ARC Work of Erection and Maintenance of HT/LT/TC and laying, testing and commissioning of 11/22 KV underground XLPE cable under various scheme in Pramukhpark S/dn under jurisdiction of Pandesara Division.

3 Estimated Cost Rs.

Tender Fees (Non Refundable) with Rs. 1180 .00 (As per Clause mentioned

18% GST in Instruction to Bidders Clause No. 9)

Rs. 40,000.00 (As per Clause

mentioned in Instruction to Bidders

5 Earnest Money Deposit

Clause No. 10) Exemption in EMD will

Date & Place of Pre-Bid Meeting (If

Date :11.06.2026 on

Last Date of On Line (E-Tendering)

submission of Tender

Time : Up to 18.00 Hrs.

Date :11.06.2026 on

Last Date of submission of Tender

Fee & EMD (Through online Mode)

Time : Up to 18.00 Hrs.

Date : 12.06.2026 on

Date of opening of Preliminary Stage

(Tender Fee & EMD Online )

Time : Up to 10.30 Hrs.

Date : 12.06.2026 on

Tentative Date of opening of

Time : Up to 11.00 Hrs.

Date : 15.06.2026 on

Tentative Date of On line Opening of

Time : Up to 16.00 Hrs.

12 Validity of Tender Maximum period of 180 Days

13 Work Completion Period / Time Limit 24 Months (As per quantum of work)

DGVCL GSTIN No. is 24AABCD8912C1Z3.

Every Bidder has to inform their GSTIN No. at the time of payment of applicable fees.

a. Interested Bidders can view these tender documents online. The bidders who are interested in bidding in these tenders can

download tender documents from website https://tender.nprocure.com and www.DGVCL.com

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

Bidders, who wish to participate in this tender, will have to register on https://tender.nprocure.com Further, Bidders who wish to

participate in online tenders will have to procure Digital Certificate as per Information Technology Act-2000 using which they can

sign, their electronic bids. Bidders can procure the same from GNFC, Ahmedabad, who are licensed certifying authority by

Government of India and they will assist them in procuring the same as below mentioned address. Bidders who already have a valid

Digital Certificate need not procure a new Digital Certificate.

n) Code solutions-A PANDESARA IND DIVISION of GNFC Ltd.,

301, GNFC Info tower, S.G. Road, Bodakdev.

Ahmedabad – 380054 (Gujarat)

Email: [email protected]

b. However, no physical documents required if payment of tender Fee and EMD made through, RTGS & NEFT(upload

receipt online on https://tender.nprocure.com ).

c. Further bidders are requested to submit price bid (Schedule: B) on-line only and not to submit the price bid in physical form.

This is mandatory. If price bid is submitted in physical form, such offer shall be out rightly rejected.

d. It is mandatory for all the bidders to submit their tender documents with all relevant documents as desired in participation of

this bidthrough on-line (e-tendering) in schedule time. If tender documents with all relevant documents submitted in physical

form, in that case the online submitted documents shall be considered.

e. Bidders should be in touch with websites https://nprocure.com&www.dgvcl.com for intimation regarding

revision/corrigendum/Amendment in tender till due date of online submission and thereafter. No separate information

shall be sent in this regards and also not publish in newspaper. The directives and amendments issued

by DGVCL will have superseding effect to relevant section and specifications.

f. Any technical questions, information & clarification that may be required pertaining to this inquiry should be referred to

Executive Engineer PANDESARA DIVISION Office, “Dakshin Gujarat Vij Company Limited”

g. DGVCL reserves the right to reject any OR all tenders without assigning any reasons thereof.

h. Bank Details:

Bank Name: Bank of Baroda

Account Name: DGVCL IND DIV PANDESARA

Account Number:

IFSC Code: BARB0INDPAN

[Note-It is compulsory to mention Tender ID and Bidder name in reference for transaction confirmation

purpose of Tender Fee & EMD. Received online]

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

If payment make through RTGS/NEFT to the above account then share your UTR No. To the E-Mail ID:

[email protected] Also quote your name & amount paid.

You have to compulsory inform to detail regarding Online payment of tender fee and EMD at This office on E-Mail ID:([email protected])

Executive Engineer (O&M)

DGVCL, PANDESARA DIVISION

Download Tender Documents in (PDF Format) which consists of:

Instructions to Bidder

General Conditions of Contract

Schedule “B” indicating the quantities, rates & items, drawing if any.

Appendix and Annexure

Technical Specifications & GTP’s

To view the PDF file please use “Acrobat Reader” software which can be downloaded from “Adobe

CAPITAL WORK LABOUR RATES FOR FY 2024-25 (WITHOUT GST)

Sub:- Submission of ARC work of Erection of overhead 11/22KV HT line/LT line with Bare Conductor Areal

bunch conductor transformer Center & Service connection in all scheme & Work Supply, laying, testing and

commissioning of 11KV /22 KV UG cable (XLPE cable will be supplied by DGVCL) with cable termination and

straight through joints kits (to be supplied by contractor) for laying Underground Cable in all Schemes at

Pramukh Park Ind Sub Division under Pandesara Division.

Item Code Item Unit QTY FY 2024-25

HT TAPPING FROM THE EXISTING POLE INCLUDING

FIXING OF CROSS ARMS, CLAMPS ANTI-CLIMBING

DEVICES, DANGER BOARD, INSULATORS ETC.

1 9926000001 COMPLETE AND PAINTING OF FABRICATED No.

MATERIALS AND NUMBERING COMPLETE WITH COST

OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH,

FIXING OFCROSS ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, INSULATORS ETC. COMPLETE

AND PAINTING OF FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

ERECTION OF STEEL POLES OF 9 TO 11 METERS

INCLUDING EXCAVATION OF PIT AND REFILLING OF

EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS

ANTI-CLIMBING DEVICES, DANGER BOARD,

3 9926000003 INSULATORS ETC. COMPLETE AND PAINTING OF No.

STEEL POLE, FABRICATED MATERIALS USED ON THE

POLEAND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR

RAILWAY CROSSING ON BG/MG/NG LINE FOR

0.400/11/22KV OVERHEAD LINES I.E INCLUDING

EXCAVATION OF PIT & REFILLING OF EARTH, FIXING

CROSS ARMS, TOP FITTING CLAMPS,ANTI-CLIMBING

4 9926000004 DEVICES DANGER BOARD, INSULATORS ETC. No.

COMPLETE AND PAINTING OF STEEL POLES,

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF

METERS 200 KG PSC POLES INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTHING, FIXING OF

CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-

CLIMBING DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO

METERS.STEEL POLE INCLUDING EXCAVATION OF

PITS & REFILLING OFEARTH, FIXING OF CHANNELS,

SUPPORTING ANGLES, CLAMPS,ANTI-CLIMBING

DEVICES DANGER BOARDS, INSULATORS

6 9926000006 ETC.COMPLETE & PAINTING OF POLES,FABRICATED No.

MATERIALSUSED ON THE POLES AND NUMBERING

WITH COST OF PAINTSAS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH, HG FUSES OF 8 MTRS

KG PSC POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH,FIXING OF CHANNELS

SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING

7 9926000007 DEVICES, DANGER BOARDS, INSULATORS,DOFUSES No.

ETC. COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING

WITH COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDINGOF ERECTION OF

GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH,HG FUSES, 9 TO 11 METERS

STEEL POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, FIXING OFCHANNEL,

SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING

8 9926000008 DEVICES , DANGER BOARDS, INSULATORS, ETC. No.

COMPLETE AND PAINTING OF POLES FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.(WITH AB SWITCH)

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

ERECTION OF DOUBLE POLE STRUCTURES WITH

MOUNTING OFAB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 8 METER,200KG PSC POLE

METERS POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS ARMS

CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USEDON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH,HG FUSES

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES

INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTH CARTING OF TRANSFORMERS FROM STORE

TO SITE, FIXINGOF CHANNELS SUPPORTING ANGLES,

BRACING, CROSS ARMS,CLAMPS, ANTICLIMBING

DEVICES, DANGER BOARDS,CONDUCTOR AND CABLE

WIRING ETC. COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTIONS OF GUY SETS AND

ERECTION OF GUY SET INCLUDING EXCAVATION OF

PITS & REFILLING OF EARTH AS PER STANDARD

SPECIFICATION WITH STAY CLAMPS, STAY WIRE,

ANCHOR ROD, TURN BUCKLE, EYEBOLT, GUY

INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT

EXCLUDING CONCRETING.

CONCRETING OF POLES, GUYS, ETC. INCLUDING

COST OF CEMENT SAND METAL (1:2:4) AND WATER

ETC. AS PER STANDARD SPECIFICATION.(cement

Should be 53 grade) used for Concreting.

ERECTION OF COIL TYPE EARTHING INCLUDING COST

13 9926000013 OF COAL,SALT ETC. BUT WITHOUT COST OF GI WIRE No.

AS PER STANDARD SPECIFICATION(20kg solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE EARTHING

INCLUDINGCOST OF COAL SALT ETC. BUT WITHOUT

COST OF PIPE/GIPLATE GI WIRE AS PER STANDARD

SPECIFICATION.(20kg solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE COMPLETE

WITH CLAMPS, BRASS NIPPLE, BRASS HOLDER TECK

15 9926000015 WOOD BUSH,REFLECTORS FUSE, WIRING ETC. AS No.

PER STANDARD SPECIFICATION BUT EXCLUDING

COST OF MATERIALS.

STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA

CONDUCTOR for ALL TYPE OF CONDUCTOR (EXCEPT

16 9926000016 DOG CONDUCTOR) FOR 11/22KV & LT LINES

INCLUDING FIXING OF INSULATORS, BINDING

STRINGING OF GI WIRE 8 SWG INCLUDING BINDING

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

PROVIDING SINGLE PHASE SERVICE CONNECTION

WITH PVC 2.5/4MM2 TWIN CORE CABLE FROM

TERMINAL POLE TO METERING POINT INCLUDING

FIXING OF METER WITH METER EARTHING COMPLETE

WORK AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE

CONNECTION WITH PVC 4MM2/10MM2 FOUR CORE

CABLE FROM TERMINAL POLE TO METERING POINT

INCLUDING FIXING OF METER WITH METER EARTHING

COMPLETE WORK AS PER STANDARD SPECIFICATION

BUT EXCLUDING COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD

ROCK AREA FOR ERECTION OF POLE/ GUY ETC. AS

PER STANDARD SPECIFICATION OVER & ABOVE

20 9926000020 NORMAL COST COVERED AGAINST EXCAVATION OF No.

PIT UNDER NORMAL SOIL FOR ERECTION OF

POLE,GUY, DOUBLE POLE STRUCTURE EARTHING

WITH THE APPROVAL OF SUPDT.ENGINEER.

PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL

21 9926000021 CROSSING. MTR

PROVIDING GUARDING OF LT LINES ON ROAD/RAIL

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD

25 9926000025 CROSSING,HT LINE CROSSING AND TELEPHONE LINE No.

CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH , HG

FUSES,TRANSFORMERS, LIGHTENING ARRESTOR,

DISTRIBUTION BOX. ON 8 METERS 200 KGAND PSC

POLE INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROM STORES TO SITE, FIXING OF CHANNELS,

26 9926000026 SUPPORTING ANGLES,BRACINGS CROSS ARMS No.

CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE

POLE AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH

MOUNTING OFAB SWITCH , HG

FUSES,TRANSFORMERS, LIGHTENINGARRESTOR,

DISTRIBUTION BOX. ON 9 to 11 METERS RSJ POLE

INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS FROM STORES

TO SITE, FIXING OF CHANNELS, SUPPORTING

ANGLES,BRACINGS CROSS ARMS CLAMPS,

ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE

POLE AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND EARTHING.

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH,

FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, INSULATORS ETC. COMPLETE

28 9926000028 AND PAINTING OF FABRICATED MATERIALS USED ON No.

THE POLES AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF

METERS 270 KG PSC POLES INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTHING, FIXING OF

CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-

CLIMBING DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.(WITHOUT AB SWITCH)

STRINGING OF 100MM2 ACSR/100MM2 AAAC

30 9926000030 CONDUCTOR FOR 11/22KV & LT LINES INCLUDING

FIXING OFINSULATORS, BINDING JUMPERING ETC.

STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT

31 9926000031 LINES INCLUDING FIXING OF INSULATORS, BINDING

ERECTION OF DOUBLE POLE STRUCTURES WITH

MOUNTING OF AB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 10 METERS 270 KGAND PSC

POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS ARMS

CLAMPS, ANTI-CLIMBING DEVICES,DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING

OF FABRICATION AT STORE & STACKING OF POLE

SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH

CREDITING OF FABRICATION AT STORE & STACKING

OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR

PSC POLE) (WITH TRANSFORMER) WITH CREDITING

35 9926000035 OF FABRICATION & TRANSFORMER AT STORE & No.

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR

PSC POLE) (WITHOUT TRANSFORMER) WITH

36 9926000036 CREDITING OF FABRICATION AT STORE & STACKING No.

OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC. FOR

FIXING OF MESSENGER WIRE AND TO PROVIDE

SERVICE CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED

& DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ

MM+1*35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION /

TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE

38 9926000038 INSULATOR ETC. FOR FIXING OF MESSENGER WIRE KM

AND TO PROVIDE SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY ENGINEER

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN INSULATOR,PREPARING

SHACKLE POINT,JUMPERS ETC. AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN INSULATOR,PREPARING

SHACKLE POINT,JUMPERS ETC. AS REQUIRED AND

DIRECTED BY ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+

35 SQ MM INCLUDING FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION / TENSION CLAMP,

FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC.

41 9926000041 FOR FIXING OF MESSENGER WIRE AND TO PROVIDE KM

SERVICE CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED

& DIRECTED BY ENGINEER IN CHARGE.

DISMENTALING OF RSJ (9/11 METER) POLE AND

CREDITING THE OLD MATERIAL TO STORE

DISMENTALING OF TRANSFORMER CENTER ON

10MTR,270KG PSC POLE(WITHOUT TRANSFORMER)

43 9926000043 WITH CREDITING OF FABRICATION AT STORE AND No.

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON

10MTR,270KG PSC POLE(WITH TRANSFORMER) WITH

44 9926000044 CREDITING OF FABRICATION AT STORE AND No.

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM

45 9926000045 AND CREDITING FITTING OF ALL ACESSARIES AND KM

FABRICATION TO DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ

46 9926000046 MM AND CREDITING FITTING OF ALL ACESSARIES AND KM

FABRICATION TO DEPARTMENTAL STORE

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ

MM AND CREDITING FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ

MM+1*35 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ

MM+ 35 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT

DOG CONDUCTOR) FOR 11/22KV & LT LINES ONE COND

INCLUDING FIXING OF INSULATORS, BINDING PER KM

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT ONE COND

LINES INCLUDING , BINDING JUMPERING ETC. PER KM

LABOUR CHARGE FOR THE INSTALLATION OF NEW

DTR METER. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE REPLACEMENT OF DTR

53 9926000053 METER AND OLD METER SHOULD BE CREDITED TO No.

SDN STORE. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR

54 9926000054 METER CONNECTION. (CT COIL WILL BE PROVIDED BY PER CT

LABOUR CHARGE FOR REPLACEMENT OF CT COIL

FOR DTR METER CONNECTION AND OLD CT SHOULD

BE CREDITED TO SDN STORE. (CT COIL WILL BE

PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB FOR DTR

METER (MMB WILL BE PROVIDED BY DGVCL)

57 9926000057 LABOUR CHARGE FOR REPLACEMENT OF DTR METER No.

BOX. (METER WILL BE PROVIDED BY DGVCL)

PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE

58 9926000058 COPPER CABLE 3.5 METER (CABLE TO BE PROVIDED No.

LABOUR CHARGE FOR PROVIDING/RECONNECTION

59 9926000059 OF TERMINAL CONNECTION WITH PROPER SIZE OF

LUGS. (LUGS COST IS BORNE BY AGENCY)

LABOUR CHARGE FOR THE SPOT READING OF DTR

METER WITH DETAIL SURVEY OF DEFECT IF ANY. A

DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY

IN PRO-FORMA REPORT SHOULD BE SUBMITTED TO

SDN OFFICE.(* ONLY IF ALL PARAMETER OF VOLTAGE,

CURRENT & LOAD AS SHOWN IN PER-FORMA IS

FILLED) AS PER THE INSTRUCTION OF ENGINEER IN-

LABOUR CHARGE FOR THE SPOT READING OF DTR

METER WITH DETAIL SURVEY OF DEFECT IF ANY. A

DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY

61 9926000061 IN PRO-FORMA REPORT SHOULD BE SUBMITTED TO PER DTR

SDN OFFICE. (DULY FILL PER-FORMA IN FAULT

CONDITION IN WHICH READING PARAMETER IS NOT

SHOWN IN METER)

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

INSTALLATION OF DTR METER INCLUDING METER

BOX, PROVIDING & FIXING OF 1.5SQ MM SINGLE

STRAND 10 CORE ARMOURED COPPER CABLE

(3.5METER), TERMINATION IN METER & COIL ETC.

(METER, METER BOX, C.T./P.T. COIL WILL BE

PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING METER

BOX, TERMINATION IN METER & COIL ETC. (WITHOUT

10CORE COPPER CABLE) (METER, METER BOX,

C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

Binding of messanger Conductorat with a distance not more

64 9926000064 than 0.75 mtr with 6 turns minimum on XLPE Cable with No

single strand binding wire (including cost of binding wire)

Supply and Installation of 11/22 kV Distribution Transformers

HT Terminal protector (UV Resistance) with using

95/120/150 sq.mm long barrel aluminum lug. (1Set = 3 Nos

Supply & Installation of HT EPR Tap on 11/22 kV Distribution

Transformer with replacement of bare conductor by HT ABC

66 9926000087 conductor (DO bottom side to transformer) after removal of PER SET

semi conductor by HT ABC (6 inch both side). HT ABC to be

supplied by DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic)

67 9926000088 Type, Earth Electrodes for HT Feeder Pole Having 2000 mm NO

Electrode Length as per the Tender Specifications and

Drawing. (All Materials Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic)

68 9926000089 Type, Earth Electrodes for HT Feeder Pole Having 3000 mm NO

Electrode Length as per the Tender Specifications And

Drawing. (All Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having hot dip-

galvanized-zinc coating of 80-100 microns without any joints

or welding. Both the end of the GI strip should be connected

with GI nut bolts and required fabrication work for giving

separate earthing connections to

(1) Neutral of the transformer

(2) MS structures of the transformer center (Approximately

25 meter GI strip per transformer centre

- as per requirement and instruction of Engineer in- charge)

(All Materials will be supplied by Agency)

Supply and Installation of uPVC standard make Pipe of 1.25"

diameter for covering GI strip with UV protected Cable Ties

of 550 X 7.6 mm size to bind with pole face(Approximately

25 meter uPVC pipe for GI strip covering per transformer

centre -as per requirement and instruction of Engineer in-

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to

Drop out Fuse and Drop out fuse to Transformer H.T.

including Busbar (12 mm sleev) as per technical

specification. (All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to

Drop out Fuse and Drop out fuse to Transformer H.T.without

Busbar(12 mm sleev) as per technical specification. (All

Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to

Drop out Fuse and Drop out fuse to Transformer H.T.

including Busbar(15 mm sleeve) as per technical

specification. (All Materials will be supplied by Agency)

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to

Drop out Fuse and Drop out fuse to Transformer H.T.

without Busbar(15 mm sleeve) as pertechnical specification.

(All Materials will be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-flammable)

material with Weather resistant, Non-conductive bird guard

OD=300 MM, ID=33 MM, Width =1.25 MM, one side cut

from ID to OD. (All Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e. Re-

useable boot (LT Side 1.1 kV) including LT (1.1 kV)

insulating taps. All live part at LT side shall be covered with

fixing of LT insulating taps.

77 Nylon Net around Transformer Center

78 9926000097 Nylon Net (12 * 15 ft) Per Net

79 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated material for

fitting nylon net shall be provided by DGVCL)

81 9924000001 Cutting of Tree branches surounding HT/LT line Per Tree

Replacement of old jumpers & providing new double jumpers

with 8" binding [D Type] & capsuling with PVC pipe etc

83 9924000005 Support pole for Stay PSC/STP/RSJ No.

84 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

Pin binding of conductor 11/22kv Pin insulator per pole in

costle area with cleaning .

86 9924000008 Pin binding of conductor LT shakel insulator No.

87 9924000009 Replacement of one/both disc.insulator at strain pole No.

88 9924000010 Replacement of LT shackle insulator at cut point No.

89 9924000011 Refixing of V cross Arm No.

Replacement of V cross Arm (With Transportation &

91 9924000013 Refixing of Top fitting in proper position No.

92 9924000014 Replacement of Top fitting No.

93 9924000015 Replacement of LT cross Arm No.

Providing DO fuse on DP with carting & jumpuring(ONE DO

Numburing of pole with paint by preparing back ground of

95 9924000017 one colour and have lettering(height 3" * width 0.5") using No.

96 9924000018 Fixing of MMB(1PH.) at consumer end No.

97 9924000019 Fixing of MMB(3PH.) at consumer end No.

98 9924000020 Replacement of (1ph.) meter for Urban area No.

99 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban) (with letter size

height 40mm* width 8mm)

painting consumer no. on MMB (Rural) (with letter size

height 40mm* width 8mm)

102 9924000024 Replacement of deteriorated Single phase Service line No.

Fixing of new dist. Box with complete wiring including

clamps,nut bolts etc.

Reparing of guarding involving reshaping of bearer wire

cross lacing binding etc.

Painting of steel fabricated material of RSJ DO DP structure

Painting of steel fabricated material of RSJ pole mounted

transformer double pole structure with paint

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

Painting of steel fabricated material of RSJ single pole with

painting of steel fabricated material of PSC Single pole (HT

line) with paint

painting of steel fabricated material of PSC DO DP double

pole with paint

painting of steel fabricated material of PSC double pole at

pole mounted transformer with paint

111 9924000033 Providing line seperater single phase No.

112 9924000034 Providing line seperater three phase No.

Replacement / Providing of stay insulator along with

adjustment of tension in stay wire

Replacement of deteriorated /providing LT dist. Box with

new up to 100KVA capacity & crediting it to store.

Replacement of deteriorated /providing LT dist. Box with

new above 100KVA capacity & crediting it to store.

116 9924000038 Adjustment of tension in stay wire No.

117 9924000039 Refitting of LA No.

Converting pin point to Shackle point including dismentaling

118 9924000040 location

& restringing etc.

replacement of 11KV Pin insulator with providing new double

replacement of 22KV Pin insulator by new 11kv pin insulator

with spares & providing new double pin binding

Providing 11kv double disc insulators with binding &

Replacement of existing 11kv conductor (all size) with new

double pin binding

123 9924000046 Plumbing of PSC Pole with straightening at pin point No.

124 9924000047 Plumbing of PSC Pole with straightening at tension point No.

Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling

of stone Murrum etc.

Providing new 11kv AB /GO switch with fabrication and

insulated colour code jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch with providing new

insulated jumper, binding, lugs etc

Providing cage type loop guard in verticle LT line with using

128 9924000052 per pole

PVC reel insulators etc

Labour charges for replacement /providing of MMB & service

with all accessories for three phase connection

Labour charges for replacement /providing of MMB & service

with all accessories for single phase connection

Dismentalling of existing Dist.X'mer center(RSJ /STP POLE)

131 9924000055 25/63/100/200 KVA with all fabrication & creditig the old No.

material to store

132 9924000056 Disconnection from LT pole 1 phase No.

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

134 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line from pole & crediting

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

Dismentaling & removing of service line from pole & crediting

138 9924000062 Reconnection of service line complete with PVC cable (1 Ph) No.

139 9924000063 Reconnection of service line complete with PVC cable (3 Ph) No.

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr

in length) with salt and coal 10kg each, including pvc rigid

140 9924000064 pipe 20mm dia( 1.5mtr length) to pass exposed part of G.I. No.

wire at consumer end with all materials, earth resistance

should be less than 2 ohms

Providing and fixing of signle core 1.5 sq mm single strand

copper insulated cable with cable nail clip for spiral type

earthing at consumer end. The end of G.I. no 8 is to be

connected by connector with copper cable of which other

141 9924000070 per meter

end shall be connected to the earth terminal of meter box.

This item shall be used in location where there is more

distance between earth terminal and earthing terminal of

meter. (All materials supplied by contractor)

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM

including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of

142 9924000065 dismantling charge of existing bare conductor and crediting KM

in to store & dismentaling of service line from LT bare

conductor and to provide service connection on Aerial Bunch

Cable by insulated pierceing connectors through service

connection box complete as required & directed by Engineer

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ

MM including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of

143 9924000066 dismantling charge of existing bare conductor and crediting KM

in to store & dismentaling of service line from LT bare

conductor and to provide service connection on Aerial Bunch

Cable by insulated pierceing connectors through service

connection box complete as required & directed by Engineer

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM

including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, binding to

144 9924000067 pin insulator,preparing shackle point,jumpers etc. and KM

inclusive of dismantling charge of existing bare conductor

and crediting in to store complete as required & directed by

Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM

including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, binding to

145 9924000068 pin insulator,preparing shackle point,jumpers etc. and KM

inclusive of dismantling charge of existing bare conductor

and crediting in to store complete as required & directed by

Engineer in Charge

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ

MM including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of

dismantling charge of existing bare conductor and crediting

in to store & dismentaling of service line from LT bare

conductor and to provide service connection on Aerial Bunch

Cable by insulated pierceing connectors through service

connection box complete as required & directed by Engineer

Labour charge for excavation of cable trench of 400mm

width x 1200mm depth, in any type of soil for laying of cable

147 9925000001 of size up to 240 mm2 (For additional cable 200 mm Meter

additional width shall be considered i.e. half trench length is

to be considered)

Labour charge for excavation of cable trench of 600mm

width x 1200mm depth, in any type of soil for laying of cable

148 9925000002 of size up to 240 mm2 (For additional cable 200 mm Meter

additional width shall be considered i.e. half trench length is

to be considered)

Labour charge for excavation of cable trench of 400mm

width x 1500mm depth, in any type of soil for laying of cable

149 9925000003 of size up to 240 mm2 (For additional cable 200 mm Meter

additional width shall be considered i.e. half trench length is

to be considered)

Labour charge for laying of 11kV / 22 kV XLPE Cable of size

up to 240 mm2 & preparation of sand layer 100mm thick, in

the cable trench & covering the cable with 150 mm dia

(Inner), thickness 25 mm, 1.0 meter long RCC half round

muffs and providing and fixing of 4inch width yellow colour

150 9925000004 polyethylene tape with printing "CAUTION ELECTRIC Meter

CABLE BELOW" at 0.75 m depth from ground surface after

laying cable in trench. This will provide indication that

electric cable is passing underground so as to protect cable

from mechnical injuries, refilling the same, as per Instruction

of Engineer in Charge (EIC).

Labour charge for horizontal drilling using Auger machine

without damage to surface road at max 2.0 mtrs depth &

putting of 6.11 kg/cm2 , class-4,Green color, 110mm O.D.

8.5mm thickness H.D.P.E. pipe confirms to IS 4984-

1987(3rd revision) and BIS certification and laying of

11KV/22KV XLPE cable of size up to 240 mm2 in HDPE

151 9925000005 pipe, as per Site Condition (excluding cost of pipe). The Meter

detail map obtained from HDD machine and excell

sheet(hard and soft copy) indicating the respective depth

and distance from adjacent landmark for each segment for

HDD is must required to be submitted. HDD to be carried out

at depth 1.5 mtrs to 2.0 mtrs as per site conditions and as

per instruction of EIC.

Labour charge for horizontal drilling manually without

damage to surface road at max 2.0 mtrs depth & putting of

6.11 kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm

thickness H.D.P.E. pipe confirms to IS 4984-1987(3rd

revision) and BIS certification and laying of 11KV/22KV

XLPE cable of size up to 240 mm2 size, as per Site

Condition (excluding cost of pipe). The detail map and excell

sheet(hard and soft copy) indicating the respective depth

and distance from adjacent landmark for each segment of

cable to be submitted. Drilling to be carried out at depth

Minimum 1.2 mtrs to 2.0 mtrs as per site conditions as per

instruction of EIC.

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D.

, 8.5 mm thickness H.D.P.E. pipe confirms to IS 4984 and

BIS certification for laying of underground 11KV / 22KV

XLPE cable up to 240 mm2 size.

Labour work for RCC concreting on disputed location and

repairing of damage portion of road crossing for the work

carried out for roads crossing as well as concreting & muffing

of ploes including all materials (1:2:4)

Providing & fixing concrete stone route marker of 300 mm

width x 150 mm thick x 650 mm height embedded in earth at

least 300 mm below & 350 mm above ground level

respectively at distance approx 50 meters along the length of

cable. The RCC concreting (1:2:4)(all necessary maeterials

will be in bidder's scope) of route marker is to be carried out

300 mm width x 150 mm thick x 300 mm below ground level

as per instruction of EIC. The route marker should be with

name of company with approved yellow colour-DGVCL. The

distance from marker to cable and cable depth with feeder

name etc., marked with arrow sign is to be painted on it.The

route marker is to be fixed at location near to any fixed

permanent location (not necessary to fix exact on top of

cable) as per instruction of EIC.

Erection of D.P. (double pole) structure using 9 / 11 Mtr.

RSJ pole with cable connection arrangement along with

156 9925000010 fitting of necessary fabrication for 11KV cable including No.

excavation of pit & refilling of earth as per instruction of EIC.

(Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ pole

with cable connection arrangement along with fitting

157 9925000011 ofnecessary fabrication for 11KV/22 KV cable including No.

excavation of pit & refilling of earth as per instruction of EIC.

(Exclusive of concreting & muffing of poles)

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC

pole with cable connection arrangement along with fitting of

158 9925000012 necessary fabrication for 11KV cable including excavation of No.

pit & refilling of earth as per instruction of EIC. (Exclusive of

concreting & muffing of poles)

Erection of Single pole structure using 8.0 Mtr PSC pole with

cable connection arrangement along with fitting ofnecessary

159 9925000013 fabrication for 11KV/22 KV cable including excavation of pit No.

& refilling of earth as per instruction of EIC. (Exclusive of

concreting & muffing of poles)

Labour charge for erecting of 11kV / 22 kV XLPE cable of

size up to 240 mm2 on DP Structure with fixing of 02 Nos

polymer cleats on top and middle part.Polymer cleats, nut

bolts etc. fixing material to be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class-4,Green color,

110mm O.D. , 8.5mm thickness H.D.P.E. pipe confirms to IS

4984 and BIS certification on the erected DP structure for

the mechanical protection of cable by inserting the cable

161 9925000015 inside HDPE pipe. The HDPE pipe shall be erected in such a Per Job

way that 300mm shall be below the ground level and the rest

2700 mm shall be supported on the DP Structure with 01 No

Polymer cleat.All materials including polymer cleat and Nut

bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia

class-B GI pipe with pit to be filled with salt & coke and

construction of chamber as per DGVCL Drg. No. dg /100 for

DP and cable. The earthing pit should be joined with cable

by G.I. strip of size 1” width & 2 mm thick. All material GI

pipe, Coke, Salt etc will be supplied by bidder.

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

Supply & fixing of heat shrink type end terminations

163 9925000017 (outdoor) for upto 11kV 3C x 185 mm2 size XLPE cable No.

as per DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations

164 9925000018 (outdoor) for upto 22 kV 3C x 185 mm2 size XLPE cable as No.

per DGVCL technical specification)

Supply & fixing of heat shrink type end terminations (indoor)

165 9925000019 for upto 11kV 3C x 185 mm2 size XLPE cable as per No.

DGVCL technical specification)

Supply & fixing of heat & shrinkable end terminations

166 9925000020 (indoor) for upto 22 kV 3C x 185 mm2 size XLPE cable as No.

per DGVCL technical specification

Supply & fixing of heat shrinkable straight through joint for

167 9925000021 upto 11kV 3C x 185 mm2 size XLPE cableas per DGVCL No.

technical specification.

Supply & fixing of heat shrinkable straight through joint type

168 9925000022 for upto 22kV 3C x 185 mm2 size XLPE cable as per No.

DGVCL technical specification

Labour charge for excavation of 2100mm long x 1200mm

wide x 1200 mm deep joint pits for installation of 11kV / 22kV

Straight through joints as per instruction of engineer-in-

charge & covering the cable with 150 mm dia (Outer),

thickness 25 mm, 1.0 meter long RCC half round muffs &

refilling same as per instruction of EIC .

Providing and fixing of insulating bus bar, made from

11KV/22KV XLPE cable after removal of semi conducting

layer and applying of PVC heat shrinkable anti-tracking core

insulating tubing (1.1KV), on both end terminal using

Aluminium long barrel heavy duty up to 240 sq mm lugs,

170 9925000024 Aluminium bus connector. Taping with PG- clamp for bus No.

conductor as per drawing and as per instruction of EIC. The

Alluminium lugs and PG clamp shall be covered with

11KV/22KV HT insulating tapes.(11KV/22KV XLPE cable

will be in scope of DGVCL while all other materials will be in

bidder's scope)

Testing of cable at various points and commissioning

171 9925000025 the feeder as per instruction of engineer-in-charge.Test No.

result shall be submitted by contractor with bill.

Preparation and submission of 6 (six) copies, of complete

layout drawings with GIS mapping as per actual cable

routing showing road crossing, HDPE pipe sleeving, jointing

locations, markers etc.

Providing and fixing of Sign Board at junction point Made out

of 2 mm aluminium sheet size 750x300 mm (2.5 x 1ft)

rectangle, as per design, pre treated with phosphate process

and acid etching coated with one coat of epoxy primer and

two coats of best quality paints, refloctrorised with Hi-

Intensity retro – reflective sheeting as per the latest and

173 9925000027 frame fabricated from suitable size iron angle. The Sign No.

Board is to be fixed on the base prepared from channel and

bracing angles which is grouted by means of cement

concreting of 1:2:4 for size of 300 mm dia x 800 mm height

(500 mm to be grouted in ground). The details to be

displayed on sign board will be given by In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

Providing and fixing of Sign Board (Danger Board) on

Distribution Transformer Centers

Made out of 2mm aluminium sheet size 300x300mm (1x1ft)

as per design, pre treated with phosphate process and acid

etching coated with one coat of epoxy primer and two coats

174 9925000028 of best quality paints, refloctrorised with Hi-Intensity retro- No.

reflective sheeting as per the latest and frame fabricated

from suitable size iron angle. The Sign Board (Danger Board

is to be fixed at the location as per instruction of In-charge

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x

mm (W) from 3 mm aluminium sheet along with 1.0 mm dia

aluminium binding wire for fixing of aluminium tag near end

175 9925000029 termination joint at DP structure for identifyng the cable. The No.

details of feeder i.e. 11 / 22 KV with feeder name shound be

punched on the tag by letter punch of size 16 mm as per

instruction of In-charge Engineer.

Supply & fixing of heat shrink type end terminations

176 9925000030 (outdoor) for 11kV 3C x 240 mm2 size XLPE cable as per No.

DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations

177 9925000031 (outdoor) for 22 kV 3C x 240 mm2 size XLPE cable as per No.

DGVCL technical specification)

Supply & fixing of heat shrink type end terminations (indoor)

178 9925000032 for 11kV 3C x 240 mm2 size XLPE cable as per DGVCL No.

technical specification)

Supply & fixing of heat & shrinkable end terminations

179 9925000033 (indoor) for 22 kV 3C x 240 mm2 size XLPE cable as per No.

DGVCL technical specification

Supply & fixing of heat shrinkable straight through joint for

180 9925000034 11kV 3C x 240 mm2 size XLPE cableas per DGVCL No.

technical specification.

Supply & fixing of heat shrinkable straight through joint type

181 9925000035 for 22kV 3C x 240 mm2 size XLPE cable as per DGVCL No.

technical specification

Installation, Testing and commissioning of 11 KV,630 A

SCADA Compatible, RRL type- 3 Way RMU including Two

numbers of earthings as per Drawing (material is in bidder's

scope) and as per DGVCL Technical specification.

Installation, Testing and commissioning of 11 KV,630 A

SCADA Compatible, RRLL type- 4 Way RMU including Two

numbers of earthings as per Drawing (material is in bidder's

scope) and as per DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A

SCADA Compatible, RRL type-3 Way, RMU including Two

numbers of earthings as per Drawing (material is in bidder's

scope) and as per DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A

SCADA Compatible, RRLL type-4 Way, RMU including Two

numbers of earthings as per Drawing (material is in bidder's

scope) and as per DGVCL Technical specification.

Construction of plinth for 11KV, RRL type- 3 Way (i.e

Two numbers of Isolator & One number of Breaker) Ring

186 9925000042 Main Unit as per DGVCL's technical specification No.

mentioned in drawing no: Drg. 11kv-01. All required

material will be supplied by contractor.

Construction of plinth for 11KV, RRLL type- 4 Way (i.e

Two numbers of Isolator & Two number of Breaker)Ring

187 9925000043 Main Unit as per DGVCL's technical specification No.

mentioned in drawing no:Drg. 11kv-02.All required

material will be supplied by contractor.

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

Construction of plinth for 22KV, RRL type- 3 Way (i.e

Two numbers of Isolator & One number of Breaker) Ring

188 9925000044 Main Unit as per DGVCL's technical specification No.

mentioned in drawing no: Drg. 22kv-01. All required

material will be supplied by contractor.

Construction of plinth for 22KV, RRLL type- 4 Way (i.e

Two numbers of Isolator & Two number of Breaker)Ring

189 9925000045 Main Unit as per DGVCL's technical specification No.

mentioned in drawing no:Drg. 22kv-02.All required

material will be supplied by contractor.

Modifications e.g.Providing and fixing of Terminal protectors

i.e. Re-use able boot (HT Side 11/22KV, LT Side 1.1KV)

including 11/22 KV insulating taps and L.T.(1.1 KV)

insulating taps ,Busbar, Tapping from Bus Bar (11/22 KV

XLPE cable) through P.G. Clamp for H.T. Jumper to D.O.

Fuse to bushings of Transformer Center, providing & Fixing

of jumper and providing & fixing of Heat Shrinkable Anti

Tracking Core Insulating Tubing (Insulation Level 11/22 KV)

in H.T. jumper , Clamping arrangement of cable support

frame on both side of existing Over Head type Distribution

Transformer to utilize in Under Ground cable network as per

drawing & as per instruction of Engineer incharge. All live

parts i.e. PG-Clamp, connections of D.O.fuses, HT bushings

etc . shall be covered with fixinng of 11/22 KV HT insulating

tapes. ( 11/22 KV XLPE cable will be in scope of DGVCL

while all other materials will be in bidder's scope ) .

Laying of any size of 11/ 22 KV XLPE /PILC Cable in Per Cable Per

redaymade trench or in open space Mtr

192 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole KM

Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter

long RCC half round pipe

Rs. Fifty Lakh Only TOTAL

Note: 1.DGVCL will provide key material like M.S.

materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated

materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL

approved drawing and by welding rods confirming to the

relevent ISI specification and as directed by Engineer in

3.Necessary electricity connection for fabrication items shall

be provided by DGVCL on payment of required charge for

connection & electricity bill of the same shall be paid by the

4.All the rates are inclusive of PF & Exclusive of GST

applicable time to time.

5.All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the

paints on to the RSJ poles & steel fabricated materials of

RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to

be properly painted for the RSJ poles & steel fabricated

materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple

mangoes or equivalent quality silver paint) is to be properly

painted on to the RSJ poles & steel fabricated materials of

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0204/04/2026 Approved Date: 22-05-2026

EXECUTIVE ENGINEER (O&M)

DGVCL, PANDESARA DIVISION,

File No: DGVCLSDPND/OTH/e-file/4516/2026/0952/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI