Repairing of DEP 6R-1080

Amount

Overhauling /repairing and shifting of Diesel Engine Pump Set (Make Kirloskar) Model 6R-1080, Timarpur Store to Gopal Pur pumping station Under CLZ.

Overhauling/repairing of 75 BHP (Model 6R-1080) Diesel Engine pump Sets i/c replacement of following items/parts as detailed . Suitable for Make :-Kirloskar (a) Ring Set

Liner

Air cleaner assembly

Exhaust silencer of dia 2.5 inch, 4.5 foot height complete as reqd.

Exhaust M/F(Manifold)

High Pressure. Pipe

B Check kit (filters 2+2)

Fuel filter Body

Fan belt set (4 pices)

Radiator Assembly

Lube oil (20 ltr)

Set of rubber hose pipes I/c piece 2.5 inch, 2 piece 3 inch, 1 piece 6 inch, 1 piece 9 inch & 1 piece 12 inch complete as reqd.

C/F (centrefugal ) filter

Oil pipe (Fuel injection pump.) F.I.P

Leak off pipe

Fuel pipe set

Cylinder head gasket

Control Panel (Starting)

Lube oil pressure pipe

Self Starter (12 V) I/c armature, rotor. Field coil, carbon brush, patti, segment, dyed fan pulling, bearing etc. complete as reqd.

DC AH. (12 V) alternator for charging i/c armature, field coil, carbon brush, patti, seqment, dyed fan pulling, bearing etc. complete as reqd.

Water pump assembly

Starter ring

Rubber Block set

Mounting Pad (AVM)

Air filter

Coolant (5 Ltr)

Radiator fan

Fuel Pipe (10 mm)

Fuel Tank (100 ltr)

Banjo Bolt (19 No)

Banjo Bolt (12 No)

Oil seal (GE) gear end.

Oil seal (FWF) fly wheel end.

Set of joint (All packings)

Set of 'O' Ring

Set of Cu. Washes

Valve Pair

Valve seat pair

Valve guide

Oil cooler

Tefflon tape 1.5 inch, 10 foot

Old Dhoti

Empry paper 80/100/120

CR Bearing Set

Cylinder head repairing charge

fuel pump with injector o/H

Supply and fabrication of pole protection system made up of 8 SWG steel wire mesh of size 25mmx75mm rectangular with 50mmx50mmx6mm MS angle iron for supporting the mesh and grounding the protection system in suitable quality of CC etc. as reqd.

SITC of 50mmx50mmx6mm angle Iron mounting stand for ACP sign board and painting with primer and finished paint as required.

(A) P&F / Replacement of M.S. Black pipe (9.5 mm thickness) confirming to IS:3589 with required nut bolts & packing sheet etc complete as required. 300 mm dia (9.5 mm thick).

A) P/F/replacement of swing type non return valve of CI body with door, bronze, two rubber rings confirming to IS 5312 (Part-I & II), PN 1.6 complete as reqd. NRV 300 MM.

S R Rates

Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia.

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80 mm dia