Proposed New Modular Furniture and gas line for Life science and Chemistry Building at BKNMU Campus Junagadh

Name of Work:- Proposed New Modular Furniture and gas line for Life science and Chemistry Building at

BKNMU Campus Junagadh.

Sr. No. Quantity Item Description Unit Rate Amount

In figure in words

Supplying, laying, cutting, threading, jointing, fixing and

Rupees Four Thousand

testing of 0.5 inch dia GI pipe including all fittings, clamps,

1 396.00 Rmt 4,901.29 Nine Hundred One And

supports, consumables and labour complete as required at

Paise Twenty Nine Only

Supplying and fixing of approved make 3-piece brass ball Rupees Two Thousand

valve including installation, jointing, testing and all Five Hundred Seventy

incidental works complete. Five And Paise Fifty

Supplying and fixing of brass union suitable for GI pipeline Rupees One Hundred

3 16.00 including jointing material, labour and all accessories Nos. 111.10 Eleven And Paise Ten

Supplying and fixing of approved quality MS/GI pipe Rupees Ninety And Paise

clamps including fasteners, supports and labour complete. Ninety Only

Supplying and fixing of approved make gas pressure Rupees Three Hundred

regulator including testing and commissioning complete. Three Only

Supplying and fixing of approved quality rubber hose/pipe Rupees One Hundred

6 200.00 suitable for gas connection including clamps and Mtr. 161.60 Sixty One And Paise

accessories complete. Sixty Only

Supplying and fixing of brass nozzle valve including Rupees Two Hundred

7 320.00 installation, testing and all incidental charges complete. Nos. 292.90 Ninety Two And Paise

Supplying and fixing of rubber clamp including fasteners Rupees Six And Paise Six

and labour complete. Only

Supplying and fixing of brass nut nozzle suitable for gas Rupees One Hundred

9 16.00 line connection including jointing and testing complete. Nos. 111.10 Eleven And Paise Ten

Supplying, fixing and commissioning of laboratory gas Rupees Four Hundred

10 320.00 burner including all accessories, fittings and testing Nos. 484.80 Eighty Four And Paise

complete. Eighty Only

Transportation, loading, unloading, handling, minor

fabrication, installation assistance and all related job works Rupees Fifty Five

11 2.00 complete. Job 55,550.00 Thousand Five Hundred

Note : LPG Cylinder Arrangment arrange by University and Fifty Only

this cost not included in this Boq

Providing, supplying, installing, testing and commissioning

Constanant By pass Bench type Fume Hood

Size: Length 1800 x Depth 950 X 2300 mm Height

Technical specifications as per attached sheet.

Work Top Natural JetBlack Granite 18 +/- 1 mm thk -

Rupees One Lakh(s)

NITROGENE - 1 No.

Forty Two Thousand

Thirty One And Paise

COMPRESSED AIR -1 No.

Twenty Five Only

POTABLE WATER - 1 No.

P.P.Sink Size: 230x100 - 1 No.

Electrical Socket 6/16 amp (1SW+1SO) 3Module - 4 No.

15W LED ROUND LIGHT - 1 No.

2 Pole 32 Amp. MCB - 1 No. complete as per

specifications.

Providing, supplying, installing, testing and commissioning

Exhaust Fan (5.0-HP) BLOWER FOR 3 Nos. FUME

HOODS-CLUSTER-1,2,3,4

Fabrication and Supply of PP + FRP Blower

Type : Centrifugal Exhaust blower.

Pressure : 6” WC

Rupees One Lakh(s)

Seven Thousand Nine

13 4 MOC : 5mm PP + 5mm FRP No. 107,943.75

Hundred Forty Three And

Motor : 5.0 HP NFLP

Paise Seventy Five Only

Motor Make: Hindustan /Siemens/ABB/CG

Impeller : PP (Dynamically Balanced)

With MS Epoxy Painted Stand complete as per

specifications.

Providing, supplying, installing, testing and commissioning

constanant By pass Bench type Fume Hood

Size: Length 1500 x Depth 950 X 2300 mm Height

Technical specifications as per attached sheet.

Work Top Natural JetBlack Granite 18 +/- 1 mm thk -

Rupees One Lakh(s)

NITROGENE - 1 No.

Forty Two Thousand

Thirty One And Paise

COMPRESSED AIR - 1 No.

Twenty Five Only

POTABLE WATER - 1 No.

P.P.Sink Size: 230x100 - 1 No.

Electrical Socket 6/16 amp (1SW+1SO) 3Module - 4 No.

15W LED ROUND LIGHT - 1 No.

2 Pole 32 Amp. MCB - 1 No. complete as per

specifications.

Providing, supplying, installing, testing and commissioning

Exhaust Fan (2.0-HP)

BLOWER FOR EACH 1500MM FUMR HOOD

Fabrication and Supply of PP + FRP Blower

Type : Centrifugal Exhaust blower.

Pressure : 6” WC

Rupees Forty Eight

Thousand Two Hundred

15 11 MOC : 2mm PP + 3mm FRP No. 48,290.63

Ninety And Paise Sixty

Motor : 2.0 HP NFLP

Motor Make: Hindustan /Siemens/ABB/CG

Impeller : PP (Dynamically Balanced)

With MS Epoxy Painted Stand complete as per

specifications.

Rupees Three Thousand

Providing, supplying, installing, testing and commissioning

Nine Hundred Seventy

16 23 PP/FRP Damper Dia. 250mm complete as per No. 3,976.88

Six And Paise Eighty

specifications.

Providing, supplying, installing, testing and commissioning

Rupees Three Thousand

of exhaust ducting (Round Shape) inPP/FRP (3mm+2mm)

Nine Hundred Seventy

17 230 With necessary bend etc.(Final Billing fo Ducting will be Sqm 3,976.88

Six And Paise Eighty

done as per actual measurements) complete as per

specifications.

Rupees Ten Thousand

Providing and Fixing M750 mm wide Storage Cabinet with

Six Hundred Fifty Two

18 120 One Drawer and Two Shutter Combination with One No. 10,652.35

And Paise Thirty Five

Adjustable shelf below the palatform as directed by EIC.

Providing, supplying, installing, testing and commissioning Rupees Six Thousand

19 60 Single Sided 2 Tier Reagent Rack with Electrical Raceway No. 6,817.50 Eight Hundred Seventeen

L1800 complete as per specifications. And Paise Fifty Only

Providing, supplying, installing, testing and commissioning

Chemical Storage Cabinet (CSC)

Size: L 900 x D 450 x H 1830 mm

Chemical Storage Cabinet in GI Powder coated Rupees Thirty Thousand

20 2 construction,cabinet will have 2 nos. adjustable shelves No. 30,110.63 One Hundred Ten And

comparting 4 Paise Sixty Three Only

compartments, Ventilation arrangements doors with SS

Handles. Inside PP Lining on Walls & Shelves complete as

per specifications.

Rupees Nineteen

Providing, supplying, installing, testing and commissioning

Thousand Eight Hundred

21 1 Single Phase Inline Blower DIA. 250 mm complete as per No. 19,884.38

Eighty Four And Paise

specifications.

Thirty Eight Only

Providing, supplying, installing, testing and commissioning Rupees One Thousand

Heavy Duty Flexible Pipe Dia. 250 mm With Necessary Nine Hundred Eighty

Clamps Eight And Paise Forty

& Fittings complete as per specifications. Four Only

Providing, supplying, installing, testing and commissioning

Glassware Storage Cabinet (GSC) Size: L 900 x D 450 x H

1830 mm Rupees Twenty Thousand

Storage Cabinet in GI Powder coated construction, cabinet Seven Hundred Thirty

will Six And Paise Fifty Six

have 2 nos. adjustable shelves comparting 4 compartments, Only

double skin Glass doors with SS/Aluminium Handles.

complete as per specifications.

Providing, supplying, installing, testing and commissioning

SAR - Size:-L 900 x D 450 x H 1830 mm Rupees Eight Thousand

Slottted Angle Rack With Vertical support 1.6 mm thk G.I. Two Hundred Sixty Six

construction 1.0 mm thk 4nos. adjustable shelf Hardware in And Paise Twenty Two

304 Construction complete as per specifications.

Providing and supply and arranging Modular 80mm

aluminium partition low or Full height with 1200mm height

or more with whole frame structure of Aluminium extruded

alloy sections with all sections powder coated (50 micron)

Rupees Four Thousand

having overall partition thickness 80 mm (double skin)

25 116 Sqm 4,848.00 Eight Hundred Forty

flush on both sides, with no screwing or gluing etc. visible

with 5 mm thick ccompact sheet both side of partition with

5mm thick toughen glass as per approved list & selection

from Architect. The rate shall be concidered with all

necessary hardware & Labour.

Providing, supplying and fixing complete laboratory

furniture set for chemistry laboratory, comprising modular

base storage cabinets, drawer and shutter units, knee-space

modules, reagent racks, integrated electrical raceway, and Rupees Sixteen Thousand

26 90 18 ± 1 mm thick natural granite worktops, including all Sqm 16,665.00 Six Hundred Sixty Five

required fittings, hardware, supports and accessories, Only

suitable for laboratory use, complete as per approved

drawings, specifications and directions of Engineer-in-

Providing, supplying and fixing laboratory-grade false

ceiling system in chemistry laboratory areas, complete with

Rupees Five Thousand

suspension framework, ceiling panels, LED light fittings

One Hundred Seventy

27 138.94 with required wiring, achieving prescribed illumination Sqm 5,172.56

Two And Paise Fifty Six

(lux) levels suitable for laboratory environment, as per

approved drawings and directions of Engineer-in-Charge.

All civil works including but not limited to foundations,

masonry, plastering, structural alterations, grouting, patch

repairs, Provison for Blower Foundation (R.C.C.) or M.S.

structure, Making wall cut-outs, sleeves, openings or core Rupees Twenty Five

28 1 drilling required for passage of exhaust ducting, utilities or Job 25,250.00 Thousand Two Hundred

services and making good of surfaces required for Fifty Only

installation of laboratory furniture, fume hoods, ducting and

allied equipment shall be carried out by the Agency as

directed by EIC.

Providing, erecting of scaffolding, staging, platforms or

Rupees Twenty Five

any temporary support arrangements required for

29 1 Job 25,250.00 Thousand Two Hundred

installation of ducting, blowers, fume hoods or allied

services at any level as directed by EIC.

All electrical works other than equipment-side

terminations, including main power distribution, cabling, Rupees One Lakh(s) One

conduits, earthing and panel provisions required for Thousand Only

laboratory installations as directed by EIC

Providing power supply wire cables for exhaust

fans/blowers including 415 V, 50 Hz, 3 Phase AC supply

Rupees One Lakh(s) One

31 1 with necessary contactors, starters, protection devices and Job 101,000.00

circuit breakers from electrical panel up to blower motor as

directed by EIC.

Providing 230 V, 50 Hz, single phase AC electrical points

Rupees Fifty Thousand

32 1 near the junction box at top of the all fume hood, complete Job 50,500.00

Five Hundred Only

with necessary ELCB, protection devices and wiring,

Providing and extending all utility lines including water

supply, gas lines, vacuum, compressed air and drainage Rupees Fifty Thousand

lines up to the inlet points of the all fume hood as directed Five Hundred Only

Rupees Five Thousand

Providing and fixing approved laboratory three way tap as

34 253 Each 5,959.00 Nine Hundred Fifty Nine

per technical specification as per insctruction given by EIC.

Providing, supplying, installing, testing and commissioning

Constanant By pass Bench type Fume Hood

Size: Length 1800 x Depth 950 X 2300 mm Height

Technical specifications as per attached sheet.

Work Top Natural JetBlack Granite 18 +/- 1 mm thk -

Rupees One Lakh(s)

NITROGENE - 1 No.

Forty Two Thousand

Thirty One And Paise

COMPRESSED AIR -1 No.

Twenty Five Only

POTABLE WATER - 1 No.

P.P.Sink Size: 230x100 - 1 No.

Electrical Socket 6/16 amp (1SW+1SO) 3Module - 4 No.

15W LED ROUND LIGHT - 1 No.

2 Pole 32 Amp. MCB - 1 No. complete as per

specifications.

Providing, supplying, installing, testing and commissioning

Exhaust Fan (5.0-HP)

BLOWER FOR 3 Nos. FUME HOODS-CLUSTER-1,2,3,4

Fabrication and Supply of PP + FRP Blower

Type : Centrifugal Exhaust blower.

Pressure : 6” WC

Rupees One Lakh(s)

Seven Thousand Nine

36 1 MOC : 5mm PP + 5mm FRP No. 107,943.75

Hundred Forty Three And

Motor : 5.0 HP NFLP

Paise Seventy Five Only

Motor Make: Hindustan /Siemens/ABB/CG

Impeller : PP (Dynamically Balanced)

With MS Epoxy Painted Stand complete as per

specifications.

Providing, supplying, installing, testing and commissioning

Constanant By pass Bench type Fume Hood

Size: Length 1500 x Depth 950 X 2300 mm Height

Technical specifications as per attached sheet.

Work Top Natural JetBlack Granite 18 +/- 1 mm thk -

Rupees One Lakh(s)

NITROGENE - 1 No.

Forty Two Thousand

Thirty One And Paise

COMPRESSED AIR - 1 No.

Twenty Five Only

POTABLE WATER - 1 No.

P.P.Sink Size: 230x100 - 1 No.

Electrical Socket 6/16 amp (1SW+1SO) 3Module - 4 No.

15W LED ROUND LIGHT - 1 No.

2 Pole 32 Amp. MCB - 1 No. complete as per

specifications.

Providing, supplying, installing, testing and commissioning

Exhaust Fan (2.0-HP)

BLOWER FOR EACH 1500MM FUMR HOOD

Fabrication and Supply of PP + FRP Blower

Type : Centrifugal Exhaust blower.

Pressure : 6” WC

Rupees Forty Eight

Thousand Two Hundred

38 12 MOC : 2mm PP + 3mm FRP No. 48,290.63

Ninety And Paise Sixty

Motor : 2.0 HP NFLP

Motor Make: Hindustan /Siemens/ABB/CG

Impeller : PP (Dynamically Balanced)

With MS Epoxy Painted Stand complete as per

specifications.

Rupees Three Thousand

Providing, supplying, installing, testing and commissioning

Nine Hundred Seventy

39 16 PP/FRP Damper Dia. 250mm complete as per No. 3,976.88

Six And Paise Eighty

specifications.

Providing, supplying, installing, testing and commissioning

Rupees Three Thousand

of exhaust ducting (Round Shape) inPP/FRP (3mm+2mm)

Nine Hundred Seventy

40 200 With necessary bend etc.(Final Billing foDucting will be Sqm 3,976.88

Six And Paise Eighty

done as per actual measurements) complete as per

specifications.

Rupees Ten Thousand

providing and Fixing M750 mm wide Storage Cabinet with

Six Hundred Fifty Two

41 120 One Drawer and Two Shutter Combination with One No. 10,652.35

And Paise Thirty Five

Adjustable shelf below the palatform as directed by EIC.

Providing, supplying, installing, testing and commissioning Rupees Six Thousand

42 60 Single Sided 2 Tier Reagent Rack with Electrical Raceway No. 6,817.50 Eight Hundred Seventeen

L1800 complete as per specifications. And Paise Fifty Only

Providing, supplying, installing, testing and commissioning

laminar air flow (LAF) unit of size 4’ × 2’, constructed in Rupees Two Lakh(s)

SS 304, complete with filtration system, blower, lighting, Fifty Five Thousand Six

electrical fittings and all accessories, suitable for laboratory Hundred Fifty Six And

use, complete as per approved drawings, specifications and Paise Twenty Five Only

directions of Engineer-in-Charge.

Providing, supplying, installing, testing and commissioning

Chemical Storage Cabinet (CSC)

Size: L 900 x D 450 x H 1830 mm

Chemical Storage Cabinet in GI Powder coated Rupees Thirty Thousand

44 2 construction,cabinet will have 2 nos. adjustable shelves No. 30,110.63 One Hundred Ten And

comparting 4 Paise Sixty Three Only

compartments, Ventilation arrangements doors with SS

Handles. Inside PP Lining on Walls & Shelves complete as

per specifications.

Rupees Nineteen

Providing, supplying, installing, testing and commissioning

Thousand Eight Hundred

45 1 Single Phase Inline Blower DIA. 250 mm complete as per No. 19,884.38

Eighty Four And Paise

specifications.

Thirty Eight Only

Rupees One Thousand

Providing, supplying, installing, testing and commissioning

Nine Hundred Eighty

46 15 Heavy Duty Flexible Pipe Dia. 250 mm With Necessary Rmt 1,988.44

Eight And Paise Forty

Clamps & Fittings complete as per specifications.

Providing, supplying, installing, testing and commissioning

Glassware Storage Cabinet (GSC) Size: L 900 x D 450 x H Rupees Twenty Thousand

1830 mm Storage Cabinet in GI Powder coated Seven Hundred Thirty

construction, cabinet will have 2 nos. adjustable shelves Six And Paise Fifty Six

comparting 4 compartments, double skin Glass doors with Only

SS/Aluminium Handles complete as per specifications.

Providing, supplying, installing, testing and commissioning

Rupees Eight Thousand

SAR - Size:-L 900 x D 450 x H 1830 mm Slottted Angle

Two Hundred Sixty Six

48 17 Rack With Vertical support 1.6 mm thk G.I. No. 8,266.22

And Paise Twenty Two

construction 1.0 mm thk 4nos. adjustable shelf Hardware in

SS 304 Construction complete as per specifications.

Providing and supply and arranging Modular 80mm

aluminium partition low or Full height with 1200mm height

or more with whole frame structure of Aluminium extruded

alloy sections with all sections powder coated (50 micron)

Rupees Four Thousand

having overall partition thickness 80 mm (double skin)

49 116 Sqm 4,848.00 Eight Hundred Forty

flush on both sides, with no screwing or gluing etc. visible

with 5 mm thick ccompact sheet both side of partition with

5mm thick toughen glass as per approved list & selection

from Architect. The rate shall be concidered with all

necessary hardware & Labour.

Providing, supplying and fixing complete laboratory

furniture set for chemistry laboratory, comprising modular

base storage cabinets, drawer and shutter units, knee-space

modules, reagent racks, integrated electrical raceway, and Rupees Sixteen Thousand

50 90 18 ± 1 mm thick natural granite worktops, including all Sqm 16,665.00 Six Hundred Sixty Five

required fittings, hardware, supports and accessories, Only

suitable for laboratory use, complete as per approved

drawings, specifications and directions of Engineer-in-

Providing, supplying and fixing laboratory-grade false

ceiling system in chemistry laboratory areas, complete with Rupees Five Thousand

suspension framework, ceiling panels, LED light fittings One Hundred Seventy

with required wiring, achieving prescribed illumination Two And Paise Fifty Six

(lux) levels suitable for laboratory environment, as per Only

approved drawings and directions of Engineer-in-Charge.

All civil works including but not limited to foundations,

masonry, plastering, structural alterations, grouting, patch

repairs, Provison for Blower Foundation (R.C.C.) or M.S.

structure, Making wall cut-outs, sleeves, openings or core Rupees Twenty Five

52 1 drilling required for passage of exhaust ducting, utilities or Job 25,250.00 Thousand Two Hundred

services and making good of surfaces required for Fifty Only

installation of laboratory furniture, fume hoods, ducting and

allied equipment shall be carried out by the Agency as

directed by EIC.

Providing, erecting of scaffolding, staging, platforms or

Rupees Twenty Five

any temporary support arrangements required for

53 1 Job 25,250.00 Thousand Two Hundred

installation of ducting, blowers, fume hoods or allied

services at any level as directed by EIC.

All electrical works in equipment-side and terminations,

including main power distribution, cabling, conduits, Rupees One Lakh(s) One

earthing and panel provisions required for laboratory Thousand Only

installations as directed by EIC

Providing power supply wire cables for exhaust

fans/blowers including 415 V, 50 Hz, 3 Phase AC supply

Rupees One Lakh(s) One

55 1 with necessary contactors, starters, protection devices and Job 101,000.00

circuit breakers from electrical panel up to blower motor as

directed by EIC.

Providing 230 V, 50 Hz, single phase AC electrical points

Rupees Fifty Thousand

56 1 near the junction box at top of the all fume hood, complete Job 50,500.00

Five Hundred Only

with necessary ELCB, protection devices and wiring,

Providing and extending all utility lines including water

supply, gas lines, vacuum, compressed air and drainage Rupees Fifty Thousand

lines up to the inlet points of the all fume hood as directed Five Hundred Only

Rupees Five Thousand

Providing and fixing approved laboratory three way tap as

58 253 Each 5,959.00 Nine Hundred Fifty Nine

per technical specification as per insctruction given by EIC.

AMOUNT OF SCHEDULE-B