Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.0 LAccepted-Finance | ₹37.0 L | L1 | Accepted-Finance Financially Qualify |
| 2 | L2₹37.3 L+₹25,947.40 (0.70%)Rejected-Finance | ₹37.3 L+₹25,947.40 (0.70%) | L2 | Rejected-Finance Financially Disqualify |
| 3 | L3₹37.4 L+₹40,774.49 (1.10%)Rejected-Finance | ₹37.4 L+₹40,774.49 (1.10%) | L3 | Rejected-Finance Financially Disqualify |
Tender Value
₹37.1 L
EMD Value
₹86,000
Closing Date
14 Aug 2026, 12:00 pmClosed
DGM (T)
UKAPM Board Niranjanpur Mandi Dehradun
Construction of residential building on the roof of bank building in mandi Samiti Haridwar
2026_UAPMB_98367_2
E-Nivida-1364/2026
Open Tender
Civil Works
Percentage
180 days
Haridwar
Please refer tender document
3 documents required · 3 mandatory
₹2,950
DGM (T) U.K.A.P.M.B.
₹86,000
14 Aug 2026
4 Aug 2026
14 Aug 2026
4 Aug 2026
14 Aug 2026
4 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works above plinth level upto floor V level (5.33.2.1 D.S.R. 2023) | 55.79 | cu.m | 9,306.3 | ₹5,19,198.48 |
| 2 | Centering shuttering including strutting, propping etc. and removal of form work COL SUPER STRUCTURE (5.9.6 D.S.R. 2023) | 64.73 | Sqm | 907.3 | ₹58,729.53 |
| 3 | Centering shuttering including strutting, propping etc. and removal of form work Lintel/Beam/Slab (5.9.5 D.S.R. 2023) | 376.24 | Sqm | 695 | ₹2,61,486.8 |
| 4 | Reinforcement for R.C.C work including straighting,cutting,bending ,placing in position and bending all complete Thermo-Mechanically Treated bars. (5.22.6 D.S.R. 2023) | 5,160 | Kg | 101.8 | ₹5,25,288 |
| 5 | Brick work with F.P.S bricks of class 75 in super structure above structure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand ) (6.4.2 D.S.R. 2023) | 69.12 | cu.m | 8,594.3 | ₹5,94,038.02 |
| 6 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Profile B Fixing with adjustable 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (D.S.R.10.14.1.1 2023) | 45.7 | rmt | 550.5 | ₹25,157.85 |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (D.S.R.9.20.2 2023) | 16.92 | sqm | 2,989.95 | ₹50,589.95 |
| 8 | UPVC WINDOW & UPVC VENTILATION 9.147.A1 Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 9.147.A1.1 Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). (D.S.R.9.147.A1 2023) | 25.2 | sqm | 7,832.5 | ₹1,97,379 |
| 9 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 75 mm ( 9.92.3 D.S.R. 2023) | 16 | nos | 166.5 | ₹2,664 |
| 10 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 100x10 mm (9.97.5 D.S.R. 2023) | 16 | nos | 61.1 | ₹977.6 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.03 MB
DOC.pdf
Tender Documents • 1.21 MB
BOQ_116183.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .