Eco-lodge Idukki additional work III ( Construction of Modular kitchen, Drainage, Parking Yard, Side wall, woodwork polishing, Electrical works and Generator Room)

Amount

Drainage

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

od51950/2021_2022 : Providing weep holes using PVC 75mm dia pipe including all cost of materials and labor charges etc. complete.

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

PARKING YARD

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

16.78.1 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30

od51970/2021_2022 : Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm stone aggregate, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

4.3.2 : Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

SIDE WALL

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

4.3.2 : Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

HAND RAILS

10.26.3 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

9.7.7.1 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Float glass panes4 mm thick glass pane

OUTSIDE POLISHING

od52056/2021_2022 : Labour for cleaning

od55105/2021_2022 : Sanding up of existing wooden surface and applying 3 coat of Imperia sealer and 3 coat of imperia P.U. matt on wooden panels.

MODULAR KITCHEN

od58940/2021_2022 : Supplying, providing and fixing stainless steel three sink unit of size 1.60m × 0.60m × 0.85m having bottom cross support and over head plate rack, and all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od58941/2021_2022 : Supplying ,providing and fixing stainless steel draining table of size 0.45m × 0.60m × 0.85m with one under shelf and bottom cross support, including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od58942/2021_2022 : Supplying ,providing and fixing stainless steel charcoal operated tandoor oven of size 0.60m × 0.60m × 0.90m including clay pot with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od58943/2021_2022 : Supplying ,providing and fixing 20L wet grinder with stainless steel body including all its fixing including all its conveyance and placing at a suitable location instructed by the engineer in charge.<br>

od58944/2021_2022 : Supplying,providing and fixing stainless steel single sink unit of size 0.60m × 0.60m × 0.85m with sunken top including bottom cross support and all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od58945/2021_2022 : Supplying, providing and fixing stainless steel bainmaire counter of size 1.80m × 0.65m × 0.85m with 6 nos of 1/2 gn pan, 1 under shelf, 2 over shelves and three sides covered, including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od58947/2021_2022 : Supplying and providing stainless work table of size 0.45m × 0.60m × 0.85m with a bottom shelf at a distance of 0.45m from the table top, including all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od64002/2021_2022 : Supplying and providing stainless steel work table of size 1.35m × 0.60m × 0.85m with 2 bottom shelves, including all its fittings, conveyance and placing at a suitable location instructed by the engineer in charge.

od64126/2021_2022 : Supplying, providing and installing stainless steel 2 door frost free vertical freezer of capacity 600L with Body crafted with stainless steel 304, Copland emerson compressor, Digital processing controller, ¾ hp compressor, 220v, 1ph, 2 Doors, Temp. range -15 to -20 with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od64127/2021_2022 : Supplying ,providing and installing stainless steel 2 door vertical chiller of capacity 600Litres with Body crafted with stainless steel 304, Copland emerson compressor, Digital processing controller, ½ hp compressor, 220v, 1ph, 2 Doors, Temp. range +02 to +06 with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od64319/2021_2022 : Supplying , providing and fixing stainless steel pot wash sink of size 1.00m × 0.60m × 0.30m having bottom cross support and over head plate rack, and all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od64397/2021_2022 : Supplying and providing stainless steel chute table of size 1.20m × 0.60m × 0.85m with 1 no. chute hole at the centre, bottom cross support and all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od66351/2021_2022 : Supplying and fixing three phase 1440rpm, 1 Hp axial fan with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od66354/2021_2022 : Supplying ,providing and fixing stainless steel three burner unit of size 1.65m × 0.60m × 0.85m with 3 nos of hp burner, one under shelf, Needle Control Valve, Copper Pigtail, drainage trap, waste collecting tray, and all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od66357/2021_2022 : Supplying and installing LPG pipe line with ½”TATA MS - C class pipe (3 + 3 man folding systems - total 6 cylinders), With DBC Click on adaptor, HP regulator, Connector, shut off valves, Unit Valves With frame connector, Pressure Gauge and Clamps. Including the Charge for pipe bending, Welding, painting, Pressure Testing and Labour charges guage, connecting pipes for burners etc. (charges including one year warranty ) including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od69276/2021_2022 : Supplying ,providing and fixing GI Ducting for SS Hoods with 22 swg ,GI sheet including hanging rods, scaffolding charges and labour charges etc with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od69277/2021_2022 : Supplying , providing and fixing exhaust hood of size 1.80m × 0.90m × 0.45, using 22SWG 304 S S Sheet and filters with26 SWG 304 S S Sheet, with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

od69278/2021_2022 : Supplying ,providing and fixing wall type hanging hood for hot plate/dosa plate of size 1.20m × 0.90m × 0.45m, using 22SWG 304 S S Sheet and filters with 26 SWG 304 S S Sheet, with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

ELECTRICAL WORKS

1.12 : Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

od69175/2021_2022 : SITC of Ceiling mounted, Chandelier hanging light ,Elegant design with antique bronze finish. Superior glass diffuser to minimize glare, Recommended to use with energy saving lamps, 5 x 7.5 W A60 LED filament lamp, IP rating 20, Lamp base E27. (Havells ORNALITE CHANDELIER 1 X 5LS E27 BRZ or equivalent)

od69274/2021_2022 : Supply, conveyance , installation, testing and commissioning of Ornamental ceiling fan of wooden finish with 1050 mm (or higher) sweep complete with 1500mm down rod, canopies, shackles and blades using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round conductor flex wire or with extended original wiring etc – Make- Usha /equivalent

od68879/2021_2022 : Supply, Installation, testing and commissioning of 30KVA, silent type, water cooled, radiator type, electric start DG set with acoustic enclosure and standard control panel. The engine shall be capable of taking 10% overload for one hour after 2 hours of operation, with AMF panel. Alternator- brushless, self excited, self regulated, class H insulation, suitable for continuous operation at 1500rpm generating 415V +/-5V at 0.8pf, 50Hz 0.85 load factor 3phase, 4 wire system. <br>Baseframe- formed sheet channel, sturdy welded construction for mounting engine, Alternator and Acoustic enclosure

od69168/2021_2022 : SITC of Solar LED lighting System with following accessories. (a) All in one Solar LED CSADHMP40 CDL, 40W LED Crompton make / Equivalent having 60W solar module Wp with 27 Ah battery having 6800lumens having dimensions (Approx) 955 X 630 X 55 (LWH) having approximate weight of 19Kg suitable to fit on tubular pole. (b) Pole :- 3.5/4 Mtr. long (clear height -210kg) armless pole of cast iron with bottom dia.200mm with base plate and top dia. 100mm, foundation bolt etc. complete fixed on exsisting cement concrete foundation etc. as per the directions of engineer at site as required including 3 year AMC complete.

GENERATOR ROOM

2.3.1 : Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead up to 50 m and lift up to 1.5 m :All kinds of soil

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

12.49 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

CIVIL WORK FOR LAMP POST

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

SAAJCONSTRUCTIONS

Outlook Communications (P) Ltd

AAYKAYCONSTRUCTIONS

Bidder Name

M/S V J RAJU AND CO

AAYKAYCONSTRUCTIONS

Outlook Communications (P) Ltd

SAAJCONSTRUCTIONS