ARC for Civil Maintenance work for Execution of misc. maintenance work for all S/Dn and Division premises of Mandvi Division for the year 2026- 27

Name of work : ARC for Civil Maintenance work for Execution of misc.

maintenance work for all S/Dn and Division premises of Mandvi Division for the

Description Rate Unit

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

Filling in plinth with sand under floors including

3 watering ramming, consolidating and dressing 477.03 CMT

Filling in foundation and plinth with murrum or selected

4 soil in layers of 20cm. thickness including watering, 298.79 CMT

ramming and consolidating etc. complete.

Filling in foundation and plinth with brick Bats Chhara

in layers of 20cm. thickness including watering,

remming and consolidating etc. complete.

Boring holes 3.5 m deep in ordinary soil (for cast in situ

piles) and getting out the soil and disposal of the

6 surplus excavated soil as directed within a lead of 50 1322.40 Each

Meter for following diameter of pipes.(ii) 250 mm

Providing, laying, spreading and compacting graded

stone aggregate to wet mix macadam specification

including premixing the Material with water at OMC in

mechanical mix plant carriage of mixed Material by

7 tipper to site, laying in uniform layers with paver in sub- 1327.00 CMT

base / base course on well prepared surface and

compacting with vibratory roller to achieve the desired

Cutting, pulling out and removing thick jungle

grass,shrubs, bushes and unwanted vegetations/pants

from their roots and up-rooting from the area of Khadi

i.e. natura drain channel or gutter filled-up with

sewage water, earth,coal and storm water including

removing of silted stuff of mud, sewage, earth etc. by

digging or lifting out all materials by engaging

hydraulic excavator of one Cu.M.bucket and dispose off

8 all stuff and cut vegetations as directed by the Engr.-in- 840.00 Hour

charge. Also making sewage & storm water flow in

smooth flowing condition by preparing @ 3.0 mtr wide

channel for the smooth water flow as per the

instruction of the E.I.C. The rate includes all require

dmachineries, tools & tackles, materials, labours,

loading & unloading, transportation, equipments etc.

complete at the risk and cost of the contractor.

Payment will be made for the actual work done hours

at site. Trip (As per requirement)

Demolition & Dismantling

Demolition including stacking of serviceable materilas

10 and disposal of unserviceable materials with all lead 1099.75 CMT

and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

11 unserviceable materials with all lead and lift.(ii) In 572.20 CMT

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materilas

and disposal of unserviceable materials with all lead

and lift.(i) G.I.sheet roofing.

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materilas

14 and disposal of unserviceable materials with all lead 55.57 SMT

and lift.(ii) A.C. sheet roofing.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,

15 holdfasts and other attachment etc. complete and 195.14 Each

stacking them within all lead and lift.(i) Not exceeding

3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,

16 holdfasts and other attachment etc. complete and 261.29 Each

stacking them within all lead and lift.(ii) Exceeding

Dismantling santtary fittings like wash basin . W.C. pan

17 Indian and European type, flushing tank etc. including 421.71 Each

stacking the materials with all lead and lift.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water

18 pipes with fittings and clamps including stacking the 78.06 RMT

materials with all lead and lift ( for any dia, of pipe)

Scraping oil paint from steel and other metal surface

19 and making the surface even (with Hand Scraping.) 51.27 SMT

Providing and laying cement concrete 1:3:6 (1-Cement

: 3- coarse sand : 6- hand broken stone aggregates

20 mmnominal size) and curing complete excluding cost of 3064.60 CMT

formwork in (A) Foundation and Plinth

Providing and laying cement concrete 1:2:4 (1-Cement

: 2- Coarse sand : 4- graded stone aggregates 20 mm

21 nominal size) and curing complete excluding cost of 3704.64 CMT

formwork in (A) Foundation and Plinth

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates

20 mm nominal size) exposed work with curing

22 etc.complete including the cost of formwork but 7380.23 CMT

excluding the cost of reinforsement for R.C.C work in

(iii) Slabs having more than 10cm and upto 13 cm.

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates

20 mm nominal size) and finishing smooth with,curing

23 etc. complete including the cost of formwork but 7589.70 CMT

excluding the cost of reinforcement for R.C.C work in

(A) BEAMS :(ii)Having cross-sectional area more than

0.08Sq.M and upto 0.12 Sq.M

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates

20 mm nominal size) and finishing smooth with,curing

24 etc. complete including the cost of formwork but 10448.71 CMT

excluding the cost of reinforcement for R.C.C work in

(B) COLUMNS: (ii)Having cross-sectional area more

than 0.08 Sq.M and upto 0.18 Sq.M

Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in position

complete upto floor two level

Brick work using common burnt clay building bricks

having crushing strength not less than 35kg./Sq.Cm. in

26 foundation and plinth in Cement Mortar 1:6 (1- Cement 4447.28 CMT

: 6 -fine sand)(A) Modular

Brick work using common burnt clay building bricks

having crushing strength not less than 35kg./Sq.Cm. in

27 foundation and plinth in Cement Mortar 1:6 (1- Cement 4397.14 CMT

: 6 -fine sand)(C) Fly Ash Bricks

Extra for brick work in superstructure above plinth level

upto floor two level (A) Modular

Extra for brick work in superstructure above plinth level

upto floor two level(C) Fly Ash Bricks

(i) Half brick masonry in common brunt clay building

bricks having crushing strength not less than

30 Kg/Sq.Cm. in Cement mortar 1:4 (1-Cement : 4 -coarse 613.91 SMT

sand ) in foundation and plinth (A) Modular

(i) Half brick masonry in common brunt clay building

bricks having crushing strength not less than

31 Kg/Sq.Cm. in Cement mortar 1:4 (1-Cement : 4 -coarse 650.31 SMT

sand ) in foundation and plinth (C)Fly Ash Bricks

Extra for half brick masonry in superstructure above

plinth level upto floor two level. (A) Modular

Extra for half brick masonry in superstructure above

plinth level upto floor two level. (C)Fly Ash Bricks

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor

two level and finished even and smooth in (i)Cement

mortar 1:3 (1-cement:3-sand)

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

35 interior plastering upto floor two level and finished 178.61 SMT

even and smooth in (i) Cement mortar 1:3 (1-cement:3-

Providing 20mm thick cement plaster in single coat on

single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)

Extra over items 32 to 34 for finishing with a floating

37 coat of neat cement slurry 50.12 SMT

Extra over items 32 to 34 for plastering on ceilings and

38 sofits of stairs upto floor two level instead of plastering 25.80 SMT

20mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

Providing cement vata (10cm. x 10 cm. size) quarter

40 round in cement mortar 1:1 including neat cement 24.04 RMT

finishing, watering etc. complete.

Providing and laying Ceramic tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm

41 thick cement mortar 1:3 (1-cement : 3-coarse sand ) 1007.23 SMT

finishing with flush pointing in white cement.

Providing and laying Ceramic tiles 6mm thick in skrting

risers of steps and dedo on 10mm thick cement plaster

1:3 (1-cement : 3-coarse sand) and jointed with white

Providing and laying marble stone slab flooring over

20mm (average)base of cement mortar 1:6 (1 cement

: 6 coarse sand) or L.M. 1:1.5(1- lime putty: 1.5 -

coarse sand) laid and jointed with gray cement slurry

including rubbing and polishing complete. (A) Marble

slab 25mm thick

Providing and laying polished Kota stone slab flooring

over 20mm (Average) thick base of cement mortar 1:6

(1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

44 :1.5 - coarse sand) laid over and jointed with grey 1005.48 SMT

cement slurry mixed with pigment to match the shade

of slab including rubbing and polishing etc. complete.

Providing and laying polished kota stone slab 25mm

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1-Cement : 3 coarse

45 sand) and jointed with gray cement slury mixed with 1132.82 SMT

pigment to match the shade of slab including rubbing

and polishing etc. complete.

Providing & Laying Grenite slab 18 mm thick in skirting,

dedo, risers of steps and landing, sill laid on bed of

46 10mm thick base of CM 1:4 finished with flush pointing 3261.00 SMT

in white or colour cement as directed by EIC

47 Labour Charges half round edge for Granite 85.00 RMT

Labour Charges edge finished for Granite

P & L 24" x 24" vitrified 8 mm thick tile flooring over

mm (average) base of cement mortar 1:6 (1 cement:

coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the

surface etc. complete for antiskit

Providing and laying cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand : 4-graded stone aggregate

50 20mm nominal size) laid in one layer and finished with 335.72 SMT

a floating coat of neat cement. (B) 50mm thick.

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm length,30cm

height and 15cm thick of M250 grade concret as per

51 approved design and including excavation for fixing in 371.21 RMT

proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed /vibrated

mechanically and as per approved design Confirming to

52 IS 15658 : 2006 including 35 mm Sand layer for 699.93 SMT

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC: SP 63-2018 etc.

Labour Charge for removing existing block and Refix.

Providing and laying broken chine mosaic flooring

using brick bats 25 to 100mm size with 50 % of C.M.

1:4 ( 1 cement : 5 coarse sand ) admixed with water

proofing compound for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over cement

54 mortar 1:3 to plain or slope and to be tempered to 1329.30 SMT

bring mortar creme out upto surface using white

cement including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

Providing composite water proofing treatment to floor

and walls of water tank, w.c.bath area, through

approved agencies preparing floor and wall for water

proofing work/ by chasing/cutting as per the

companies requirement. First by providing and

applying cementitious crystalline based waterproofing

for concrete rafts, walls, water tanks, slabs, concrete

floors etc. with Krystol T2 or equivalent system.

Cementitious based dry Krystol T2 Crystalline powder

capable of creating Crystals to seal the pores, intercises

and micro cracks in the concrete.

Providing wood work in frames of false- ceiling,

56 partitions etc sawn and put up in position. (A) Indian 658.74 Cu.Dm.

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at

57 required spacings and frame alround, square or round 108.16 Kg

bars with round headed bolts and nuts or by screws

(A) Plain Grill.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak

wood frames 10 cm x 7 cm. size including anodized

58 alluminium fixtures and fastenings including primer 4595.06 SMT

coat of approved quality and two coats of oil painting

etc, complete. (i) Fully Glazed.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak

wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer

coat of approved quality and two coats of oil painting

etc, complete. (ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak

wood frames 10 cm x 7 cm. size including anodized

60 alluminium fixtures and fastenings including primer 4940.25 SMT

coat of approved quality and two coats of oil painting

etc, complete. (iii) Partly panelled and partly glazed.

Providing and fixing FRP frame size 125x65 mm and

35mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ alongwith

61 embedded wooden pieces for stiffening & also taking 1999.98 SMT

hinges & fintures. The whole FRP frame & shutter is to

be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive

of S.S hinges with fastener sleeve & alluminium

fixtures & fastenings.

(i) Providing and fixing glazed louvered glass windows

and ventilators with teak wood frame 10cm. x 7cm.

size including 3 coats of oil painting to wood work

Providing corrugated G.I. sheet of class-3 roofing fixed

with glavanished iron J or L Hooks, Bolts and nuts

8mm diameter with bitumen and G.I. limpet washer or

63 G.I. limpet washer. filled with white lead complete 726.92 SMT

excluding the cost of purlins, Rafters and Trusses.(1)

0.80 mm thick sheet.

Providing ridges or hips 600 mm overall in plain G.I.

sheet class-3 fixed with G.I.J. or L Hooks and nuts

64 8mm dia G.I. Limpet and bitumen washer complete. 658.12 SMT

(1) 0.80 mm thick sheet.

Providing valleys 900mm overall in plain 1.6mm thick

G.I. sheet fixed with G.I. J or L Hooks, Bolts and nuts

glavanised iron J or L Hooks Bolts and nuts 8mm dia

G.I. Limpet and bitumen washers complete.

Providing and Fixing 6 mm thick Lexan Polycarbonate

multi wall roofing sheet fixed with hilti screw and

66 rubber silicon sealer and alluminium strip of size 50 x 3 1427.62 SMT

mm etc complete as directed by Engineer in charge.

Structural steel work ( Confirming to IS 4923-1997)

riveted, bolted or welded in builtup for all type

sections, in framed work, including cutting, hoisting,

67 fixing in position and applying a priming coat of 130.52 Kg

approved steel primer all complete as per the structural

designs and directions of Engineer in charge.Column (

Water Supply Plumbing & Sanitary Fitting

Providing and fixing to wall ceiling and floor 10.0Kg.

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

68 special falnge compression type fittings, wall clipsetc. 190.12 RMT

including making good the wall ceiling and floor.(E)

Providing and fixing to wall ceiling and floor 10.0Kg.

F/Cm2 working pressure polythene pipes of the

following outside Dia. Low densidy, complete with

69 special falnge compression type fittings, wall clipsetc. 277.46 RMT

including making good the wall ceiling and floor.(F)

Providing and fixing to wall ceiling and floor 10.0Kg.

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

70 special falnge compression type fittings, wall clipsetc. 335.69 RMT

including making good the wall ceiling and floor.(G)110

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.160

PVC 4kg 90 mm dia rain water pipe

Providing and fixing in position cowel went to pipes.(B)

73 75mm dia. 389.15 Each

Providing and fixing in position cowel went to pipes.(C)

74 100mm dia 500.17 Each

Providing and fixing water closet squatting Pan (Indian

type W.C. Pan) size 580mm (Earthwork, bed concrete,

75 foot reste and trap to be measured and paid for 979.02 Each

separately) (A) Vitreous China.(I) Long pattern = White

Providing and fixing wsh down water closet (European

type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) (Seal and cover to be measured

and paid for separately)(A)vitreous China Pattern :(i) in

Providing and fixing 100mm size P or S trap for water

closet squatting pan including jointing the trap with the

pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-

Fine sand)(A) Vitreous China.

Providing and fixing 12.5 Litres low level flushing

cistern with a pair, of C.I. or Mild brackets, complete

with fittings such as lead valve less syphon, 15mm

nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections,

78 with inlet, outlet and overflow pipes, 40mm dia. 2346.92 Each

porcelain enamelled flush bend including cutting holes

in walls and making good the same connecting the

flush bend with cistern and closet (overflow pipe to be

measured and paid for separately)(A) Vitreous China

(I) In white colour

Providing and fixing plastic seat and cover for wash

79 down water closer with C.P. brass hinges and rubber 288.45 Each

buffers. (B) Black plastic seal and cover.

Providing and fixing washbasin with single hole for

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same but

excluding fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In white

Providing and fixing Kitchen sink with C.I. or M.S.

brackets, painted white including cutting holes in walls

81 and making good the same but excluding fittings. (C) 2303.62 Each

Vitreous China Sink.(i) 600mm x450mm x 150mm size

Providing and fixing C.P. brass waste for washbasin or

82 sink. (A) 32mmdia. 67.24 Each

Providing and fixing C.P. brass waste for washbasin or

sink. (B) 40mm dia.

Providing and fixing 600mm x 450mm bevelled edge

mirrror of superior glass mounted on 6mm thick A.C.

84 sheet or plywood sheet and fixing to wooden pluge 850.9 Each

with C.P. brass screws and washers.

Providing and fixing screw down bib taps of following

85 size.(B) Brass chromium plated screws down Bib Tap. 184.98 Each

Providing and fixing screw down bib taps of following

86 size.(B) Brass chromium plated screws down Bib Tap. 212.68 Each

Providing and fixing pillar tap, capstan head, screw

87 down high pressure with screws, shanks and back 305.67 Each

nuts. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw

88 down high pressure with screws, shanks and back 351.18 Each

nuts. (ii) 20mm dia.

Providing and fixing brass screw down stop tap.(A)

Providing and fixing brass screw down stop tap.(B)

Providing and fixing brass screw down stop tap.(C)

Providing and fixing Gun metal check or nonreturn

fullway wheel valve.(A) 15mm dia.

Providing and fixing Gun metal check or nonreturn

fullway wheel valve.(B) 20mm dia.

Providing and fixing Gun metal check or nonreturn

fullway wheel valve.(C) 25mm dia.

Providing and fixing Gun metal check or nonreturn

fullway wheel valve.(D) 32mm dia.

Providing and fixing Gun metal check or nonreturn

96 fullway wheel valve.(E) 40mm dia. 656.86 Each

Providing and fixing chromium plated brass half trun

97 flush cock of approved quality including fixing in pipe 252.26 Each

line etc. complete.(i) 20mm dia.

Providing and fixing chromium plated brass half trun

98 flush cock of approved quality including fixing in pipe 261.16 Each

line etc. complete.(ii) 25mm dia.

Providing and fixing chromium plated brass half trun

99 flush cock of approved quality including fixing in pipe 273.03 Each

line etc. complete.(iii) 32mm dia.

Angle Cock with PVC pipe connection upto WHB

Hose pipe for pillar cock

Wall mounted SS sink tap

Providing and fixing jet spray/hand faucet of W.C. with

103 all necessary fittings as per instruction of EIC 950.00 Each

Concealed cock 15 mm Heavy duty with cap

Providing and fixing C.P. brass towel rail comlete with

105 C.P. brass brackets fixed to wooden plugs with C.P. 610.32 Each

brass scews.(B) 600mm x 20mm size.

Providing and fixing Toilet paper holder (A) C.P

Providing and fixing PTMT soap dish holder having

107 length of 138mm, breadth 102mm, height of 75mm 160.00 Each

with concealed fitting arrangements.

Waste Pipe for Wash basin C.P. 40mm dia

Providing and fixing Urinal of approved quality

including connection with trap and with integral

109 longitudinal flush pipe.(A) Squating plate pattern white 1612.41 Each

earthenware 550mm x 300mm.

Providing and fixing ball cock of approved. Quality as

110 directed.(A) Copper Metal (i) 25mm dia. 131.57 Each

Providing and fixing ball cock of approved. Quality as

111 directed.(A) Copper Metal (ii) 50mm dia. 187.96 Each

Providing and fixing C.I. Manhole cover 0.60 M.

112 x0.45M. size having weight not less than 35Kg. 948.68 Each

Providing and fixing G.I. Rain water spout of 50mm

113 dia. and 30cm. length. 100.90 Each

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

114 following dia. nominal bore tube fittings and clamps 168.67 RMT

including making good the wall, ceiling and floor etc.

complete.[A] 15 mm.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [B] 20 mm.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

116 following dia. nominal bore tube fittings and clamps 251.31 RMT

including making good the wall, ceiling and floor etc.

complete. [C] 25 mm.

Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

117 at every two metre C/C or shall be concealed as 71.93 RMT

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level

32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

120 at every two metre C/C or shall be concealed as 146.65 RMT

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

121 at every two metre C/C or shall be concealed as 193.73 RMT

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

122 scread down or hinged grating including the cost of 593.7 Each

cutting and making good the walls.

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 75 mm diameter with jali of the following

123 nominal diameter of self cleansing design with C.I 580.47 Each

scread down or hinged grating including the cost of

cutting and making good the walls.

Providing and fixing S.W. gully trap with C.I. grating

brick masonry chamber and water tight C.I. cover with

124 frame of 300mm x 300mm size (inside) with standard 1234.57 Each

weight.(i) Square mouth traps.(B) 150mm x 100mm

size P or R type

Providing and fixing S.W. gully trap with C.I. grating

brick masonry chamber and water tight C.I. cover with

125 frame of 300mm x 300mm size (inside) with standard 1279.40 Each

weight.(i) Square mouth traps. (A) 100mm x 100mm

Drainage & Sewerage Item

Providing laying (to level or slopes) and jointing

reinforced concrete Light duty non-pressure pipes I.S.

126 class NP2 of the following internal diameter with collars 356.28 RMT

and butt ends prepared for collar joints including

testing of joints complete.(C) 250mm

Providing laying (to level or slopes) and jointing

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including

testing of joints complete.(D) 300mm

Providing laying (to level or slopes) and jointing

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars

128 and butt ends prepared for collar joints including 1066.49 RMT

testing of joints complete.(E) 450mm

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

129 frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1- 2903.89 Each

cement :2-coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-

130 cement :2-coarse sand :4-graded stone aggregate 3624.51 Each

20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside dimensions 500mm x

700 mm and 450mm deep for pipe line with one or two

Steel Aluminum & Iron Work

Providing and fixing in position collapsible steel

shutters with vertical channels 20 x 10 x 2 mm braced

with flat iron diagonals 20 x 5 mm size with top and

131 bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, 5731.43 SMT

steel pulleys complete with bolts, nuts, locking

arrangements, stoppers handles including applying a

priming coat of red lead paint.

Providing and fixing Stainless steel pipe railing using

round S.S. pipe of various diameter of approved quality

with S.S. No. 304 consisting 8 % nickel having pipe of

16 gauge including Horizontal and vertical pipe as per

detailed drawing. Vertical pipe ( posts ) firmly

embedded in flooring with concrete to give a proper

and tough support, pipe should be inter connected by

stainless steel gas welding. All joints having a smooth

132 finish including required fixtures and fastening of 2013.94 RMT

approved quality. The fabrication should be done as

per detailed drawing and as per instructions given by

E.I.C. including all material and labour required etc.

Providing and fixing extruded aluminum window,

Door, etc having extruded aluminum Colour Powder

Coated section frame main outer size 127mm x

38.10mm x 1.35mm (of Jindal Section no:2443,@

Wt.1.384 Kg/mt),horizontal Two / Three track member

size 122.20mm x 31.75mm x 1.10mm (of Jindal

Section no:8787,@ Wt. 1.205 Kg/mt),vertical member

of size 122.20mm x 31.75mm x 1.50mm (of Jindal

Section no:8935,@ Wt. 1.398 Kg/mt) with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt),vertical member of size 40mm x 18mm x

1.29mm (of Jindal Section no:8947 @ wt.of

0.456Kg/mt/Section 8948,@ Wt. 0.457 Kg/mt) with

mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

Providing and fixing Partition having extruded

aluminum Colour anodized section frame main outer

size 63.50 x 38.10 x 1.95 mm(of Jindal Section

no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm (of

Jindal Section no: 8687 @ wt.of 0.695 Kg/mt), vertical

member of size 61.85 mm x 31.75mm x 1.30 mm (of

Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt) with

134 sliding shutters of horizontal member size 40mm x 1696.73 SMT

18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x

1.29mm (of Jindal Section no:8947 @ wt.of

0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with

mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

Providing and fixing eco-friendly light weight calcium

silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as

per B.S.476 part IV, 100% humidity resistance and also

having thermal conductivity 0.043° w/m KC.for the

best thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size

X 595 mm to be laid on true horizontal level suspended

135 inter locking metal grid of hot dipped galvanized steel 1657.57 SMT

sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced

at joints to get required length and size of 24X38mm

made from 0.30 mm thick (minimum) sheet, 1200mm

centre to centre, and cross ‘T’ of size 24X28mm made

out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main ‘T’ at 600mm centre to

centre to form agrid of 1200X600mm and secondary

cross ’T’ of length 600mm and size 24x28mm made of

0.30 mm thick (Minimum) sheet to be interlocked at

middle of the 1200X600mm panel to form grid of size

600X600mm resting on periphery walls/partitions

Removing dry or oil bound distemper by a washing and

136 scraping and sand papering the wall surface smooth 11.75 SMT

including necessary repairs to scratches complete.

Extra over item 135 for removing dry oil bound

137 distemper on ceilings and sloping roofs. 13.41 SMT

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required

shade on wall surfaces to give an even shade, over

and including a priming coat with distemper primer of

approved brand and manufacture after thoroughly

brushing the surface free from mortar dropping and

other foreign matter and also including preparing the

surface even and sand papered smooth.

Distempeing (One coats) with oil bound washable

distemper of approved brand and of required shade on

wall surfaces to give an even shade, after thorouhly

brushing the surface clean of all grease dirt, loose

pieces of scales and also including distempering with

oil bound washable distemper of preparing the surface

even and smooth.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

140 surface to give an even shade including throughly 83.53 SMT

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Extra over item 138 for every subsequent coat of wall

painting with plastic emulsion pain of approved brand.

142 wall primer of approved brand 16.36 SMT

Applying priming coat over new steel and other metel

surface after and including preparing the surface by

throughly cleaning, oil,grease, dirt and other foreign

matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming

paint brushing red lead.

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter.

Painting one coats (excluding priming coat) on

previously painted steel and other metal surface with

145 enamel paint, brushing to give an even shade including 57.23 SMT

cleaning the surface of all dirt, dust and other foreign

Extra over item 141 and 143 for every subsequent coat

146 of paint 41.35 SMT

Appliying priming coat over new wood and wood based

surface after and including preparing the surface by

throughly cleaning oil, grease, dirt and other foreign

matter, sand papering and knotting. (C) Ready mixed

paint brushing priming for enamel

Extra over item 145 for every subsequent coat of

148 priming coat. (C) Ready mixed paint brushing priming 42.7 SMT

Painting two coats (excluding priming coat) on new

wood and wood based surface with enamel paint,

149 interior to give an even shade including cleaning the 91.79 SMT

surface of all dirt, dust and other foreign matter sand

papering and stopping.

Painting one coats (excluding priming coat) on

previously painted wood and wood based surface with

enamel paint, to give an even shade including cleaning

the of all dirt, dust and other foreign matter.

Extra over item 147 and 148 for every subsequent coat

151 of paint. 39.69 SMT

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

152 shape even shade after thoroughly brushing the 119.07 SMT

surface to remove all dirt, and remains of loose

powdered materials.etc complete

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface

153 to give an even shade including thoroughly brushing 40.19 SMT

the surface free from mortar dropping and other

foreign matter and sand papered smooth.

Miscellaneous Building Item

Applying general insecticide pest control treatment to

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS

154 part -II( (0.075% concentration by mass) is 90.72 SMT

recommended 10.5ml chemical diluted with 5 liters of

water application 0.5 litre chemical /Sqm of surface is

recommended as per I.S.

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene

and Chiorpurfiles 20 EC. As Per 6131_paret-II

155 Consentration Weight one percent is recommended i.e 123.12 SMT

one litre 20 EC chemical emulsion with 19 liter give

% concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical /

Sqm of surface is recommended as per I.S

Carrying out wall treatment for termite control

including spraying with chemical solution in oil base

including labour and material Using Chlorpyriphos

ECAs per IS 6313 part -II (1% concentration by mass)

156 is recommended i.e one litre chemical emulsion diluted 44 SMT

with 19 liter oil base. Total solution will be 20 liters

inclusive of one liter chemical emulsion application at

the rate of 7.5 litre chemical / Sqm of surface is

recommended as per I.S.

Repairs to plaster of thickness 12 mm to 20 mm in

patches of area 2.5 sq.meters and under, including

cutting the patch in proper shape, raking out joints and

preparing and plastering the surface of the walls

157 complete, including disposal of rubbish to the dumping 462.3 SMT

ground, all complete as per direction of Engineer-in-

Charge. With cement mortar 1:4 (1 cement : 4 fine

Fixing chowkhats in existing opening including

embedding chowkhats in floors or walls cutting

masonry for holdfasts, embedding hold fasts in cement

concrete blocks of size 15 x 10 x 10 cm with cement

concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded

158 stone aggregate 20 mm nominal size), painting two 1505.30 Each

coats of approved wood preservative to sides of

chowkhats and making good the damages to walls and

floors as required complete, including disposal of

rubbish to the dumping ground, all complete as per

direction of Engineer-in-Charge. Door chowkhats

Removing and Refixing the window after necessary

repair/maintenance and if required provide new

159 bearing/busing or any other part if required including 60.00 Sqft

all labour and material etc. as per instructions of EIC

Removing and Refixing the window with MS Grill after

necessary repair/maintenance and if required provide

160 new bearing/busing or any other part if required 80.00 Sqft

including all labour and material etc. as per instructions

Providing erecting and fixing double coated ISI water

161 tank of required capacity each with all necessary 3.91 litre

fittings and connection etc. complete on terrace

Aldrop 20mm. dia Size with necessary fitting Iron

162 Oxidised 20cms. Length 38.14 Each

Aldrop 20mm. dia Size with necessary fitting Iron

163 Oxidised 25cms. Length 42.37 Each

Aldrop 20mm. dia Size with necessary fitting Iron

164 Oxidised 30cms. Length 50.85 Each

DOOR CLOSER (GODREJ/DORMA / HAFELE) ITS 96 -

Providing and fixing Door Closer Dorma ITS 96 EN -2-4

Cam action door closure /approved equivalent suitable

for max width of 1400 mm or approved equivalent

make. The door closer shall be with integrated in the

frame or door leaf, with rapidly decreasing opening

165 resistance. Closing sped and latching action adjustable; 2035.00 Each

mechanically cushioned limit stay. Adaptation to

different rebate clearances possible non-handled (i.e.

suitable for right hand & left hand door); max.opening

angle 120 degree. All complete as per detail drawing,

as specified and as directed by Architect / Consultant /

Project - In - Charge.

DOOR CLOSER (GODREJ/DORMA / HAFELE) TS 71 -

166 Providing and fixing Door Closures 1045.00 Each

Providing and fixing alluminium section door lock with

167 all necessary fittings as per instruction of EIC 750.00 Each

Providing and fixing glass door lock with all necessary

168 fittings as per instruction of EIC 1950.00 Each

Providing and fixing wooden/glass/alluminium door

169 closer with all necessary fittings as per instruction of 1700.00 Each

170 S.S. Stopper 20 Cm long of ASIS 304 126.27 Each

S.S. Pipe Handle for door 30 Cm size o ASIS

172 Labour charges - Carpentar 1st Class 801.00 Each

Labour charges - Mason 1st Class

174 Unskilled Labour 487.00 days

Towel Rail Pair of C.P. Brass Brackets 60mm x

Providing and fixing M.S. fan clamps of shape and size

176 as specified in existing R.C.C. slab including cutting 176.96 Each

chase and making good.

P&F wooden file storage with opeable shutter with

450mm deep shelves partition and side with all outer

and inner plywood surface covered by 1mm th. SF

laminate finish using 18mm th. Verticle horizontal and

177 shutter, 12mm th. Back, shelves commercial plywood 8000.00 SMT

approved make, 01mm th. SF finish laminate teakwood

liping, SS conciled handle,sliding lock & necessary

hardware materials etc. inside and liping french polish

finish complete in all respect by engineer in charge.

Providing and fixing wooden openable shutter with

inner plywood surface covered by 1mm th. SF laminate

finish using 18mm thick plywood shutter including

178 teakwood liping,SS conciled handle, sliding lock & 2700.00 SMT

necessary hardware materials etc. inside and liping

french polish finish complete in all respects by engineer

Double layer Roller Blinds Providing and installing

179 Zebra double laye rroller blind Polyester corded 2200.00 SMT

including all fixtures.

Providing and fixing 1.20 Metre high fencing with

Metre long M.S. Angle posts 40mm x 40 mm x6 mm

and oil painting 3 coats fixed at 2.5 Mt,C/c. with five

Horizontan lines and two diagonals of galvanised steel

barbed wire weighting 9.38 Kg. per 100 Metre,

strained and fixed to posts with G.I,staples including

fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M.

block in C.C1:5:10 etc complete.

Filling of crack after making necessary groove and

181 applying the water sealent coat and etc. complete as 260.00 RMT

per the instructions of EIC.

Applying weather proof rain coat of preferably Dr.Fixit

brand on required area after cleaning the surface and

etc. complete as per the directives of EIC.

Providing and filling rubbles including hand packing

183 and filling interstices with quarry spalls behind 1083.28 CMT

abutments and between returns as directed.

Providing and fixing RBT reinforced barbed wire

weighting 9.38 Kg. per 100 Metre, strained and fixed

184 to posts with G.I,staples including fixing the postsin etc 7.00 RMT

Providing and fixing concertina coil fencing with

punched tape concertina coil 600 mm dia 10 metre

openable length ( total length 90 m), having 50 nos

rounds per 6 metre length, upto 3 m height of wall

with existing angle iron ‘Y’ shaped placed 2.4m or

m apart and with 9 horizontal R.B.T. reinforced barbed

wire, stud tied with G.I. staples and G.I. clips to retain

185 horizontal, including necessary bolts or G.I. barbed 290.80 RMT

wire tied to angle iron, all complete as per direction of

Engineer-in-charge, with reinforced barbed

tape(R.B.T.) / Spring core (2.5mm thick) wire of high

tensile strength of 165 kg/ sq.mm with tape (0.52 mm

thick) and weight 43.478 gm/ metre (cost of M.S.

angle, C.C. blocks shall be paid separately)

Partition glass in living romm / bedroom / bethrooms -

providing & fixing 12 mm thick toughened extra clear

float glass partition including doors or opening

(including of loor spring or door closer) using dorma

make spider / patch fitting as per theit specification

and requirement upto height 13'0". Item to include

186 fitting as shown in the drawing at all necessary joints 4959.00 SMT

and depending on the weight of the glass. Item to

include sealant between two glass panels. Partition

with all hardware type and its sizes and placement to

ensure the partition is sturdy & providing and applying

frost film on internal glass partition panels neatly

complete as per the company specification.

Providing & Fixing furniture with 18 MM WPC Sheet for

Kitchen, Cupboard, Storage area etc. with 18 MM thick

high density sheet as directed of make Century / green

ply or equivalent brand including all required SS

187 accessories like handle, lock, hinges, screw, necessary 995.00 SMT

hardware material etc. & sides with all outer and inner

surface covered by 1mm thick laminate finish with all

required material completed as directed by Engineer in

188 Glass 12 mm thick 677.97 SMT

189 Glass 10 mm thick 593.22 SMT

190 Glass 8 mm thick 466.10 SMT

Providing and laying sun control or frosted milky glass

191 film as per approved colour, design, cutting complete 450.00 SMT

as per instructions by engineer in charge.

Miscellaneous items which are not included in the

above list and require to execute, shall be payable as

per R&B SOR 2024-25 for Surat dist and same shall be As per As per

193 approved by EE (Civil) Corporate Office. Rate for Non

requirement requirement

SOR item shall be counted as per rate analysis

approved by EE (Civil) Corporate office

Total Amount (Excl. GST) in Rs.

Total Amount (Excl. GST) in Rs.

"All royalties, toll tax, local tax, development charges, and any other taxes etc., in respect

of this contract and also any statutory variation in future towards above mentioned taxes &

any other taxes if levied in future by statutory authority applicable to the this contract shall

be payable by the con-tractor and DGVCL will not entertain any claim whatsoever in this

The Contractor has to pay 1% Labour Welfare Cess of estimated cost to the concern

Government Department.

The contractor shall produce the receipt of payment of 1% welfare cess from the

respective govt. department before submission of final bill, otherwise final bill for the

works will not be finalized.

The proof of payment made by the contractor to the appropriate department shall be

submitted to DGVCL, failing which appropriate amount shall be withheld on getting

information/instruction from the concerned department.

I /We agree to carry out the above work at

Add (+)________% above . Rs.

Less (-) _________% below Rs.

Total cost of work. Rs.

(Total cost of work Rs. ______________________________

Signature of Tendered CEO & SE (O&M)

DGVCL,Circle Office

Seal of company