Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹84.5 LAccepted-AOC | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹85.0 L+₹50,000 (0.59%)Rejected-Finance VILLAGE TANDA VILLAGE POST TANDA BARAHALGANJ GORAKHPUR BARHALGANJ GORAKHPUR UTTAR PRADESH 273402 | GORAKHPUR | UTTAR PRADESH | 273402 | L2 | Rejected-Finance Not L1 Bidder | |
| 3 | L3₹87.5 L+₹3 L (3.55%)Rejected-Finance VINOD VIHAR COLONY PLOT NO 4 HASIMPUR LALPUR VARANSI 221002 | VARANASI | UTTAR PRADESH | 221002 | L3 | Rejected-Finance Not L1 Bidder | |
| 4 | Rejected-Technical PHULWARIA DARGAH TEGHRA PHULWARIA BARAUNI VILLAGE TOWN PHULWARIA CITY BEGUSARAI BEGUSARAI BIHAR 851112 INDIA | BEGUSARAI | BIHAR | 851112 | - | Rejected-Technical Technically disqualified | |
| 5 | Rejected-Technical | - | Rejected-Technical Technically disqualified |
Tender Value
Refer Docs
EMD Value
₹2.4 L
Closing Date
1 Mar 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
BUH HURL GORAKHPUR
HURL GORAKHPUR
Renovation of Old Silo, Toyo occupied open yard and Lubricant storage yard.
2024_HURL_796738_1
H/G/CNM/23-24/C-410R/TE-778
Open Tender
Miscellaneous Services
Tender cum Auction
180 days
HURL GORAKHPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹2.4 L
Yes
10 Jun 2024
21 Feb 2024
2 Mar 2024
21 Feb 2024
1 Mar 2024
21 Feb 2024
Amount
Civil Work
Surface dressing of the ground including removing vegetation and in?equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. i) All kinds of soil
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed by EIC All kinds of soil.
Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
White washing with lime to give an even shade : New work (three or more coats)
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials ouside plant premises or as per EIC instruction, stacking serviceable and unserviceable material separately including cutting reinforcement bars inside plant. Cutting of RCC shall be done by diamond cutter/grinder/any other means with proper cutting and finishing including shuttering at height,scaffolding or any necessary arrangement required for successful completion of work at height.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. i) Made of G.I. wire of dia 4 mm. Iron post/structural post will be provided at 3 Mtr from each other and shall be embeded under Brickwork as per EIC.
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
Epoxy, Expension Joint Tape and Aluminium foil with all T&P and shuttering included and special treatment to fix the expansion joint in Old Silo building. All the shuttering,scaffolding or any arrangement required for successful completion of work shall be in contractors scope. Leak test shall be carried out at contractors cost after completion of work.
Providing and fixing 25 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more
Electrical Work
Supply, Installation, Testing and Commissioning of wall mounted 2X18W LED lighting fixtures including providing light plug point controlled by 1-6 Ampere modular type switch inclusive of the cost for providing circuit wiring from Distribution board to switch boards with 2x2.5 sq.mm. Including handling, transportation from owners store to erection site, unpacking, inspection; checking of internal wiring; Erection in position on false ceiling / floor etc , cable glanding, crimping of lugs and connections at fixtures; supply of all erection materials Including necessary GI hardware, GI clamps, GI brackets, civil masonry materials; all work, labour and materials complete as per drawings, specifications, codes and standards and directions of Engineer in charge.
Supply of industrial type Pedestral fan
Supply and Providing Point Wiring system for 6A Plug points with single core multi stranded PVC insulated unsheathed copper conductor fire retardant wires of 1100V grade in recessed PVC conduit including providing and fixing PVC conduits of required size complete with accessories such as bends, JB, Pull Boxes etc. with plate, switches, sockets, screws and covers, Zinc Passivated MS modular boxes (16 guage sheet construction) of suitable sizes, embedded in wall, conceled and flush with walls including cutting and refilling the chases/ Wall etc and inclusive of 14 SWG bare copper earth conductor for socket outlets as per specifications & direction of Engineer in charge.All Modular type switch & socket shall be of approved make. 6A, 6 pin socket outlet with 6A switch mounted side by side with 2x2.5 sq. mm PVC copper wire with 14 SWG bare copper earth wire.(Actual nos. shall be decided at site). Including supply & installation of room lighting switch board.
Supply and Providing Point Wiring system for 6/16A power plug point with following sizes PVC insulated unsheathed single core multi stranded copper conductor, fire retardant wires of 1100V grade in recessed PVC conduits of required size complete with accessories such as bends, JB, Pull boxes etc. with plate switches, sockets, screws and covers, Zinc Passivated MS modular boxes (16 guage sheet construction) of suitable size, embedded in wall conceled and flush with walls including cutting and refilling the chases/Wall etc., and inclusive of 14 SWG bare copper earth conductor for socket outlets as per specifications & direction of Enginner in charge. All modular type switch & socket shall be of approved make. 16A, 6 Pin socket outlet with 16A switch mounted side by side with 2x4 sq. mm PVC copper wire with 14 SWG bare copper earth wire as an independent circuit from DB. (Actual nos. shall be decided at site). Including supply & installation of room lighting switch board as mentioned in inventory attached
Supply and Providing Point Wiring system for 32A Industrial socket point (A.C. Point) with 2x4 sq. mm PVC insulated copper conductor FRLS cable in recessed PVC conduit alongwith 1x4 sq. mm. PVC insulated FRLS cable for earthing I/C, Providing & fixing 32A plug & socket unit complete with 32A DP MCB and 32A plug top including GI Box to be mounted on modular plate complete with connections, testing & commissioning etc. (seprate circuit for each point)
Supply, Installation, Testing & Commissioning of following 300mm sweep Exhaust fan with guards / louvres, along with necessary brackets, all required civil works, making good the walls after fixing the fans etc.
Supply of 6ft PVC conduit 25mm
Supply and Installation of GI earth strip 50X6mm size in ready made concrete trenches or in floor slits, on brick / concrete wall under concrete floors, or paved areas, across pipe joints and valves, directly buried under ground at depth of 500 mm, including handling, transportation to erection site, bending, straightening, cutting to size, welding together of earth strips in overlapping manner, chipping in concrete floors / paved areas for laying the earth strips under floors / paved areas and making good by cement plastering concrete after laying of the strips; clamping and supporting of earth strips laid above ground, connecting the strips / wire at both ends to equipment or to earth bus / earth plates or to GI brackets fixed inside earthpit chamber, by bolting etc., Hessian tapes, all necessary GI hardware, GI clamps, civil masonry materials, etc. all work, labour as per specifications, codes and standards and directions of owner / consultant.of Hot Dip Galvanized GI earth strips .
Supply of 1.1 KV Grade, XLPE Insulated, PVC inner sheathed, armoured, FRLS PVC outer sheathed 3.5X50 sq mm XLPE Al cable
Laying and termination of 3.5X50 sq mm, 1.1 KV Grade, XLPE Insulated, PVC inner sheathed, armoured, FRLS PVC outer sheathed cables including its termination in new & readymade trenches, on pre-fabricated/ site-fabricated cable trays/ racks, on already installed risers, support, hangers,saddles / directly burried up to 700mm depth etc. pulling through pipes on walls/columns, steel structures including transportation of cable drums from storage yard to site, unrolling the drum, including supply & fixing of cable tags, Al clamps with all labour, consumable materials and necessary hardware to make installation complete in all respect as per direction of engineer-in-charge
Supply of 250W LED flood lights
Supply of 1.1 KV Grade, XLPE Insulated, PVC inner sheathed, armoured, FRLS PVC outer sheathed 4CX2.5 sq mm Cu cable in new & readymade trenches, on pre-fabricated/ site-fabricated cable trays/ racks, on already installed risers, support, hangers,saddles / directly burried up to 700mm depth etc. pulling through pipes on walls/columns, steel structures including transportation of cable drums from storage yard to site, unrolling the drum, including supply & fixing of cable tags, Al clamps with all labour, consumable materials and necessary hardware to make installation complete in all respect as per direction of engineer-in-charge
Laying and termination of 4CX2.5 sq mm armoured cu cable 1.1 KV Grade, XLPE Insulated, PVC inner sheathed, armoured, FRLS PVC outer sheathed cables including its termination in new & readymade trenches, on pre-fabricated/ site-fabricated cable trays/ racks, on already installed risers, support, hangers,saddles / directly burried up to 700mm depth etc. pulling through pipes on walls/columns, steel structures including transportation of cable drums from storage yard to site, unrolling the drum, including supply & fixing of cable tags, Al clamps with all labour, consumable materials and necessary hardware to make installation complete in all respect as per direction of engineer-in-charge
Supply, unloading, Handling, Storage, transporation within site, Erection of 415V Hose proof and weatherproof industrial type sheet steel enclosed, 18 way Single Phase socket DB (SPDB) with IP-55 degree of protection having 1 no. 63A TPN MCCB, 3 nos. 63A DP MCB in phase and 18 nos. 16A DP MCBs outgoing as indicated in attached SLD along with technical specifications, standards etc.
Excavation of 333 mtr length of 400/600 mm wide x 750 mm deep a for laying of cables including disposal of excavated earth, lead up to 100 mtrs. and lift up to 1.5 mtrs., disposed earth to be levelled and neatly dressed. After laying of cable Back filling with excavated earth in trench including consolidating each deposited layer by ramming, dressing etc.
Supply and laying of approved quality 75 mm thick second class brick flat soling with sand filling in the interstices, in cable trenches for protection including the cost of all brick and sand, labour, load and lift charges , tools and tackles etc , as per drawings, specification and directions of Site Engineer / Engineer-in Charge.
Supplying and spreading of approved quality fine dry river sand in cable trenches including the cost of all material, transport, load and lift charges, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
Supply and installation of 1.5 T split AC
Supply, unloading, storage, handling, transporation within site from store to site of installation, erection, including civil foundation and pile design as required (except cast of piling at site),installation and testing of 30M high mast shaft in three sections suitable for wind speed as Per IS-875, with raising lowering system comprising, head frame, luminaries carriage suitable to install 24 nos luminaries of BENP-20FL-350W LED of Bajaj Make or Equivalent in symmetrical arrangement, double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial, including 1 set foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. This includes Supply and installation of 24 nos. Integral LED Flood Light Luminaire with complete set of lamp & drivers as per technical specification the following components: Aluminum Cast luminary body, Electronic Circuit & LED drivers, Weather proof Transparent Cover, Luminary Mounting Clamps, LED Assembly. 1 set Within Luminary Interconnection. Supply and installation of 2 nos. LED type single dome aviation obstruction light is also required with one high mast. This also includes Supply and installation of 1 no. outdoor stand mounted feeder pillar with 63A, 4-pole MCCB incomer, single dial time switch, 45A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming and outgoing terminals suitable for required cable size(cable size shall be indicated during detail engg). The Control Panel shall be of weather proof .Construction of shallow foundation with M25 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour. Lightning Finial shall be insulated from body and head frame of High Mast and a separate down conductor (1Rx1Cx35 sq mm Aluminium Flexible Cable) shall run from the lightning finial to an earthing bolt independent of the high Mast structure. Electrical accessories like plug & socket, power tool motor etc at the bottom of high mast shall be weather proof.
Supply of 1.1 KV Grade, XLPE Insulated, PVC inner sheathed, armoured, FRLS PVC outer sheathed 3.5CX70 sq m Al cable in new & readymade trenches, on pre-fabricated/ site-fabricated cable trays/ racks, on already installed risers, support, hangers,saddles / directly burried up to 700mm depth etc. pulling through pipes on walls/columns, steel structures including transportation of cable drums from storage yard to site, unrolling the drum, including supply & fixing of cable tags, Al clamps with all labour, consumable materials and necessary hardware to make installation complete in all respect as per direction of engineer-in-charge
Laying and termination of 3.5CX70 sq mm armoured Al cable 1.1 KV Grade, XLPE Insulated, PVC inner sheathed, armoured, FRLS PVC outer sheathed cables including its termination in new & readymade trenches, on pre-fabricated/ site-fabricated cable trays/ racks, on already installed risers, support, hangers,saddles / directly burried up to 700mm depth etc. pulling through pipes on walls/columns, steel structures including transportation of cable drums from storage yard to site, unrolling the drum, including supply & fixing of cable tags, Al clamps with all labour, consumable materials and necessary hardware to make installation complete in all respect as per direction of engineer-in-charge
supply and installation of415V, 4 way DB for toyo yard room
Misc/Contingency charges
Bidder Name
Amount in Words
M/s Suresh Prasad Tiwari
MAHAVEER CONSTRUCTIONS
M/s- Ganesh Dutt Singh Conctractor
M/s- Ganesh Dutt Singh Conctractor
M/s Suresh Prasad Tiwari
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .