REPAIR/ MAINT TO EXTERNAL WATER SUPPLY SYSTEM CLEANING OF OVER HEAD RESERVOIRS/SERVICE TANKS AND REPAIR/MAINT OF WATER SUPPLY PUMPING SETS AND ALLIED ITEMS WORKS AT CG COMPLEX DORAHA AND PHILLOUR UNDER GE LUDHIANA

Amount

Sch 'A' sec-I

Excavation in trenches n. exc 1.5 metre wide for taking out/ laying pipe line etc. and not exceeding 1.5 metre deep and getting out in soft/ loose soil complete all as specified & directed by Engineer-in-charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed by Engineer-in-charge.

Removal of excavated surplus spoil to a distance n.exc 50 metre and depositing where directed at level not exceeding 1.5 metre above the starting point complete all as specified & directed by Engineer-in-charge.

Taking down cast iron water mains including burning out joints and recovering lead size of bore 150mm complete all as specified & directed by Engineer-in-charge.

Taking down cast iron water mains including burning out joints and recovering lead size of bore 100mm complete all as specified & directed by Engineer-in-charge.

Taking down cast iron water mains including burning out joints and recovering lead size of bore 80mm complete all as specified & directed by Engineer-in-charge.

Supplying, and laying and testing in trenches, jointing/ connecting and testing 150 mm bore ductile iron pipe class 'k-7' with spigot and socketed ends, centrifugally cast suitable joint complete, all as specified and directed by Engineer-in-Charge.

Supplying, and laying and testing in trenches, jointing/ connecting and testing 100mm bore ductile iron pipe class 'k-7' with spigot and socketed ends, centrifugally cast suitable joint complete, all as specified and directed by Engineer-in-Charge.

Supplying, and laying and testing in trenches, jointing/ connecting and testing 80mm bore cast iron pipe with spigot and socketed or flanged ends, joint complete, all as specified and directed by Engineer-in-Charge.

Refixing and laying cast iron pipes with spigot ends size of 150mm after cleaning and laying in existing trenches etc complete, all as specified and directed by Engineer-in-Charge.

Refixing and laying cast iron pipes with spigot ends size of 100mm after cleaning and laying in existing trenches etc complete, all as specified and directed by Engineer-in-Charge.

Refixing and laying cast iron pipes with spigot ends size of 80mm after cleaning and laying in existing trenches etc complete, all as specified and directed by Engineer-in-Charge.

Supplying and laying synthetic Rubber insulated mats 2.0 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed by Engineer-in-Charge.

Taking out existing GI tubing 80 mm with all fittings complete all as specified & directed by Engineer-in-charge.

Taking out existing GI tubing 50 mm bore with all fittings complete all as specified & directed by Engineer-in-charge.

Taking out existing GI tubing 40 mm bore with all fittings complete all as specified & directed by Engineer-in-charge.

Taking out existing GI tubing 25 mm bore with all fittings complete all as specified & directed by Engineer-in-charge.

Taking out existing GI tubing 20 mm bore with all fittings complete all as specified & directed by Engineer-in-charge.

M&L for drilling and tapping cast iron water maing (in any position) for branch connection of the internal dia 20 mm bore all as specified and directed by Engineer-in-Charge.

Supply & fixing for galvanised iron tubes of size 80mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed by Engineer-in-charge.

Supply & fixing for galvanised iron tubes of size 50mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed by Engineer-in-charge.

Supply & fixing for galvanised iron tubes of size 40mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed by Engineer-in-charge.

Supply & fixing for galvanised iron tubes of size 25mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed by Engineer-in-charge.

Supply & fixing for galvanised iron tubes of size 20mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed by Engineer-in-charge.

Refixing and laying 80 mm bore in the same location after cleaning with de-scaling solution including cutting defective pipe and cutting, threading and repalcement of new fittings such as socket, bend, elbow, union & upto 30 cm nipple of same size of GI Pipe etc. complete all as specified & directed by Engineer-in-charge.

Refixing and laying 50 mm bore in the same location after cleaning with de-scaling solution including cutting defective pipe and cutting, threading and repalcement of new fittings such as socket, bend, elbow, union &upto 30 cm nipple of same size of GI Pipe etc. complete all as specified & directed by Engineer-in-charge.

Refixing and laying 40 mm bore in the same location after cleaning with de-scaling solution including cutting defective pipe and cutting, threading and repalcement of new fittings such as socket, bend, elbow, union & upto 30 cm nipple of same size of GI Pipe etc. complete all as specified & directed by Engineer-in-charge.

Refixing and laying 25 mm bore in the same location after cleaning with de-scaling solution including cutting defective pipe and cutting, threading and repalcement of new fittings such as socket, bend, elbow, union &upto 30 cm nipple of same size of GI Pipe etc. complete all as specified & directed by Engineer-in-charge.

Refixing and laying 20mm bore in the same location after cleaning with de-scaling solution including cutting defective pipe and cutting, threading and repalcement of new fittings such as socket, bend, elbow, union & upto 30 cm nipple of same size of GI Pipe etc. complete all as specified & directed by Engineer-in-charge.

Taking out old US sluice valves 150 mm from valve pit chamber and refixing after repair of spindle and check nut at lath shop ,refacing & regrinding the same and refix its original position complete all as specified and directed by EIC. Note : rate of nut bolts and rubber gasket for fixing shall be include in quoted rates.

Taking out old US sluice valves 100 mm from valve pit chamber and refixing after repair of spindle and check nut at lath shop ,refacing & regrinding the same and refix its original position complete all as specified and directed by EIC. Note : rate of nut bolts and rubber gasket for fixing shall be include in quoted rates.

Taking out old US sluice valves 80 mm from valve pit chamber and refixing after repair of spindle and check nut at lath shop ,refacing & regrinding the same and refix its original position complete all as specified and directed by EIC. Note : rate of nut bolts and rubber gasket for fixing shall be include in quoted rates.

M&L for Cutting cast iron pipes and reducing to required length before laying of size 150mm complete, all as specified and directed by Engineer-in-Charge.

M&L for Cutting cast iron pipes and reducing to required length before laying of size 100mm complete, all as specified and directed by Engineer-in-Charge.

M&L for Cutting cast iron pipes and reducing to required length before laying of size 80mm complete, all as specified and directed by Engineer-in-Charge.

Repairs to leakage run lead joint in any position of size 150mm CI/DI pipes by burning out existing joints,recovering lead, cleaning internal surfaces of socket and providing new joints with using recovered lead and additional new lead, making joint leak proof.(Excavation of Earth work shall be measured and paid seperately) complete all as specified and directed by Engineer-in-Charge.

All as per item No 36 above but Size of CI/DI pipe 100mm

All as per item No 36 above but Size of CI/DI pipe 80mm

Repairs to leakage run rubber gasket joint for 150mm bore flanged pipes and fittings including necessary fittings such as bolts, nuts, washers, white lead or mineral oil complete all as specified and directed by Engineer-in-charge.

All as per item No 39 above but Size of GI/CI/DI pipe 100mm

All as per item No 39 above but Size of GI/CI/DI pipe 80mm

Supplying, febricating and fixinging MS framed grills,gratings, framed guard bars,ladder, framework of Valve pit cover, water tanks etc, or similar work as ordered and febricated from MS rolled section of any size and shape as directed and fixed at position with all fixing accessories complete all as specified and directed by Engineer-in-Charge. (Fixing of MS sheet where required shall be measured and paid seperately)

M & L for MS plate /sheet plain or chequered, 3.00 mm thick cut to pieces as required and fixed to MS frame work by means of Electric arc/gas welding all as directed and directed by Engineer-in-Charge.

Supply & fixing for cast iron fitting upto 150mm bore such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, 'Y' junction, double branch, cross collar, caps and plugs etc. suitable for spigot and socketed pipes including taking out the defective one form the trenches or ground all as specified and directed by Engineer-in-charge.

Supply and fixing for cast iron sluice valve suitable for 150mm bore pipe with flanged ends drilled ISI marked class PN-1.6 conforming to IS- 14846 with stainless steel spindle, CI gate with brass nut, bolt, washer and rubber packing for connecting pieces etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing for cast iron sluice valve suitable for 100mm bore pipe with flanged ends drilled ISI marked class PN-1.6 conforming to IS- 14846 with stainless steel spindle, CI gate with brass nut, bolt, washer and rubber packing for connecting pieces etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing for cast iron sluice valve suitable for 80mm bore pipe with flanged ends drilled ISI marked class PN-1.6 conforming to IS- 14846 with stainless steel spindle spindle, CI gate with brass nut, bolt, washer and rubber packing for connecting pieces etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing for cast iron non return valve with GM sheet and flap of size 150mm bore flanged ISI marked including bolts nuts, washer and rubber gasket etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing for cast iron non return valve with GM sheet and flap of size 100mm bore flanged ISI marked including bolts nuts, washer and rubber gasket etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing for air release valve cast iron with double air valve 80/100/150 mm bore etc complete all as specified and directed by Engineer-in-charge.

Supply & fixing in replacement gun metal globe or gate valve 20mm bore with iron wheel head screwed both ends for iron pipes complete, all as specified & directed by Engineer-in-charge.

Supply & fixing in replacement gun metal globe or gate valve 25mm bore with iron wheel head screwed both ends for iron pipes complete, all as specified & directed by Engineer-in-charge.

Supply & fixing in replacement gun metal globe or gate valve 40mm bore with iron wheel head screwed both ends for iron pipes complete, all as specified & directed by Engineer-in-charge.

Supply & fixing in replacement gun metal globe or gate valve 50mm bore with iron wheel head screwed both ends for iron pipes complete, all as specified & directed by Engineer-in-charge Note - Serial No.45 to 54 Make - L&T/Minar/Bir/Kirloskar/Sant

Demolition of brickwork or stone/ boulder masonary, built in lime motor incl all quoins, arches, pillers etc. of any description and in any position, removing demolished material from site, complete all as specified and directed by Engineer-in-Charge.

M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius and built in cement morter 1:4 as in repair/raising /making of valve pit chamber complete all as specified and directed by Engineer-in-Charge.

Cleaning, grass cutting and removing of dust, raw materials of sourrounding area of installation/ overhead tank,panels complete all as specified and directed and directed by Engineer-in-Charge.

S&F for over load relay 0 to 63 Amps 415 V.

S&F for contactor ML-3, 415V .

S&F for single phase preventor VSP-3 .

S & F for star delta timer ETR.

S & F for MPCB 0 to 63 Amp 3 Phase

S & F for voltmeter 0 to 500 Volt 96 x96mm square 415 volt.

S & F for ampre meter 0 to 200 amp 96x96mm with CTs square.

S&F in replacement of phase indicating lamp complete.

Lifting of complete submersible pump set of any make & capacity from the tube well 300/200 mm dia along with connected accessories such as column pipe of 100/80 mm dia approx 50m length, submersible cable, nut bolts etc. complete all as specified and directed by Engineer in Charge.

Transportation of submersible pump set 3 phase any make and capacity 25/30 HP from pump house & other location at CG Complex,Doraha & Phillour to contractor's workshop at Ludhiana for carryout necessary repair work of submersible pump set and transporting it back to site after repair complete all as specified and directed by Engineer-in-Charge.

Dismantling of submersible motor of any make of capacity 25/30 HP and reassembling complete set after carryout necessary repair work & testing complete for smooth functioning to the entire satisfaction of EIC. Note - New spare parts/components shall be measured and paid separately under supply only.

Rewinding of submersible motor of any make & capacity 25/30 HP by using existing size and gauge of PVC insulated single core copper conductor submersible winding wire including all insulated material complete all as specified and directed by Engineer-in-Charge. Make- Usha/Devidayal/SI.

Supply only of the following parts of Submersible pumpset of capacity 20 HP to 50 HP

Supply only upper & lower housing bushes consisting of 3 Nos gun metal bushes complete.

Supply only of stainless steel sleeves consisting 3 Nos bushes.

Supply only 'O' ring kit and oil seal kit.

Supply only thrust bearing exel (carbon) for 25/30 HP.

Supply only of thrust bearing plate.

Supply only sand guard gun metal.

Supply only of water seal.

Repair to bowl bush with housing by proper lath machine work milling of pump saft & replacement of bowl bush complete all as directed.

Supply only gun metal bush of the pump set.

Supply only gun metal impeller bush.

Supply only neck ring of impeller.

Supply only key for impeller.

Supply only impeller gun metal suitable for pump set.

Supply only pump shaft made out of (stainless steel ) for pump assembly.

M&L for painting to pump set of capacity 20 to 50 HP with two coat of synthetic enamel paint complete all as directed by Engr-in-charge..

S&F rubber packing 3.0 mm thick consisting of 8/6 hole for 80/100mm to 150mm column pipe complete all as specified and directed by Engineer-in-charge.

Lowering, connecting, testing, commissioning of repaired pump set of any size & capacity upto 25/30 HP 3 phase 400 to 440 Volts into tube well 300/200mm size along with connected items such as column pipe (100 to 150mm ) dia, tightening of nut bolts submersible cable etc complete all as specified and directed by Engineer in charge.

Lifting of complete submersible pump set of any make & capacity upto 7.5/5 HP from tube well along with connected accessories such as column pipe of approx 50m length, submersible cable, nut bolts etc. complete all as specified and directed by Engineer in Charge.

Transportation of submersible pump set 3 phase any make and capacity 0.5 to 5 HP from pump house & other location at CG Complex,Doraha & Phillour to contractor's workshop at Ludhiana for carryout necessary repair work of submersible pump set and transporting it back to site after repair complete all as directed by Engr-in-charge..

Dismantling of submersible motor of any make of capacity 0.5 to 7.5 HP and reassembling complete set after carryout necessary repair work & testing complete for smooth functioning to the entire satisfaction of EIC. Note - New spare parts/components shall be measured and paid separately under supply only.

Rewinding of submersible motor of any make & capacity 0.5 to 7.5 HP by using existing size and gauge of PVC insulated single core copper conductor submersible winding wire including all insulated material complete . Make- Usha/Devidayal/SI.

Supply only of the following parts of Submersible pumpset of capacity 0.5 HP to 7.5 HP

Supply only upper & lower housing bushes consisting of 3 Nos gun metal bushes complete.

Supply only of stainless steel sleeves consisting 3 Nos bushes.

Supply only 'O' ring kit and oil seal kit.

Supply only thrust bearing exel (carbon) for 0.5 to 5 HP.

Supply only of thrust bearing plate.

Supply only sand guard gun metal.

Supply only of water seal.

Repair to bowl bush with housing by proper lath machine work milling of pump saft & replacement of bowl bush complete all as directed.

Supply only gun metal bush of the pump set.

Supply only gun metal impeller bush.

Supply only neck ring of impeller.

Supply only key for impeller.

Supply only impeller gun metal suitable for pump set.

Supply only pump shaft made out of (stainless steel ) for pump assembly.

M&L for painting to pump set of capacity upto 5/7.5 HP with two coat of synthetic enamel paint complete all as directed by Engr-in-charge.

Lowering, connecting, testing, commissioning of repaired pump set of any make & capacity upto 5/7.5 HP into tube well of any size along with connected items such as column pipe,tightening of nut bolts submersible cable etc complete all as specified and directed by Engineer in charge.

Dismantling of CF pump of any make of capacity 0.5 to 5 HP and reassembling complete set after carryout necessary repair work & testing complete for smooth working to the entire satisfaction of EIC. Note - New spare parts/components are replaced shall be measured and paid separately.

Opening, and disassembling CF pump from electric motor 5 HP capacity, including shifting, transportation, overhauling shaft metering, welding , brazing and grinding the shaft and replacing of worn out parts and re-assembling and connecting it to the electric motor complete all as directed by EIC. Note : (i) The unit rate shall include for minor spares such as bolts, nuts washers, oil seal, gasket, greasing etc as required. (ii) Major spares as required shall be measured and paid for separately.

Rewinding of electric motor of capacity upto 5 HP for centrifugal non clog pumping set with supper enameled copper winding wire of existing gauge, size and weight with insulating material, all as specified.

Supply & fixing in replacement Ball bearing of electric motor upto 5 HP capacity.

Jointing the submersible cable with wiring of motor by means of jointing material & making the leak proof joint complete all as specified and directed by EIC.

M&L for disconnecting water & electric connections and taking out existing chlorination pumping set, transporting & servicing of the pump and motor at manufacturer's authorised workshop, bringing back the pumping set at original location, reconnecting and testing the same complete all as specified and directed by EIC . Supply and replacement of defective parts required to be replaced shall be measured and paid separately under appropriate item of this schedule.

Supply and replacement of following parts of chlorination pumping set pump and motor of capacity 180 watts :-

Suction valve assembly

Injector valve assembly

Dosing head assembly

FRP container of capacity 150 ltr

Ram assembly Injector valve assembly

Double ball valve

S&F for calcium hypochlorite having 60% to 70% available chlorine must contain appropriate quantities of dispersants/corroson inhibitor to prevent encrustation/scaling in distribution system note contractor supplier must submit govt lab test report of calcium hypochlorite alonbgwith each delivery packed in 45 KG plastic drum complete all as specified & directed by Engineer-in-charge.

Supply and replacement of 1100 volts grade heavy duty PVC insulated flat submerssible cable 16 sqmm, 3 core with copper conductor completeall as specified & directed by Engineer-in-charge.

Supply and replacement of 1100 volts grade heavy duty PVC insulated flat submerssible cable 6 sqmm, 3 core with copper conductor completeall as specified & directed by Engineer-in-charge.

Supply and fixing in replacment of MS column pipe medium grade of size 100 mm dia 3 m long of each piece flanged ends and slot made for submersible cable as in replacement completeall as specified & directed by Engineer-in-charge. Note :- Spare as nut bolt, rubber seal shall be include in quoted rates.

Repairs to leakage run rubber gasket joint for 100/150mm bore flanged pipes,overhead tank and fittings including necessary fittings such as bolts, nuts, washers, white lead or mineral oil complete all as specified and directed by Engineer-in-charge.

Supply only water TDS meter electronic digital type complete all as specified and directed by Engineer in charge.

Supply and replacement of Computerised Distribution chart in r/o sub station with clear glass cover & wooden frame complete all as specified and directed by Engr-In-Charge. Note :- Rough distribution sketch to be given by Dept.

Supply & replacement of name board with in built LED lights of r/o Pump houses with fitted required height of angle iron complete all as specified and directed by Engineer-in-charge.

M&L for pressure gauge for pump at pump houses / tubewell complete all as specified and directed by Engineer in charge.

M&L for writing letter for figures over RCC OH tank surface or iron surface (block, roman, or italic n.exc 90cm height) complete all as specified and directed by Engineer-in-Charge.

M&L for Cleaning,painting of Overhead tank out and in side,Painting to raising/deleivery/wash out/over flow CI/GI pipe line 150 mm dia Over Head reservoir (RCC) as per existing colour (Apex) code including preparation of old surface of painting with one coat of synthetic enamel paint from ground level to bottom of the dome of the tank complete removing all scale & dirt from bottom & walls and from mouth of circulation pipes of overhead tank of capacity 50,000 gallons at staging height exceeding 15 metre and not exceeding 21.5 metre and disinfecting chemical the same using disinfecting chemical (chlorine) complete all as specified & directed by Engineer-in-charge. Note :- The rate quoted shall be deemed to include the cost of neccessary scaffolding,supports, safety device etc.Appx paint for RCC tank & structure and inlet & outlet pipe syenthic enamel paint.

Cleanning of UG static water tank of approximate capacity up to 20000 gallons in domestic area after dewatering the tank using diesel engine pump sets and cleaning with a steel wire brush, removing mud, sludge, foreign articles, ulgi etc and sand upto bottom level and wash with bleaching powder solution and applying one coat of white wash inside of tank including writing date of cleaning with while colour over black colour base of synthatic enamel paint, and all as specified and directed by Engr-in-charge for the Note : 1. Sludge /waste material shall be thrown away from SWT premises where directed by Engr incharge . Note :- The rate quoted shall be deemed to include the cost of neccessary scaffolding,supports, safety device etc.Appx paint for RCC tank & structure and inlet & outlet pipe syenthic enamel paint.

Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces with CM 1:4 complete all as specified & directed by Engineer-in-charge.

M& L for 80mm thick interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M- 35 grade as approved by engr-in-charge laid in flooring and joints filled/ broomed with fine send at power house/ pump house panel area complete all as specified & directed by Engineer-in-charge.

M&L for sand filling under interlocaking tiles complete all as specified and directed by Engr-in-charge.

Demolition of plain cement concrete of any description and in any position, removing demolished material from site, complete all as specified and directed by Engr-in-charge.

M & L for plain cement concrete (PCC) 1 : 2 :4 type B2 using 40mm stone aggregate, as in repairs to Valve pits / disturbed hard standing/ road or any other repair as required at site at any situation all as specified as directed by Engr-in-charge.

Supply , fixing, testing and commissioning electonic water level indicator device sensor system with LED , 10 level showing water level in cm/mtr (before overflow) as per predetermined limits and power failure , complete all accessories complete all as specified & directed by Engr-in-charge.

Supply and fix for mechanical split coller joint including follower gland, gaskets,nuts and bolts for MJ ends of size 150 mm for repairs to CI / DI pipeline damaged during breakdown all as specified and directed by Engr-in-charge.

Supply and fix for mechanical split coller joint including follower gland, gaskets,nuts and bolts for MJ ends of size 100 mm for repairs to CI / DI pipeline damaged during breakdown all as specified and directed by Engr-in-charge.

Supply and fix for mechanical split coller joint including follower gland, gaskets,nuts and bolts for MJ ends of size 80 mm for repairs to CI / DI pipeline damaged during breakdown all as specified and directed by Engr-in-charge.

Supply and fixing in replacement automatic star-delta starter in sheet metal enclosures, 415 volts, 3 phase, 50 Hz type ML-3 with overload relay range 36-60 Amp suitable upto 35 HP electric motor all as specified and directed by Engineer-in-charge.Make:-L&T/Hager/Schenider.

Supply and fix in replacement fully automatic Auto start Direct on Line starter in SS (stainless Steel)enclosure with 230-400 V Coil Overload relay range 6.0/9.3/3.8 A Back up Fuse (A)25 suitable for Submersible motor capacity 0.5 HP to 7.5 HP electric motor all as specified and directed by Engineer-in-charge.Make:-L&T/Hager/Schenider.

Supply only stequa purity verifier 41021 (chlorine and PH verifier test kit for water).

Testing portability of water by chemical analysis as per IS- 10500 such as PH value, dissolved solids, hardness as CaCO3, calcium, magnesium, chlorides, sulphates, nitrate, alkalinity, iron, turbidity NTU, mineral oil, colour hazen units, taste, odour, residual free chlorine, total coliform per 100ml (microbiological test) & E coli per 100ml (microbiological test) as well as bacteriological portability from any Govt. Laboratory or any NABL accrediated Lab complete all as specified & directed by Engr-in-charge. Note:- The cost of sampling, transporation and testing charges shall be born by the contractor.

Supply and Fix for MCCB 125 Amp, 415 V, 16 KA, 4 pole with adjustable thermal magnetic release complete all as specified & directed by Engr-in-charge.. Make: L&T/Indoasian/Havells

Supply and Fix for MCCB 100Amp, 415 V, 16 KA, 4 pole with adjustable thermal magnetic release complete all as specified & directed by Engr-in-charge.Make: L&T/Indoasian/Havells

Supply and Fix for off load Changeover Switch 63 A, 4P 415 V with enclosure complete all as specified and as directed by engr in-charge.Make: L&T/Indoasian/Havells

Supply and Fix for off load Changeover Switch 100 A, 4P 415 V with enclosure complete all as specified and as directed by engr in-charge.Make: L&T/Indoasian/Havells

Supply and fixing of LED building security lights to be installed at pump house building or OHT of 25 watt with power factor 0.95 (minimum) epoxy powder coated pressure die-cast aluminium housing watt standard size, heat resistant toughened clear glass/transperent polycarbonate sheet, electronic driver in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening with IP-65/66 or above complete all as specified and directed by Engr-in-charge. (Havells-ENDURASUNDOWNSL25WLED765PASYBOTGIHD) Note :- fixing clamp/bracket and connecting wire 0.5 sq mm of 1.5 mtr length shall be deemed in quoted rate.

Supply and fixing of LED flood light 200 watt to be installed at pump house area, housing having protection against over voltage, short circuit and open circuit and surge protection against lightening with IP-65/66 or above complete all as specified and directed by Engr-in-charge. (Havells -JETASTURDYFL200WLED757SSYMLTG)

Re-Development and stabilzing of tube well in accordance with IS : 2800 (part I) and IS: 11189 , to establish maximum rate of usable water yield without sand content (beyond permissible limit), with air compressor of capacity 550 cfm at 600, operation for PSI, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, collecting water samples & getting tested in NABL approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and complete all as specifed of Engineer-in-charge. Note :- The rates shall be inclusive of hiring of air compressor/ fuel required, special tools/ accessories, transportation of the same, disposal of discharged water including labour charges for specialy trained man poower for the work of disiliting of borewell.

M&L for earthing complete for LT Panels/ Feeder Pillars with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than 2.25 metres below normal ground level with top edge of the plate at a depth not less than 1.5 metres below normal ground level, connected with and including GI strip 32mm x 6mm and including GI pipe 50mm bore light grade as protection pipe (from top of earth plate up to the test point) by means of GI bolts, nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe medium grade with funnel and wire mesh, PCC chamber of size 300x300x300mm(top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate of 25mm thick with 2 nos MS handles of 12mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 5 of SSR Part-I (2009) testing on completion complete all as specified. Note : 1. If result is not satisfactory then contractor will do the on other location without any extra cost.

Supply and fixing for isolator TPN 40 A, 415 V, 16 KA all as specified and directed by Engr-in-charge.

Supply and fixing for isolator TPN 63 A, 415 V, 16 KA all as specified and directed by Engr-in-charge.

Boring under road/path/hard standing by mechanically or manually to pass the Pipe lines upto 150mm dia bore with the own arrangement of T&P complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacment of MS column pipe medium grade of size 80 mm dia 3 m long of each piece flanged ends and slot made for submersible cable as in replacement complete all as specified and directed by Engr-in-charge. Note :- Spare as nut bolt, rubber seal shall be include in quoted rates.

Suuplying and fixing in replacement hexagonal head bolt/ nut/washers of any size any type as per existing or site reqd complete all specified and directed by EIC

M& L for pouring pea gravells of size of 2-3 mm around the line assmebly as per site requirement including continuous watering during development of bore welll compete all as specified by Engr-in-charge.

M& L for painitng as per exisiting of LT panel installed at water supply installations after removing scraping rusted body using emary paper, welding of borken covers, applying initial coat of red oxide primer & and after two coat of emulsion paint Complete removing and re fixning of electrical connection as per specified and as directed by Engr-in-charge.

Supply in repalcement of hand wheel accutator size of 80 mm/100mm/150 mm complete as specified and directed by EIC.

Supply and fixing in replacement fo power contractor 4 pole , 63 Amp 415 V complete all as specified and as directed by Engr-in-charge.make havells item code -IHPB040100.

Supply and fixing thermal over load realy 3 pole to 30-40 A all as specified and as directed by Engr-in-charge.

Supply only gland packing rope style 310/350 for locking leakage in sluice valve size 80/100/150 mm as specified by Engr-in-charge.

S&F for first Aid chart with clear glass cover & wooden frame.

All as per item No 133 above but shock treatement chart.

Supply Only First Aid Kit box No-08 (Size : 360 mm x 150 mm x 80 mm) containing following items Make-SWATI (a) Dettols bottle100 ml 02 bottles (b) Antiseptic Ointment 100 mg (c) Crocin tabletes 01 strips ( containings 10 Tablets each). (d) Hydrogen peroxide 50 ml 01 bottle (e) Cotten small rolls 2 Nos (f) Cotten strip small roll 04 Nos (g) Moove tube 01 Nos (h) Betadine Tube 100 mg

Supply only tinned copper fuse wire 26-28 SWG of current rating of fuse 12 to 14 amp & approximate fusing current of 18-28 amp with weight 126-127 gram.

PARDEEP CONSTRUCTION COMPANY