Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.3 LAccepted-Finance HIMACHAL PRADESH HP | ₹3.3 L | L1 | Accepted-Finance Lowest |
| 2 | L2₹3.3 L+₹1,605.06 (0.49%)Rejected-Finance R O VILL GARH P O BARRAM TEHSIL JAISINGHPUR DISTT KANGRA H P | KANGRA | HIMACHAL PRADESH | 175013 | ₹3.3 L+₹1,605.06 (0.49%) | L2 | Rejected-Finance Other than Lowest |
| 3 | L3₹3.3 L+₹2,910.09 (0.89%)Rejected-Finance | ₹3.3 L+₹2,910.09 (0.89%) | L3 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | ASHWANI KUMAR L2 | MANDEEP L3 | AJAY KUMAR L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respect. | 400.03 | cum | 482 ₹1,92,814.46 | 483 ₹1,93,214.49 | 480 ₹1,92,014.4 Lowest |
| 2.00 | Cutting of Gl Pipe of various dia with generator welding set including carriage at site of work complete in all respect in all leads and lifts. 100mm Diameter. | 55 | Nos. | 103 ₹5,665 | 105 ₹5,775 | 100 ₹5,500 Lowest |
| 2.01 | 65 mm Diameter. | 90 | Nos. | 66 ₹5,940 | 67 ₹6,030 | 65 ₹5,850 Lowest |
| 2.02 | 50 mm Diameter. | 85 | Nos. | 56 ₹4,760 | 58 ₹4,930 | 55 ₹4,675 Lowest |
| 2.03 | 40 mm Diameter. | 50 | Nos. | 47 ₹2,350 | 49 ₹2,450 | 45 ₹2,250 Lowest |
| 3.00 | Welding of Gl pipe of various dia with Diesel Generator welding set at site of work according to site requirement in minimum three layers to make the joint leakproof according to relevant BIS standards/approved specifications and to the entire saitsfactioin of the Engineer-in-charge complete in all respect in all leads and lifts.100 mm dia | 55 | Joints | 551 ₹30,305 | 553 ₹30,415 | 550 ₹30,250 Lowest |
| 3.01 | 65 mm Diameter. | 90 | Joints | 421 ₹37,890 | 422 ₹37,980 | 420 ₹37,800 Lowest |
| 3.02 | 50 mm Diameter. | 85 | Joints | 362 ₹30,770 | 363 ₹30,855 | 360 ₹30,600 Lowest |
| 3.03 | 40 mm Diameter. | 50 | Joints | 391 ₹19,550 | 394 ₹19,700 | 390 ₹19,500 Lowest |
Tender Value
₹3.4 L
EMD Value
₹6,750
Closing Date
16 Jun 2026, 5:00 pmClosed
Executive Engineer
EE JSV Mandi
Cutting and Butt welding of GI pipe 100mm, 65mm and 40mm dia at various RD
2026_HPIPH_135916_1
6687-6786
Open Tender
Civil Works
Item Rate
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹350
₹6,750
16 Jul 2026
6 Jun 2026
18 Jun 2026
6 Jun 2026
16 Jun 2026
6 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respect. | 400.03 | cum | - | - |
| 2 | Cutting of Gl Pipe of various dia with generator welding set including carriage at site of work complete in all respect in all leads and lifts. 100mm Diameter. | 55 | Nos. | - | - |
| 2.01 | 65 mm Diameter. | 90 | Nos. | - | - |
| 2.02 | 50 mm Diameter. | 85 | Nos. | - | - |
| 2.03 | 40 mm Diameter. | 50 | Nos. | - | - |
| 3 | Welding of Gl pipe of various dia with Diesel Generator welding set at site of work according to site requirement in minimum three layers to make the joint leakproof according to relevant BIS standards/approved specifications and to the entire saitsfactioin of the Engineer-in-charge complete in all respect in all leads and lifts.100 mm dia | 55 | Joints | - | - |
| 3.01 | 65 mm Diameter. | 90 | Joints | - | - |
| 3.02 | 50 mm Diameter. | 85 | Joints | - | - |
| 3.03 | 40 mm Diameter. | 50 | Joints | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
BOQ_201221.xls
BOQ • 0.29 MB
Form6.pdf
Tender Documents • 0.67 MB
Form8.pdf
Tender Documents • 1.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .