REPAIR TO PATH HARD STANDING FOOT PATH ETC TO VARIOUS LABS AT KWC UNDER GE I RND DELHI

Amount

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

M&L for PCC type B1 1:2:4 (using 20mm graded agg) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apexstone, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Supply and fixing factory made prepolished chequered cement concrete prepolished coloured tiles (300x 300/ 250 x250) x 22 to 25mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:4, complete all as specified and directed.

Material & Labour for 100 mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggt) as in sub base concrete complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completed. Including 20mm thick screed bed or bedding lay in CM 1:6. complete all as specified and directed.

M&L machine cut Granite slab 16 to 18 mm thick fixed as in repairs for dado, wall cladding, garden walls, staircase, steps, pillars,skirting/dado, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish complete all as specified and directed.

M & L for machine made prepolished Rubber moulded precast concrete interlocking paver block (coloured),pre polished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, over and including 25mm average thickness sand cushioning complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc.

M&L for brick work straight or curved on plan exc 6m mean radius in cement mortar (1:4) with Sub class ‘B’ brick including manhole raising, footpath, etc complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster/grit plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on fair faces of new or old brick works or concrete work finished even & smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on other than fair faces of new or old brick work or concrete work, finished even & smooth without using extra cement complete all as specified and directed.

M&L 5mm thick rendering in cement mortar 1:3 on ceiling new or old brick works or concrete work finished even & smooth without using extra cement complete all as specified and directed.

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including using white cement in place of grey cement for grit wash complete all as specified and directed. Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed. Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered or unplastered wall surfaces and applying two coat of acrylic emulsion exterior quality over and including a coat of water based primer complete all as specified. Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building

M&L preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper(white or tinted) over a coat of alkali resistant primer, complete all as specified and as directed.

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper of approved shade/tint over and including one coat of 1 mm thick birla wall care putty to achieve smooth finish complete all as specified & directed.

Material and Labour for preparation of old decorated surfaces of wall (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat distemper oil bound emulsion (white or tinted) on walls complete all as specified and directed.

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including necessary putty work to achieve smooth finish whereever required complete all as specified. Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building.

M&L complete removal of existing treatement on wall surfaces with sand paper, iron patti or grinder, incl pillasters and cornices etc.and applying two coat of interior acrylic emulsion paint over a coat of 1 mm thick birla wall care putty to achieve smooth finish complete all as specified.

M&L complete removal of existing treatement on ceiling surfaces with sand paper, iron patti or grinder, incl pillasters and cornices etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of white wash complete all as specified and directed. Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate.

M&L preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of tint / shade as approved complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamal paint of tint as approved complete all as specified and directed.

M&L for preparing old painted concrete surfaces such as chequered tiles, paver blocks, kerb stones etc and similar surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L preparation of old plastered outer wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (12.5mm graded aggregate) as in plinth courses, copings, parapets, saucers drain, kneelers, apex stones, bed blocks, kerbs, water troughs including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M/L preparing newly concrete surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer.

Excavation in post holes (or similar holes) in soft/loose soil n. exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25 cm, watering and removing surplus soil all as specified.

M & L cement concrete (1:4:8) type E-2 using 40mm graded stone aggregate as in foundation filling, mass concrete and sub floors etc. complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for work including doors, gates, angle post etc complete all as specified and directed.

S & F Framed work as in Mild Steel Gate of angle or other section with gusset plate, rails, braces, stair case, barreled iron doors,ladders; framed balusters; walk ways; railings; framework of water tanks, cover grills and similar work etc Fe.290.Gde-E-165 complete drilled for fixing of steel sheeting or other covering including welding work ,(PCC 1:1.5:3) etc to be prepared for hanging or sliding with and including either hooks,hinges,necessary holdfasts or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing in building upto 8 mtr height complete all as spfd and directed by engr in charge.

S&F Mild Steel work in tubular trusses with round/square/rectangular hollow tubular pipes as in rafters, purlins, columns etc for Shed work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M & L mild steel work for flat iron fillets as in wind ties for roof coverings including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismanteling of Asbestos cement (corrugated semicorrugated etc ) sheets in roof covering complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified & directed by engr-in-charge

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, fixed complete all as specified and directed.

Demolition of Reinforced cement concrete work of any description and in any position not otherwise specifically provided.

M & L RCC type B-1, 1:2:4 (20mm graded stone aggt) for slabs supports on walls, drain covers, drain slabs, shelves and similar work complete all as specified and directed.

S&F of TMT bars 10mm dia and over cut to length bend to shape required including cranking bending and binding with and including mild steel wire not less than 0.9mm dia or securing complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface flat for rough finished surface of concrete complete all as specified.

Use & waste of form work to to edge of concrete flats etc exc 10 cm but not exc 20 cm wide/thick for fair finished surface of concrete complete all as specified and directed.

S&F Factory made precast perforated heavy duty drain/ manhole covers including MS frame plate and including reinforcement as per IS 12592 : 2002 with size 1.00mtr x 0.50mtr x 75mm thickness complete all as specified and directed.

Repairing of rolling shutter push type with necessary repair work of defective parts i.e, re posting of laths, riveting to old defective rivets, tightning nuts and bolts, replacement of spring, greasing to movable parts and at guide channel including taking out and re-fixing rolling shutter for smooth functioning size of rolling shutter n.exc 6sqm each complete all as specified and directed.

S&F in repairs mild steel plain sheets covering to door shutter and top cover of rolling shutter cover cut to size, edges beaded as directed, holes punched complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces as in railing, rolling shutters etc of any description over 10cm width or girth and applying two coat of synthetic enamal paint of tint as approved complete all as specified and directed.

Removing Debris/ demolished materials by mechanical means including loading, transporting, unloading to outside MoD land from 5KM upto 20KM lead at municipal dumping ground complete as per direction.

S&F in repair vertical venetian blinds consisting of Aluminium head rail with vanes/louvers 100 mm wide of approved tint and traverse cord complete fixed in position complete all as specified and directed.

S&F in repair Double roller Zebra venetian blinds consisting of Mounting pelmet assembly of approved tint/shade and traverse coard complete as per manufacturer instruction fixed in position complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L PCC (1:3:6) type C-2, using 40mm graded stone aggregate as in plinth protection 75mm thick laid in bays and surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for joint free glazed coloured ceramic coloured tiles of 300mm x 450mm x 7 to 8mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L non-skid, ceramic coloured tiles 7 to 8mm thick (Square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15mm thick average in cement mortar 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic light shade tiles 8 to 9 mm thick polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick screed bed in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

Supply and fixing as in repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed.

S & F in repairs vitreous china pedastal pattern, "EWC" white with connection to trap, and to flushing pipe anti-syphonage pipe and including sheet cover and CP jet etc. complete all as specified and directed.

S&F in repairs Viterious China urinals, bowl type (back or corner wall type) of size 465X355X265 mm,complete including providing and fixing plugs, bedding urinal against wall in Cement mortar 1:2, securing urinal to plugs with and including 100 mm long brass holdfast, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe,grating and Union for discharge pipe complete all as specified and directed.

S&F in repair complete Urinal sensor kit infrared type based on inbuilt motion sensor including battery/Li ion AA duracel cells suitable for sensor type urinal pot of required size complete fitting for proper functioning all as specified and directed.

S&F in repairs vitreous china Urinal, Half stall type white including connections to flushing pipe and outgoing pipes fixed in repairs complete all as specified and directed.

S&F in repair urinal spreader CP coated for fixing with 15 mm dia PVC connection pipe complete all as specified and directed.

Supply and fixing as in repair PVC valveless syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified & directed.

Supply & fixing as in repair vitreous china wash hand basin, white flat back, size 550mm x 400mm including pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm dia, with fly nuts, pvc waste pipe and MS brackets 25x25x5 mm thick incl cutting for and pining in ends of brackets, fixed as in repairs complete all as specified & directed.

Supply and fixing 15mm dia PVC connection with brass nut, of length 600 mm,fixed as in repairs, complete all as specified and directed.

S&F as in repairs 15mm bore pillar tap fancy type ,quarter turn, long neck,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure,with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

Supply and fixing long body Bib taps,fancy type ,quarter turn, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

Supply and fixing angle stop valve,fancy type ,quarter turn, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

S&F in repairs 15 mm dia stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling porting of the wall as required including making good to match with existing complete all as specified and directed.

S&F as in repairs Chromium plated shower roses 125 mm size fixed with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel box type fixed to wall,with chromium plated brass screws, complete all as specified and directed.

S&F as in repairs 100 mm dia mild steel chromium plated grating fixed as in repairs complete all as specified and directed.

S&F as in repairs chromium plated waste coupling fitting 100mm / 75mm bore pipes to kitchen sinks complete all as specified and directed.

S & F as in repair 32mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed complete all as specified and directed.

S & F as in repair 40mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed all as specified.

S&F in repairs 32mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

S&F as in repairs CP Health faucet with 1.50 Mtr flexible chromium plated tube and hook fixed to angle valve 15mm bore with accessories complete all as specified and directed.

S&F as in repairs Chromium plated jet spray with CP connection pipe for EWC, 15mm bore with fittings, complete all as specified and directed.

Supply and fixing in repairs brass chromium plated tubular towel rail 20mm dia 60 cm long between flanges, fixed to walls with necessary screws complete all as specified and directed.

Supply and fixing in repairs brass chromium plated tubular towel ring having dia of ring not less than 150mm fixed to walls with necessary screws complete all as specified and directed.

S&F in repairs CP brass bottle trap 32 mm dia including joining to waste fitting and waste pipe complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) of size exc 1.5 sqm but not exc 4 sqm and making good to distrubed surface without any extra cost complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5sqm and making good to distrubed surface without any extra cost complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates of size 105x60 mm including necessary fixing lugs, lock strike plate etc complete made out of 1.25 mm thick MS sheet complete all as specified and directed.

Material & Labour for pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate incl necessary fixing lugs, hinges, lock, strike plates welded with frame and making arrangement for fixing of door spring etc complete all as specified and directed.

S & F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and directed.

PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling hollow of pressed steel frame.

S & F factory made solid pannel PVC door shutter 30mm the style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gep insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per spacification and directed.

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and directed.

Material & Labour prepapration of new or previously untreated surfaces of wood or based materials of any description not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint coat complete all as specified and directed.

S&F 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size aluminum handles cast type, anodized complete all as specified and directed.

S&F 250mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.

S&F aluminium section powder coated (powder coating not less than 50 micron thick) grill of size 6 x 4.5 mm thick section 10cm centre to centre spacing fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles complete with U-channel all around fixed in window with screws complete all as specified and directed

S&F anodised aluminium powder coating aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron)frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

S&F anodised aluminium Powder coating door shutters aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron) including necessary joining cleats, glazing clips, ruber neoprene packing , hinges,anodised aluminium snap beading screws,all necessary builders hardware etc complete all as specified and directed.

S&F anodised aluminium Powder coating window and ventilator shutters, side hung type/ sliding type shutter without sash bars aluminium section weighing not less tha 0.55Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150mm long (1no), hinges type B-21 100mm long(2 no.) suitable handle(1 no) including all necessary builders hardare complete all as specified.

S&F 12mm thick particle board exterior grade with decorative prelaminated both sides of approved shades fixed to aluminium shutters/ partitions complete all as specified and directed.

S&F 4.8mm thick sheet glass ordinary quality in Squre/rectangle fixed with glazing pins and rubber beading etc in aluminium door/window/partitions etc complete all as specified and directed.

S&F in repair aluminium anodised fully glazed partly panelled partitions and fixed glazing made out of anodized alum section 63.50x 38.10 x 1.60mm including necessary jointing cleats glazing clips, rubber packing anodised alum snap beading screws etc, frame work fixed to walls , floor and ceiling with rawl plug wherever required complete all as specified and directed. (Sheet glass and particle board shall be measured and paid for separately) Note : area of each panel shall not be exc 01 sqm

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends with rubber ring joints complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, fixed as in repair complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as in repair complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle in each pane fixed with oil putty or epoxy in metal/wooden frames etc complete all as specified and directed.

S&F in repair Mortice lock assembly verticle type with one set of lock Handles for fixing on both sides of wooden flush door, including 4 lever lock of required size complete all as specified and directed.

Dismentling boarding, any description, fixed in any positioin with nails complete all as specified and directed.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking GI metal grid of hot dipped galvanized steel sections consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture having 8 to 10 mm thick square edge PVC Laminated Gypsum board Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings complete all as specified and directed.

M&L for decorative wall panelling with PVC louvered/Fluted/Plain 2D/3D wall panels with plastic and silicate mixture as the core material with inand surface with PVC foil on the top with thickness of panel 10mm to 20mm, width of 150mm to 200mm and length of 2.74/3.05 (9' or 10') meters of POLYWOOD or equivalent brand Wt of PVC pannel is 4.5 kg/sqm and PVC percentage in wall panels is more than 40% including necessary L/H/U corner profile and fillets. WPC Wall panel are termite proof , water proof and usable on the damp walls, fixed to wall/ ceiling surface as per manufacturer instruction complete all as specified and directed by Engr-in-charge.

M&L for decorative solid Wooden Flooring classic series having HDF (high density fiberboard) wood Plank rectangular shape with interlocking pannels with plastic and silicate mixture as the core material with Plank size 1215 x 195 x 8 mm kiln dried and finished with UV coating for durable finish of approved wooden texture and shade over and including laying of necessary form/fiber on floor fixed as per manufacturer instruction complete all as specifed and directed.

S&F L/H/U profile and corner profile molding with fillet at top ,bottom and corner to hold the wooden flooring and wall panelling with exactly the same shade as that of the flooring planks as per manufracturer instruction complete all as specified and directed.

M/L preparing old painted concrete surfaces such as chequerd tiles, paver blocks etc and similar surfaces over 10 cm width or girth and applying two coats of lndigo floor paint over a coat of primer complete all as specified and directed.

m/s Kailash Chander (BID ID -3404820)

DR Buildcon (BID ID -3414581)

Sree Ram Enterprises (BID ID -3405207)

SAWARIYA ENGINEERS AND CONTRACTORS (BID ID -3404609)

KKP Enterprises (BID ID -3413010)