Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC VILLAGE DOGHARI PO MOVISERI TEHSIL CHACHIOT DISTT MANDI HP | L1 | Accepted-AOC Lowest-1 | |
| 2 | L2₹35.0 L+₹2.0 L (6.10%)Rejected-Finance LAXMI BAZAER TEHSIL JOGINDERNAGAR DISTT MANDI HP | MANDI | HIMACHAL PRADESH | 175001 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹35.8 L+₹2.8 L (8.43%)Rejected-Finance LOWER BAZAR SARKAGHAT DISTT MANDI H P | L3 | Rejected-Finance Rejected | |
| 4 | L4₹42.0 L+₹9.0 L (27.2%)Rejected-Finance VILL SAKRAH PO CHAMBI TEHSIL SUNDERNAGAR DISTT MANDI HP | SUNDERNAGAR | MANDI | HIMACHAL PRADESH | L4 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | Naik Electrical Works L2 | AMAR NATH L1 | KUSHAL SINGH RAGHAV L4 | M/S Anil Trading And Engineering Works L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation,trenches (for pipes & pits) up to all depths in all classification of earth work such as pick work, jumper work,saturated soil including bailing and pumping out water, blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring/ strutting, planking, timbering & dewatering wherever required, stacking the useable of unuseable material/ soil separately & after excavated soil clear from the edge of excavation returning the excavated soil after laying jointing testing of pipes in trenches in 15 Cm layers including consolidating of each deposited layer by ramming & watering & then disposing of all surplus Excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. | 681.19 | Cum | 250 ₹1,70,297.5 | 321 ₹2,18,661.99 | 255 ₹1,73,703.45 | 200 ₹1,36,238 Lowest |
| 2.00Providing, laying, jointing, testing and carriage (by way of circumfrential butt welded joints in three layers by electrical arc welding) of MSERW pipe of following diameter confirming to ISO 3183-2012, steel grade of following class ERW (latest with upto date ammendments) having wall thickness as specified below with bevelled ends and capable of withstanding required test pressure in a random length of 4 to 7 meters, including manufacturing reducers/ tapers, all short pieces, bends etc. as per site requirement made from parent tubes. The laying of pipe shall include all operation such as cutting, welding, jointing, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer-in-Charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS: 4736-1986 (with upto date ammendments) with mass of zinc coating not less than 400 Kg/m2. The welding electrodes shall be as per IS 814:2004 of Advani Oerlikon/ L&T or ISI marked make. Negative tolerance in thickness and mass/weight of pipes will not be accepted. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately) | |||||||
| 2.01 | 100mm dia, GMSERW Pipe 4.00 mm thickness L 290 X-42 FT-5 | 600 | Rmt | 2,000 ₹12,00,000 | 1,689 ₹10,13,400 | 1,585 ₹9,51,000 Lowest | 1,860 ₹11,16,000 |
| 3.00Laying, jointing, testing and carriage in trenches (by way of circumfrential butt welded joints in three layers by electrical arc welding) of GMS pipe of following diameter conforming to BIS:1239-1990 ( Part-I) grade specified below (latest with upto date ammendments) having minimum wall thickness and class of pipes specified below with bevelled ends, capable to withstand the required hydraulic test pressure in a random length of 4 mtr to 7 mtr including manufacturing reducers/ tapers, all short pieces, bends etc. as per site requirement made from parent tubes. (to be measured and paid along with pipes). Bends shall be manufactured in such a way that not more than 11-1/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Enginerr-in-Charge. The welding electrodes shall be as per IS 814:2004 of Advani Oerlikon/ L&T or ISI marked make.The rates also includes entire carriage of material, flushing, cleaning and hydraulic testing of pipe complete in all respect and as per directions of Engineer-in-charge. (GI Pipes will be issued by the department free of cost).(earth work in trenches will be made and paid for separately) | |||||||
| 3.01 | 100mm dia, GMS Tube 4.50 mm thickness (M/PE) | 1,130 | Rmt | 185 ₹2,09,050 | 172 ₹1,94,360 Lowest | 265 ₹2,99,450 | 200 ₹2,26,000 |
| 4.00 | Centrifugal stage:- Supply of horizontal spindle horizontal radial split casing / and suctions (back pull out arrangement) Single/double/ multistage centrifugal pumps or combination of pumps in series/parellel of KSB/Mathur & Platt / Jyoti / Kirloskar / BE / Maxflow/ Beaconweir/Sabar make conforming to BIS 5659-1970) pump (Latest with upto to date ammendments, read with BIS 9137-1978 (latest edition) suitable for lifting clear water of under mentioned characteristics with bronze / Suitable alloy, priming funnels, casing ring and shaft motor of bronze, shaft of steel grade ASA-410 with cast iron casing coupled directly through a flexible coupling on a common MS/Cast steel plate (base plate from the principal manufacturer of pumping set) to coupling electic induction motor/motor of standard make such as Kirloskar / NGEF/Cromption / Siemen / Jyoti / BHEL / GEC/ABB & suitable for operation on 415 (+/-) 10% volts 50 cycle per second 3 phase AC electric supply conforming to BIS 900- 1972 and IS:12615:2011 with IE-2 specifications, 2900 RPM (latest) upto date ammendments) it should include the cost of bearings, nuts & bolts, painting etc and shall be and suitable for operation on the data given as below:- | 2 | Sets | 7,10,000 ₹14,20,000 | 6,83,000 ₹13,66,000 | 6,45,000 ₹12,90,000 | 6,40,000 ₹12,80,000 Lowest |
| 4.01Discharge (Q) - 5.60 LPS for each pump, Total Dynamic heads:- 359.58 Meter, LWL in sump well (h) - 1543 Meter, Shaft Level - 1545 Meter, Level at Discharge point - 1880 Meter, Suction Lift - ±ve, Discharge Head - 355 Meter, Static head - 355 Meter Rising Main- Length - 1730 Meter, Dia - 100 mm, Pumping Hours - 8 Hours, Altitude of installation above MSL - 1500 Meter, Characterstics of water - Clear water with turbidity up to 5 PPM, Temperature - 25 degree centigrade. | |||||||
| 5.00 | Providing, Installation and Commissioning of Powder Coated and CNC fabricated electric control panel for 50 HP X 2 Sets of Pumps 14 SWCG CRCA sheet thickness of Star Delta Starter of 50 HP X 2 Sets Heavy Duty which will operate two pumps coomprises of which includes F-MCCB AMP, Spreader Links, Rotary Handles, Red, Yellow, Blue and Amber Indicators, current transformers (CT's), Multi function meter which will indicate PF, THD, Current, Voltage, KWH and KVar etc, MCB's, Voltage Protections devices, Surge Protection devices which will handle Type 1 and Type 2 surges , control transformers to provide proper phase and neutral to the control devices in panel, selector switches, Terminal blocks, and control wiring to the entire satisfaction of Engineer in Charge.
Make: JSV approved make | 1 | No. | 75,000 ₹75,000 | 40,000 ₹40,000 Lowest | 2,45,000 ₹2,45,000 | 65,000 ₹65,000 |
| 6.00 | Providing double flanged CI sluice valve PN-1 of Leader/BHEL Kirlosker/ GLED/Kilburn /Fourses /Kartar make and equal to dia of suction pipe and capable of withstanding the normal seat pressure as per IS:780:1984/14846 with up to date ammendments) | 2 | Nos. | 6,500 ₹13,000 | 30,000 ₹60,000 | 9,500 ₹19,000 | 6,200 ₹12,400 Lowest |
| 7.00 | Providing double flanged swing type cast steel valve, ASA-300 of Leader/BHEL Kirlosker/Kilburn /GLEd/Fourses make and having bye pass arrangements of one step higher then delivery line of pump and capable of withstanding normal seat pressure as per BIS standards with upto date ammendments). | 2 | Nos | 19,000 ₹38,000 | 20,000 ₹40,000 | 16,500 ₹33,000 Lowest | 17,000 ₹34,000 |
Tender Value
₹34.2 L
EMD Value
₹58,800
Closing Date
28 Aug 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER JAL SHAKTI DIVISION BAGGI
as per BOQ
2023_HPIPH_77725_1
EE-JSD-BAGGI/2023-13883-933 DATED 18/8/2023
Open Tender
Civil Works
Item Rate
180 days
BAGGI
AS PER NIT
7 documents required · 7 mandatory
₹400
EE BAGGI
₹58,800
Yes
5 Jan 2026
19 Aug 2023
29 Aug 2023
19 Aug 2023
28 Aug 2023
19 Aug 2023
Amount
Excavation in foundation,trenches (for pipes & pits) up to all depths in all classification of earth work such as pick work, jumper work,saturated soil including bailing and pumping out water, blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring/ strutting, planking, timbering & dewatering wherever required, stacking the useable of unuseable material/ soil separately & after excavated soil clear from the edge of excavation returning the excavated soil after laying jointing testing of pipes in trenches in 15 Cm layers including consolidating of each deposited layer by ramming & watering & then disposing of all surplus Excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge.
Providing, laying, jointing, testing and carriage (by way of circumfrential butt welded joints in three layers by electrical arc welding) of MSERW pipe of following diameter confirming to ISO 3183-2012, steel grade of following class ERW (latest with upto date ammendments) having wall thickness as specified below with bevelled ends and capable of withstanding required test pressure in a random length of 4 to 7 meters, including manufacturing reducers/ tapers, all short pieces, bends etc. as per site requirement made from parent tubes. The laying of pipe shall include all operation such as cutting, welding, jointing, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer-in-Charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS: 4736-1986 (with upto date ammendments) with mass of zinc coating not less than 400 Kg/m2. The welding electrodes shall be as per IS 814:2004 of Advani Oerlikon/ L&T or ISI marked make. Negative tolerance in thickness and mass/weight of pipes will not be accepted. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately)
100mm dia, GMSERW Pipe 4.00 mm thickness L 290 X-42 FT-5
Laying, jointing, testing and carriage in trenches (by way of circumfrential butt welded joints in three layers by electrical arc welding) of GMS pipe of following diameter conforming to BIS:1239-1990 ( Part-I) grade specified below (latest with upto date ammendments) having minimum wall thickness and class of pipes specified below with bevelled ends, capable to withstand the required hydraulic test pressure in a random length of 4 mtr to 7 mtr including manufacturing reducers/ tapers, all short pieces, bends etc. as per site requirement made from parent tubes. (to be measured and paid along with pipes). Bends shall be manufactured in such a way that not more than 11-1/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Enginerr-in-Charge. The welding electrodes shall be as per IS 814:2004 of Advani Oerlikon/ L&T or ISI marked make.The rates also includes entire carriage of material, flushing, cleaning and hydraulic testing of pipe complete in all respect and as per directions of Engineer-in-charge. (GI Pipes will be issued by the department free of cost).(earth work in trenches will be made and paid for separately)
100mm dia, GMS Tube 4.50 mm thickness (M/PE)
Centrifugal stage:- Supply of horizontal spindle horizontal radial split casing / and suctions (back pull out arrangement) Single/double/ multistage centrifugal pumps or combination of pumps in series/parellel of KSB/Mathur & Platt / Jyoti / Kirloskar / BE / Maxflow/ Beaconweir/Sabar make conforming to BIS 5659-1970) pump (Latest with upto to date ammendments, read with BIS 9137-1978 (latest edition) suitable for lifting clear water of under mentioned characteristics with bronze / Suitable alloy, priming funnels, casing ring and shaft motor of bronze, shaft of steel grade ASA-410 with cast iron casing coupled directly through a flexible coupling on a common MS/Cast steel plate (base plate from the principal manufacturer of pumping set) to coupling electic induction motor/motor of standard make such as Kirloskar / NGEF/Cromption / Siemen / Jyoti / BHEL / GEC/ABB & suitable for operation on 415 (+/-) 10% volts 50 cycle per second 3 phase AC electric supply conforming to BIS 900- 1972 and IS:12615:2011 with IE-2 specifications, 2900 RPM (latest) upto date ammendments) it should include the cost of bearings, nuts & bolts, painting etc and shall be and suitable for operation on the data given as below:-
Discharge (Q) - 5.60 LPS for each pump, Total Dynamic heads:- 359.58 Meter, LWL in sump well (h) - 1543 Meter, Shaft Level - 1545 Meter, Level at Discharge point - 1880 Meter, Suction Lift - ±ve, Discharge Head - 355 Meter, Static head - 355 Meter Rising Main- Length - 1730 Meter, Dia - 100 mm, Pumping Hours - 8 Hours, Altitude of installation above MSL - 1500 Meter, Characterstics of water - Clear water with turbidity up to 5 PPM, Temperature - 25 degree centigrade.
Providing double flanged CI sluice valve PN-1 of Leader/BHEL Kirlosker/ GLED/Kilburn /Fourses /Kartar make and equal to dia of suction pipe and capable of withstanding the normal seat pressure as per IS:780:1984/14846 with up to date ammendments)
Providing double flanged swing type cast steel valve, ASA-300 of Leader/BHEL Kirlosker/Kilburn /GLEd/Fourses make and having bye pass arrangements of one step higher then delivery line of pump and capable of withstanding normal seat pressure as per BIS standards with upto date ammendments).
Providing double flanged cast steel reflux valves class, ASA-300 of Leader/BHEL/ Kirlosker/Kartar/Kilburn /GLEd/Fourses make for rising main and capable of withstanding normal seat pressure as per BIS standards with upto date ammendments).
Providing 100mm dia circular dial analog pressure gauge of suitable range of Fiebig /Bourden/ PREGA/precision make complete with all accessories such as stop cock, copper tubing etc as per IS: 3624-1987 with upto date ammendments.
Providing, Installation and Commissioning of Powder Coated and CNC fabricated electric control panel for Automation System of 14 SWCG CRCA sheet thickness and which includes PLC (Programmable logic controller) with appropriate digital and analog inputs and outputs to give automatic command to Star Delta Starter Panel/ Energy Saving Variable Frequency Starter Panel, Electronic relay card 8 channel, SMPS 4.5 Amps to energise PLC system, HMI (Human Machine Interface) 7" display for Monitoring and Controlling of pumps, SCADA software,Mobile App (Android/IOS) with User ID and Password to monitor and control the pumping operation from Mobile for 3 users., Cloud GateWay for Data Clouding to Server, and also to analysis the pump start and stop history logging, fault status, fault history, Power Quality Parameters like PF, Current, Voltage, KWH, THD etc and Software Develop. Make: JSV approved make
Providing,Installation & Commisioning of Electromagnetic Flow Meter with RS-485 communication complete in all respects as per satisfaction of Engineer In Charge Make: Forbes Marshal/SBEM/ABB/Siemens
Supply and Installation of Actuated Valve with Electrical Motorised Motor Actuator . Make Leader/Kirloskar
Supply and Installation of Ultrasonic Level Sensor to indicate the water level and water volume of tank remotely through SCADA System. Make: SBEM/Siemens/ABB
Providing and fixing double flanged MS/GI piping work (Layout to be approved by the Engineer-in-Charge) for suction and delivery pipes suitable to pump(s) offered and common header as per the R/Main respectively complete with all specials such as bends, tees, reducers. Increasers with companions flanges matching with the relevant specifications of the accessories including rubber/asbestos gasket of minimum 3mm thickness as per IS:2712:1979 and required number of nuts and bolts as per IS:1364:1983, The Pipes fittings and joints shall be as per relevant IS code & to withstand 1.5 times total head stipulated under item No.20. The size of the various components to be as under:
a) Suction pipe : One dia higher then the suction of pump offered and suitable to keep the velocity of flow from 1 to 1.5M/second in the suction pipe
b) Delivery pipe: One dia higher then the delivery of the pump offered and suitable to keep the velocity of flow from 1.5 to 2M/second in the delivery pipe.
c) Common header : One dia higher then delivery of pump will extend upto 5 meters from the outer wall of the pump house in the direction to be jointed.
Providing and laying copper PVC insulated armoured power cable (One cable carrying all the three phases) of suitable size and capacity to motors and all other electircal equipments as per IS:1554(P-I) 1988 or latest ith upto date ammendments of siemens/GLOSTER /IEC/ICC/EICO/ NATIONAL/ GRANDLAY make including all other accessories such as thimbles, flexible pipes,solders,nuts and bolts cable glands etc. laid in pipes or trenches under floor.
(a) Motor side (From switch to starter and starter to motor)
(b) Supply side (From Meter of HPSEB to bus bar and switch)
Providing and fixing double loop earthing with GI plate 600mmx600x3mm thick electrode complete with material such thimbles nuts and charcoal and common salt, 25mmx5mm copper strips as per IS:3043 :1987 with upto date ammendments for motors and other electrical equipments and digging of pits etc. complete in all respect.
Naik Electrical Works
M/S Anil Trading And Engineering Works
KUSHAL SINGH RAGHAV
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .