, ISI marked conforming to IS: 303-1989 fixed with 5 mm thick timber beading around the edging and cover with 1mm thick plastic laminated sheet teak face colour fixed approved adhisive.
Back of 12mm thick, made out of 1st class hardwood (Teak)
Drawer 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989 front side with 18 mm thick pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 one No 25mm knob of required colour complete all as specified and as directed.
25 mm dia chroumium plated Knob with brass nuts and bolts
Bottom of 12 mm thick made out of 1st class hardwood (Teak)
Sides of 12 mm thick made out of 1st class hardwood (Teak)
Back of 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989 complete all as specified and as directed.
Mirror frame made out of 1st class hardwood (Teak)
Mirror 5.5 mm thick electro copper plated with 6mm thick plywood on back side with key plate (Modi/Atul Saint Gobbin )
Repairs to Hat stand with mirror for the following :- Removing old unserviceable fitting and fixture of Hat stand with mirror without disturbing to the other parts such as Particle Board,matel peg,mirror etc and supply and fixing with new items of Best quality and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 233)
Base of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5 mm thick timber beading around the edging.
Chromium plated metal peg 120 mm long
Mirror 5 mm thick electro copper plated of size 300mm x 460 mm (Modi/Atul Saint Gobbin )
Repairs to Almirah Mess Utensil for the following :- Removing old unserviceable fitting and fixture of Almirah Mess Utensil without disturbing to the other parts such as top,legs,side, etc and supply and fixing with new items with 2nd class hardwood (Kalasiris) and 4mm thick wooden beading whereever required and minor repair applying of French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : 39(M)
Door shutter Left/Right of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood (Teak) beading around the edging and brass hinges 50mm size.
Back Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 9mm thick, 7 No ply, ISI marked conforming to IS: 303-1989
Legs 2nd class hardwood (Kalasiris)
Long rail 2nd class hardwood (Kalasiris)
Side rails 2nd class hardwood (Kalasiris)
Aluminium anodised D handle of size 100 mm
Repairs to Book Case for the following :- Removing old unserviceable fitting and fixture of Book Case without disturbing to the other parts such as legs,rails, top,stiffiners,Drawer etc and supply and fixing with new items of Best quality 1st class hardwood well seasoned (Teak) and 4mm thick wooden beading whereever required and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 45(M)/237 )
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.
Bottom of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.
Shutter with 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging including 50 mm long brass hinges
Sides with 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.
Back 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989 complete all as specified and as directed.
Partition of bookcase 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.
25 mm dia chroumium plated Knob with brass nuts and bolts
Legs (front/Rear) 1st class hardwood (TeaK)
Long rail 1st class hardwood (TeaK)
Short/ Side rails 1st class hardwood (TeaK)
Repairs to Side board for the following :- Removing old unserviceable fitting and fixture of side board without disturbing to the other parts such as top,legs,side, top,drawers etc and supply and fixing with new items with 1st class hardwood (teak) and 4mm thick 1st class hardwood beading whereever required and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 26(M)/241/ 1112)
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class harwood (Teak) beading around the edging.
Side of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5mm thick timber beading around the edging.
Back Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989
Shutter 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood (Teak) beading around the edging. with one knob 25mm dia complete all as specified and as directed.
Shelve 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5mm thick timber beading around the edging. complete all as specified and as directed.
Drawer 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood beading around the edging and 6mm thick plywood bottom with one knob 25mm dia complete all as specified and as directed.
Inside partition 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood beading around the edging with one knob 25mm dia complete all as specified and as directed.
Bottom 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick timber beading around the edging complete all as specified and as directed.
Legs 1st class hardwood (TeaK)
Long rail of bottom 1st class hardwood (TeaK)
Short rail of bottom 1st class hardwood (TeaK)
25 mm dia chroumium plated Knob with brass nuts and bolts
Removing of existing unserviceable nylon newar from charpoy , tightening the frame and Supply and fixed new ply wood 12mm thick BWR, 9 No ply, ISI marked, conforming to IS: 303-1989 (size Approx 1950 mm x 900 mm) with 6mm dia 65mm long nut & bolts with washer (total 10 Nos) including drilling 03 Nos holes on each long rails and 02 Nos holes on short rails all as specified and as directed. (Drawing No: FD: 220 )
Removing of existing unserviceable plywood top and Supply and fixed new ply wood 12mm thick BWR, 9 No ply, ISI marked, conforming to IS: 303-1989 (size Approx 1950 mm x 900 mm) with three stiffener of size 900mm 50mm x 6mm MS flat iron and applying two coats od black synthetic enemal paint over a coat of zinc chrome metal primer and 6mm dia 75mm long nut & bolts in support counter sunk on long rail of GI charpoy complete all as specified and as directed. (Drawing No: FD: 220 )
Taking out broken unserviceable shortrails from Charpoy GI pipe and Supply and fixing new long rails 1940 mm long duly threaded at both end out of GI tube 32mm dia medium grade all as spacified (Drawing No: FD: 220 )
Taking out broken unserviceable long rails from Charpoy GI pipe and Supply and fixing new short rails 900 mm long duly threaded at both end out of GI tube 32mm dia medium grade all as spacified (Drawing No: FD: 220 )
Taking out broken unserviceable leg from Charpoy GI pipe and Supply and fixing new leg duly threaded at both end out of GI tube 32mm dia medium grade all as spacified (Drawing No: FD: 220 )
Taking out unserviceable short rails from Charpoy GI pipe and making short rails for GI charpoy made out of from broken long rails obtained from Sl No.24 above including cutting & threading rails and fixing in replacement all as spacified and directed. (Drawing No: FD: 220 )
Taking out unserviceable legs from Charpoy GI pipe and making leg for GI charpoy made out of from broken short rails obtained from Sl No.25 above including cutting & threading rails and fixing in replacement all as spacified and directed. (Drawing No: FD: 220 )
Taking out unserviceable elbow and Supply and fixing new GI elbow 32mm dia, three way medium grade, ISI marked all as spacified and directed. (Drawing No: FD: 220 )
Taking out unserviceable check nut from long rails and Supply and Fixing new check nuts of 6mm wide, 32mm dia all as specified and as directed. (Drawing No: FD: 220 )
Taking out old rusted/damaged/broken flat iron support of chapoy and supply and fixed new mild steel flat iron of size 25 x 3 mm thickness existing shape with GI washer fixed at clamp at bottom including painting with two coats of synthetic enamel paint over a coat of metal primer complete all as specified and as shown on drawing. (Drawing No. FD-220).
Taking out old damaged/broken wooden shoes from chapoy and supply and fixed new 2nd class hardwood (well seasoned) shoe of existing shape and size and fixed with screw at bottom of chapoy complete all as specified and as shown on drawing. (Drawing No. FD-220).
Removing of old PVC/ rubber shoe from various type of Tables/ chairs and supply and fixed new rubber/ PVC shoes as per existing size and shapes complete all as specified an das directed.
Material and labour for preparing & polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed by Engineer-in-Charge for the following wooden furniture:-
Bed Ply wood Top (Escept plywood) (Drawing No. FD- 213/ 246 M)
Chair Writing (Drawing No. FD- 20(M)/ 280)
Chair Dining (Drawing No. FD- 16(M)/228//279 )
Chair Easy (Drawing No. FD-17/229)
Chair wooden bottom (Drawing No. FD-56(M)/225)
Table 3' x 3' with out drawer (Drawing No. FD- 88(M)/291)
Table wooden with drawer 900 mm x 600 mm x 760mm (Drawing No. FD- 41(M) 283)
Table wooden without drawer 900 mm x 600 mm x 760mm (Drawing No. FD- 42(M)/55(M)/ 231/284)
Table 2' x 2' (Drawing No. FD-293)
Teapoy (Drawing No. FD- 34(M)/ 278)
Peg Table (Drawing No. FD- 277/384)
Table Centre (Drawing No. FD- 29(M)/235/ 274)
Table Writing (Drawing No. FD- 33(M)/ 249/ 275)
Table bed side (Drawing No. FD- 28(M)/ 276/ E6/MAP/15(R))
Table Dining 8/6 persons (Drawing No. FD- 30(M)/239 /273)
Table dressing ladies with mirror (Drawing No. FD- 32(M) 251)
Table dressing gents with mirror (Drawing No. FD- 31(M) 230)
Hat stand with Mirror (Drawing No. FD- 206/233)
Almirah mess utensil (Drawing No. FD- 39(M)
Book Case Large/ Small (Drawing No. FD-45(M)/ 237 )
Side Board (Drawing No. FD- 26/241/ 1112)
PRAVESH KUMAR
M/S MOHAN KUMAR BANSAL
M/S East India Traders
shekhar & company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .