Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAccepted-AOC | ₹3.0 L | L1 | Accepted-AOC Stands Lowest. |
| 2 | L2₹3.1 L+₹2,368 (0.78%)Rejected-Finance KANTAPAHARI CHHATNA BANKURA WB 722136 | CHHATNA | BANKURA | WEST BENGAL | 722136 | ₹3.1 L+₹2,368 (0.78%) | L2 | Rejected-Finance L2 |
| 3 | L3₹3.1 L+₹3,612 (1.19%)Rejected-Finance 12B JAHARLAL DUTTA LANE KOLKATA 700067 | KOLKATA | WEST BENGAL | 700067 | ₹3.1 L+₹3,612 (1.19%) | L3 | Rejected-Finance L3 |
| 4 | L4₹3.1 L+₹3,885 (1.28%)Rejected-Finance | ₹3.1 L+₹3,885 (1.28%) | L4 | Rejected-Finance L4 |
| 5 | L4₹3.1 L+₹3,885 (1.28%)Rejected-Finance | ₹3.1 L+₹3,885 (1.28%) | L4 | Rejected-Finance L4 |
Tender Value
₹3.0 L
EMD Value
₹6,070
Closing Date
11 Mar 2026, 11:00 amClosed
Assistant Engineer, BNWSD-II, VYBK
The Office of The Assistnt Engineer, Bidhannagar West Sub Division-II, Public Works Directorate, Government of West Bengal, Room No. 123, 1st Floor, Purta Bhavan, DF Block, Sector - I, Salt Lake, Kolkata - 700 091
Emergent Repair and Painting of AD Cut out within the compound Vivekananda Yuba Bharati Krirangan during the year 2025 2026
2026_WBPWD_1016374_1
NIeT-28/AE/BNWSD-II of 2025-2026
Open Tender
CIVIL WORKS
Percentage
10 days
Salt Lake
Please refer Tender documents.
6 documents required · 6 mandatory
₹6,070
Yes
10 Aug 2026
27 Feb 2026
13 Mar 2026
27 Feb 2026
11 Mar 2026
27 Feb 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
a)In ground floor including roof. | - | Sq. M. | - | - |
| 2 | (a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department] | 1 | Sq. M. | - | - |
| 3 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety. | 1 | Cu. M. | - | - |
| 4 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar. (b) 15 mm thick plaster. | - | Sq. M. | - | - |
| 5 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) | - | Sq. M. | - | - |
| 6 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats. | - | Sq. M. | - | - |
| 7 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat). c) Premium 100% Acrylic Emulsion. | - | Sq. M. | - | - |
| 8 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | 1 | sq. M. | - | - |
| 9 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With other than hi-gloss of approved quality - (iii) One coat (with any shade except white). | 1 | Sq. M. | - | - |
stage.html
html • 0.12 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.75 MB
2911.pdf
Tender Documents • 1.15 MB
BOQ_2496787.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .