Construction of PHC building at Kalimatii under Joda block and at Malda under Jhumpura block in the district of Keonjhar Odisha

GOVT. OF ODISHA

WORKS DEPARTMENT

DIVISION - KEONJHAR (R&B) DIVISION

SUB-DIVISION - KEONJHAR (R&B) SUB-DIVISION NO-I

SECTION - SADAR 'B' (R&B) SECTION

NAME OF THE WORK - Construction of 6 Nos. 'E' type Quarters at CHC, Telkoi for the year 2022-23 under DMF.

ESTIMATED COST: - `

Executive Engineer

Keonjhar (R&B) Division

GOVT. OF ODISHA

WORKS DEPARTMENT

DIVISION - KEONJHAR (R&B) DIVISION

SUB-DIVISION - KEONJHAR (R&B) SUB-DIVISION NO-I

SECTION - KEONJHAR (R&B) SECTION NO-II

NAME OF THE WORK -

ESTIMATED COST: - ` Lakh

NATIONAL HEALTH MISSION ,ODISHA

NAME OF THE WORK - CONSTRUCTION OF PRIMARY HEALTH CENTER AT KALIMATI, JODA BLOCK ,IN THE DISTRICT OF KEONJHAR,ODISHA

ESTIMATED COST: - ` Lakh

GENERAL ABSTRACT

CONSTRUCTION OF PRIMARY HEALTH CENTER AT KALIMATI, JODA BLOCK ,IN THE DISTRICT OF KEONJHAR,ODISHA

SL. NO. ITEMS AMOUNT

2 DISMANTLING WORK = 187025.81

3 SITE DEVELOPMENT = 105281.72

4 INTERNAL ELECTRICAL WORK = 821982.92

5 EXTERNAL ELECTRICAL WORK = 72006

6 PH WORK = 821314

7 FIRE WORK = 90480

B ADD GST 18% on (A)

C SUB TOTAL with GST(A+B)

GENERAL ABSTRACT

CONSTRUCTION OF PRIMARY HEALTH CENTER AT KALIMATI, JODA BLOCK ,IN THE DISTRICT OF KEONJHAR,ODISHA

SL. NO. ITEMS AMOUNT

1 PHC DAY CARE BUILDING =

2 DISMANTLING WORK =

3 SITE DEVELOPMENT =

4 INTERNAL ELECTRICAL WORK =

5 EXTERNAL ELECTRICAL WORK =

B ADD GST 18% on (A)

C SUB TOTAL with GST(A+B)

D NPCC MARGIN @7% on ( A )

E GST OVER NPCC MARGIN @18% on ( D )

F GRAND TOTAL(C+D+E)

(One Crore Forty Two Lakh Ninety Nine Thousand Six Hundred Sixteen Only )

CONSTRUCTION OF PRIMARY HEALTH CENTER AT KALIMATI, JODA BLOCK ,IN THE DISTRICT OF KEONJHAR,ODISHA

Sl. No. Item Description Quantity Units Estimated Rate TOTAL AMOUNT REMARK

1 CIVIL WORK Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works (5th Revision)and as per direction of Engineer-in-Charge.

2 Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.50m initial lift including rough dressing breaking clods maximum 5cm to 7cm & laying in layers not exceeding 0.3m depth for the work complete including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.

Excavation Cum OSR

3 Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge

4 Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.

5 Filling in foundation, plinth and other low laying area with excavated materials including cost of all labour, T&P etc compete including watering and ramming as directed by the Engineer-in-charge.

6 Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

i) Footing Cum OSR

ii) Plinth Band PB Cum OSR

iii) Columns Ground Floor Cum OSR

iv) Columns First Floor Cum OSR

v) Beam Ground Floor Cum OSR

vi) Beam First Floor Cum OSR

vii) RCC Roof slab ground floor Cum OSR

viii) RCC Roof slab First floor Cum OSR

ix) Lintel ground floor Cum OSR

x) Lintel first floor Cum OSR

xi) Chaja ground floor Sqm OSR

xii) Chaja first floor Sqm OSR

xiii) Staircase Ground floor Cum OSR

7 Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.

Ground Floor Qntl OSR

First floor Qntl OSR

8 Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.

Foundation Cum OSR

9 Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.

Ground floor Cum OSR

First floor Cum OSR

10 Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.

Ground floor Cum OSR

11 Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Ground floor Sqm OSR

First floor Sqm OSR

12 Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Ground floor Sqm OSR

First floor Sqm OSR

13 Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Ground floor Sqm OSR

First floor Sqm OSR

14 Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Ground floor & First floor Sqm OSR

15 Supplying, fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm plain (Ivory) of approved make (JOHNSON / VARMORA/ OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.

Ground floor Sqm OSR

16 Fixing tiles (Ceramic Wall Tile) in dadoo, skirting and rises of steps on12 mm thick cement plaster in mortar 1:3 (1 cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete.

Ground floor Sqm OSR

17 Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete in all respects as per direction of Engineer-in-Charge.

Ground floor Sqm OSR

18 Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.

Ground floor Sqm OSR

19 Fixing tiles (Kota Stone) in floors treads or steps and landing on 25 mm thick bed of cement mortar 1:1 (1 cement: 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete. OSR

Ground floor 0 Sqm

19 Fixing kota stone of approved dimension area above 0.1 sqm in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge. OSR

Ground floor 0 Sqm OSR

19 Fixing tiles (Ceramic Tiles) in floors treads or steps and landing on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete.

Ground floor Sqm OSR

20 Fixing tiles (Ceramic Wall Tile) in dadoo, skirting and rises of steps on12 mm thick cement plaster in mortar 1:3 (1 cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete.

Ground floor Sqm OSR

21 Providing & laying 80mm thick factory made cement concrete interlocking paver block of M-35 grade made by block makine machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Sqm OSR

22 Supplying fitting and fixing of GI Pressed Steel door with frames(100x80)mm size , 42mm thick steel shutter coated with polymeri powder includng cost of all hard ware fittings such as Stainless Steel Tower Bolt, SS Handle, Stainless, Steel ball bearing Butt hinges anchor fastner including cutting in brick / RCC wall complete.

D1(1200x2100) Nos 22283.7 MARKET RATE+OSR

D2(1050x2100) Nos 21317.7 MARKET RATE+OSR

D3(900x2100) Nos 19604.2 MARKET RATE+OSR

Supply and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Casement Door - 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55mm x 2.5mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5 mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners silicon rubber sealant. easy glazing/ deglazing at site etc., including cost and conveyance of all materials. accessories, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards. SQM 8963 MARKET RATE+OSR

24 UPVC WINDOWS

Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Three Track - Three Panel sliding window - 60 - Series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and Window Sash of 39mm x 58mm x 2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards. MARKET RATE+OSR

Ground floor SQM 5984 MARKET RATE+OSR

25 UPVC Ventilators For Toilets

Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) Top-Hung Ventilator of NCL VEKA LTD./ FENESTA / KOMMERLING or equivalent three track - only two glass shutters sliding duly manufactured using UPVC reinforced profiles of 80mm x 52mm x 2.25mm or equivalent for outer frames, 54mm x 38mm x 2.25mm or equivalent for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2mm prefabricated & welded through fusion welding the window sash shall be fitted with 5mm thick clear float glass (toughened) of reputed make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant,

easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge.

Ground floor SQM 7115 MARKET RATE+OSR

Providing, fitting, fixing of FRP DOOR (30mm ) including all cost of labour, hire charges of drilling machine, labour charges, etc. complete.

Ground floor SQM 3515 OSR

Providing, fitting, fixing of FRP DOOR FRAME including all cost of labour, hire charges of drilling machine, labour charges, etc. complete.

Ground floor Rmt 835 OSR

27 Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

28 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge.

Ground floor Rmt OSR

29 Finishing wall surface with acrylic wall putty (water based) of approved make and finished smooth on even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes with labour etc. complete as per direction of Engineer-in-charge.

Ground floor SQM OSR

First floor SQM OSR

30 Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.

Ground floor SQM OSR

First floor SQM OSR

31 Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.

Ground floor SQM OSR

First floor SQM OSR

32 Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.

Ground floor SQM OSR

First floor SQM OSR

33 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA): 6 graded stone aggregate 20 mm nominal size (Recycled Aggregate (RA) over 75mm thick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smoothcomplete as per specification & direction of Engineer in charge.(D.S.R-4.17B)

34 Diluting and injecting chemical emulsion for anti-termite treatment 372 Sqm 210 OSR

35 Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.

36 FOR BRANDING NAME PLATE BOARD FOR PHC 1 Nos 20000 MARKET RATE

37 Dismantaling brick or stone masonry in lime or cement motar under 3m height including stacking the useful materialsfor reuse and removing the debris within 50m lead.

Dismating and removing R.C.C. Columns, Beams, Slab, Staircase landings, lintels including stacking the useful materials for reuse and removing the debris within 50m. Lead.

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m

Providing & laying 80mm thick factory made cement concrete interlocking paver block of M-35 grade made by block makine machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-20 grade cement in position to the rquired line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves including making drainage opening wherever required complete etc as per direction of Engineer-in-Charge. Cum OSR

Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. Sqm OSR

Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make-Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FALLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.

GROUP-A 40 Nos 555 MARKET RATE

GROUP-B 30 Nos 791 MARKET RATE

GROUP-C 30 Nos 1088 MARKET RATE

Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type((anti bactorial & falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 12 Nos 1027 MARKET RATE

Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 20 Nos 193 MARKET RATE

Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant make & model ISI marked as approved , complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 26 Nos 508 MARKET RATE

Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make A catagory ISI marked as approved, (For equipement power)All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 25 Nos 645 MARKET RATE

Supplying,fixing of 2x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+2 no 6A switch & socket(modular type) ( (anti bactorial & falme retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 4 Nos 1381 MARKET RATE

Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch & socket(modular type) ( (anti bactorial & falme retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. 2 Nos 1969 MARKET RATE

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) 200 Mtr 131 MARKET RATE

2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5) 180 Mtr 145 MARKET RATE

4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5) 175 Mtr 263 MARKET RATE

2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR POINT/DG PANEL ESSENTIAL LOAD) (2X4+1X1.5) 220 Mtr 163 MARKET RATE

Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens/panasonic or equievalant reputed make & model A catagory ISI marked as approved,All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 5 Nos 616 MARKET RATE

Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed plug top along with 32 amps. C-series, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Equievalant higher model of Make-Legrand/Schneider/Siemens/panasonic equievalant reputed make & model A catagory ISI marked as approved.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 4 Nos 4346 MARKET RATE

Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side)(anti bactorial type) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

4 moudle(125mmx75mm) 4 Nos 267 MARKET RATE

1 moudle(75mmx75mm) 4 Nos 220 MARKET RATE

12 moudle(200mmx150mm) 4 Nos 482 MARKET RATE

Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor or equievalant reputed make A catagory ISI marked as approved

20 MM 12 mtrs 98 MARKET RATE

25 MM 12 mtrs 100 MARKET RATE

Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 10 Nos 107 MARKET RATE

Supplying and installation of AC starter Modular type, Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 2 Nos 619 MARKET RATE

Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 1 Nos 205 MARKET RATE

S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 10 EACH 61 MARKET RATE

Supplying,fixing of Blanking plate(modular type)( (anti bactorial & flame retradant type)) in existing switch box(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision), complete suitable for IPH standard hospital.It should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 10 Nos 42 MARKET RATE

Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years. 6 Nos 3122 MARKET RATE

Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years. 3 Nos 3673 MARKET RATE

Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) as required as per direction of Engg.-in-Charge.Replacement Warranty will be 5 years. 8 Nos 2210 MARKET RATE

Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Ushaor equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator) 22 Nos 2123 MARKET RATE

Supplying and fixing of Energy efficient Recess mounted LED luminaire made up of CRCA powder coated sheet steel housing of 595 X 595 mm x 70 mm size with of not more than 25W and system lumens output not less than 3250 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Trilux /Philips/Wipro or equievalant reputed make & model A catagory ISI marked as approved.) . The luminaire must be Replacement Warranty will be 5 years. 6 No 2677 MARKET RATE

Supplying and fixing of Energy efficient surface mounted square shape 20 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. ( Make : Panasonic /Trilux/Osram/PHILIPS/Wipro or equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years 35 Nos 1518 MARKET RATE

Supplying and fixing of Energy efficient recess mounted LED luminaire with white powder coated ,pressure die-cast Al housing ,with high transmititivity,non-yellowing PMMA diffuser, with wattage not more than 20 watt and lumen output not less than 2600 Lumen ( 130 lumens/watt ) of size 595 x595 x 70 mm , ,CRI not less than 80,CCT of 5700-6500 degree K,THD less than 10%, with Non integrated isolated driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation), all other accessories , life : 50,000 burning hours (5 years warranty) , Internal surge protection of 3 KV suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. ( Make : Panasonic / LT /Wipro/PHILIPS or equievalant reputed make & model A catagory ISI marked as approved.) The luminaire should be Replacement Warranty will be 5 years. 4 Nos 2428 MARKET RATE

SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Similar to Panasonic/PHILIPS/LT/wipro or equievalant reputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years . 35 Nos 797 MARKET RATE

SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. ( Make : WIPRO / PHILIPS/Panasonic or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years 6 Nos 732 MARKET RATE

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved. 8 Nos 33 MARKET RATE

Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 5 years

4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 2 years. 2 Nos 2168 MARKET RATE

Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITH CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD ) 2 Nos 1906 MARKET RATE

2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD) 2 Nos 1633 MARKET RATE

8 Way(8+24) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) 2 Nos 2702 MARKET RATE

Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years .MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years. 2 Nos 333 MARKET RATE

Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years. 50 Nos 132 MARKET RATE

Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .(4W TPN BDB IC)AC ODU CONTROLLER). The RCCB should be Replacement Warranty will be 5 years 2 Nos 2246 MARKET RATE

Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years 2 Nos 1688 MARKET RATE

Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years 2 Nos 1926 MARKET RATE

Supplying and fixing 63Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The RCCB should be Replacement Warranty will be 5 years 2 Nos 2220 MARKET RATE

Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.(for power BDB & AC ODU, 8 way TPN BDB IC).The RCCB should be Replacement Warranty will be 5 years 2 Nos 2641 MARKET RATE

S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 5 years 2 Nos 13897 MARKET RATE

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. 20 Mtr 96 MARKET RATE

Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. 14 Mtr 1096 MARKET RATE

Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge. 1 Mtr 2710 MARKET RATE

Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

4core x 16 sq mm (to FDB L/P ) 15 Mtr * #,##0.00\ ;* \(#,##0.00\);* \-#\ ;@\ MARKET RATE

4 core x 4 sq mm (for small power) 19 Mtr 87.87 MARKET RATE

3.5core x 35 sq mm (To MDB) 62 Mtr 218.41 MARKET RATE

3.5core x 95 sq mm ( FOR main panel light & power supply) 122 Mtr 475.31 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. 12 Mtr 130 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. 102 Mtr 145 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge. 16 Mtr 42 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge. 18 Mtr 58 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge. 16 Mtr 46 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge. 20 Mtr 46 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. 26 Mtr 81 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. 8 Mtr 131 MARKET RATE

Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.

4 core x16sq mm 7 Nos 196 MARKET RATE

3.5 core x35 sq mm 7 Nos 331 MARKET RATE

3.5 core x95 sq mm 7 Nos 403 MARKET RATE

Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.

50 mm dia 15 mtrs 412 MARKET RATE

Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.

200 mm dia 35 mtrs 833 MARKET RATE

S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list. 1 Set 85000 MARKET RATE

In commer-1-01 number of 160A 4P Icu=100%Ics,0, LSIG MCCB with micro processor based release Electrical locking for normal & DG (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(HVAC & MEDICAL EQUIPEMENT)(200 KVA TRANSFORMER)

Busbar-1&2 04 numbers of 300Amps Aluminium busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing)

Out going- 06 numbers of 63A 4P MCB (make- Legrand or equivalent reputed make ISI marked)BDB P/AC,Rawpower)

Out going- 1 numbers of 125A 4P Icu=50%Ics, LSIG MCCB withTMR based release with adjustable overload (make- LEGRAND/Schneider/ABB/Siemens, ISI marked)(RAW POWER)

Out going- 06 numbers of 32A 4P MCB ((make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(LIGHT SUPPLY)

Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.

(ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data.

(iii) 4 nos of 65kA SP VSD WITH 32A SP MCB

Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALL Light of elegant look Panasonic/philips/wiproor equievalant reputed make & model A catogory, ISI marked as approved 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light model will be vide Panasonic / Philips/LT/WIPRO make or equievalant reputed make A catagory ISI marked as approved having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge. 6 Sets 3203 MARKET RATE

Supply of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 5 years 4 Nos 2504 MARKET RATE

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge. 100 Mtr 96 MARKET RATE

Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. 15 Mtr 1096 MARKET RATE

S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type MCB ENCLOSURE made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 20A TPN MCB 01 NOLegrand/Schneider/L&T/ABB or equievalant make & model as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 2 years of acceptance of materials 3 Set 2044 MARKET RATE

Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 100 mtrs 106 MARKET RATE

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge

In Ground Floor-20mm dia C-PVC pipe (Ashirbad/Supreme) 80 Mtr MARKET RATE

25mm dia C-PVC pipe (Ashirbad/Supreme) 90 Mtr 352 MARKET RATE

Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge

In Ground Floor-25mm dia PVC ASTM Pipe 50 Mtr 197.5 MARKET RATE

50mm dia PVC ASTM Pipe 60 Mtr 361.8 MARKET RATE

In Terrace Floor-50mm dia PVC ASTM Pipe 30 Mtr 395.9 MARKET RATE

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.

In Ground Floor 0.0 Each 65.3 MARKET RATE

Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.

In Ground Floor 0.0 Each 171.6 MARKET RATE

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge

In Ground Floor 35 Mtr 184.5 MARKET RATE

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge

250mm to 375mm thick wall

In Ground Floor 25 Each 208.7 MARKET RATE

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge MARKET RATE

15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) 5 Each 1182 MARKET RATE

15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) 12 Each 763.6 MARKET RATE

20mm dia CP consealed stop cock(Con-CHR083KN Jaquar make) 7 Each 1182 MARKET RATE

15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) 5 Each 1034.3 MARKET RATE

15mm dia CP Health faucet (Con-ALD-CHR-573 Jaquar make) 5 Each 1378.8 MARKET RATE

15mm dia CP extension piece 12 Each 109.3 MARKET RATE

15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) 7 Each 960.5 MARKET RATE

125mm dia C.P.gratings. 18 Each 132.1 MARKET RATE

15mm C.P.revolving shower with 15mm x 225mm long CP shower arm. 5 Each MARKET RATE

15mm dia CP Elbow action Bib cock(Jaquar)FLR-CHR-5047N 6 Each MARKET RATE

25mm dia brass Fullway valve 5 Each 975.2 MARKET RATE

32mm dia brass Fullway valve 5 Each 1404.4 MARKET RATE

40mm dia brass Fullway valve 5 Each 1770.8 MARKET RATE

50mm dia brass Fullway valve 3 Each 2600 MARKET RATE

25mm CPVC Ball valve 5 Each 336.2 MARKET RATE

Providing and fixing Urinal of Hindware of cat no- 60005 quality conforming to IS standards. 1 Each MARKET RATE

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge

10 litres PVC L.L. Cistern (Slimline-white) 5 Each 1629 MARKET RATE

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge

100mm dia U-PVC SWR pipes(Supreme/Ashirvad) 55 Mtr 366.1 MARKET RATE

75mm dia U-PVC SWR pipes(Supreme/Ashirvad) 30 Mtr 235.6 MARKET RATE

100mm dia U-PVC 'P' trap 15 Each 275 MARKET RATE

100mm dia U-PVC Door Tee 16 Each 187.2 MARKET RATE

100mm dia U-PVC Plain Bend 14 Each 122.3 MARKET RATE

100mm U-PVC Door Cross Tee 13 Each 368.4 MARKET RATE

75mm dia U-PVC Door Bend. 14 Each MARKET RATE

75mm dia U-PVC Plain Bend. 10 Each 99.4 MARKET RATE

75mm dia Nahin trap 18 Each 173.3 MARKET RATE

75mm dia Multi Floor Trap 12 Each 295.3 MARKET RATE

110x75mm dia Reducer 15 Each MARKET RATE

110mm dia Vent cowl. 10 Each 88.4 MARKET RATE

W/C connector 10 Each 513.6 MARKET RATE

PVC Clamp suitable for 75mm to 110mm dia pipe 20 Each 49.3 MARKET RATE

Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal all complete as per specification and direction of the Engineer in charge

Fixing 580mmx440mm size Orissa pan (Parryware/Hindware/Neycer/Rak) 2 Each 2247.1 MARKET RATE

Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.

E.W.C. with seat cover (Parryware/Hindware/Neycer/Rak) 4 Each 3715 MARKET RATE

EWC(Matrix set)No.70002(P-18) 1 Each MARKET RATE

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge

550mm x 400mm size W. H. Basin with Half Pedestal (Parryware/Hindware/Somany) 7 Each 4092.8 MARKET RATE

Under Counter basin(Hindware)No.10095. 7 Each 4068.4 MARKET RATE

Half pedestal Basin(Hindware)No.91049+91115 Each 7717.1

Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge

Fixing 600mmx450mm size B.E mirror (fixed type) 6 Each MARKET RATE

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

600 x 125mm plate glass shelf with CP guard rails 8 Each 589.6 MARKET RATE

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

25mm x 600mm long CP towel rail 5 Each 692.3 MARKET RATE

CP towel rail Ring. 18 Each 459.4 MARKET RATE

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

CP soap holder 18 Each 173.2 OSR

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge

600x450x250 mm Porceloain sink(Hindware/Neycer) 6 Each MARKET RATE

Make-Aquaguard/Usha/Water Odisha 1 Each 30000 MARKET RATE

Supplying & Providing Over Head Water Tank 10,000 Litre (Syntex) 3000 Ltr. 8.5 MARKET RATE

Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge

Gully trap chamber of size 250mmx250mm with R.C.C cover slab 4 Each 1573 MARKET RATE

Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

Inspection chamber Inside size 760mmx760mmx460mm 4 Each 8055.7 MARKET RATE

1 H.P three phase 15 stage head range 20 to 35 metres, discharge 145 to 110 L.M.P with outlet dia of 25mm (Horizontal) 4 Each 13775.6 MARKET RATE

DOL Control panel 4 Each 3805.5 MARKET RATE

2.50sqmm flat cable 200 Mtr 128.1 MARKET RATE

2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm 1 Each MARKET RATE

DOL controll pannel 1 Each 3805.5 MARKET RATE

2.50sqmm cable 70 Mtr 128.1 MARKET RATE

32mm dia steel short piece 1 Each MARKET RATE

Steel rope with cover 60 Mtr 26.7 MARKET RATE

Well cap 1 Each MARKET RATE

50mm size CI bracket 1 Each 91.3 MARKET RATE

20mm dia rigid UPVC pipes 70 Mtr 6.9 MARKET RATE

Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.

-do- with Ist disintegrated rockadditional depth of 1.50 m over the initial lead and lift

Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge

In ground floor cum 425.1 OSR

Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.

In ground floor cum 4648 OSR

Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

In ground floor cum 6707 OSR

Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

plinth wall OSR

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

In ground floor 2 Qntl 9910 OSR

Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge

2 Each 344.6 OSR

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.

8 Each 193.4 OSR

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. Make: StopFire / Cease Fire / Kanex. Nos 10 MARKET RATE

Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.

Floor indentification signage ( ie, GROUND FLOOR, FIRST FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting colour from back ground.Size shall be 15cm x 60cm. Nos 15 MARKET RATE

Providing and fixing the signages "Fire Exit, Fire Exit Arrow Down,Fire Exit Arrow Left,Fire Exit Arrow Right" of 1.5in height letters in white with green back ground.The size of the board shall be 25cm x 15 cm and shall be fixed at the height of 2 mts Nos 15 MARKET RATE

GENERAL ABSTRACT

CONSTRUCTION OF PRIMARY HEALTH CENTER AT MALDA, JHUMPURA BLOCK ,IN THE DISTRICT OF KEONJHAR,ODISHA

SL. NO. ITEMS AMOUNT

2 DISMANTLING WORK = 126407.9

3 SITE DEVELOPMENT = 0

3 INTERNAL ELECTRICAL WORK = 821982.92

4 EXTERNAL ELECTRICAL WORK = 72006

5 PH WORK = 821314

6 FIRE WORK = 90480

B ADD GST 18% on (A)

C SUB TOTAL with GST(A+B)

CONSTRUCTION OF PRIMARY HEALTH CENTER AT MALDA, JHUMPURA BLOCK ,IN THE DISTRICT OF KEONJHAR,ODISHA

Sl. No. Item Description Quantity Units Estimated Rate TOTAL AMOUNT REMARK

1 CIVIL WORK Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works (5th Revision)and as per direction of Engineer-in-Charge.

2 Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.50m initial lift including rough dressing breaking clods maximum 5cm to 7cm & laying in layers not exceeding 0.3m depth for the work complete including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.

Excavation Cum OSR

3 Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge

4 Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.

5 Filling in foundation, plinth and other low laying area with excavated materials including cost of all labour, T&P etc compete including watering and ramming as directed by the Engineer-in-charge.

6 Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

i) Footing Cum OSR

ii) Plinth Band PB Cum OSR

iii) Columns Ground Floor Cum OSR

iv) Columns First Floor Cum OSR

v) Beam Ground Floor Cum OSR

vi) Beam First Floor Cum OSR

vii) RCC Roof slab ground floor Cum OSR

viii) RCC Roof slab First floor Cum OSR

ix) Lintel ground floor Cum OSR

x) Lintel first floor Cum OSR

xi) Chaja ground floor Sqm OSR

xii) Chaja first floor Sqm OSR

xiii) Staircase Ground floor Cum OSR

7 Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.

Ground Floor Qntl OSR

First floor Qntl OSR

8 Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.

Foundation Cum OSR

9 Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.

Ground floor Cum OSR

First floor Cum OSR

10 Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.

Ground floor Cum OSR

11 Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Ground floor Sqm OSR

First floor Sqm

12 Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Ground floor Sqm OSR

First floor Sqm OSR

13 Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Ground floor Sqm OSR

First floor Sqm OSR

14 Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Ground floor & First floor Sqm OSR

15 Supplying, fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm plain (Ivory) of approved make (JOHNSON / VARMORA/ OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.

Ground floor Sqm OSR

16 Fixing tiles (Ceramic Wall Tile) in dadoo, skirting and rises of steps on12 mm thick cement plaster in mortar 1:3 (1 cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete.

Ground floor Sqm OSR

17 Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete in all respects as per direction of Engineer-in-Charge.

Ground floor Sqm OSR

18 Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.

Ground floor Sqm OSR

19 Fixing tiles (Kota Stone) in floors treads or steps and landing on 25 mm thick bed of cement mortar 1:1 (1 cement: 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete.

Ground floor 0 Sqm

19 Fixing kota stone of approved dimension area above 0.1 sqm in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.

Ground floor 0 Sqm

19 Fixing tiles (Ceramic Tiles) in floors treads or steps and landing on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete.

Ground floor Sqm OSR

20 Fixing tiles (Ceramic Wall Tile) in dadoo, skirting and rises of steps on12 mm thick cement plaster in mortar 1:3 (1 cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete.

Ground floor Sqm OSR

21 Providing & laying 80mm thick factory made cement concrete interlocking paver block of M-35 grade made by block makine machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Sqm OSR

22 Supplying fitting and fixing of GI Pressed Steel door with frames(100x80)mm size , 42mm thick steel shutter coated with polymeri powder includng cost of all hard ware fittings such as Stainless Steel Tower Bolt, SS Handle, Stainless, Steel ball bearing Butt hinges anchor fastner including cutting in brick / RCC wall complete.

D1(1200x2100) Nos 22283.7 MARKET RATE

D2(1050x2100) Nos 21317.7 MARKET RATE

D3(900x2100) Nos 19604.2 MARKET RATE

Supply and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Casement Door - 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55mm x 2.5mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5 mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners silicon rubber sealant. easy glazing/ deglazing at site etc., including cost and conveyance of all materials. accessories, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards. SQM 8963 MARKET RATE

24 UPVC WINDOWS

Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Three Track - Three Panel sliding window - 60 - Series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and Window Sash of 39mm x 58mm x 2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards.

Ground floor SQM 5984 MARKET RATE

25 UPVC Ventilators For Toilets

Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) Top-Hung Ventilator of NCL VEKA LTD./ FENESTA / KOMMERLING or equivalent three track - only two glass shutters sliding duly manufactured using UPVC reinforced profiles of 80mm x 52mm x 2.25mm or equivalent for outer frames, 54mm x 38mm x 2.25mm or equivalent for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2mm prefabricated & welded through fusion welding the window sash shall be fitted with 5mm thick clear float glass (toughened) of reputed make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant,

easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge.

Ground floor SQM 7115 MARKET RATE+OSR

26 FRP Doors For Toilets

Providing, fitting, fixing of FRP DOOR (30mm ) including all cost of labour, hire charges of drilling machine, labour charges, etc. complete.

Ground floor SQM 3515 MARKET RATE+OSR

Providing, fitting, fixing of FRP DOOR FRAME including all cost of labour, hire charges of drilling machine, labour charges, etc. complete.

Ground floor Rmt 835 MARKET RATE+OSR

27 Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

KG MARKET RATE+OSR

28 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge.

Ground floor Rmt OSR

29 Finishing wall surface with acrylic wall putty (water based) of approved make and finished smooth on even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes with labour etc. complete as per direction of Engineer-in-charge.

Ground floor SQM OSR

First floor SQM OSR

30 Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.

Ground floor SQM OSR

First floor SQM OSR

31 Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.

Ground floor SQM OSR

First floor SQM OSR

32 Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.

Ground floor SQM OSR

First floor SQM OSR

33 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA): 6 graded stone aggregate 20 mm nominal size (Recycled Aggregate (RA) over 75mm thick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smoothcomplete as per specification & direction of Engineer in charge.(D.S.R-4.17B)

34 Diluting and injecting chemical emulsion for anti-termite treatment 372 Sqm 210 OSR

35 Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.

36 FOR BRANDING NAME PLATE BOARD FOR PHC 1 Nos 20000 MARKET RATE

37 Dismantaling brick or stone masonry in lime or cement motar under 3m height including stacking the useful materialsfor reuse and removing the debris within 50m lead.

Dismating and removing R.C.C. Columns, Beams, Slab, Staircase landings, lintels including stacking the useful materials for reuse and removing the debris within 50m. Lead.

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m

SITE DEVELOPMENT

Providing & laying 80mm thick factory made cement concrete interlocking paver block of M-35 grade made by block makine machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-20 grade cement in position to the rquired line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves including making drainage opening wherever required complete etc as per direction of Engineer-in-Charge. Cum

Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. Sqm

Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make-Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FALLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.

GROUP-A 40 Nos 555 MARKET RATE

GROUP-B 30 Nos 791 MARKET RATE

GROUP-C 30 Nos 1088 MARKET RATE

Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type((anti bactorial & falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 12 Nos 1027 MARKET RATE

Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 20 Nos 193 MARKET RATE

Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant make & model ISI marked as approved , complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 26 Nos 508 MARKET RATE

Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make A catagory ISI marked as approved, (For equipement power)All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 25 Nos 645 MARKET RATE

Supplying,fixing of 2x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+2 no 6A switch & socket(modular type) ( (anti bactorial & falme retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 4 Nos 1381 MARKET RATE

Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch & socket(modular type) ( (anti bactorial & falme retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. 2 Nos 1969 MARKET RATE

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials MARKET RATE

2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) 200 Mtr 131 MARKET RATE

2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5) 180 Mtr 145 MARKET RATE

4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5) 175 Mtr 263 MARKET RATE

2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR POINT/DG PANEL ESSENTIAL LOAD) (2X4+1X1.5) 220 Mtr 163 MARKET RATE

Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens/panasonic or equievalant reputed make & model A catagory ISI marked as approved,All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 5 Nos 616 MARKET RATE

Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed plug top along with 32 amps. C-series, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Equievalant higher model of Make-Legrand/Schneider/Siemens/panasonic equievalant reputed make & model A catagory ISI marked as approved.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 4 Nos 4346 MARKET RATE

Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side)(anti bactorial type) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

4 moudle(125mmx75mm) 4 Nos 267 MARKET RATE

1 moudle(75mmx75mm) 4 Nos 220 MARKET RATE

12 moudle(200mmx150mm) 4 Nos 482 MARKET RATE

Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor or equievalant reputed make A catagory ISI marked as approved

20 MM 12 mtrs 98 MARKET RATE

25 MM 12 mtrs 100 MARKET RATE

Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 10 Nos 107 MARKET RATE

Supplying and installation of AC starter Modular type, Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 2 Nos 619 MARKET RATE

Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 1 Nos 205 MARKET RATE

S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 10 EACH 61 MARKET RATE

Supplying,fixing of Blanking plate(modular type)( (anti bactorial & flame retradant type)) in existing switch box(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision), complete suitable for IPH standard hospital.It should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 10 Nos 42 MARKET RATE

Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years. 6 Nos 3122 MARKET RATE

Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years. 3 Nos 3673 MARKET RATE

Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) as required as per direction of Engg.-in-Charge.Replacement Warranty will be 5 years. 8 Nos 2210 MARKET RATE

Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Ushaor equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator) 22 Nos 2123 MARKET RATE

Supplying and fixing of Energy efficient Recess mounted LED luminaire made up of CRCA powder coated sheet steel housing of 595 X 595 mm x 70 mm size with of not more than 25W and system lumens output not less than 3250 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Trilux /Philips/Wipro or equievalant reputed make & model A catagory ISI marked as approved.) . The luminaire must be Replacement Warranty will be 5 years. 6 No 2677 MARKET RATE

Supplying and fixing of Energy efficient surface mounted square shape 20 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. ( Make : Panasonic /Trilux/Osram/PHILIPS/Wipro or equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years 35 Nos 1518 MARKET RATE

Supplying and fixing of Energy efficient recess mounted LED luminaire with white powder coated ,pressure die-cast Al housing ,with high transmititivity,non-yellowing PMMA diffuser, with wattage not more than 20 watt and lumen output not less than 2600 Lumen ( 130 lumens/watt ) of size 595 x595 x 70 mm , ,CRI not less than 80,CCT of 5700-6500 degree K,THD less than 10%, with Non integrated isolated driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation), all other accessories , life : 50,000 burning hours (5 years warranty) , Internal surge protection of 3 KV suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. ( Make : Panasonic / LT /Wipro/PHILIPS or equievalant reputed make & model A catagory ISI marked as approved.) The luminaire should be Replacement Warranty will be 5 years. 4 Nos 2428 MARKET RATE

SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Similar to Panasonic/PHILIPS/LT/wipro or equievalant reputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years . 35 Nos 797 MARKET RATE

SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. ( Make : WIPRO / PHILIPS/Panasonic or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years 6 Nos 732 MARKET RATE

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved. 8 Nos 33 MARKET RATE

Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 5 years

4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 2 years. 2 Nos 2168 MARKET RATE

Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITH CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD ) 2 Nos 1906 MARKET RATE

2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD) 2 Nos 1633 MARKET RATE

8 Way(8+24) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) 2 Nos 2702 MARKET RATE

Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years .MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years. 2 Nos 333 MARKET RATE

Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years. 50 Nos 132 MARKET RATE

Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .(4W TPN BDB IC)AC ODU CONTROLLER). The RCCB should be Replacement Warranty will be 5 years 2 Nos 2246 MARKET RATE

Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years 2 Nos 1688 MARKET RATE

Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years 2 Nos 1926 MARKET RATE

Supplying and fixing 63Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The RCCB should be Replacement Warranty will be 5 years 2 Nos 2220 MARKET RATE

Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.(for power BDB & AC ODU, 8 way TPN BDB IC).The RCCB should be Replacement Warranty will be 5 years 2 Nos 2641 MARKET RATE

S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 5 years 2 Nos 13897 MARKET RATE

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. 20 Mtr 96 MARKET RATE

Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. 14 Mtr 1096 MARKET RATE

Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge. 1 Mtr 2710 MARKET RATE

Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

4core x 16 sq mm (to FDB L/P ) 15 Mtr * #,##0.00\ ;* \(#,##0.00\);* \-#\ ;@\ MARKET RATE

4 core x 4 sq mm (for small power) 19 Mtr 87.87 MARKET RATE

3.5core x 35 sq mm (To MDB) 62 Mtr 218.41 MARKET RATE

3.5core x 95 sq mm ( FOR main panel light & power supply) 122 Mtr 475.31 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. 12 Mtr 130 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. 102 Mtr 145 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge. 16 Mtr 42 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge. 18 Mtr 58 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge. 16 Mtr 46 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge. 20 Mtr 46 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. 26 Mtr 81 MARKET RATE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. 8 Mtr 131 MARKET RATE

Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.

4 core x16sq mm 7 Nos 196 MARKET RATE

3.5 core x35 sq mm 7 Nos 331 MARKET RATE

3.5 core x95 sq mm 7 Nos 403 MARKET RATE

Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.

50 mm dia 15 mtrs 412 MARKET RATE

Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.

200 mm dia 35 mtrs 833 MARKET RATE

S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list. 1 Set 85000 MARKET RATE

In commer-1-01 number of 160A 4P Icu=100%Ics,0, LSIG MCCB with micro processor based release Electrical locking for normal & DG (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(HVAC & MEDICAL EQUIPEMENT)(200 KVA TRANSFORMER)

Busbar-1&2 04 numbers of 300Amps Aluminium busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing)

Out going- 06 numbers of 63A 4P MCB (make- Legrand or equivalent reputed make ISI marked)BDB P/AC,Rawpower)

Out going- 1 numbers of 125A 4P Icu=50%Ics, LSIG MCCB withTMR based release with adjustable overload (make- LEGRAND/Schneider/ABB/Siemens, ISI marked)(RAW POWER)

Out going- 06 numbers of 32A 4P MCB ((make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(LIGHT SUPPLY)

Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.

(ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data.

(iii) 4 nos of 65kA SP VSD WITH 32A SP MCB

Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALL Light of elegant look Panasonic/philips/wiproor equievalant reputed make & model A catogory, ISI marked as approved 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light model will be vide Panasonic / Philips/LT/WIPRO make or equievalant reputed make A catagory ISI marked as approved having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge. 6 Sets 3203 MARKET RATE

Supply of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 5 years 4 Nos 2504 MARKET RATE

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge. 100 Mtr 96 MARKET RATE

Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. 15 Mtr 1096 MARKET RATE

S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type MCB ENCLOSURE made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 20A TPN MCB 01 NOLegrand/Schneider/L&T/ABB or equievalant make & model as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 2 years of acceptance of materials 3 Set 2044 MARKET RATE

Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 100 mtrs 106 MARKET RATE

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge

In Ground Floor-20mm dia C-PVC pipe (Ashirbad/Supreme) 80 Mtr MARKET RATE

25mm dia C-PVC pipe (Ashirbad/Supreme) 90 Mtr 352 MARKET RATE

Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge

In Ground Floor-25mm dia PVC ASTM Pipe 50 Mtr 197.5 MARKET RATE

50mm dia PVC ASTM Pipe 60 Mtr 361.8 MARKET RATE

In Terrace Floor-50mm dia PVC ASTM Pipe 30 Mtr 395.9 MARKET RATE

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.

In Ground Floor 0.0 Each 65.3 MARKET RATE

Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.

In Ground Floor 0.0 Each 171.6 MARKET RATE

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge

In Ground Floor 35 Mtr 184.5 MARKET RATE

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge

In Ground Floor 25 Each 208.7 MARKET RATE

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge

15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) 5 Each 1182 MARKET RATE

15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) 12 Each 763.6 MARKET RATE

20mm dia CP consealed stop cock(Con-CHR083KN Jaquar make) 7 Each 1182 MARKET RATE

15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) 5 Each 1034.3 MARKET RATE

15mm dia CP Health faucet (Con-ALD-CHR-573 Jaquar make) 5 Each 1378.8 MARKET RATE

15mm dia CP extension piece 12 Each 109.3 MARKET RATE

15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) 7 Each 960.5 MARKET RATE

125mm dia C.P.gratings. 18 Each 132.1 MARKET RATE

15mm C.P.revolving shower with 15mm x 225mm long CP shower arm. 5 Each MARKET RATE

15mm CP spereader 0 Each 336.6

15mm dia CP Elbow action Bib cock(Jaquar)FLR-CHR-5047N 6 Each MARKET RATE

25mm dia brass Fullway valve 5 Each 975.2 MARKET RATE

32mm dia brass Fullway valve 5 Each 1404.4 MARKET RATE

40mm dia brass Fullway valve 5 Each 1770.8 MARKET RATE

50mm dia brass Fullway valve 3 Each 2600 MARKET RATE

25mm CPVC Ball valve 5 Each 336.2 MARKET RATE

Providing and fixing Urinal of Hindware of cat no- 60005 quality conforming to IS standards. 1 Each MARKET RATE

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge

10 litres PVC L.L. Cistern (Slimline-white) 5 Each 1629 MARKET RATE

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge

100mm dia U-PVC SWR pipes(Supreme/Ashirvad) 55 Mtr 366.1 MARKET RATE

75mm dia U-PVC SWR pipes(Supreme/Ashirvad) 30 Mtr 235.6 MARKET RATE

100mm dia U-PVC 'P' trap 15 Each 275 MARKET RATE

100mm dia U-PVC Door Tee 16 Each 187.2 MARKET RATE

100mm dia U-PVC Plain Bend 14 Each 122.3 MARKET RATE

100mm U-PVC Door Cross Tee 13 Each 368.4 MARKET RATE

75mm dia U-PVC Door Bend. 14 Each MARKET RATE

75mm dia U-PVC Plain Bend. 10 Each 99.4 MARKET RATE

75mm dia Nahin trap 18 Each 173.3 MARKET RATE

75mm dia Multi Floor Trap 12 Each 295.3 MARKET RATE

110x75mm dia Reducer 15 Each MARKET RATE

110mm dia Vent cowl. 10 Each 88.4 MARKET RATE

W/C connector 10 Each 513.6 MARKET RATE

PVC Clamp suitable for 75mm to 110mm dia pipe 20 Each 49.3 MARKET RATE

Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal all complete as per specification and direction of the Engineer in charge

Fixing 580mmx440mm size Orissa pan (Parryware/Hindware/Neycer/Rak) 2 Each 2247.1 MARKET RATE

Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.

E.W.C. with seat cover (Parryware/Hindware/Neycer/Rak) 4 Each 3715 MARKET RATE

EWC(Matrix set)No.70002(P-18) 1 Each MARKET RATE

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge

550mm x 400mm size W. H. Basin with Half Pedestal (Parryware/Hindware/Somany) 7 Each 4092.8 MARKET RATE

Under Counter basin(Hindware)No.10095. 7 Each 4068.4 MARKET RATE

Half pedestal Basin(Hindware)No.91049+91115 Each 7717.1

Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge

Fixing 600mmx450mm size B.E mirror (fixed type) 6 Each MARKET RATE

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

600 x 125mm plate glass shelf with CP guard rails 8 Each 589.6 MARKET RATE

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

25mm x 600mm long CP towel rail 5 Each 692.3 MARKET RATE

CP towel rail Ring. 18 Each 459.4

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

CP soap holder 18 Each 173.2 MARKET RATE

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge

600x450x250 mm Porceloain sink(Hindware/Neycer) 6 Each MARKET RATE

Make-Aquaguard/Usha/Water Odisha 1 Each 30000 MARKET RATE

Supplying & Providing Over Head Water Tank 10,000 Litre (Syntex) 3000 Ltr. 8.5 MARKET RATE

Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge

Gully trap chamber of size 250mmx250mm with R.C.C cover slab 4 Each 1573 MARKET RATE

Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

Inspection chamber Inside size 760mmx760mmx460mm 4 Each 8055.7 MARKET RATE

1 H.P three phase 15 stage head range 20 to 35 metres, discharge 145 to 110 L.M.P with outlet dia of 25mm (Horizontal) 4 Each 13775.6 MARKET RATE

DOL Control panel 4 Each 3805.5 MARKET RATE

2.50sqmm flat cable 200 Mtr 128.1 MARKET RATE

2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm 1 Each MARKET RATE

DOL controll pannel 1 Each 3805.5 MARKET RATE

2.50sqmm cable 70 Mtr 128.1 MARKET RATE

32mm dia steel short piece 1 Each MARKET RATE

Steel rope with cover 60 Mtr 26.7 MARKET RATE

Well cap 1 Each MARKET RATE

50mm size CI bracket 1 Each 91.3 MARKET RATE

20mm dia rigid UPVC pipes 70 Mtr 6.9 MARKET RATE

Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.

-do- with Ist disintegrated rockadditional depth of 1.50 m over the initial lead and lift

Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge

In ground floor cum 425.1 OSR

Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.

In ground floor cum 4648 OSR

Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

In ground floor cum 6707 OSR

Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

In ground floor 2 Qntl 9910 OSR

Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge

2 Each 344.6 OSR

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.

8 Each 193.4 OSR

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. Make: StopFire / Cease Fire / Kanex. Nos 10 MARKET RATE

Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.

Floor indentification signage ( ie, GROUND FLOOR, FIRST FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting colour from back ground.Size shall be 15cm x 60cm. Nos 15 MARKET RATE

Providing and fixing the signages "Fire Exit, Fire Exit Arrow Down,Fire Exit Arrow Left,Fire Exit Arrow Right" of 1.5in height letters in white with green back ground.The size of the board shall be 25cm x 15 cm and shall be fixed at the height of 2 mts Nos 15 MARKET RATE

Total- (A+B+C+D+E)

CONSTRUCTION OF PRIMARY HEALTH CENTER AT KALIMATI, JODA BLOCK ,IN THE DISTRICT OF KEONJHAR,ODISHA

Sl No. No. Length Breadth Height Qnty Unit

0.0 SITE CLEARANCE 1 SQM

0.0 EARTH EXCAVATION

PERIPHERI WALL 1 CUM

ENTRY STEP FRONT 1 0.3 CUM

STEP(BACK SIDE) 1 0.3 CUM

FOR RAMP FRONT(SIDE WALL) 1 0.45 CUM

TOTAL EXCAVATION CUM

0.0 SAND FILLING

PERIPHERI WALL 0.15 CUM 8

ENTRY STEP FRONT 1 0.1 CUM

STEP(BACK SIDE) 1 0.1 CUM

FOR RAMP FRONT(SIDE WALL) 1 0.1 CUM

TOTAL SAND FILLING CUM

PERIPHERI WALL 0.1 CUM

ENTRY STEP FRONT 1 0.1 CUM

STEP(BACK SIDE) 1 0.1 CUM

FOR RAMP FRONT(SIDE WALL) 1 0.1 CUM

Ramp 1 0.15 CUM

0.0 BACK FILLING

1/3 RD OF EXCAVATED EARTH = CUM

Column up to plinth

iii) PLINTH BEAM

HORIZONAL&VERTICAL

GROUND FLOOR 1 0.125 CUM

Head room 1 0.125 CUM

Ground floor W 13 0.45 SQM

Head room 1 0.45 SQM

viii) Staicase 1

waist slab 2 0.000;[Re1]0.000 0.125 CUM

landing Beam 1 CUM

0.0 Reinforcement

Footing cum @ kg

Pedestal cum @ kg

plinth Beam cum @ kg

Column cum @ kg

Roof Beam cum @ kg

Roof Slab cum @ kg

Lintel cum @ kg

Staircase cum @ kg

Column cum @ kg

Roof Beam cum @ kg

Roof Slab cum @ kg

Lintel cum @ kg

0.0;[Re7]0.0 Brick Masonary (1:6) Sub Structure PERIPHERI WALL

PERIPHERI WALL 0.5 CUM

PERIPHERI WALL 1 0.375 CUM

PERIPHERI WALL 1 0.25 CUM

RAMP 1 0.00;[Re5]0.00 0.25 CUM

ENTRY STEPS 1 CUM

ENTRY STEPS(BACK SIDE) 1 CUM

0.0;[Re8]0.0 Brick Masonary (1:6) Superstructure

250MM WALL 1 0.25 CUM

Deduction for door and window

Main Entry Door -1 CUM

Opening near toilet block -1 CUM

Opening near medical officer 1& 2 -2 CUM

Head room 2 CUM

Deduction for door and window

0;[Re9]0 Fly Ash Brick Masonary (1:4) Halfbrick Superstructure

125MM WALL 1 0.125 CUM

0;[Re10]0 12mm Plastering in c.m.(1:6) outside wall

OUTER WALL 1 SQM

column 1 0.999;[Re1]0.999 SQM

Deduction for door and window

entrance -1 2.625 SQM

Head room 2 0.999;[Re1]0.999 SQM

Deduction for door and window

0;[Re11]0 16mm Plastering in c.m.(1:6) inside wall

Health & Wellness Hall 2 SQM

I.L.R. Point 2 SQM

Staircase 2 SQM

Toilet Block 2 SQM

Room near toilet block 1 SQM

House keeping 2 SQM

Dressing/injection 2 SQM

Medical officer -2 2 SQM

Medical officer -1 2 SQM

10' Wide Passage 2 SQM

Entrance Lobby 1 SQM

Med store 2 SQM

GEN Store 2 SQM

door window,ventilator edge

Opening at entry steps 1 0.25 SQM

Dispensing counter 1 0.25 SQM

Opening near toilet block 1 0.25 SQM

Opening near medical officer 1& 2 2 0.25 SQM

Deduction for door and window

Opening at entry steps -1 2.1 SQM

FG -14 1.35 SQM

Dispensing counter -1 1.2 SQM

Opening near toilet block -2 2.1 SQM

Opening near medical officer 1& 2 -4 2.1 SQM

door window,ventilator edge

Deduction for door and window

0;[Re12]0 6mm Plastering in c.m.(1:4)

Health & Wellness Hall 1 SQM

I.L.R. Point 1 SQM

Room near toilet block 1 SQM

Toilet Block 1 SQM

House keeping 1 SQM

Dressing/injection 1 SQM

Medical officer -2 1 SQM

Medical officer -1 1 SQM

10' Wide Passage 1 SQM

Entrance Lobby 1 SQM

Med store 1 SQM

GEN Store 1 SQM

Portico 1 0.999;[Re3]0.999 SQM

head room 1 SQM

0;[Re13]0 Grading plaster

Ground Floor 1 SQM

head room 1 SQM

0;[Re14]0 Vitrified tiles flooring

Health & Wellness Hall 1 SQM

I.L.R. Point 1 SQM

Path Lab 1 0.999;[Re4]0.999 3 SQM

Room near toilet block 1 SQM

House keeping 1 SQM

Dressing/injection 1 SQM

Medical officer -2 1 SQM

front area of wc 1 SQM

Medical officer -1 1 SQM

3000mm Wide Passage 1 SQM

Entrance Lobby 1 SQM

Med store 1 SQM

GEN Store 1 SQM

0;[Re15]0 Ceramic tiles Skirting

Health & Wellness Hall 2 1.8 SQM

I.L.R. Point 2 1.8 SQM

Day care 1 1.8 SQM

Staircase 1 2 1.8 SQM

Path Lab 2 1.8 SQM

Room near toilet block 1 1.8 SQM

House keeping 2 1.8 SQM

Dressing/injection 2 1.8 SQM

Medical officer -2 2 1.8 SQM

front area of wc 2 1.8 SQM

Medical officer -1 2 1.8 SQM

3000mm Wide Passage 2 1.8 SQM

Entrance Lobby 1 1.8 SQM

Entrance 2 1.8 SQM

D.D.C 2 1.8 SQM

Med store 2 1.8 SQM

GEN Store 2 1.8 SQM

Deduction for door and window

Opening at entry steps -1 1.8 SQM

Opening near toilet block -2 1.8 SQM

Opening near medical officer 1& 2 -4 1.8 SQM

0;[Re16]0 Ceramic Tile Flooring

W.C. (medical officer) 1 SQM

0;[Re17]0 Ceramic Glazed Dado-

Toilet 2 2.1 SQM

W.C. (medical officer) 2 2.1 SQM

Deduction for door and window

0;[Re18]0 Granite slab

Entry step(Front) 4 0.25 SQM

Verandah 1 1.2 SQM

step(Back side) 5 0.25 SQM

Staircase 1 steps 18 0.25 SQM

Landing 1 1.2 SQM

Dispencing counter 1 0.000;[Re30]0.000 SQM

Entry step (Front) 5 0.15 SQM

step (Back side) 6 0.15 SQM

Riser 20 0.15 SQM

0;[Re19]0 80 mm PAVER BLOCK M40

At portico 1 0.000;[Re1]0.000 SQM

0;[Re20]0 Pressed Steel Door

0;[Re21]0 UPVC DOOR 1 2.1 SQM

0;[Re22]0 UPVC WINDOW

0;[Re23]0 UPVC window at staircase

0;[Re24]0 FRP DOOR FOR TOILET

Ground Floor 6 2.1 SQM

0;[Re25]0 VENTILATOR-UPVC

0;[Re26]0 M.S. Grill

Assume 25 kg per sqm KG

MS DOOR HEAD ROOM 1 0.000;[Re31]0.000 2.1 SQM

Assume 35 kg per sqm KG

0;[Re27]0 Synthetic Enamel Paint (50% FOR BOTH SIDES)

MS DOOR HEAD ROOM 1 0.000;[Re31]0.000 2.1 SQM

0;[Re28]0 Putty

Ground Floor = SQM

First Floor = SQM

0;[Re29]0 Plastic paint over one coat primer

Ground Floor = SQM

First Floor = SQM

0;[Re30]0 Weather coat

Ground Floor = SQM

First Floor = SQM

0;[Re31]0 Railing

Staircase 1 10 RMT

0;[Re1]0 EARTH FILLING

A BRICK WORK 1 35 CUM

C DOOR WINDOWS 3 2.1 SQM

SITE DEVELOPMENT

A PAVER AREA 1 SQM

B P.C.C 45 0.15 CUM

C KERB STONE 1 CUM

D Synthetic Enamel Paint 25 SQM

GENERAL ABSTRACT OF INTERNAL & EXTERNAL ELECTRICAL WORKS CONSTRUCTION OF PHC

S. No. Description Amount

1 INTERNAL ELECTRICAL WORKS

A INTERNAL ELECTRICAL Rs.

B EXTERNAL STREET LIGHT SYSTEM Rs.

TOTAL ELETRICAL Rs.

DETAIL ESTIMATE OF INTERNAL & EXTERNAL ELECTRIFICATION AND ALLIED WORKS FOR CONSTRUCTION OF CONSTRUCTION OF PHC

ITEM CODE SL No Item Details Qty Unit Rate Amount

OSR-2018 A Sub-Head I (modular Wiring Items)

1.1 MODULAR 1 Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make-Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FALLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.

1.1.1 M a) GROUP-A 40 Nos 555

1.1.2 M a-1) GROUP-B 30 Nos 791

1.1.3M a-2) GROUP-C 30 Nos 1088

MARKET RATE+osr b) Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type((anti bactorial & falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 12 Nos 1027

MARKET RATE+osr c) Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 20 Nos 193

MARKET RATE+osr d) Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant make & model ISI marked as approved , complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 26 Nos 508

MARKET RATE+osr e) Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make A catagory ISI marked as approved, (For equipement power)All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 25 Nos 645 1.19.2 k) 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.(LDB to LSB/LIGHT CKT) in existing conduit 155 Mtr 43 1.19.2 k) 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.(LDB to LSB/LIGHT CKT) in existing conduit 155 Mtr 43 1.19.2 k) 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.(LDB to LSB/LIGHT CKT) in existing conduit

MARKET RATE+osr f) Supplying,fixing of 2x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+2 no 6A switch & socket(modular type) ( (anti bactorial & falme retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 4 Nos 1381

MARKET RATE+osr g) Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch & socket(modular type) ( (anti bactorial & falme retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. 2 Nos 1969

OSR 2 Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

1.18.1 a) 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) 200 Mtr 131

1.8.2 b) 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5) 180 Mtr 145

1.8.8 c) 4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5) 175 Mtr 263

1.8.3 d) 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR POINT/DG PANEL ESSENTIAL LOAD) (2X4+1X1.5) 220 Mtr 163

2.12 Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens/panasonic or equievalant reputed make & model A catagory ISI marked as approved,All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 5 Nos 616

MARKET RATE 4 Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed plug top along with 32 amps. C-series, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Equievalant higher model of Make-Legrand/Schneider/Siemens/panasonic equievalant reputed make & model A catagory ISI marked as approved.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 4 Nos 4346

MARKET RATE 5 Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side)(anti bactorial type) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

MARKET RATE a) 4 moudle(125mmx75mm) 4 Nos 267

MARKET RATE b) 1 moudle(75mmx75mm) 4 Nos 220

MARKET RATE c) 12 moudle(200mmx150mm) 4 Nos 482

MARKET RATE 6 Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor or equievalant reputed make A catagory ISI marked as approved

MARKET RATE 7 Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 10 Nos 107

MARKET RATE 8 Supplying and installation of AC starter Modular type, Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 2 Nos 619

MARKET RATE 9 Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 1 Nos 205

OSR+MKT 15 S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 10 EACH 61

MARKET RATE+osr 16 Supplying,fixing of Blanking plate(modular type)( (anti bactorial & flame retradant type)) in existing switch box(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision), complete suitable for IPH standard hospital.It should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 10 Nos 42

B Sub-Head II (Light fitting Fixture & Fan)

MARKET RATE 1 Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years. 6 Nos 3122

MARKET RATE 2 Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years. 3 Nos 3673

MARKET RATE 3 Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) as required as per direction of Engg.-in-Charge.Replacement Warranty will be 5 years. 8 Nos 2210

MARKET RATE 4 Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Ushaor equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator) 22 Nos 2123

MARKET RATE 5 Supplying and fixing of Energy efficient Recess mounted LED luminaire made up of CRCA powder coated sheet steel housing of 595 X 595 mm x 70 mm size with of not more than 25W and system lumens output not less than 3250 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Trilux /Philips/Wipro or equievalant reputed make & model A catagory ISI marked as approved.) . The luminaire must be Replacement Warranty will be 5 years. 6 No 2677

MARKET RATE 6 Supplying and fixing of Energy efficient surface mounted square shape 20 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. ( Make : Panasonic /Trilux/Osram/PHILIPS/Wipro or equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years 35 Nos 1518

MARKET RATE 7 Supplying and fixing of Energy efficient recess mounted LED luminaire with white powder coated ,pressure die-cast Al housing ,with high transmititivity,non-yellowing PMMA diffuser, with wattage not more than 20 watt and lumen output not less than 2600 Lumen ( 130 lumens/watt ) of size 595 x595 x 70 mm , ,CRI not less than 80,CCT of 5700-6500 degree K,THD less than 10%, with Non integrated isolated driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation), all other accessories , life : 50,000 burning hours (5 years warranty) , Internal surge protection of 3 KV suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. ( Make : Panasonic / LT /Wipro/PHILIPS or equievalant reputed make & model A catagory ISI marked as approved.) The luminaire should be Replacement Warranty will be 5 years. 4 Nos 2428

MARKET RATE 8 SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Similar to Panasonic/PHILIPS/LT/wipro or equievalant reputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years . 35 Nos 797

MARKET RATE 9 SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. ( Make : WIPRO / PHILIPS/Panasonic or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years 6 Nos 732

MARKET RATE 10 Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved. 8 Nos 33

c) BDBS,DB,AC DB,FLOOR PANELS,MCBS

OSR 1 Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 5 years

2.5.5 a) 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 2 years. 2 Nos 2168

2.3.7 b) Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITH CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD ) 2 Nos 1906

2.4 c) 2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD) 2 Nos 1633

2.5.3 d) 8 Way(8+24) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) 2 Nos 2702

2.7.2 2 Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years .MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years. 2 Nos 333

2.7.1 3 Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years. 50 Nos 132

2.11.2 4 Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .(4W TPN BDB IC)AC ODU CONTROLLER). The RCCB should be Replacement Warranty will be 5 years 2 Nos 2246

2.10.1 5 Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years 2 Nos 1688

2.10.2 6 Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years 2 Nos 1926

2.10.3 7 Supplying and fixing 63Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The RCCB should be Replacement Warranty will be 5 years 2 Nos 2220

2.11.3 8 Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.(for power BDB & AC ODU, 8 way TPN BDB IC).The RCCB should be Replacement Warranty will be 5 years 2 Nos 2641

d) (Earthing) INSTALLATION

MARKET RATE 1 S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 5 years 2 Nos 13897

3.7 Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. 20 Mtr 96

3.15 Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. 14 Mtr 1096

MARKET RATE 4 Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge. 1 Mtr 2710

e) CABLING AND END TERMINATION MAIN AREA

OSR 1 Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

OSR b) 4 core x 4 sq mm (for small power) 19 Mtr 87.87

25 c) 3.5core x 35 sq mm (To MDB) 62 Mtr 218.41

28 d) 3.5core x 95 sq mm ( FOR main panel light & power supply) 122 Mtr 475.31

2 LAYING OF CABLE

5.2.1 2.1 Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. 12 Mtr 130

5.2.2 2.2 Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. 102 Mtr 145

5.3.1 2.3 Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge. 16 Mtr 42

5.3.2 2.4 Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge. 18 Mtr 58

5.4.1 2.5 Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge. 16 Mtr 46

5.4.2 2.6 Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge. 20 Mtr 46

5.5.1 2.7 Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. 26 Mtr 81

5.5.3 2.8 Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. 8 Mtr 131

3 Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.

5.8..32 a) 4 core x16sq mm 7 Nos 196

5.8.21 b) 3.5 core x35 sq mm 7 Nos 331

5.8.24 c) 3.5 core x95 sq mm 7 Nos 403

MARKET RATE 4 Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.

MARKET RATE a) 50 mm dia 15 mtrs 412

MARKET RATE 5 Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.

MARKET RATE a) 200 mm dia 35 mtrs 833

MAIN CONTROL PANEL AT GF

MARKET RATE 1 S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list. 1 Set 85000

In commer-1-01 number of 160A 4P Icu=100%Ics,0, LSIG MCCB with micro processor based release Electrical locking for normal & DG (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(HVAC & MEDICAL EQUIPEMENT)(200 KVA TRANSFORMER)

Busbar-1&2 04 numbers of 300Amps Aluminium busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing)

Out going- 06 numbers of 63A 4P MCB (make- Legrand or equivalent reputed make ISI marked)BDB P/AC,Rawpower)

Out going- 1 numbers of 125A 4P Icu=50%Ics, LSIG MCCB withTMR based release with adjustable overload (make- LEGRAND/Schneider/ABB/Siemens, ISI marked)(RAW POWER)

Out going- 06 numbers of 32A 4P MCB ((make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(LIGHT SUPPLY)

Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.

(ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data.

(iii) 4 nos of 65kA SP VSD WITH 32A SP MCB

TOTAL INTERNAL ELECTRICAL AMOUNT(A-J)

(K)DETAIL ELECTRICAL ESTIMATE FOR PROVIDING STREET LIGHT SYSTEM FOR CONSTRUCTION OF PHC

LIGHT SYSTEM QTY. UNIT RATE AMOUNT

1 Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALL Light of elegant look Panasonic/philips/wiproor equievalant reputed make & model A catogory, ISI marked as approved 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light model will be vide Panasonic / Philips/LT/WIPRO make or equievalant reputed make A catagory ISI marked as approved having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge. 6 Sets 3203

2 Supply of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 5 years 4 Nos 2504

3 Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge. 100 Mtr 96

4 Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. 15 Mtr 1096

5 S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type MCB ENCLOSURE made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 20A TPN MCB 01 NOLegrand/Schneider/L&T/ABB or equievalant make & model as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 2 years of acceptance of materials 3 Set 2044

6 Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 100 mtrs 106

Name of the Work :- CONSTRUCTION OF PHC

INTERNAL & EXTERNAL PH WORKS

Estimate for the Work :- CONSTRUCTION OF PHC(PH Works)

Sl No Description Quantity Unit Rate Amount

Internal PH works

1 Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge

In Ground Floor-20mm dia C-PVC pipe (Ashirbad/Supreme) 80 Mtr

25mm dia C-PVC pipe (Ashirbad/Supreme) 90 Mtr 352

Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge

In Ground Floor-25mm dia PVC ASTM Pipe 50 Mtr 197.5

50mm dia PVC ASTM Pipe 60 Mtr 361.8

In Terrace Floor-50mm dia PVC ASTM Pipe 30 Mtr 395.9

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.

In Ground Floor 0.0 Each 65.3

Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.

In Ground Floor 0.0 Each 171.6

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge

In Ground Floor 35 Mtr 184.5

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge

250mm to 375mm thick wall

In Ground Floor 25 Each 208.7

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge

15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) 5 Each 1182

15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) 12 Each 763.6

20mm dia CP consealed stop cock(Con-CHR083KN Jaquar make) 7 Each 1182

15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) 5 Each 1034.3

15mm dia CP Health faucet (Con-ALD-CHR-573 Jaquar make) 5 Each 1378.8

15mm dia CP extension piece 12 Each 109.3

15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) 7 Each 960.5

125mm dia C.P.gratings. 18 Each 132.1

15mm C.P.revolving shower with 15mm x 225mm long CP shower arm. 5 Each

15mm CP spereader 0 Each 336.6

15mm dia CP Elbow action Bib cock(Jaquar)FLR-CHR-5047N 6 Each

25mm dia brass Fullway valve 5 Each 975.2

32mm dia brass Fullway valve 5 Each 1404.4

40mm dia brass Fullway valve 5 Each 1770.8

50mm dia brass Fullway valve 3 Each 2600

25mm CPVC Ball valve 5 Each 336.2

Providing and fixing Urinal of Hindware of cat no- 60005 quality conforming to IS standards. 1 Each

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge

10 litres PVC L.L. Cistern (Slimline-white) 5 Each 1629

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge

100mm dia U-PVC SWR pipes(Supreme/Ashirvad) 55 Mtr 366.1

75mm dia U-PVC SWR pipes(Supreme/Ashirvad) 30 Mtr 235.6

100mm dia U-PVC 'P' trap 15 Each 275

100mm dia U-PVC Door Tee 16 Each 187.2

100mm dia U-PVC Plain Bend 14 Each 122.3

100mm U-PVC Door Cross Tee 13 Each 368.4

75mm dia U-PVC Door Bend. 14 Each

75mm dia U-PVC Plain Bend. 10 Each 99.4

75mm dia Nahin trap 18 Each 173.3

75mm dia Multi Floor Trap 12 Each 295.3

110x75mm dia Reducer 15 Each

110mm dia Vent cowl. 10 Each 88.4

W/C connector 10 Each 513.6

PVC Clamp suitable for 75mm to 110mm dia pipe 20 Each 49.3

Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal all complete as per specification and direction of the Engineer in charge

Fixing 580mmx440mm size Orissa pan (Parryware/Hindware/Neycer/Rak) 2 Each 2247.1

Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.

E.W.C. with seat cover (Parryware/Hindware/Neycer/Rak) 4 Each 3715

EWC(Matrix set)No.70002(P-18) 1 Each

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge

550mm x 400mm size W. H. Basin with Half Pedestal (Parryware/Hindware/Somany) 7 Each 4092.8

Under Counter basin(Hindware)No.10095. 7 Each 4068.4

Half pedestal Basin(Hindware)No.91049+91115 Each 7717.1

Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge

Fixing 600mmx450mm size B.E mirror (fixed type) 6 Each

Design mirror(Parryware) 0 Each 1548.8

Large size mirror with frame

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

600 x 125mm plate glass shelf with CP guard rails 8 Each 589.6

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

25mm x 600mm long CP towel rail 5 Each 692.3

CP towel rail Ring. 18 Each 459.4

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

CP soap holder 18 Each 173.2

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge

600x450x250 mm Porceloain sink(Hindware/Neycer) 6 Each

Make-Aquaguard/Usha/Water Odisha 1 Each 30000

Supplying & Providing Over Head Water Tank 10,000 Litre (Syntex) 3000 Ltr. 8.5

Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge

Gully trap chamber of size 250mmx250mm with R.C.C cover slab 4 Each 1573

Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

Inspection chamber Inside size 760mmx760mmx460mm 4 Each 8055.7

External PH Works

1 H.P three phase 15 stage head range 20 to 35 metres, discharge 145 to 110 L.M.P with outlet dia of 25mm (Horizontal) 4 Each 13775.6

DOL Control panel 4 Each 3805.5

2.50sqmm flat cable 200 Mtr 128.1

For Production well.

2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm 1 Each

DOL controll pannel 1 Each 3805.5

2.50sqmm cable 70 Mtr 128.1

32mm dia steel short piece 1 Each

Steel rope with cover 60 Mtr 26.7

Well cap 1 Each

50mm size CI bracket 1 Each 91.3

20mm dia rigid UPVC pipes 70 Mtr 6.9

Construction 50 users RCC Septic tank-1 No.

Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.

-do- with Ist disintegrated rockadditional depth of 1.50 m over the initial lead and lift

Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge

In ground floor cum 425.1

Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.

In ground floor cum 4648

Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

In ground floor cum 6707

Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

In ground floor 2 Qntl 9910

Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.

Base slab-1x5.40x3.85x1.50= Cum 220

-do- with Ist disintegrated rockadditional depth of 1.50 m over the initial lead and lift 0

Base slab-1x5.40x3.85x0.85= Cum 224

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer in charge. 0

Below raft slab -1x5.80x3.55x0.15= Cum 425.1

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 0

Below raft slab -1x5.80x3.55x0.10= Cum 0

Disposal of surplus excavated materials by mkechanical means from the work side etc.complete upto 5 Km.lead. 0

Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 0

Base raft-5.10x3.55x0.30= 0

Pump slab-1x5.30x0.90x0.15= 0

Pump house wall-10.00x0.2x1.80= 0

Pump room slab-5.45x3.25x0.10= 0

RCC Lintel-1x1.80x0.20x0.15= 0

RCC chajja-1x1.80x0.45x0.075= 0

Landing slab-1x3.55x3.20x0.10= 0

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 0

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 0

Base raft-1x5.10x0.30= 0

Roof slab,chajja 0

Ramp-1x6.20x0.90= 0

Chajja-1x1.80x0.53= 0

Long slab-1x3.00x3.00= 0

RCC Lintel-1x1.50x0.25= 0

Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 0

Superstructure-1x10.00x0.25x2.10= Cum 0

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 0

Inside-1x8.40x2.30= 0

Outside-1x10.00x2.30= 0

Deduction:-1x1.50x2.10= 0

Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 0

Roof slab-1x5.00x3.00= 0

RCC wall-2x10.00x1.80= 0

Landing-1x3.00x3.00= 0

Raft-1x3.00x0.90= 0

Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer all complete as per specification and direction of the Engineer in charge 0

Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. 0

Supplying all materials, labour, T&P and wall painting 2 coat with plastic emulsion paint of approved shade on old work to give an even shade etc all complete as per specification and direction of the Engineer in charge 0

Supplying all materials, labour, T&P and providing painting 2 coat with any weather coat on new wood work all complete as per specification and direction of the Engineer in charge 0

Supplying and fixing of M.S.window grill made out of MS flat conforming to IS:2062/2006 painted with Red oide primer as per the design approve by EIC including cost,conveyance of all materials and labour for fitting fixing etc.all complete as per the direction of the Engineer-in-charge. 0

Riser-8x0.90x0.25= 0

Tread-7x0.90x0.25= 0

Weight @20kg/sqm Kg 0

Fixing of MS Joist for Movement of chain pully L.S. 100 kg 0

Supplying all materials, labour, T&P and providing painting 2 coat with any approved synthetic endamel paint to new wood & iron work all complete as per specification and direction of the Engineer in charge 0

Riser-8x0.90x0.25= 0

Tread-7x0.90x0.25= 0

Take 0.5 times of total qty.7.88x0.50= Sqm 130.5

Supplying all materials, labour,T&P and providing 25mm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 0

Open terrace-1x5.00x3.00= Sqm 292.8

Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and lalustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge. 0

For ladder-1x3.50= 0

For Ramp-1x4.25= 0

[email protected]/Rmt(34.16kg/3.26Rmt)(mailto:[email protected]/Rmt(34.16kg/3.26Rmt)塹ᴻ䡿ⲯ嶂藄挧ꮥ) 81.2 Kg 335

Estimate for the Work :- CONSTRUCTION OF PHC

Sl No Item Description Total Amount (Excluding GST)

Sl. No Description Unit Quantity Rate Amount

A EXTINGUISHER SYSTEM

1 Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. Make: StopFire / Cease Fire / Kanex. Nos 10

B FIRE SIGNAGES SYSTEM .

0.0_) Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.

0.0_) Floor indentification signage ( ie, GROUND FLOOR, FIRST FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting colour from back ground.Size shall be 15cm x 60cm. Nos 15

0.0_) Providing and fixing the signages "Fire Exit, Fire Exit Arrow Down,Fire Exit Arrow Left,Fire Exit Arrow Right" of 1.5in height letters in white with green back ground.The size of the board shall be 25cm x 15 cm and shall be fixed at the height of 2 mts Nos 15

Total- (A+B+C+D+E)

Steel Rate (SAIL)

Sl No. Size of TMT BAR Length in Mtr Coefficient in K.G. Total Wt.in KG Rate/ Piece Rate /Qtl

Av Rate Including GST @ 18%

Av Rate Excluding GST @ 18%

Black-smith 2nd class Rs 562 / day

Man Mulia Rs 462 / day

Women Mulia Rs 462 / day

Mason 2nd class Rs 562 / day

Mason Special class Rs 612 / day

Black-smith special Rs 612 / day

Semi-skilled Mulia Rs 512 / day

skilled Mulia Rs 562 / day

Carpenter (2nd class) Rs 562 / day

Carpenter (1st class) Rs 612 / day

Painter Special Rs 612 / day

Painter 2nd class Rs 562 / day

Gharmi or Thacher Rs 462 / day

Fitter (special) Rs 612 / day

Helper Rs 462 / day

Fitter 2nd class Rs 562 / day

Non-sal wood scatelling Rs 58374.79 / cum 79

75mm to120mm sal bullah Rs 51.87 / RM 59

75mm to 120mm dia Non sal bullah Rs 41.81 / RM 69

150mm dia bullah Rs 124.26 / RM 60

carriage of wood Rs 247.87 / 1.25cum

Battens Rs 53035.75 / cum 73

80mm dia bullah Rs 30.81 / RM 67

Marble chips 4 mm to 7 mm size Rs 673.93 / Qtl 129

Marble powder Rs 394.2 / Qtl 130

White cement Rs 2017.18 / Qtl 132

Glass/ Alumunium Stips Rs 6 / Rm

Red oxide primer Rs / kg 101

Wood Primer Rs 0.0 / Lt 102

Red oxide powder Rs 123.94 / kg 108

Wall cement primer Rs 159.03 / Lt 155

Emamel paint Rs 205.34 / Lt 105

Weather coat (I.S.I) Rs 194.79 / Lt 157

Coaltar Rs 49.21 / kg 112

Cost of french polish Rs 172.9 / Lt 109

Cost of cement paint Rs 47.83 / kg 107

Cost of plastic emulsion paint Rs 243 / Lt 104

Cost of Distemper Rs / kg 106

Cost of plaster parish Rs 17.23 / kg 111

Shell lime unslacked Rs 24.19 / kg 23

Stone lime unslacked Rs 21.88 / kg 21

Non- sal wood reapers 5cmx2.5cm Rs 13268.45 / cum 80

5cm long reaper nails Rs 79.56 / kg 120

Add cost of A.C.sheet (plain) Rs 246.55 / sqm 116

A.C.sheet Rs 209.1 / sqm 114

AC Ridges Rs 207.69 / sqm 115

GCI Sheet Rs 333.12 / sqm 113

Sal wood Battens Rs 53035.75 / cum 73

5cm long wood scews Rs 66 / 100nos.

Sal wood scantling sawn Rs / cum 73

Sal wood scantling sawn Rs 63839 / cum 74

Piasal wood planks shutters Rs 74369.67 / cum 77

sal wood planks shutters Rs / cum 76

Wooden hinged cleats Rs 19 / Each

Binding wires Rs 90.1 / kg 125

Ceramic floor tiles Rs 450.08 / sqm 98

Ceramic wall tiles Rs 405.2 / sqm 98

Kodappa tiles Rs 372.8 / sqm 96

Kota tiles Rs 500.2 / sqm 93

Vetrified floor tiles Rs 695.76 / sqm 98

Chequred tiles Rs 254.75 / sqm 99

Granite tiles Rs 2098.83 / sqm 95

Marble Rs 766.45 / sqm 92

Vitrified Industrial tiles Rs 578.35 / sqm 98

STEEL REQD./CFT inkg

A)R.C.C. RAFT 1.5

B) COLUMN BASE 3

C) PLINTH BAND 1.5

D) COLUMN / BEAM 5

E) ROOF SLAB 2.5

F) STAIRE CASE 3.75

Sl. No. Name of materials Name of Quarry Lead in k.m. Basic rate Carriage Royalty DMF @ 10% EMF @ 5% Addl. Charges. Royalty+ DMF+ EMF+ Additional charges Total of Carrige & Royalty G.Total cost Unit

1 B.H.G. Stone Boulder BHALIPAHADI 55 Rs. 270 Rs. Rs. 130 533 Rs. Rs. Cum 50

2 B.H.G. Stone Metal 4cm. (1 1/2") size BHALIPAHADI Rs. 995.25 Rs. Rs. 130 Rs. Rs. Cum 31

3 B.H.G. Stone Metal 2.65cm. size BHALIPAHADI Rs. 1097.74 Rs. Rs. 130 Rs. Rs. Cum 32

4 B.H.G. Stone Metal 22.4cm. size BHALIPAHADI Rs. 1123.78 Rs. Rs. 130 Rs. Rs. Cum 34

5 B.H.G. Stone Metal 2.0cm. size BHALIPAHADI Rs. 1335 Rs. Rs. 130 Rs. Rs. Cum 35

6 12mm (1/2") size b.h.g. c.b. Chips BHALIPAHADI Rs. 1370 Rs. Rs. 130 Rs. Rs. Cum 37

7 10mm size b.h.g. c.b. Chips BHALIPAHADI Rs. 1418.67 Rs. Rs. 130 Rs. Rs. Cum 39

8 6.7mm (1/4") size b.h.g. c.b. chips BHALIPAHADI Rs. 930 Rs. Rs. 130 Rs. Rs. Cum 39

9 4.7mm size b.h.g. c.b. chips BHALIPAHADI Rs. 850.2 Rs. Rs. 130 Rs. Rs. Cum 40

10 2.36mm size b.h.g. c.b. chips BHALIPAHADI Rs. 805.85 Rs. Rs. 130 Rs. Rs. Cum 39

11 Crusher dust (2.36mm -75Mic) BHALIPAHADI Rs. Rs. Rs. 35 Rs. Rs. Cum 16

12 Fly Ash Bricks Local 10 Rs. 5142.55 Rs. Rs. Rs. Rs. 1000 Nos. 3

14 Sand for Filling RAJABASA 75 Rs. 55 Rs. Rs. 35 205 Rs. Rs. Cum 18

15 Sand for Mortar RAJABASA Rs. 65 Rs. Rs. 35 Rs. Rs. Cum 19

16 Cement Local 10 Rs. 602 Rs. Rs. Rs. Rs. Qntl.

17 Steel Fe-500 Local 10 Rs. Rs. Rs. Rs. Rs. Qntl.

18 All kinds of tiles Local 10 Rs. Rs. Rs. Rs. Rs. 1 Sqm

19 Paver Block 80mm Local 10 Rs. 608.4 Rs. Rs. Rs. Rs. 1 Sqm

20 Moorum Local Rs. 58 Rs. Rs. 35 Rs. Rs. Cum 15

Certified that the lead provided in the statement is correct and minimum to the best of my knowledge.

ANALYSIS OF RATES

1a) R.Cement concrete (M-20) with 20mm

down graded b.h.g.c.b. chips including cost,

conveyance,royality,taxes,watering

and curing etc. complete.

A/R P-50 ITEM-5

DATA FOR 15 CUM

Mate 0.86 Nos. Each Rs

Man Mulia 20 Nos. Each Rs

Mason 2nd class 1.5 Nos. Each Rs

20mm size chips 8.1 cum cum Rs

10mm size chips 5.4 cum cum Rs

Sand 6.75 cum cum Rs

Cement 52.1 Qtl. Qtl. Rs

Concrete mixture 6 hrs hrs 229.55

Generator 6 hrs hrs 700

Over head charge & Contractor's Profit 15%

TOTAL LABOUR & MATERIAL

CARRIAGE & ROYALITY OF MATERIAL

20mm size chips 8.1 cum cum Rs

10mm size chips 5.4 cum cum Rs

Sand 6.75 cum cum Rs

Cement Qtl. Qtl. Rs

Rate for 1 Cum /cum

b) R.Cement concrete (M-25) with 20mm

down graded b.h.g.c.b. chips including cost,

conveyance,royality,taxes,watering

and curing etc. complete.

A/R P-50 ITEM-5

DATA FOR 15 CUM

Mate 0.86 Nos. Each Rs

Man Mulia 20 Nos. Each Rs

Mason 2nd class 1.5 Nos. Each Rs

20mm size chips 8.1 cum cum Rs

10mm size chips 5.4 cum cum Rs

Sand 6.75 cum cum Rs

Cement 60.5 Qtl. Qtl. Rs

Concrete mixture 6 hrs hrs 229.55

Generator 6 hrs hrs 700

Over head charge & Contractor's Profit 15%

TOTAL LABOUR & MATERIAL

CARRIAGE & ROYALITY OF MATERIAL

20mm size chips 8.1 cum cum Rs

10mm size chips 5.4 cum cum Rs

Sand 6.75 cum cum Rs

Cement Qtl. Qtl. Rs

Rate for 1 Cum /cum

2 Rigid and smooth centring &shuttering

A) R.C.C. floor,roof slab,landing,

balconies,projecting,sun shade and

chajjas up to 4.3m ht.

A/R P-53 ITEM-10i

Non-sal wood scatelling 0.112 cum cum Rs

planks 38mm 0.34 cum cum Rs

120mm dia bullah 56 Rm Rm Rs

carriage of wood 1.142 cum 1.25 cum Rs

Considering 10 times use of the

materials,use for once Rs

Carpenter (2nd class) 2.75 Nos. Each Rs

Semi-skilled mulia 2.75 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

RATE FOR 1 SQM Rs /sqm

B) R.C.C. Stairs excluding landing

but including railing

A/R P-53 ITEM-10(III)

Battens 0.039 cum cum Rs

planks 38mm 0.228 cum cum Rs

120mm dia bullah 6.5 Rm Rm Rs

carriage of wood 0.35 cum 1.25 cum Rs

Considering 10 times use of the

materials,use for once Rs

Carpenter (2nd class) 2.75 Nos. Each Rs

Semi-skilled mulia 2.75 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

RATE FOR 1 SQM Rs /sqm

C) R.C.C.foundation & plinthband

and footing,base of columns,mass

concrete pre-cast slabs etc.

A/R P-54 ITEM-10(IV)

planks 25mm 0.267 cum cum Rs

80mm dia bullah 12.6 Rm Rm Rs

carriage of wood 0.3284 cum 1.25 cum Rs

Considering 10 times use of the

materials,use for once Rs

Carpenter (2nd class) 0.5 Nos. Each Rs

Semi-skilled mulia 0.5 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

RATE FOR 1 SQM Rs /sqm

D) R.C.C.beams,columns,grider

and bressmer etc.

A/R P-54 ITEM-10(V)

80mm diasal bullah 8 Rm Rm Rs

planks 38mm 0.218 cum cum Rs

120mm dia bullah 15.2 Rm Rm Rs

carriage of wood 0.456 cum 1.25 cum Rs

Considering 10 times use of the

materials,use for once Rs

Carpenter (2nd class) 2.75 Nos. Each Rs

Semi-skilled mulia 2.75 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

cost of nails Rs

RATE FOR 1 SQM Rs /sqm

E) R.C.C.Lintel

A/R P-54 ITEM-10(VI)

planks 38mm 0.413 cum cum Rs

120mm dia non sal bullah 21 Rm Rm Rs

carriage of wood 0.689 cum 1.25 cum Rs

Considering 10 times use of the

materials,use for once Rs

Carpenter (2nd class) 1.25 Nos. Each Rs

Semi-skilled mulia 1.25 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

cost of nails Rs

RATE FOR 1 SQM Rs /sqm

F) R.C.C. Walls and fins including attached pillaster.

A/R P-55 ITEM-10(VII)

DATA FOR 23.9SQM

Battens 0.269 cum cum Rs

planks 38mm 0.954 cum cum Rs

120mm dia bullah 100.8 Rm Rm Rs

carriage of wood 2.461 cum 1.25 cum Rs

Considering 10 times use of the

materials,use for once Rs

Carpenter (2nd class) 13.5 Nos. Each Rs

Semi-skilled mulia 13.5 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

cost of nails Rs

RATE FOR 1 SQM Rs /sqm

G) R.C.C. for slope roof.

A/R P-57ITEM-7(XI)

DATA FOR 9.3SQM

Non-sal wood scatelling 0.394 cum cum Rs

planks 25mm 0.0701 cum cum Rs

120mm dia bullah 73.17 Rm Rm Rs

80mm dia bullah 14.02 Rm Rm

carriage of wood 1.3612 cum 1.25 cum Rs

Considering 10 times use of the

materials,use for once Rs

Carpenter (2nd class) 3.43 Nos. Each Rs

Semi-skilled mulia 3.43 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

cost of nails Rs

RATE FOR 1 SQM Rs /sqm

3 R.Cement concrete (M-25) with 20mm

down graded b.h.g.c.b. chips including cost,

conveyance,royality,taxes,watering

and curing etc. complete.

RATE OF R.C.C (M-25) Rs /cum

ADD FOR centering&shuttering 1.5 x /sqm Rs

Add 1% for L.W. Cess

RATE OF R.C.C (M-25) Rs /cum

ADD FOR centering&shuttering 0.0 x /sqm Rs

Add 1% for L.W. Cess

C) COLUMN / BEAM

RATE OF R.C.C (M-25) Rs /cum

ADD FOR centering&shuttering 0.0 x /sqm Rs

Add 1% for L.W. Cess

RATE OF GROUND FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 2nd FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 3rd FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF R.C.C (M-25) Rs /cum

ADD FOR centering&shuttering 0.0 x /sqm Rs

Add 1% for L.W. Cess

RATE OF GROUND FLOOR Rs /cum

RATE OF R.C.C (M-20) 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 2nd FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 3rd FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF R.C.C (M-25) Rs /cum

ADD FOR centering&shuttering 0.0 x /sqm Rs

Add 1% for L.W. Cess

RATE OF GROUND FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 2nd FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF R.C.C (M-25) Rs /cum

ADD FOR centering&shuttering 0.0 X /sqm Rs

Add 1% for L.W. Cess

RATE OF GROUND FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs /cum

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF R.C.C (M-25) X 0.065 Rs /Sqm

ADD FOR centering&shuttering 1.1 X /sqm Rs

Add 1% for L.W. Cess

RATE OF GROUND FLOOR Rs /Sqm

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs /Sqm

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 2nd FLOOR Rs /Sqm

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 3rd FLOOR Rs /Sqm

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF R.C.C (M-25) Rs /Cum

ADD FOR centering&shuttering 0.0 X /sqm Rs

Add 1% for L.W. Cess

RATE OF GROUND FLOOR Rs /Cum

ADD FOR centering&shuttering 0.0 X /sqm Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs /Cum

ADD FOR centering&shuttering 0.0 X /sqm Rs

Add 1% for L.W. Cess

RATE OF R.C.C (M-25) X 0.0375 Rs /Sqm

ADD FOR centering&shuttering 0.0 X /sqm Rs

Add 1% for L.W. Cess

RATE OF GROUND FLOOR Rs /Sqm

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs /Sqm

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF R.C.C (M-25) X 0.045 Rs /Sqm

ADD FOR centering&shuttering 0.9 X /sqm Rs

Add 1% for L.W. Cess

RATE OF GROUND FLOOR Rs /Sqm

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs /Sqm

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 2nd FLOOR Rs /Sqm

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF R.C.C (M-25) X 0.08 Rs /Sqm

ADD FOR centering&shuttering 0.0 X /sqm Rs

Add 1% for L.W. Cess

RATE OF GROUND FLOOR Rs /Sqm

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs /Sqm

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 2nd FLOOR Rs /Sqm

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF R.C.C (M-25) Rs

ADD FOR centering&shuttering 0.0 X /sqm Rs

Add 1% for L.W. Cess

RATE OF GROUND FLOOR Rs

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

RATE OF 1st FLOOR Rs

ADD EXTRA FOR R.C.C 15% of labour of R.c.c. RS Rs

Over head charge & Contractor's Profit 15% Rs

ADD EXTRA FOR centering & shutt. 20% of centering & shutt. Rs Rs

Add 1% for L.W. Cess

4 Cutting,bending,binding M.S

Rod for R.C.C work including placing

in position and cost of M.S.Rod &

binding wire etc. cpomplete.

A/R P-52 ITEM-9

Mate 0.000 Nos. Each Rs

Black-smith special 0.3 Nos. Each Rs

Mulia 0.8 Nos. Each Rs

Labour charges Rs /Qtl

Add cost of M.S. Rod 1.05 Qtl Each Rs

Binding wire 0.8 Kg Each Rs

Over head charge & Contractor's Profit 15% Rs

Add carriage of M.S. Rod 1.05 Qtl Each Rs

Add 1% for L.W. Cess

RATE OF GROUND FLOOR Rs /Qtl

Add Extra labour 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Rate for First floor Rs /Qtl

Add 1% for L.W. Cess

RATE OF FIRST FLOOR Rs /Qtl

Add Extra labour 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Rate for Second floor Rs /Qtl

Add 1% for L.W. Cess

RATE OF SECOND FLOOR Rs /Qtl

Add Extra labour 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Rate for Third floor Rs /Qtl

Add 1% for L.W. Cess

RATE OF THIRD FLOOR Rs /Qtl

Add Extra labour 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Rate for Fourth floor Rs /Qtl

Add 1% for L.W. Cess

RATE OF FOURTH FLOOR Rs /Qtl

Add Extra labour 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Rate for Fourth floor Rs /Qtl

Add 1% for L.W. Cess

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.

Taking output = 100 cum

Hydraulic Excavator1 cum bucket capacity @ 60 cum per hour hour 1.67

Tipper 10 tonne capacity tonne.km 160 x L 3.86

Add 10 per cent of cost of carriage to cover cost of loading and unloading

Dozer 80 HP for spreading @ 200 cum per hour hour 0.5

Motor grader for grading @ 100 cum per hour hour 1

Water tanker6 KL capacity hour 4

Vibratory roller 8 -10 tonnes @ 100 cum per hour hour 1

Cost of water KL 24

Compensation for earth taken from private land cum 100

d) Overhead charges @ 7.5% on (a+b+c)

d) Contractor's profit @ 7.5% on (a+b+c)

e) Royalty + Carriage Cost on (c)

Cost for 100 cum = a+b+c+d+e

Rate per cum = (a+b+c+d+e+f)/100 /Cum

Iron work wrought and put up in grated doors windows & cage latrines (per qntl)

Data for =0.508 Qntl

Black smith-special 0.75 nos

Black smith(2nd class) 1 nos

Fitter -special 1 nos

Fitter (2nd class) 1 nos

Man Mulia 3.25 nos

Total labour cost for 0.508qntl

labour cost for 1qntl

b)Cost of steel 1 qntl

b) Overhead Charges 0.075

c) Contractor Profit 0.075

Labour cess 0.01 /Qntl

1 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.

Taking out put = 1 Hectare

AR Page-196, Item No.3

Mate 6 Nos. Each Rs

Mulia 150 Nos. Each Rs

Tractor-trolley 1 Hour 357.55 Rs

Over head charges @ 7.5% Rs

Contractor's Profit @ 7.5% Rs

Total for 1 Hectare Rs

Rate for 1 Sqmt Rs /1Sqm

Add 1% for L.W. Cess Rs

2 Earth work in ordinry soil within 50m lead and 1.5m lift including rough dressing and breaking clods to maximum 5cm. To 7cm. And laying in layers not exceeding 0.3m in depth and as per specification complete.

A/R-P-1 ITEM-1(a)

Data for 100 cum

Man Mulia 16 Nos. Each Rs

Female Mulia 16 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

Rate for I cum /1cum

ADD 20% extra for foundation

Add 1% for L.W. Cess

3 Earth work in hard soil within 50m lead and 1.5m lift including rough dressing and breaking clods to maximum 5cm. To 7cm. And laying in layers not exceeding 0.3m in depth and as per specification complete.

A/R-P-2 ITEM-2(a)

Data for 100 cum

Man Mulia 21.5 Nos. Each Rs

Female Mulia 21.5 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

Rate for I cum /1cum

ADD 20% extra for foundation

Add 1% for L.W. Cess

4 Earth work in stoney earth and gravels mixed with stone and boulder not exceeding 0.014cum in volume soil within 50m lead and 1.5m lift including rough dressing and breaking clods to maximum 5cm. To 7cm. And laying in layers not exceeding 0.3m in depth and as per specification complete.

Data for 100 cum

Man Mulia 33.53 Nos. Each Rs

Female Mulia 33.53 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

Rate for I cum /1cum

ADD 20% extra for foundation

Add 1% for L.W. Cess

5 Earth work in all kinds of soil within 50m lead and 1.5m lift including rough dressing and breaking clods to maximum 5cm. To 7cm. And laying in layers not exceeding 0.3m in depth and as per specification complete.

Basic Rate /100cum

Rate for I cum /1cum

ADD 20% extra for foundation

Add 1% for L.W. Cess

6 Preparation of foundation bed in hard rock requiring chieselling, hammering and tampering; wire brushing and air & water jetting etc including hire charges of all equipments and T & P etc. complete for dams, barrages and power house etc. over rock foundation as directed by Engineer-in-charge.

A/R-P-23 ITEM-21

Stone Cutter 0.2 Nos Each Rs

Male Worker 0.1 Nos Each Rs

B. Brushing and removal of debris

Female Worker 0.1 Nos Hour Rs

C. Air and Water jetting in three operations

i) Air compressor / one point supply charges 0.05 Hrs Hour 179.13 Rs

ii) Water charges LS Rs 1

iii) Air hose, water hose & fittings and jet point charges LS Rs 1.5

iv) Jet operator 0.01 Nos Each Rs

v) Helper 0.01 Nos Each Rs

Over head charge 7.5%

Contractor Profit 7.5%

7 Fixing 25 mm. dia anchor bars in foundation rock including drilling 35 mm. dia holes, fixing wedged anchor and grouting with cement mortar 1:4 complete as per the direction of Engineer-in-charge excluding cost of M.S. rods for dams, barrages and power house structures including pull testing of 30% of anchors. (Depth of hole only to be measured for payment purpose).

AR page23 item no.22 Per 1Rm

A. Drillinq Hole

i) 400cfm Compressor with crew 0.145 0.000 hr 744.35 Rs

ii) Jack Hammer 0.435 hr 7.83 Rs

iii) Labour for drilling holes - Driller 0.000 Nos Rs

Male Worker 0.000 Nos Rs

iv) Cost of drill rod 0.000 Nos Rs

B. Makinq wedqed anchors and fixinq

i) Cutting & splitting upto 10 cm.

Fitter Special 0.1 Nos Rs

Male Worker 0.1 Nos Rs

ii) Fixing anchors into holes -

Hammer man 0.05 Nos Rs

Male Worker 0.05 Nos Rs

iii) Cost of wedge L.S. Rs 2.5

iv) Grouting with cement mortar including materials and labours L.S. Rs 6

Add for pull testing L.S. Rs 2.5

O.H.C. & C.P. @ 15% Rs

6 Filling F&P with sand

A/R-P-8 ITEM-15

Data for 100 cum

Female Mulia 12.36 Nos. Each Rs

Cost of sand 100 cum cum Rs

Over head charge & Contractor's Profit 15% Rs

Rate for one cum /1cum

CARRIAGE & ROYALITY OF MATERIAL

Total cost /1cum

Add 1% for L.W. Cess

B) BACK FILLING

Filling foundation & plinth with excavated earth

Eearth work in excavated earth

Take 2/3rd rate of earthwork

Add 1% for L.W. Cess

Rate for one cum /1cum

C) BACK FILLING Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general.

1st Extra lift of 1.5m (upto 7.5m)

Man Mulia Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

Add 1% for L.W. Cess

Rate for one cum /1cum

7 Cement concrete (1:3:6) with 4cm

size hard granite metal including cost,

conveyance,royality,taxes,watering

and curing etc. complete.

A/R P-43 ITEM-3

Man Mulia 2.5 Nos. Each Rs

Women Mulia 1.4 Nos. Each Rs

Mason 2nd class 0.18 Nos. Each Rs

H.B.granite stone 0.96 cum cum Rs

Sand 0.48 cum cum Rs

Cement 2.29 Qtl. Qtl. Rs

Over head charge & Contractor's Profit 15%

TOTAL LABOUR & MATERIAL

CARRIAGE & ROYALITY OF MATERIAL

H.B.granite stone 0.96 cum cum Rs

Sand 0.48 cum cum Rs

Cement 2.29 Qtl. Qtl. Rs

Add 1% for L.W. Cess

7 Cement concrete (1:4:8) with 4cm

size hard granite metal including cost,

conveyance,royality,taxes,watering

and curing etc. complete.

A/R P-43 ITEM-3

Man Mulia 2.5 Nos. Each Rs

Women Mulia 1.4 Nos. Each Rs

Mason 2nd class 0.18 Nos. Each Rs

H.B.granite stone 0.96 cum cum Rs

Sand 0.48 cum cum Rs

Cement 1.72 Qtl. Qtl. Rs

Over head charge & Contractor's Profit 15%

TOTAL LABOUR & MATERIAL

CARRIAGE & ROYALITY OF MATERIAL

H.B.granite stone 0.96 cum cum Rs

Sand 0.48 cum cum Rs

Cement Qtl. Qtl. Rs

Add 1% for L.W. Cess

10 Cement concrete (1:2:4) with 12mm

size hard granite chips including cost,

conveyance,royality,taxes,watering

and curing etc. complete.

A/R P-44 ITEM-7

Man Mulia 3.2 Nos. Each Rs

Women Mulia 1.4 Nos. Each Rs

Mason 2nd class 0.68 Nos. Each Rs

B.H.G.C.B. Chips 12mm size. 0.9 cum cum Rs

Sand 0.45 cum cum Rs

Cement 3.23 Qtl. Qtl. Rs

Over head charge & Contractor's Profit 15%

TOTAL LABOUR & MATERIAL

CARRIAGE & ROYALITY OF MATERIAL

Add 1% for L.W. Cess

8 Providing & laying 80mm thick factory made cement concrete interlocking paver block of M-40 grade made by block makine machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

As per CPWD Analysis of rates 2012

Page - 967, Item No.16.68

Data for 10 Sqm

Mason special 0.5 Nos. Each Rs

Mason 2nd Class 0.5 Nos. Each Rs

Mulia 1.5 Nos. Each Rs

Bedding layer 50mm thick with Course Sand = 10x0.05 0.5 Cum Cum Rs

Filling the joints with Fine Sand 0.15 Cum Cum Rs

Coverage area of Paver block 0.390 sft / Piece

80mm thick Paver Block 10 Sqm Sqm 608.4 Rs

C Water Charges @ 1% over (A+B) Rs

D Over head charge 7.5% on (A+B) Rs

E Contractor's profit 7.5% on (A+B) Rs

F CARRIAGE & ROYALTY OF MATERIAL

Course Sand 0.5 Cum Cum Rs

Fine Sand 0.15 Cum Cum Rs

Carriage of Paver Block 10 Sqm Sqm Rs

Total (A+B+C+D+E+F) Rs /10sqm

Add 1% L.W. Cess Rs

Rate for 1 Sqm Rs /Sqm

9 Construction of granular sub-base by providing Grading-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401

(Data Book Page-94 Item-4.1B)

Taking output = 300 cum

Mate 0.48 each Rs

Mulia skilled 2 each Rs

Mulia Unskilled 10 each Rs

Motor Grader 110 HP 6 Hours 2391.39 Rs

Water tanker 3 Hours 900.84 Rs

Vibrotory Roller 6 Hours 1538.54 Rs

Tractor Rotavator 12 Hours 210.44 Rs

2.36mm below @ 40% (Dust) 153.6 Cum Rs

Cost of Water 18 KL 10 Rs

Total (a+b+c) Rs

d) Overhead charges 7.5% Rs

e) Contractor's Profit @ 7.5% Rs

Total (a+b+c+d+e) Rs

f) Carriage & Royalty

26.5 mm to 9.5 mm @ 35 % Cum Rs

9.5 mm to 2.36 mm @ 25% Cum Rs

2.36 mm below @ 40% Cum Rs

Total Cost (a+b+c+d+e+f) = Rs

Rate per cum Rs /1 cum

Add 1% for L.W. Cess Rs

8 Random Rubble H.g.stone masonry

in c.m(1:6)with cost,coveyance,royality

watering&curing etc. complete.

A/R P-75 ITEM- 3

IN FOUNDATION & PLINTH

Mason special 0.35 Nos. Each Rs

Mason 2nd class 1.41 Nos. Each Rs

Man mulia 1.76 Nos. Each Rs

Women mulia 1.41 Nos. Each Rs

Random Rubble H.g.stone 1 Nos. cum Rs

Sand 0.34 cum cum Rs

Cement 0.4000 Qtl Qtl. Rs

Over head charge & Contractor's Profit 15%

TOTAL LABOUR & MATERIAL /cum

CARRIAGE & ROYALITY OF MATERIAL

Random Rubble H.g.stone 1 Nos. cum Rs

Sand 0.34 cum cum Rs

Cement 0.4000 Qtl Qtl. Rs

Rate for F&P /cum

Add 1% for L.W. Cess

10 Brick work with Fly Ash bricks having

crusing strength not less than

75kg/cm^2 in cement motar (1:6)

with cost,coveyance,royality

watering&curing etc. complete.

A/R P-71 ITEM- 3

IN FOUNDATION & PLINTH

Mason special 0.35 Nos. Each Rs

Mason 2nd class 1.05 Nos. Each Rs

Man mulia 1.55 Nos. Each Rs

Women mulia 1.41 Nos. Each Rs

Bricks 25cmx12cmx8cm size 350 Nos. 1000 Nos. Rs

Sand cum cum Rs

Cement 0.000 Qtl Qtl. Rs

Over head charge & Contractor's Profit 15%

TOTAL LABOUR & MATERIAL /cum

CARRIAGE & ROYALITY OF MATERIAL

Bricks 25cmx12cmx8cm size 350 Nos. 1000 Nos. Rs

Sand cum cum Rs

Cement Qtl Qtl. Rs

Rate for F&P /cum

Add 1% for L.W. Cess

Rate for F&P /cum

Add for super stucture 33

Over head charge & Contractor's Profit 15%

Add 1% for L.W. Cess

Rate of Ground Floor

ADD FOR 1ST FLOOR (extra labour) 0.15 x

Over head charge & Contractor's Profit 15%

Add 1% for L.W. Cess

Rate of First Floor

ADD FOR 2nd FLOOR (extra labour) 0.15 x

Over head charge & Contractor's Profit 15%

Add 1% for L.W. Cess

Rate of Second Floor

ADD FOR 3rd FLOOR (extra labour) 0.15 x

Over head charge & Contractor's Profit 15%

Add 1% for L.W. Cess

Rate of Third Floor

ADD FOR 4th FLOOR (extra labour) 0.15 x

Over head charge & Contractor's Profit 15%

Add 1% for L.W. Cess

Rate of Third Floor

ADD FOR 4th FLOOR (extra labour) 0.15 x

Over head charge & Contractor's Profit 15%

Add 1% for L.W. Cess

14 Brick work with Fly Ash bricks having

crusing strength not less than

75kg/cm^2 in cement motar (1:4)

with cost,coveyance,royality

watering&curing etc. complete.

A/R P-71 ITEM- 2

IN FOUNDATION & PLINTH

Mason special 0.35 Nos. Each Rs

Mason 2nd class 1.05 Nos. Each Rs

Man mulia 1.55 Nos. Each Rs

Women mulia 1.41 Nos. Each Rs

Bricks 25cmx12cmx8cm size 350 Nos. 1000 Nos. Rs

Sand cum cum Rs

Cement 1 Qtl Qtl. Rs

Over head charge & Contractor's Profit 15%

TOTAL LABOUR & MATERIAL /cum

CARRIAGE & ROYALITY OF MATERIAL

Bricks 25cmx12cmx8cm size 350 Nos. 1000 Nos. Rs

Sand cum cum Rs

Cement 1 Qtl Qtl. Rs

Rate for F&P /cum

Add 1% for L.W. Cess

Add for super stucture 33

Add 1% for L.W. Cess

Rate of Ground Floor

ADD FOR 1ST FLOOR (extra labour) 0.15 x

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of First Floor

ADD FOR 2nd FLOOR (extra labour) 0.15 x

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Second Floor

ADD FOR 3rd FLOOR (extra labour) 0.15 x

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Third Floor

ADD FOR 4th FLOOR (extra labour) 0.15 x

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Fourth Floor

ADD FOR 3rd FLOOR (extra labour) 0.15 x

Over head charge & Contractor's Profit 15%

Add 1% for L.W. Cess

11 2.5 cm thick grading concrete (1:2:2)

with 4.7mmsize hard granite chips

including cost,conveyance,royality,

taxes,watering& curing etc. complete.

A/R P-47 ITEM-17

Man Mulia 0.33 Nos. Each Rs

Women Mulia 0.03 Nos. Each Rs

Mason special class 0.1 Nos. Each Rs

H.B.granite stone chips 4.7mm size 0.6000 cum cum Rs

Sand 0.6000 cum cum Rs

Cement 0.2000 Qtl. Qtl. Rs

Over head charge & Contractor's Profit 15%

TOTAL LABOUR & MATERIAL

CARRIAGE & ROYALITY OF MATERIAL

H.B.granite stone chips 4.7mm size 0.6000 cum cum Rs

Sand 0.6000 cum cum Rs

Cement 0.2000 Qtl. Qtl. Rs

Total Rate for Ground floor /sqm

Add 1% for L.W. Cess

Rate of Ground Floor

Extra labour for First floor 0.15

Over head charge & Contractor's Profit 0.15 Rs

Rate for First floor /sqm

Add 1% for L.W. Cess

Rate of First Floor

Extra labour for Second floor 0.15

Over head charge & Contractor's Profit 0.15 Rs

Rate for Second floor /sqm

Add 1% for L.W. Cess

Rate of Second Floor

Extra labour for Third floor 0.15

Over head charge & Contractor's Profit 0.15 Rs

Rate for Third floor /sqm

Add 1% for L.W. Cess

Rate of Third Floor

Extra labour for Fourth floor 0.15

Over head charge & Contractor's Profit 0.15 Rs

Rate for Fourth floor /sqm

Add 1% for L.W. Cess

Rate of Fourth Floor

Extra labour for Fourth floor 0.15

Over head charge & Contractor's Profit 0.15 Rs

Rate for Fourth floor /sqm

Add 1% for L.W. Cess

12 Aerated Autoclaved Fly ash bricks/masonry in filler/inside walls using A.A.C blocks having compressive strength not less than 4N/mm2 conforming to IS:2105 (Part-3)-2005 and IS:6441-1972 in cement mortar of mix (1:6) and screened and washed sand for mortar for use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, royalty, loading, unloading of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.

DATA FOR 1 CUM AT KEONJHAR

IN FOUNDATION & PLINTH

Mason special 0.35 Nos. Each Rs

Mason 2nd class 0 Nos. Each Rs

Man mulia 0.3 Nos. Each Rs

Women mulia 0.3 Nos. Each Rs

Aerated Autoclaved Fly Ash Block (625mmx200mmx200mm) using 38 Nos. in 1cum masonry 1 Cum cum Rs

Sand 0.09 cum cum Rs

Cement 0.22 Qtl Qtl. Rs

OHC & C.P. @ 15%

TOTAL LABOUR & MATERIAL /cum

CARRIAGE & ROYALITY OF MATERIAL

A.A.C. Block 1 Cum Cum Rs

Sand cum cum Rs

Cement Qtl Qtl. Rs

Rate for F&P /cum

ADD 1% for L.W. Cess

Rate for F&P /cum

Add for super stucture 33

Over head charge & Contractor's Profit 0.15 Rs

Add for L.W. Cess @ 1%

TOTAL RATE FOR SUPERSTRUCTURE /cum

Rate for Superstructure G.F. /cum

ADD FOR 1ST FLOOR (extra labour) 0.15 x

Overhead Charges @ 7.5%

Contractor's Profit @ 7.5%

Add for L.W. Cess @ 1%

TOTAL RATE FOR FIRST FLOOR /cum

Rate for First Floor /cum

ADD FOR 2nd FLOOR (extra labour) 0.15 x

Overhead Charges @ 7.5%

Contractor's Profit @ 7.5%

Add for L.W. Cess @ 1%

TOTAL RATE FOR SECOND FLOOR /cum

Rate for Second Floor /cum

ADD FOR 3rd FLOOR (extra labour) 0.15 x

Overhead Charges @ 7.5%

Contractor's Profit @ 7.5%

Add for L.W. Cess @ 1%

TOTAL RATE FOR THIRD FLOOR /cum

Rate for Third Floor /cum

ADD FOR 4th FLOOR (extra labour) 0.15 x

Overhead Charges @ 7.5%

Contractor's Profit @ 7.5%

Add for L.W. Cess @ 1%

TOTAL RATE FOR FOURTH FLOOR /cum

Rate for Fourth Floor /cum

ADD FOR 5th FLOOR (extra labour) 0.15 x

Overhead Charges @ 7.5%

Contractor's Profit @ 7.5%

Add for L.W. Cess @ 1%

TOTAL RATE FOR FIFTH FLOOR /cum

13 16mm thick cement plaster (1:6) over

brick work with cst of all materials and

all labour etc.

A/R P-105 ITEM-14

Sand 0.018 cum cum Rs

Cement 0.043 Qtl Qtl Rs

Mason 2nd class 0.16 Nos. Each Rs

Man mulia 0.13 Nos. Each Rs

Women mulia 0.11 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

TOTAL LABOUR & MATERIAL /sqm

CARRIAGE & ROYALITY OF MATERIAL

Sand 0.018 cum cum Rs

Cement 0.043 Qtl Qtl Rs

Rate per sqm( GROUND FLOOR) Rs /sqm

Add 1% for L.W. Cess

Rate of First Floor

ADD FOR 1ST FLOOR (extra labour) 0.03 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of First Floor

ADD FOR 2nd FLOOR (extra labour) 0.03 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Second Floor

ADD FOR 3rd FLOOR (extra labour) 0.03 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Third Floor

ADD FOR 4th FLOOR (extra labour) 0.03 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

14 12mm thick cement plaster (1:6) over

brick work with cst of all materials and

all labour etc.

A/R P-103 ITEM-4

Sand 0.015 cum cum Rs

Cement 0.0358 Qtl Qtl Rs

Mason 2nd class 0.14 Nos. Each Rs

Man mulia 0.07 Nos. Each Rs

Women mulia 0.05 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

TOTAL LABOUR & MATERIAL Rs /sqm

CARRIAGE & ROYALITY OF MATERIAL

Sand 0.015 cum cum Rs

Cement 0.0358 Qtl Qtl Rs

Rate per sqm( GROUND FLOOR) Rs /sqm

Add 1% for L.W. Cess

Rate of Ground Floor

ADD FOR 1ST FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of First Floor

ADD FOR 2nd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Second Floor

ADD FOR 3rd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Third Floor

ADD FOR 4th FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

15 6mm thick cement plaster (1:4) over

R.C.C. work with cost of all materials and

all labour etc.

A/R P-109 ITEM-27

Sand 0.0075 cum cum Rs

Cement 0.0372 Qtl Qtl Rs

Mason 2nd class 0.14 Nos. Each Rs

Man mulia & women mulia 0.1 Nos. Each Rs

Man mulia 0.05 Nos. Each Rs

Man mulia for mixing sand and cement in small quantities and watering 0.02 Nos. Each Rs

OHC & Contractor's Profit 15% Rs

TOTAL LABOUR & MATERIAL

CARRIAGE & ROYALITY OF MATERIAL

Sand 0.0075 cum cum Rs

Cement 0.0372 Qtl Qtl Rs

Rate per sqm( GROUND FLOOR) Rs /sqm

Add 1% for L.W. Cess

Rate of Ground Floor

ADD FOR 1ST FLOOR (extra labour) 0.03 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of First Floor

ADD FOR 2nd FLOOR (extra labour) 0.03 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Second Floor

ADD FOR 3rd FLOOR (extra labour) 0.03 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Third Floor

ADD FOR 4th FLOOR (extra labour) 0.03 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

14 12mm thick cement plaster (1:4) over

brick work with cst of all materials and

all labour etc.(with punning& bitumen painting )

A/R P-103 ITEM-7

Sand 0.015 cum cum Rs

Cement 0.0644 Qtl Qtl Rs

Mason 2nd class 0.15 Nos. Each 190 Rs

Man mulia 0.06 Nos. Each 150 Rs

Women mulia 0.05 Nos. Each 150 Rs

OHC & Contractor's Profit 15% Rs

Add for bitumen painting Rs 6.6

TOTAL LABOUR & MATERIAL

CARRIAGE & ROYALITY OF MATERIAL

Sand 0.015 cum cum Rs

Cement 0.0644 Qtl Qtl Rs

Rate per sqm( GROUND FLOOR) Rs /sqm

Add 1% for L.W. Cess

Rate of Ground Floor

ADD FOR 1ST FLOOR (extra labour) 0.03 Rs

Add 1% for L.W. Cess

Rate of First Floor

ADD FOR 2nd FLOOR (extra labour) 0.03 Rs

Add 1% for L.W. Cess

Rate of Second Floor

ADD FOR 2nd FLOOR (extra labour) 0.03 Rs

Add 1% for L.W. Cess

Rate of First Floor

ADD FOR 2nd FLOOR (extra labour) Rs

16 Fixing tiles (Vitrified Tiles of size 600 mm x 600 mm)

in floors treads or steps and

landing on 20 mm thick bed of cement

mortar 1:4 (1 cement: 4 sand) jointed with

neat cement slury mixed with pigment to

match the shades of the tiles including

rubing and polishing with cost,coveyance

of all materials etc. complete.

A/R P-89 ITEM-16

DATA FOR 10 SQM

Cement 0.744 Qtl. Qtl. Rs

Sand 0.21 cum cum Rs

Ordinary cement for slurry 0.33 Qtl. Qtl. Rs

White Cement for grouting 0.076 Qtl. Qtl. Rs

Vitrified Tiles 10 Sqmt Sqmt Rs

Mason special 2.16 Nos. Each Rs

Mulia 2.16 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

Rate for 1 sqm Rs /sqm

CARRIAGE & ROYALITY OF MATERIAL

Cement Qtl. Qtl. Rs

Sand cum cum Rs

Ordinary cement for slurry Qtl. Qtl. Rs

cement for grouting Qtl. Qtl. Rs

Vitrified Tiles 1 Sqmt Sqmt Rs

TOTAL for ground floor /sqm

Add 1% for L.W. Cess

Rate of Ground Floor Rs

ADD FOR 1ST FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of First Floor Rs

ADD FOR 2nd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Second Floor Rs

ADD FOR 3rd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Third Floor Rs

ADD FOR 4th FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

17 Fixing tiles (Vitrified) in dadoo, skirting and rises of

steps on12 mm thick cement plaster in

mortar 1:3 (1 cement: 3 sand) jointed with

neat cement slury mixed with pigment to

match the shades of the tiles including

rubing and polishing with cost,coveyance

of all materials etc. complete.

A/R P-90 ITEM-17

DATA FOR 10 SQM

Cement 0.715 Qtl. Qtl. Rs

Sand 0.15 cum cum Rs

Ordinary cement for slurry 0.66 Qtl. Qtl. Rs

Vitrified Tiles 10 Sqmt Sqmt Rs

Mason special 3.25 Nos. Each Rs

Mulia 3.25 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

Rate for 1 sqm Rs

CARRIAGE & ROYALITY OF MATERIAL

Cement 0.0715 Qtl. Qtl. Rs

Sand 0.015 cum cum Rs

Ordinary cement for slurry 0.066 Qtl. Qtl. Rs

Vitrified Tiles 1 Sqmt Sqmt Rs

TOTAL for ground floor Rs /sqm

Add 1% for L.W. Cess

Rate of Ground Floor Rs

ADD FOR 1ST FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of First Floor Rs

ADD FOR 2nd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Second Floor Rs

ADD FOR 3rd FLOOR (extra labour) 0.05 Rs

Add 1% for L.W. Cess

Rate of Second Floor Rs

ADD FOR 3rd FLOOR (extra labour) 0.05 Rs

Add 1% for L.W. Cess

19 Fixing tiles (Ceramic Tiles)

in floors treads or steps and

landing on 20 mm thick bed of cement

mortar 1:4 (1 cement: 4 sand) jointed with

neat cement slury mixed with pigment to

match the shades of the tiles including

rubing and polishing with cost,coveyance

of all materials etc. complete.

A/R P-89 ITEM-16

DATA FOR 10 SQM

Cement 0.744 Qtl. Qtl. Rs

Sand 0.21 cum cum Rs

Ordinary cement for slurry 0.33 Qtl. Qtl. Rs

White Cement for grouting 0.076 Qtl. Qtl. Rs

Ceramic Tiles 10 Sqmt Sqmt Rs

Mason special 2.16 Nos. Each Rs

Mulia 2.16 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

Rate for 1 sqm Rs /sqm

CARRIAGE & ROYALITY OF MATERIAL

Cement Qtl. Qtl. Rs

Sand cum cum Rs

Ordinary cement for slurry Qtl. Qtl. Rs

cement for grouting Qtl. Qtl. Rs

Ceramic Tiles 1 Sqmt Sqmt Rs

TOTAL for ground floor /sqm

Add 1% for L.W. Cess

Rate of Ground Floor Rs

ADD FOR 1ST FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of First Floor Rs

ADD FOR 2nd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Second Floor Rs

ADD FOR 3rd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

20 Fixing tiles (Ceramic Wall Tile) in dadoo, skirting and rises of

steps on12 mm thick cement plaster in

mortar 1:3 (1 cement: 3 sand) jointed with

neat cement slury mixed with pigment to

match the shades of the tiles including

rubing and polishing with cost,coveyance

of all materials etc. complete.

A/R P-90 ITEM-17

DATA FOR 10 SQM

Cement 0.715 Qtl. Qtl. Rs

Sand 0.15 cum cum Rs

Ordinary cement for slurry 0.66 Qtl. Qtl. Rs

Ceramic Wall Tiles 10 Sqmt Sqmt Rs

Mason special 3.25 Nos. Each Rs

Mulia 3.25 Nos. Each Rs

semi skilled for rubbing 7.6 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

Rate for 1 sqm Rs

CARRIAGE & ROYALITY OF MATERIAL

Cement 0.0715 Qtl. Qtl. Rs

Sand 0.015 cum cum Rs

Ordinary cement for slurry 0.066 Qtl. Qtl. Rs

Ceramic Wall Tiles 1 Sqmt Sqmt Rs

TOTAL for ground floor Rs /sqm

Add 1% for L.W. Cess

Rate of Ground Floor Rs

ADD FOR 1ST FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of First Floor Rs

ADD FOR 2nd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Second Floor Rs

ADD FOR 3rd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

18 Fixing tiles (Granite Tiles)

in floors treads or steps and

landing on 25 mm thick bed of cement

mortar 1:1 (1 cement: 1 sand) jointed with

neat cement slury mixed with pigment to

match the shades of the tiles including

rubing and polishing with cost,coveyance

of all materials etc. complete.

A/R P-89 ITEM-16

DATA FOR 10 SQM

Cement 1.857 Qtl. Qtl. Rs

Sand 0.13 cum cum Rs

Ordinary cement for slurry 0.44 Qtl. Qtl. Rs

Cement for grouting 0.44 Qtl. Qtl. Rs

Granite Tiles 10 Sqmt Sqmt Rs

Mulia 5.5 Nos. Each Rs

Mason special 2.16 Nos. Each Rs

Mulia 2.16 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

CARRIAGE & ROYALITY OF MATERIAL

Cement Qtl. Qtl. Rs

Sand cum cum Rs

Ordinary cement for slurry Qtl. Qtl. Rs

cement for grouting Qtl. Qtl. Rs

Ceramic Tiles Sqmt Sqmt Rs

TOTAL for ground floor /sqm

Add 1% for L.W. Cess

Rate of Ground Floor Rs

ADD FOR 1ST FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of First Floor Rs

ADD FOR 2nd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Second Floor Rs

ADD FOR 3rd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

19 Fixing tiles (Industrial Vitrified Tiles)

in floors treads or steps and

landing on 20 mm thick bed of cement

mortar 1:4 (1 cement: 4 sand) jointed with

neat cement slury mixed with pigment to

match the shades of the tiles including

rubing and polishing with cost,coveyance

of all materials etc. complete.

A/R P-89 ITEM-16

DATA FOR 10 SQM

Cement 0.744 Qtl. Qtl. Rs

Sand 0.21 cum cum Rs

Ordinary cement for slurry 0.33 Qtl. Qtl. Rs

White Cement for grouting 0.076 Qtl. Qtl. Rs

Industrial Vitrified Tiles 10 Sqmt Sqmt Rs

Mason special 2.16 Nos. Each Rs

Mulia 2.16 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

Rate for 1 sqm Rs /sqm

CARRIAGE & ROYALITY OF MATERIAL

Cement Qtl. Qtl. Rs

Sand cum cum Rs

Ordinary cement for slurry Qtl. Qtl. Rs

cement for grouting Qtl. Qtl. Rs

Industrial Vitrified Tiles 1 Sqmt Sqmt Rs

TOTAL for ground floor /sqm

Add 1% for L.W. Cess

21 Providing fitting and fixing of false ceilling with Aluminium anodised T Section No. 3215 with 2'-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0"x2'-0" suspended from ceiling etc complete.

Data for 19.53 Sqm

Al. T Section No. 3215 = 18.2

Al. Perimeter Angle Section No. 1785 =

Waistage 5% = Kg

Kg Each 224.68 =

Pvc Rawl Plug 42 Nos. Each 7

9" Connecting hooks with nuts & washer 42 Nos. Each 5.5

G.I. Wire 2 Kg Each 40 =

12mm thick prelaminated Novapan Board 20.59 Sqm Each 710.82

65mm PVC plug 50 Nos. Each 0.6

Screws 50mm x 8mm 50 Nos. Each 0.8

Hire charges of drills machine 1.5 day Each 100

Carpenter 1st class 5 Nos. Each

Mulia 5 Nos. Each

c. OHC & Contractor's Profit 15%

Add 1% for L.W. Cess

21 Fixing tiles (Kota Stone)

in floors treads or steps and

landing on 25 mm thick bed of cement

mortar 1:1 (1 cement: 1 sand) jointed with

neat cement slury mixed with pigment to

match the shades of the tiles including

rubing and polishing with cost,coveyance

of all materials etc. complete.

A/R P-89 ITEM-16

DATA FOR 10 SQM

Cement 1.857 Qtl. Qtl. Rs

Sand 0.13 cum cum Rs

Ordinary cement for slurry 0.44 Qtl. Qtl. Rs

Cement for grouting 0.44 Qtl. Qtl. Rs

Kota Stones 10 Sqmt Sqmt Rs

Mulia 5.5 Nos. Each Rs

Mason special 2.16 Nos. Each Rs

Mulia 2.16 Nos. Each Rs

Over head charge & Contractor's Profit 15% Rs

CARRIAGE & ROYALITY OF MATERIAL

Cement Qtl. Qtl. Rs

Sand cum cum Rs

Ordinary cement for slurry Qtl. Qtl. Rs

cement for grouting Qtl. Qtl. Rs

Kota Stones Sqmt Sqmt Rs

TOTAL FOR 10 SQM /10sqm

TOTAL FOR 1 SQM

Add for Wax Polish

Add 1% for L.W. Cess

TOTAL FOR 1 SQM /sqm

Rate of Ground Floor Rs

ADD FOR 1ST FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of First Floor Rs

ADD FOR 2nd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Second Floor Rs

ADD FOR 3rd FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

Rate of Third Floor Rs

ADD FOR 4th FLOOR (extra labour) 0.05 Rs

Over head charge & Contractor's Profit 0.15 Rs

Add 1% for L.W. Cess

20 Fixing tiles (Granite) in dadoo, skirting and rises of

steps on12 mm thick cement plaster in