Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.2 LAccepted-AOC | 1 | Accepted-AOC L1 accepted | |
| 2 | 2₹7.3 L+₹9,181 (1.27%)Rejected-AOC | 2 | Rejected-AOC L2 rejected |
| Sl No | Description | Qty | Unit | Usman E L1 | Jayachandran M L2 |
|---|---|---|---|---|---|
| 1.00 | 100 mm channel shoulder 2.5 m long | 2.21 | each | 1,500 ₹3,311.1 Lowest | 1,775.9 ₹3,920.12 |
| 2.00 | Adjustable span ESO+SI (2.35-3.40 | 0.4 | each | 2,500 ₹999.25 Lowest | 2,907.52 ₹1,162.14 |
| 3.00 | Adjustable telescopic prop 3 m (2.02-3.75m) | 0.48 | each | 1,500 ₹718.95 Lowest | 1,836.08 ₹880.03 |
| 4.00 | Anjili wood scantl | 0.32 | each | 75,000 ₹23,677.5 Lowest | 82,034 ₹25,898.13 |
| 5.00 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm | 43.06 | 10nos | 12 ₹516.67 Lowest | 13.1 ₹564.03 |
| 6.00 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm | 14.35 | 10nos | 6 ₹86.11 Lowest | 7.67 ₹110.08 |
| 7.00 | Bright finished or black enameled mild steel screws 20 mm | 57.4 | 50nos | 80 ₹4,592.38 | 0.94 ₹53.96 Lowest |
| 8.00 | Bright finished or black enameled mild steel screws 40 mm | 344.44 | 50nos | 1 ₹344.44 Lowest | 1.56 ₹537.33 |
| 9.00 | Coarse sand (zone III) | 36.93 | cum | 3,026 ₹1,11,736.56 Lowest | 3,026.1 ₹1,11,740.26 |
| 10.00 | Corner angle 45x45x5 mm 1.50 m long | 0.48 | each | 1,836 ₹880 Lowest | 1,836.08 ₹880.03 |
Tender Value
₹7.6 L
EMD Value
₹19,000
Closing Date
12 Mar 2025, 3:00 pmClosed
SECRETERY THAVINJAL GRAMAPANCHAYATH OFFICE
SECRETERY THAVINJAL GRAMAPANCHAYATH
MATERIALSUPPLY FOR MGNREGA WORKS WARD 1
2025_DP_745220_1
MGNREWGA2025/5671 W2
Open Tender
Raw Materials
Supply and Service
THAVINJAL GRAMAPANCHAYATH
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,793
Yes
₹19,000
Yes
THAVINJAL GRAMAPANCHAYTH OFFICE
7 Oct 2025
3 Mar 2025
14 Mar 2025
3 Mar 2025
12 Mar 2025
3 Mar 2025
3 Mar 2025 - 5 Mar 2025
3 Mar 2025
Amount
100 mm channel shoulder 2.5 m long
Adjustable span ESO+SI (2.35-3.40
Adjustable telescopic prop 3 m (2.02-3.75m)
Anjili wood scantl
Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm
Bright finished or black enameled mild steel screws 20 mm
Bright finished or black enameled mild steel screws 40 mm
Coarse sand (zone III)
Corner angle 45x45x5 mm 1.50 m long
Double clip (bridge clip)
Fine sand (zone IV)
Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
M.S. Tube 40 mm dia
Portland Cement
Quarry Waste
R.C.C. collars NP2 class 450 mm dia
R.C.C. pipes NP2 class 450 mm dia
Red oxide Zinc chromate primer
Royalty for good earth
Single clip
Stone Aggregate(single size): 10 mm nominal size
Stone Aggregate(single size): 40 mm nominal size
Stone Aggregate(single size):20 mm nominal size
Stone for masonry work
Structural steel such as tees, angles, channels and R.S. joists
Twisted steel/deformed barsQuintel
Vibrator (Needle type 40 mm)
wall form panel 1250x500 mm
Jayachandran M (BID ID -2150658)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1202141.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .