Aug of source by construction tube well at Talru Ki bain and improvement distribution system of LWSS Kanaiod-1 Tehsil Sunder Nagar Distt Mandi SH

Amount

Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft orhard rock by chiselling soft/hard rock where blasting is prohibited in all leads and lifts including trimming/dressing of sides and beds stacking the excavated soil clear from the edge of excavation and then returning the excavated soil aftrer completion of work in 15cm layers when required into plinths, sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavatred soil complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:6:12(1cement :6 sand: 12graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Randum rubble masonary polygonal rubble masonary (uncoursed brought to courses in walls with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1cement: 6 sand: 12 graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1cement: 6 sand) in all leads and lifts.

Boulder filling dry hand packed tightly under floors complete in all respect in all leads and lifts.

Brick work using common burnt clay building bricks masonary in super structure above plinth in cement mortor 1:6(1cement :6sand) Ist class bricks

Providing form work with steel plates 3.15mm thick welded with angles iron in frame 30x30x5mm so as to give a fair finish including certring shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ reinforced concrete & plain concrete work in all leads and lifts in:-( a) Beams, cantilivers, girders and lintels sides and soffits of beams, beam haunchings cantilivers , girders and lintels not exceeding 1 metre in depth in all leads and lifts.

(b) flat surfaces such as soffits of suspended floors,roofs, landings and the like in(a) floor etc. upto 2omm in thickness.

(c) Edges of slab and breaks in floors and walls under 20 cm side

Providing and laying cement concrete 1:2:4(1Cement :2 sand:4 graded crushed stone aggregate 20mm nominal size) and curing completre excluding the cost of form work and reinforcement for reinforced concrete work in all leads and lifts in :-(a) RCC Column beams girders etc.

(b) Suspended floors, roofs, landing, shelves and their supports balconies, lintels, beams girders bresmers and cantilevers upto all floor tWo level .

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level in all leads and lifts.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought , framed and fixed in position in all leads and lifts. (a) 2nd class deodar wood.

Providing 40x3mm iron hold fast 40cm long including fixing to frame with 10cm dia bolts, nuts and wooden plugs and embending in CC block 30x10x15cm 1:3:6(1cement :3sand:6 graded stone aggregate 20mm nominal size) within all leads and lifts.

Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including black enamelled iron but hinges with necessary screws(40mm thick) 2nd class dedoar wood in all leads and lifts..

Providing and fixing MS grills of required pattern in wooden frames of windows etc. with MS flats, square or round bar with roundheaded bolts and nuts or by screws (Plain grills)

40mm thick cement concrete flooring 1:2:4(1cement :2sand: 4 graded stone aggregate 20mm nominal size ) based over concrete and finished with a floating coat of neat cement based concrete to be measured and paid for separately in all leads and lifts.

6mm cement plaster to ceiling in cement mortor 1:3 (1cement :3sand) inall leads and lifts.

20mm cement plaster in single coat on rough side of brick/ concrete/ stone walls for interior plastering upto floor two levels including arrises internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) in all leads and lifts.

White washing with lime on undecorated wall surfaces two coats give an even shade including thoroughly brooming the surface to remove all dirt dust and other forign matter in walls in all leads and lifts.

Distempering with dry distemper of approved brand and manufacture (two coats) on of required shade on decorated wall surfaces to give an even shade after thoroughly brushing the surface clean of grease dust, loose, pices of sealed including preparing the surface even and sane papered smooth and one subsequent coat in all leads and lifts.

Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease , dirt and other foreign matters, sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts.

Applying priming coat on new wood preservative on new wood and wood based surface after and including preparing the surface by thoroughly oil grease dirt and other foreign matter, sand papering and knoting in all leads and lifts.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matters sand papering and stopping with readymade paint other than white in all leads and lifts.

Providing and fixing anodized MS sliding door bolts with nuts and nuts screw etc. complete in all leads and lifts.(i) 250x16mm

Providing and fixing anodized MS tower bolts (barrel type) with screws etc. complete in all leads and lifts. (i) 250x10mm

ii) 200x10mm

Providing and fixing anodized MS handles with necessary screws etc. complete in all leads and lifts.(i)125mm

Providing and fixing oxidized M.S. Hooks and eyes in all leads and lifts.(i)250mm

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3 sand: 6 graded crushed stone aggregate 20mm nominal size) in all leads and lifts.

Providing under layer for plinth protection of 75mm thick (unconsolidated )bed dry brick/stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground in all leads and lifts.

Providing and fixing vitreous China wash, down water closet ( European type WC pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1(1cement:1 Sand)( Seat and cover to be measured and paid for seperately) Anglo Indian ( Universal Closet) complete in all respect in all leads and lifts and to the entire satisfaction of Engineer-in-charge .

Providing and fixing 100mm size P or S trap for water closet( squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (1cement:1sand)

Providing and fixing 10.0/12.5/5.0 liter Vitreous China low level flushing cistern with a pair of CI/MS brackets complete with fitting such as lead valve less syphon,15mm nominal size brass ball valve with polygthene float. CP brass handle union and coupling for connection with inlet, Outlet and overflow pipes, 40mm dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistem and closet ( overflow) pipe to be measured and paid for seperately complete in all respect in all leads and lifts and to the entire satisfaction of Engineer-in-charge .

Providing and fixing cast iron spun spigot and socket soil ventilating pipe lead caulked joints to be measured and paid for separately 100mm dia in all leads and lifts.

Providing and fixing sant cast iron spun fitting and accessories (a) Bend of required eegree any radious 100mm

Providing and fixing precast concrete manhole cover & frame confirming to IS: 12593-1988 Part-I and IS 12592-1991, part-II 500mm diameter medium duty.

Wiring for light point/ Fan point/ Exhaust fan/ Call bell point with 1.5 sqmm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5sq.mm HRFRLS/PVC insulated single core copper conductor cable as required (i) Group "C"

Wiring 3 pin 5/6 Amp plug point with 15 sqmm PVC insulated copper conductor cable providing and fixing 3 pin 5 Amp. Switch socket earthing pin etc. as required

Supplying and fixing wooden board size 180mm*100mm*60mm deep size including providing and fixing 3 pin 15 Amp. Socket as required complete in all respect.

Wiring for circuit with 2*1.5 sqmm PVC insulated copper conductor cable in surface PVC earthing or PVC pipe as requred complete in all respect.

Wiring for power plug with 2x4sq.mm PVC insulated head resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit alongwith 1 to 4 Sq.mm HRFRLS/PVC insulated single core copper conductor cable for earthing as required within all leads and lifts as per directioin by the Engineer-in-charge.

Wiring for sub main wiring with 2x6sqmm of PVC insulated copper conductor single core cable in surface/ recessed PVC conduit within all leads and lifts as directed by the Engineer-in-charge.

Supplying and fixing plain pendent/batten holder including connector etc. as required.

Providing, installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length(upto 30 cm) with 1.5 sq.mm PVC insulated copper conductor single core cable etc. as required ceiling fan 1200mm sweep category A of Bajaj, Usha and Khetan make

Providing, installating, testing and commissioning of pre-wired flourescent tube fitting complete with ballast, starter and capacitors but excluding flourescent tube rod, suitable to operate on 230 volts. Single phase AC supply directly on surface with copper wiring as required 1x40 wa.. category "B"

Providing and fixing tube rod 1*40 watt on the exiting tube fixture complete in all respect of Bajaj make

Providing and fixing of street light tube fixture 1x40 watt box Acalylic type cover but without pole as required complete in all respect.

Supplying and erection of bulk head fitting of all size and slopes containing one GLS lamp holder wire guard and lock complete in all respect in all leads and lifts.Cat "B"

Supply and fixing 40 Amp rating double pole 240 Volts. Insulator in the existing MCB DB complete with connection testing and commissioning etc. within all leads and lifts as directed by the Engineer-in-charge.

S/F 5 Amps to 32 Amps rating 240 volts of G series miniature circuit breaker single pole in the existing MCB DB complete with connection testing and commissioning etc. as required category B.

Supplying and fixing 5 Amp to 32 Amps rating 240 voltsG series miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required complete in all respect 16 Amp. Single pole MCB

Supplying and fixing of following way single pole and neutral sheet steel MCB distribution board 240 Volts on surface/ recess complete with tinned copper busher neutral link earth bar din bar detachable gland plate interconnection including painting earthing etc. as required busbar (i) 8 way

Supply and fixing following rating double pole 240 volt. ELMCB combination unit having a sensivity current upto 300 Milli Amp in the existing MCB DB complete with connection, testing as required ELMCB 40 Amp. Havells make.

Earthing with GI earth pipe 4.5 meter long and 40mm dia including accessories and providing masonary conductor with copper plate watering pipe etc. as required complete in all respect but with out charcoal and sale complete in all respect.

Providing charcoat and salt for earthing as required complete in all respect.

Vijay

Ramesh Kumar

Karam Singh

Naresh Kumar

Hukam Chand