CONSTRUCTION OF 5,000 GALLONS PER HOUR CAPACITY RAPID GRAVITY SAND FILTERATION PLANT INCLUDING PUMP ROOM BUILDING, INTAKE AND OTHER ALLIED WORK AT GOHRA UNDER WSS THULA DI PERI LANGUISHING PROJECT

Amount

Earth work in excavation by manual means in tranches for foundation, drains, pipes, cables etc. (Not exceeding 1.5m in width) and for shafts, wells, cess pits and the like not exceeding 10 Sqm on plan, depth upto 1.5m, including disposal of excavated earth upto 1 mtr from cutting edge, disposal earth is to be levelled and neatly dressed in all kinds of soil

Providing and laying in position cement conc. Of sepcified grade excluding cost of Centering & Shuttering all work up to plinth level 1:4:8 (1 Cement: 4 Coarse sand: 8 graded crused stone aggregate 40mm nominal size.

RCC work in walls (any thickness) including attached pilasters buttresses, plinth and string coarse, fillets, coloumns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1:2 ( 1 cement: 1 coarse sand: 2 graded crushed stone aggregate 20mm nominal size).

Providing and laying of reinforced in cement concrete 1:1.5:3 (1 cement :1.5 coarse sand :3 graded crushed stone aggregate 20mm nominal size) in suspended floors, balconies, landings and staircase having upto 15 degree slope excluding cost of centering and shuttering all work upto floor V level.

Providing and laying in position cement conc. Of sepcified grade excluding cost of Centering & Shuttering all work up to plinth level 1:3:6 (1 Cement: 3 Coarse sand: 6 graded crused stone aggregate 20mm nominal size.

Supplying of stone/boulder (nallah) nominal size 225mm (stack measurement reduced by 15%),

Dumping stone excluding cost of stones. In horizontal on level.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 Cement: 6 Coarse sand).

Extra for brick work in superstructure above plinth level upto floor V level (by manual means)

providing & laying damp proof course 40mm thick with cement concrete 1:2:4 (1 Cement: 2 Coarse sand: 4 graded crushed stone aggregate 12.5mm nominal size).

Reinforced cement conc. Work in beams suspended floors, roofs, having slope upto 15 landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staireases and spiral staircases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 Cement: 2 coarse sand: 4 graded crushed stone aggregate 20mm nominal size)

Cement conc. flooring 1:2:4 (1 cement: 2 Coarse sand: 4 graded crushed stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of noising of steps etc. complete (40mm thick with 20mm nominal size crushed stone aggregate)

Centering and shuttering including strutting, propping etc. and removal of form for:- a) Foundations, footings, bases of columns etc. for mass concrete.

a) Walls (any thickness) including attach Pilasters, Buttresses, plinth and string courses etc

b) Lintels and beams, plinth beams, girders, bressumers and cantievers.

Suspended floors, roofs, landings, balconies and acess platform.

Columns, Pillars, Piers, Abutments, Posts and struts

Edges of slabs and breaks in floors and walls under 20cms wide.

Reinforcement for RCC works including straightening cutting, bending, placing, in position and binding all complete. Cold twisted bars.

Structural steel work welded in built up sections trusses and framed work, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. Squares or round bars etc. including priming coat with approved steel primer all completes & fixed to steel windows by welding.

Providing and fixing GI Pipe complete with GI fittings external works 32mm dia

Providing & fixing of 1mm thick M.S. Steel door with frame of 40X40X6mm angle iron & 3mm M.S. gusset plates at the junctions & corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angle 40X40X6mm for diagonal braces.

15mm cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 Cement: 4 Coarse sand)

Making plinth protection 50mm thick of cement conc. 1:3:6 (1 Cement: 3 Coarse sand: 6 graded crushed stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colours shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 60x60cm.

Steel work welded in built up sections/framed work incl. cutting hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and left upto 1.5mtr.

White washing with lime to give an even shade. New work (Three or more coats)

Finishing walls with water proofing cement paint of approved brand and manufacture & of required shade to give an even shade. New work (two or more coats) applied @ 3.84 Kg/10 Sqm

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give and even shade. New steel work (Two or more coats)

Providing and stacking of Stone agreegate (Filter Media) of following nominal size Nallah a) 63-50mm nominal size

b) 50-40mm nominal size

c) 40-25mm nominal size

d 25-12.5mm nominal size

e) 12.5-6mm nominal size

Supply of Brocer Sand including carriage from source i.e Kolkata (West Bengal) to site of work including stacking and filling in Filter Bed (LMR)

Filling including grading of Filter Media in Filter Bed

Providing and fitting of Electrical motors Kirloskar /ABB/KBL/Crompton Greavs/ISI make of 2HP capacity of Head 25mtr including installation, testing complete job (LMR)

Providing and fixing of C.I sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately a) 100mm dia class II

b)150mm dia class II

Providng and Laying of D.I Specials of Class K-12 suitable for mechanical jointing as per IS: 9523 upto 600mm dia Tee 150x150x100mm = 2 No, Tee 100x100x100mm = 3 No, Bend 150mm dia 90 degree = 1 No and Bend 100mm dia 90 degree = 1 No

Providing, fitting and testing of Air Compressor 7.5HP capacity with motor Gurdil/KAY/LG ISI make including installation commissioning with all accessories with 80mm dia GI pressure pipe C class including Air pressure Ball 80mm dia upto FIlter Bed complete JOB (LMR)

Providing and fitting including testing of Switches and starter Siemens/L & T /crompton make complete job a) 5-7.5HP/KW 16AMP (LMR)

b) 1.5-5HP/KW 16AMP (LMR)

Providing and fitting of flash mixer including accessories complete job (LMR)

Providng and installation of equipment for Alum Tank including accessories complete Job (LMR)

Providing and laying double flanged (screwed/ welded) centrifugally (spun) ductile iron pipes of class K-9 conforming to IS: 8329 a) 150mm dia ductile iron double flanged

b) 100mm dia ductile iron double flanged

Provision for electric fitting including underground wiring with PVC conduit pipes, steel boxes PVC insulated wire and fittings and accessories complete job (LMR)

Carriage of steel in all terrains through a lead of 30km by M.T and 800 mts by head load including cost of loading, unloading and stacking.

Carriage of stone aggregate below 40mm nominal size (crushed) by M.T in all terrains through a lead up to 12 kms and 800 mts by head load including cost of loading, unloading and stacking.

Carriage of stone aggregate below 40mm nominal size (Nallah) by M.T in all terrains through a lead up to 75 kms from Chenab Reasi and 800 mts by head load including cost of loading, unloading and stacking.

Carriage of stone aggregate 40mm nominal size and above (crushed) by M.T in all terrains through a lead up to 12 kms and 800 mts by head load including cost of loading, unloading and stacking.

Carriage of stone aggregate 40mm nominal size and above (Nallah) by M.T in all terrains through a lead up to 75 kms from Chenab Reasi and 800 mts by head load including cost of loading, unloading and stacking.

Carriage of sand by M.T in all terrains through a lead up to 45 kms and 800 mts by head load including cost of loading, unloading and stacking.

Carriage of bricks for a distance of 10 Km by MT and 800 mts by head load from nearest brick kiln including cost of loading and stacking.

Carriage of stones for an average distance of 12 kms by MT in all terrains and 800 mts by head load including cost of loading, unloading and stacking.

Krishan Lal

M/S PADHA CONSTRUCTIONS CO.

RAJESH KUMAR

ANIL BROTHERS