Restoration of Rain Damages of LWSS Chambi Jola in Tehsil Sadar Distt Mandi HP

Amount

Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge.

Providing and laying cement concrete 1:3:6(1cement:3 sand:6 graded stone agg. 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:6:12 (1cement: 6 sand ):12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in:- Foundation & Plinth in all respect and to entire satsfection of Engineer -in-Charge in all leads and lifts.Under base wall.

Providing and laying Cement Concrete 1:1.5:3 (1 cement 1:5 sand: 3 graded stone aggregate 20 mm and curing complete excluding cost of form work in:reinforcement and reinforced cement concrete:-in foundation and plinth for footing.

For Pillar

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in posi and binding all complete upto plinth level. steel and Medium Tensile steel bars in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm, so as to give a fair finish including centering ,shuttering, propping etc.with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:- Vertical surface such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge.

Random rubble stone masonry coursed with hard stone of approved qualityin foundation and plinth including racking out joints in cement mortor 1:4 (1 cement : 4 sand) in all leads and lifts.

15 mm cement plaster in single coat on rough side of Brick/Concrete/ stone walls for interior plastering up to floor two levels including arries, internal rounded angels, chmfers and /or rounded angles not exeeding 80mm in grith and finished even and smooth in cement morter 1:3 (1 cement: 3 coarse sand) in all leads and lifts.

Repair and maintenance of Rising Main by cutting and welding of GI pipe diameter mentioned below ie. By buttwelding and Gas welding two layers including cost of cutting of GI pipe and carriage of welding set and DG set by Machanical transport and head lead up & down complete job in all respect and to entire satsfection of Engineer -in-Charge in all leads and lifts.65mm diameter

80 mm dia

Providing and fixing Cast iron Sluice valve of Bir /KARTAR/PELICON make BIS No. 14846 class PN 1.00 with flange Table-5 welding of flanges nut & bolts and gasket etc.The sluice valve conforming to IS-780 having class PN-1.0. The dia of valve as mentioned below complete in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.65 mm dia

80mm dia

GULZARI LAL (BID ID -521821)

Rajesh Kumar (BID ID -521826)