Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 CrAccepted-AOC VILLAGE THARAS P O HURLA TEHSIL BHUNTAR DISTT KULLU H P 175125 | KULLU | HIMACHAL PRADESH | 175125 | ₹4.7 Cr | L1 | Accepted-AOC Eligible |
| 2 | L2₹5.1 Cr+₹42.9 L (9.12%)Rejected-Finance | ₹5.1 Cr+₹42.9 L (9.12%) | L2 | Rejected-Finance In Eligible |
| 3 | L3₹5.7 Cr+₹1.0 Cr (22.1%)Rejected-Finance VILL PANOH PO CHOURI TEHSIL SUJANPUR DISTT HAMIRPUR H P | HAMIRPUR | HIMACHAL PRADESH | 174304 | ₹5.7 Cr+₹1.0 Cr (22.1%) | L3 | Rejected-Finance In Eligible |
| 4 | L4₹6.0 Cr+₹1.3 Cr (27.4%)Rejected-Finance NOT AVAILABLE | ₹6.0 Cr+₹1.3 Cr (27.4%) | L4 | Rejected-Finance In Eligible |
Tender Value
₹7.1 Cr
EMD Value
₹7.9 L
Closing Date
1 Feb 2025, 5:00 pmClosed
Executive Engineer
Jal Shakti Division Kullu
SH Construction of RCC cantilever retaining wall toe wall and apron river diversion removal of obstruction at RD 50000 to 50300 300
2025_HPIPH_98526_2
11093-11142 Bhunter Bridge
Open Tender
Civil Works
Item Rate
90 days
Near Bhunter Bridge
Please refer Tender documents.
15 documents required · 15 mandatory
₹10,000
Executive Engineer
₹7.9 L
21 Mar 2025
22 Jan 2025
3 Feb 2025
22 Jan 2025
1 Feb 2025
22 Jan 2025
Amount
Earthwork in cutting of all kinds of soil using mechanical means (Hydraulic Excavator and tippers) / manual means disposal upto all lead and lifts complete in all respect as per direction and to the entire satisfaction of Engineer-in-charge.
Earthwork in excavation by mechanical means (Hydraulic Excavator and Tippers)/manual means i/c dressing of sides , ramming of bottoms and bailing out water from river , retaining the required soil into trenches in 15 cm layers duly ramming & stacking the excavated soil for use in back filling and disposal of surplus excavated earth with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.
Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of formwork in foundation and plinth with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.
Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of formwork in foundation and plinth with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.
Providing form work with mild steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering and removal of the same for insitu- reinforced concrete work and plain concrete work in with in all lead and lift. The plates shall be sand papered and properly graced with oil before its placement for formwork complete in all respect as per direction and to the entire satisfaction of Engineer-in-charge.:-
In foundation , footings bases of columns etc and mass concrete.
In Vertical surfaces such as walls(any thickness )partition and the like including attached pillasters, buttresses plinth and string courses and like including all leads and lifts etc. complete in all respects.
Providing and laying cement concrete 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size )i/c bailing out water , pumping of water or diversion of river flow and curing complete excluding cost of formwork and reinforcement for reinforced concrete work complete in all respect as per direction and to the entire satisfaction of the Engineer-in-Charge.
i) In foundations ,footings bases of columns and the like and mass concrete work complete in all respects
Providing and laying tor steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete i/c cost of binding wire complete in all respect within all leads and lifts as per the direction and to the entire satisfaction of the Engineer-in-charge.
Providing, laying, jointing and testing of ISI marked high pressure PVC pipe of 100mm nominal dia with pressure rating PN-4.0 working pressure for weep holes including cutting and fixing with approved adhesive complete up to or above plinth level complete in all respect within all leads and lifts as per the direction and to the entire satisfaction of the Engineer-in-charge.
Providing Stone soiling / boulder filling properly hand packed behind retaining walls / in front of stem wall and also under floors etc complete up to or above plinth level complete in all respect within all leads and lifts as per the direction and to the entire satisfaction of the Engineer-in-charge.
Filling with already excavated earth at site of work in 15cm layers in foundation and plinth including ramming , watering and consolidating complete in all respect within all leads and lifts as per the direction and to the entire satisfaction of the Engineer-in-charge.
Providing and laying of drainage composite for use behind walls, between two different fills along side drains of road below concrete lining of canal etc. geocomposite for planar drainage, realized by thermobonding adraining core in extruded monofilaments with two filtering nonwoven geotextiles that may also be working as separation or protecting layers. The drainage three dimensional core will have a"W" configuration as longitudianal parallel channels. Minimum thickness to be 7.2 mm, with two filtering UV stablised polypropylene non woven geotextile of minimum thickness 0.75 mm characteristic opening size (090) of 110 micron and tensile strenght of 8.0 kn/m that will be working as separation or protecting layer, geocomposite having in plane flow capacity of 2.1 lps at hydraulic gradient of 1.0 & 2.0 kpa pressure and tensile strenght of 18 kn/m with mass per unit area of 740 gsm supplied in the form of roll for easy transportation to site of work as per specification all complete as per directions of Engineer-in-Charge.
Providing and laying 15 cm thick sand layer on top & bottom of geotextile filter including of material within all leads and lifts.
Wire crates made of GI wire hand woven (Double Twisted ) filled with boulders with square cut faces against the wire (boulder filling to be measured andpaid for separately) GI wire 5mm thick corresponding to SWG-6 (15cmX15cm) mesh complete in all respect within all leads and lifts as per the direction and to the entire satisfaction of the Engineer-in-charge.
Providing and laying stone filling in layers in apron of guide banks embankment and protection work in wirecrates made of GI wire filled with boulders with square cut faces against the wire .The size of boulders / stone used in apron shall be larger than the openings of mesh i.e more than 15 cm having proportionate weight not less than 18 kg (GI wire shall be measured and paid seperately complete in all respect within all leads and lifts as per the direction and to the entire satisfaction of the Engineer-in-charge.
Consultancy charges for preparation, approval of design and drawings duly vatted from the NIT or IIT as per direction of Engineer in charge.
KDN Infrastructure Pvt. Ltd. (BID ID -484487)
M/s Ashwani Kumar Govt. Contractor (BID ID -485217)
Rishi Rajan (BID ID -484153)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
BOQ_144824.xls
BOQ • 0.28 MB
161440729.pdf
Tender Documents • 0.35 MB
161440731.html
Tender Documents • 0.07 MB
FORMEIGHT.pdf
Tender Documents • 0.55 MB
FORMSIX.pdf
Tender Documents • 0.31 MB
TERMSANDCONDITION.pdf
Tender Documents • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .