CA NO. CWE BLY /GE(W) / 79 OF 2021-2022 SPECIAL REPAIRS TO ROOF CEILING AND PAINTING WORK AT BLDG NO RA-III OF HQ UB AREA UNDER GE (WEST) BAREILLY

Amount

Taking down chowkats or frames not exceeding 1.50 Sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

Taking down chowkats or frames exceeding 1.50 sqm and n.exc 4 sqm each with shutter (w/o taking off shutter from the frames)complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates of size 105 mm X 60 mmx2mm , including fixing of necessory lugs , hinges , lock strike plates , etc. complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates of size 125 mm X 60 mmx2mm , including fixing of necessory lugs , hinges , lock strike plates , etc. complete all as specified and directed.

M&L plain cement concrete (1:3:6) type C-0, (using 12.50 mm graded stone aggregate) for filling in pressed steel frame etc. complete all as specified and directed.

M&L Rolled mild steel angles, bar, flats etc, as in supports for stiffening of fencing, wall tiles, hold fasts, clamps and similar small articles confirmming to Fe-410-O or Fe-310-O complete all as specified and directed.

M&L plain cement concrete (1:3:6) type C-1, (using 20 mm graded aggregate) as in hold fast, benching, coping etc. complete all as specified and directed.

S&F 30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides including teak wood lipping 6 mm thick fixedwith nails complete all as specified.

M&L for glazed and skeleton shutter, 35 mm thick of 2nd class HW(SAL), open rebated and prepare to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. Size of members of shutter as specified in SSR Pt-I, section 8, clause 8.24(a) supplied & filled to chowkat complete all as specified and directed.

S&F 300mm size ordinary mild steel , rat tail rod pattern springs including roller and roller plate and welded to mild steel frame complete all as specified and directed.

S&F Mild Steel barrel tower bolt, stove enameled black with bright bolt of length 200 mm complete all as specified and directed..

S&F 300mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M&L for 150mm long mild steel pressed handles,, oval type, stove enamelled complete all as specified and directed.

S&F140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

M&L painting to wooden surface exc 10 cm width or girth with applying two coats of synthetic enamelled paint over a coat of pink oxide including prepration of newly or previously untreated surface complete all as specified and directed.

S&F MS Box type Steel windows (Double Shutter) with Pressed steel frame (dimension- 95X45X1.25 mm ),with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with Glazed openable shutter with glazing bars( out side shutters) and wire gauged openable shutter without glazing bars ( inside shutters ), dovetailed or welded complete all as specified and directed & shown on Drg No- TD/088 dt 07 Jan 2002. Note:- Guard bar shall be measured and paid seperately

Mild steel framed work such as in grills, grafting, framed guard bar and similar work conforming to Fe-410-0 ro Fe 310-0 complete all as specified and directed.

S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L painting to steel surfaces exc 10 cm width or girth with applying two coats of synthetic enamel paint over a coat of red oxide primer including prepration of newly or previously untreated surface complete all as specified and directed.

Dismantling asbestos cement (Corrugated or Semi corrugated) sheets` of any description and in any position as in roof coverings including connected ridge complete all as specified and directed.

Dismantling of timber infillets, rails, posts, rafters, purlins etc over 40 sqcm in section, of any description and in any position unframed work complete all as specified and directed.

Dismantling of timber infillets, rails, posts, rafters, purlins etc under 40 sqcm in section, of any description and in any position unframed work complete all as specified and directed.

M&L second class hard wood (SAL) in scantlings, clean sawn, timber framed & fixed in position complete all as specified and directed.

M&L second class hardwood (SAL) plain, fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exceeding 13 sqcm and not exceeding 25 sqcm complete all as specified and directed.

M&L 6 mm thick asbestos cement corrugated sheets in roofs fixed with L type or J type or cranked hook bolts complete all as specified and directed.

M&L 6 mm thick asbestos cements two piece adjustable serrated ridges for corrugated sheets fixed with L type or J type or cranked hook bolts complete all as specified and directed. (Note:- Two piece adjustable ridge per RM shall be measured as one unit)

Dismantling structural steel work of any description and in any position including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack refters, purlins where connected to common rafters and running and guides for sliding doors fixed with cleats or other connecting plates complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for non skid, joint free, ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in matching colour over screed bed or bedding layer complete all as specified and directed.

M&L 15 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor tiles etc. complete all as specified and directed.

M&L for non skid, joint free, ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting/dado etc. set and jointed in neat cement slurry and pointed in matching colour bed or bedding layer complete all as specified and directed.

M&L glazed ceramic coloured tiles 350 x 250 mm x 7mm/450x350x7mm thick on vertical surfaces such as skirting, dados, & riser to steps, set & jointed in neat cement slurry & pointed in coloured cement to match the tile colour complete all as specified and directed.

M&L for 10mm thick in CM 1:4 rendering/backing coat for skirting/dado on brick or concrete surface rough finished etc complete all as specified and directed.

S&F in repairs for 4mm thick E-board tiles (everest or equivalent) in patches for insulations acoustic purpose of size 600x600mm fixed with and including anodised snap grid with 25x25x1.5mm thick Tee section and 38x25x2mm thick angle section with all hanging/supporting arrangements as in false ceiling at bottom at spacing 60cm centre to centre including GI clits and 4mm dia GI wire as suspender fixed to ceiling not exc 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceilling complete all as specified and directed.

Taking down cement plaster of any description on walls including raking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on concrete surfaces or on faces of brick masonry finished even and smooth witout using extra cement including scaffolding or jhula complete all as specified and directed.

M&L retendering 15mm thick on brick wok or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement including necessary scaffolding or Jhula complete all as specified and directed.

M&L for applying two coats of oil bound distemper over one coat of primer on newly plastered surfaces including perpetration of new plastering surface including necessary scaffolding or Jhula complete all specified and directed.

M&L for complete removal of old finishes from walls by scrapping, rubbing down, with sand paper to have even and smooth surfaces and applying two coats of oil bound distemper over one coat of primer complete all specified and directed including necessary scaffolding or Jhula complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying a layer of Birla/JK White wall care putty to obtain smooth regular/even finish using sand paper and apply two coats of exterior emulsion paint 1st quality including necessary scaffolding or Jhula complete all specified and directed.

M&L for complete removal of existing treatment on walls and applying 2mm thick of Birla/JK White wall care putty to obtain smooth regular/even finish using sand paper and apply two coats of interior emulsion paint 1st quality of complete all as specified and directed.

M&L for preparing old distempered surface of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

S&F 15mm bore galvanized steel tubes, medium grade for flush pipes, water supply pipes etc fixed to walls and ceilings or laid in floors including taking up or down of 15 mm tubes complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring etc and making good in PCC or CM not exceeding 10cm girth complete all as specified and directed.

S&F stainless steel curtain rods 32mm dia with bracket and ends etc fixed in repair complete all as specified and directed.

Demolition of brick or stone/boulder masonry built in cement mortar complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 using old size bricks complete all as specified and directed

Demolition of stone set paving of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed

M&L for rubber moulded Machine pressed precast concrete interlocking paver any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade match with grey cement and pigment complete all as specified and directed

M&L for for pre-cast cement concrete block masonry with solid blocks, type C1 1:3:6 (20 mm graded aggregate) exc. 10cm in width and setting in CM 1:4 complete all as specified and directed.

M&L for sand filing under floors or in foundations including watering and consolidation complete all as specified

M&L 75mm thick PCC 1:4:8 type D2 1:4:8 using 40 mm graded stone aggregate in sub base of floor, finished even & fair without using extra cement complete all as specified and directed.

Removal of existing treatment and wire brushing and cleaning top surface of tiles and roofs to preparation of surface for applying in primer and bitumen.

M&L plain cement concrete 1:2:4 of type B0 (using 12.5 mm graded stone aggregate) as in filling and mass concrete etc complete all as specified and directed.

M&L rendering 10mm thick in CM 1:4 on fair faces of brick or concrete surface and complete all as specified and directed

Applying evenly a coat of bituminous primer confirming to IS 3384 – 1986 @ 0.40 Kg/Sqm complete all as specified and directed

M&L Applying evenly a tack coat of bitumen of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete all as specified and directed.

M&L APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/Sqm) land on primed surface by forced application complete all as specified.

M&L screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:4 complete all as specified.

M&L plain cement concrete tiles 20cmx20cm x20mm thick, machine pressed jointed with grey cement and no pigment and pointed in neat cement slurry in floors and cut and polished complete all as specified.

Supply only liquid water proofing compound Acrylic polymer Chemseal or equivalent

Dismantling of existing water tanks capacity exc 250 ltr but n.exc 500 ltr and removing to store and S&F rotational moulded polyethylene water tank of 500 ltrs capacity white colour triple layers (Cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part-I etc complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slope to 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and provided 6mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) completed all as specified and directed.

M&L PCC type C2 1:3:6 using 40 mm graded stone aggregate in surface channels and drains complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed

Add or deduct for each 25mm girth or part there of over or under 30cm ditto as per item No 67 above complete all as specified and directed.

S&F in repairs chromium plated fancy type stop valve/angle valves with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15mm bore pipe complete all as specified and directed. CAT Part No ARI 39053 Jaquar or equivelant make as approved by GE

S&F in repairs 15mm bore Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed. CAT No ALD-573 or equivelant make as approved by GE

S&F of soap disk type fixed to plug with CP brass screws complete all as specified and directed. CAT Part No AKP-35731 P Jaquar or equivalent or equivelant make as approved by GE

S&F of toilet roll holder type fixed to plug with CP brass screws complete all as specified and directed. CAT Part No AKP-35753 P Jaquar or equivalent

S&F in repair of glass corner selfs with brackets with railing and complete all as specified and directed. CAT Part No CAN - 1173 Jaquar or equivalent or equivelant make as approved by GE

S&F in repairs Vitreous china wash down water closet single peach 755 x 365 x 655 trap distance 300mm and built with cistern white complete, including slow falling sheet cover connection to drain pipe and to flushing pipe anti syphonage pipe etc complete all as specified and directed. CAT Part No LYS WHT-0204 Jaquar or equivalent

S&F in repairs Vitreous china ware wash hand basin flat back, size 550x400mm in repairs including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with o without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in repairs Vitreous china urinal, half staff type, white (excluding flushing cistern, flush pipe & waste pipe) including CP spreader complete all as specified and directed

E&M Part: Taking down carefully copper/aluminium point wiring light, fan, socket or power point complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, bell push, bell buzzer etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable (red colour cable to be used for live connection and black colour cable to be used for neutral connection) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.0 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for one light/fan/bell point controlled by one switch/bell push complete all as specified and directed.

All as per Sl.Item No 82 above but One 5 Pin, 5 Amp, Switch Socket outlet point on idenpendent board.

All as per Sl.Item No 82 above but One 5 Pin 5 Amp, Socket outlet point controlled by one switch on the same board.

All as per item No 82 here in before but for one 15 Amp 6 pin switch socket outlet independent with 2.5 sqmmm FRLS (Nominal area) PVC unsheathed copper conductor single core multistranded complete all as specified and directed.

S&F Switch, Piano, flush type, polycarbonate, 5 Amps, Single Pole, One way complete all as specified and directed.

S & F Socket outlet, polycarbonate, 2 in 1, 3 Pin Amps, 5 Pin, multipurpose, flush type complete all as specified and directed.

S&F Socket outlet, polycarbonate, 2 in 1, 6 pin, 5/15 Amps multipurpose, flush type complete all as specified and directed.

S&F Switch, Piano, flush type, polycarbonate, 15 Amps, Single Pole One way complete all as specified and directed.

S&F in replacementl of fan regulator 150 watt electronic flush socket type with fivestepped range hum free complete all as specified and directed.

Taking down sub main wiring (any type & any no of runs) including earth wire/service connection and making good disturbed surfaces to match with the existing surfaces of walls including removing from site complete all as specified and directed.

M&L for sub main wiring with two single core 6.0 sqmm (FR) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 2.5 sqmm (FR) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dilly all as specified and direced. Note :- Two runs of 6.00 sqmm (FR) and one run of 2.5.0sqmm (FR) copper conductor shall be measured as one unit length)

S&F Ceiling rose, PVC polycarbonate, isolated body, 3 terminals, AC 230 volts complete all as specified and directed.

S&F MCB, Single Pole & Neutral, 63 Amps, 240 V, 'B' curve, 10 KA complete all as specified and directed. CAT No CSMBS1B40/63 N manufactured by M/s C&S or equivalent model manufactured by M/s Legrand/ Schneider.

S&F MCB, Single Pole, 6 to 32 Amps, 240 V, 'B' curve, 10 KA complete all as specified and directed. CAT No CSMBS1B6-32 manufactured by M/s C&S or equivalent model manufactured by M/s Legrand/ Schneider.

Supply and fix flush Sheet Metal enclosure, SPN, DB, 8 Way with double door, IP-42 Protection, detachable gland plate, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete all as specified and directed. Cat Part No CSDBSPSPNSD04 manufactured by M/s C&S or equivalent model manufactured by M/s Legrand/ Schneider.

Supply & fix Surface Mounting LED, indoor decorative, PVC extruded T-5 batten, 20Watt, 4 feet long fitting including connection with 23/0.0076, three core, PVC flexible cable complete all as specified and directed. Cat No LTTB4F20WLED P/W manufactured by M/s C&S or equivalent model manufactured by M/s Philips/Bajaj.

S&F Lamp Holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply& fixing in replacement of LED bulb 09 Watt 230 V AC integrated circuit complete all as specified and directed

M & L for earthing complete including taking out old UNSV and replace with galvanised steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounding with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode molulded and riveted to earth plate at one end and connected to main to main switch/control switches fo buildings at another end, GI earth wire encased in and including 15mm bore GI ‘light grade’ pipe from upper end of earth plate upto main switch board of building including 20 bore GI ‘light grade’ as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced all as specified and directed .

Supply and fix Security light fitting, LED type, 25 Watts, 6000 K, Pressure die cast housing with Prismatic Polycarbonate diffuser & individual LEDs as light source with integrated electronic driver complete with GI Pipe Mounting bracket of size 32mm dia and 1.20m long fixed to wall with and including nuts, bolts and GI clamps made out MS flat Iron of size 50x6mm as required including two coats of synthetic enamel over a coat of primer and making connection with three core 23/0.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed Cat No:- BCLST 25W LED manufactured by M/s Bajaj or equivalent model manufactured by M/s Philips/C&S.

Taking down, testing, repair and replacement of necessary item such as bearing , bush, shaft , painting etc and refixing carefully serviceable ceiling fan of size 1200/1400mm , 230V, AC type including provision of new single core twin twisted cable from ceiling rose to ceiling fan connector completed all as specified and directed by Engr-in-Charge..

S&F in replacement sheet metal enclosure DB’s 415 Volts IP 42 vertical suitable for mounting MCCB’s TPN, 4 way with 200 Amps rated copper bus complete all as specified and directed.

S&F in repairs MCCB TPN 125 Amps, 415V, 16 KA , Thermal Magnetic Release complete all as specified and directed.

Supply and laying cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminimum conductor of size 35Sqmm 4 core as required at site and complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts,UG cables etc. not exc. 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated soil to distance n.exc. 50m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L for Sand cushioning for cables all as specified and directed. Note : Punned sand layers measured only

M&L for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

S&F in replacement GI pipe light grade of 50mm bore for cable protection, fixed to pole/alongwith/floor/under road/across the drain or nallaha etc complete all as specified and directed. Note : Tenderers may note that amount of credit Rs 53,869.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

hardeep singh enterprises

M/S YASHCON CONSTRUCTIONS

Builders Harpal

REHAN CONSTRUCTION

RIYASAT ALI KHAN

Shikhar ji Enterprises