Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.8 LAccepted-AOC 45 PIR BABA TARUSHAW ROAD HALWARA AD LUDHIANA 141106 | HALWARA | LUDHIANA | PUNJAB | 141106 | L1 | Accepted-AOC L1 | |
| 2 | L2₹31.3 L+₹58,899.83 (1.92%)Rejected-Finance RAJKOT ROAD AIR FORCE STATION HALWARA 141106 PUNJAB | HALWARA | LUDHIANA | PUNJAB | 141106 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹32.7 L+₹2.0 L (6.51%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹34.2 L+₹3.6 L (11.6%)Rejected-Finance KHATA NO 254 529 KHASRA NO 364 2 MIN PREET NAGAR A GALI NO 2 HARERI ROAD OPP STAR STUDIO HERARI SANGRUR | SANGRUR | SANGRUR | PUNJAB | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹34.3 L+₹3.6 L (11.7%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹85,920
Closing Date
26 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Halwara
GE (AF) Halwara
ADDN/ALTN TO SMQs AT RP AREA AT AF STN HALWARA
2024_MES_644228_1
GE/HAL-75/2023-24
Open Tender
Civil Works
Item Rate
180 days
Halwara
MES ENLISTED CONTRACTORS CLASS D CATEGORY a(i)
8 documents required · 8 mandatory
₹500
GE (AF) Halwara
₹85,920
Yes
12 Apr 2024
27 Feb 2024
28 Mar 2024
27 Feb 2024
26 Mar 2024
12 Mar 2024
Amount
Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water, complete all as specified and directed.
Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding a shlars facings, dressed stone work and pre-cast concrete articles, complete all as specified and directed.
M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radiusbuilt in cement mortar 1:6,complete all as specified and directed.
M&L for 15 mm thick plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of new surface of wall and applying two coat of distemper oil emulsion over a coat of primer above 1mm thick plaster of paris putty, on new surfaces, complete all as specified and directed.
M&L for complete removal of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots applying two coat of distemper oil emulsion over a coat of primer above 1mm thick plaster of paris putty, on old surfaces, complete all as specified and directed.
All as per Srl item No 4 above but 1st coat of 10 mm thick in CM(1:6) and above 5mm thick in CM (1:4) as a 2nd coat of rendering with WPC, complete all as specified and directed. Note : WPC will be measured and paid separately.
M&L for Prepration of new plastered surfaces of wall and applying two coat of cement base paint over a coats of primer on plastered and other surfaces complete all as specified and directed.
M&L complete removal of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spotsapplying of new plastered surfaces of wall and applying two coat of cement base paint over a coats of alkali resistant primer plastered on surfaces, complete all as specified and directed.
M&L plastering 5 MM thick in cement mortar (1:3) furnished even & smooth without using extra cement as on ceiling, complete all as specified and directed.
M&L for preprationof new surfaces and applying three coat of white wash on ceiling, complete all as specified and directed.
M&L Preprationof old surfaces and applying one coat of white wash on ceiling, complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L Glazed ceramic coloured tiles (450x350mm) x6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.
M&L for Non skid jointless cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment complete all as specified and directed.
M&L for Non skid jointless glazed cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment, complete all as specified and directed.
M&L15mm thick screed bed or bedding layer in cement mortar (1:6) as in floor for laying floor tiles, complete all as specified and directed.
M&L15mm thick screed bed or bedding layer in cement mortar (1:6) as in floor for laying floor tiles including water proofing compound mixed as per manufacturer's instruction complete all as specified and directed. Note: WPC shall be measured and paid separately.
Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but n-exc 4 sqm, complete all as specified and directed.
Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each, complete all as specified and directed.
S&F pressed steel frames of size 125x60mm for doors made out of PBC sheet 1.25mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.
S&F pressed steel frames of size 105x60mm for doors made out of PBC sheet 1.25mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.
M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in hold fast for pressed steel frames and back filling of pressed steel frame, complete all as specified and directed.
S&F 35 mm thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial ply 12mm thick veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated, complete all as specified and directed.
S&F 35 mm thick IInd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc.without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I, complete all as specified and directed.
S&F ECO - 4000 Series window/ventilators (Double rebated) fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS 513 "D" quality galvanised as per IS 277 with Zinc of 120gms/Sq.mtr) with total coated thickness of 0.6mm and section of frame should be of 72mm x 55mm, section for mullion should be cf 72mm x 50mm, section for shutter frame should be of 47mm x 20mm, section for fixed glass bead should be of 12mm x 12mm and section for fly mesh should be of 40mm x 20mm, coated section should be with primer coat of Epoxy primer of 5-7 microns thick, finish painted with polyester upto 50-60 microns thick including 5mm thick plain glass stainless steel 32 gauge fly mesh of 304 grades with 144 holes per square inch and grill made of 10mm sq MS bars welded to at 150mm center to center, 6mm x 12mm MS flat (total grill unit should be power coated and fixed to window frame with screws) (a) FIXING DETAILS :- Section for frame Glazed shutter and Mesh shutters should be cut to lenght and miter joined with polyropylene cornar brackets, mullion section should be joined with Frame /Mullion using Mullion Cap ethyl proplene damein monomer (EPDM) gasket should be used all around glass in shutter and fixing glass rubber, Gasket should be around glass in shutter and fixed glass. rubber gasket should be used around fly mesh to fix mesh in mesh shutter. (b) ACCESSORIES :- Each glazed shutter and mesh shutter should be provided with SS pivot hinges- 1 set, seccolor stay. window frame should be fixed to brick/concrete masonry by using Nylon self expanding caps and driving MS electoplated 80mm long screw into the caps through frame complete all as specified and directed.
S&F SolidPVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube , suppling but single side prelam PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheetand fixing in opening as per specification and drawing, complete all as specified and directed.
S&F 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail,MS frame shall be covered with heat moulded but wood grain printed PVC sheet used but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 900 bent edge. and fixing in the frame and site as specification complete all as specified and directed. Note:- PVC door shall be provided for bath/WC & Cubboard.
Factory made single extruded WPC (Wood polymer Composite) Solid door/window/ceosetory window/ & other frames/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 Kg /cum, screw withdrawal strenght of 2200N (face) & 1100N (Edge), minimum compressive strength of 58 N/mm Sqr, modules of elasticity 900 N/mm Sqr and resistance to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in positon with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and directed. Note :- WPC solid door / window frame upto minus 5mm tolerance in dimension ie. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F hasp and staple saftey type aluminium anodised with mild steel hinges pin including bolt to hing plate and fixed with screw size 125mm, complete all as specified and directed.
S&F stainless steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tined tacks or galvanised wire staples complete all as specified and directed.
S&F in reapair stainless steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tined tacks or galvanised wire staples complete all as specified and directed.
S&F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 75 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F Floor doors stoppers of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long complete all as specified and directed.
S&F in repair floor doors stoppers of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed.
S&F Aluminium handles cast type anodised 150mm long complete all as specified and directed.
S&F 300 mm long aluminum anodised sliding door bolts ,Aluminium alloy,door bolt with hasp,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium complete all as specified and directed.
S&F mild steel 300mm ordinary rat tail rod door spring , patteren including roller and roller plate complete all as specified and directed.
Preparation of new wood surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for prepraration of old or previously untreated surfaces of wood and applying one coats of synthitic enamel paint complete all as specified and directed.
Taking up or down 20 mm dia steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.
S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F in repair 15mm bore Bib taps, fancy type cast copper alloy with crutch or butterflyhandle, screweddown, screwed for iron pipe or for brass ferrule and fixed fancy type, chromium plated complete all as specified and directed.
S&F in repair 15mm Stop valves, fancy type cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed, chromiumplated, with longshank and cup(concealed type) complete all as specified and directed.
S&F as in repair 20mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed.
S&F in repair Orrisa pattern WC in ground floor vitreous china white of size 580mmx440mm incl provision of lime concrete bedding, complete all as specified and directed.
S&F in repair PVC connection 600 mm long, 15mm size with PTMT nuts, complete all as specified and directed.
S&F in repair 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe, complete all as specified and directed.
S&F in repair chromium plated shower rose with or without swivel joints (125 mm size), including fixing to steel/pvc pipe or union swivel shower with shower arm, complete all as specified and directed.
S&F vitreous pigmented china wash basin, white B corner size 450x390mm excluding taps, waste chain, waste pipe and plug and proclain stopper but including bracket complete all as specified and directed.
S&F in repair fancy type Pillar taps 15 mm bore, cast copper alloy, with capstan heads,chromium plated,screwed down high pressure,with or without lettered Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.
S&F brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges, complete all as specified and directed.
M&L M.S framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410-W Gde E-250 quality A, complete all as specified and directed.
M&L for 0.63 mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required confirming to relevent IS, complete all as specified and directed.
Preparation of new steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.
M&L for prepraration of old or previously untreated surfaces of steel and applying one coats of synthetic enamel paint, complete all as specified and directed.
Demolotion of stone slabs and tiles of any description or thickness Laid, bedded and pointed in any mortar in floors, aprons etc. complete all as specified and directed.
M&L granite (black) slab (of any type) 20mm thick (table rubbed and mirror polished) in steps, jambs, pillars, window-cills, cooking platforms and like in and including 15mm thick screed bed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite, complete all as specified and directed.
M&L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situation, complete all as specified and directed.
M & L for machine cut kota stone slab 18 to 20 mm thick as in flooring / stair case landing, laid over & incl. 15mm thick cement screed base in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. Note:- Single pieces kota stone in treads & 3 Nos of V grove is to be made in the edge and quoted rate shall deemed to be included for the same.
M & L for machine cut kota stone slab 18 to 20 mm thick as in skirting/steps /floor laid over & incl.10mm thick cement screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing ccomplete all as specified and directed. Note:- Single pieces kota stone shall be used in riser.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F for 110 mm PVC (SWR) Waste/rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F for 75 mm PVC (SWR) Waste/rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F PVC (SWR) bends 110 mm dia complete all as specified and directed.
S & F PVC (SWR) bends with provided with access 110 mm dia complete all as specified and directed.
S&F PVC(SWR) bends 75 mm dia complete all as specified and directed.
S&F PVC(SWR) junction double,(Single T),equal or unequal. 110 mm dia . With acess door complete all as specified and directed.
S&F PVC(SWR) junction double,(double y),equal or unequal. 75 mm dia with access door complete all as specified and directed.
S&F PVC(SWR) junction single(single y),equal or unequal. 75 mm dia with access door complete all as specified and directed.
S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.
S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.
S&F 110mm PVC (SWR) reducers complete all as specified and directed.
M&L 100mm dia PVC floor trap with CP grating including jointing to waste pipe with cement solvent complete all as specified and directed.
Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C2 as in plinth protection/floor sub base etc. complete all as specified and directed.
M&L 75mm thick PCC 1:4:8 Type D-2 using 40mm crushed stone aggregate as in sub base floor complete all as specified and directed.
M&L for Sand filling under floors or in foundations incl. watering and consolidation complete all as specified and directed.
M&L 60mm thick rubber finesh interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-35 Grade as approved by E-I-C laid in flooring and joints filled/broomed with fine sand, complete all as specified and directed.
Demolition for cement conc exc 15cm thickness but above ground floor as sunken floor, complete all as specified and directed.
M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded stone aggregate) as in sunken flooring complete all as specified and directed.
M&L 25 mm thick cement concrete type B1 1:2:4 using (20mm graded stone aggregate) in floor finishes even to receive floor tiles complete all as specified and directed.
M&L for applying two coats of water proofing coating on the entire surface of sunken portion complete all as specified and directed.
M&L for 15mm thick cement screed in CM 1:3 admixed with integral water proofing compound @ 130ml per bag of cement incl a bonding coat @ 200ml per bag of complete all as specified and directed. Note : FOSROC’s/STP/SIKKA
Dismantling of brick tiles or terracing tiles, single layer on roofs any type and size complete all as specified and directed.
M&L PCC (1;2:4) type B-1 using 20mm graded stone gregete as in cement concrete in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.
M&L for wire brushing neat cement slurry with 3kg of cement per sq m at top and bottom of base coat and cleaning top surface, complete all as specified and directed.
M & L for PCC padding average 40 mm thick to be provided in slope with PCC 1:2:4 type B-1, using 20mm graded aggregate, complete all as specified and directed.
M&L plastering 10mm thick in cm 1:4 mixed with WPC over cleaned concrete surfaces complete all as specified and directed. Note : WPC shall be measured and paid separately.
Supply only integral waterproofing compound complete all as specified and directed.
M&L for APP Polymeric water proofing tratment with mineral finish to roof, at any height using membrane minimum 3mm thick and weighting not less than 3.6 Kg per sqm, black finish reinforced with non-woven polyster matt weighting not less than 150 gms per sqm with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 ltr per sqm, torching ovarlaps with a propane or butane gas torch with a overlap of 100mm at the side on transverse direction and 150mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 kg per sqm below APP complete all as per manufacturer instructions, complete all as specified and directed.
M&L cement concrete chequered tiles 25cm x 25cm x 22mm thick , machine pressed,set, jointed & pointed in neat cement slurry in floors/roof with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6, complete all as specified and directed.
Preparation of roof top surfaces, providing and applying UV stable single component Smart Care Damp Proof Ultra fibre reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibres and having Sun Reflectivity Index (SRI) of 106 on top of conrete roof surfaces in three coat including self primar at ratio of damp proof ultra and water 3:1 and covrage @ 1 Ltr / 1 Sqm with a thickness of 650 micron, the vital physical and chemical parameters shall be as under : Min Elongation at break of 350%, Resists positive hydrostatic pressure of upto 10 bars, crack bridging ability of 2.5 mm at 650 microns. The material shall be applied with brush or roller, complete in all respect as per the direction of Engineer in Charge/manufacturer's instruction complete all as specified and directed. Note :(i) 6hrs interval between two coat will be maintain. (ii)The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (iii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years . However contractor may deposit the FDR of same amount in favour of GE . If contractor fail to rectify the defect pointed out during this period in writing , the defect shall be got rectified at contractor " risk and cost and the payment shall be made from the amount of kept reserved or by encashing the FDR deposited by the contractor as guarantee. the contractor's quoted rates for this item shall deemed to be inclussive of this aspect. Make: STP/Sika/Asian paint or equivalent as approved by GE.
Demolition on reinforced cement concrete of any description and in any position not otherwise specficially provided for complete all as specified and directed.
M&L for RCC(1:2:4), type B1 (using 20 mm graded stone aggregate) Precast cement concrete cover slab for tank staging, manhole cover and similar article with plain face, set in cement mortar 1:4, complete all as per specified and directed.
M&L for Mild steel bars 10mm dia and over TMT bars cut to length bent to shape reqd including cranking ,bending spirally for hooping for columns hooking bends and binding with including mild steel wire (annealed) not-less than 0.9mm dia or securing with clips quality, complete all as per specified and directed.
M&L for repairing RCC projection chajjas, roof, facia etc. by necessary preparation, scraping, cutting, chiseling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but n.exc 3Kg/Sqm (if required) with or without facia and finished with cement morte 1:3 using coarse sand and work in patches area n.exc 5 Sqm and thickness RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height, complete all as per specified and directed.
S&F PVC Cabinet required size at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick PVC sheet & provision of shutters made out of 18mm thick one side decorative laminatied PVC sheet all required (5.5 screes etc the panels shall be fabricated using adhesive and screws where ever required all deges shall be covered with 2mm thick edge bonding tape or 90degres band finished including cathers shutters fixed with 40 mm flap width continuous (piano) hinges, mild steel, bright finish or electrogalvanised hings in each pane stainless steel handle 125mm long including taking down exiting wooden / black board cabinate, complete all as per specified and directed.
S&F 18/19mm thick with 6mm lipping to prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work, complete all as per specified and directed.
M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite TreatmentAlong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron, complete all as per specified and directed.
M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors, complete all as per specified and directed.
M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same, complete all as per specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as per specified and directed.
S&F rolled Mild steel work as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks (coolar stand) and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc..(Fe-410-W(Gde E-250)Quality-A) complete all as per specified and directed.
S&F Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250)Quality-A), complete all as per specified and directed.
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm but not exc 20 cm girth, complete all as per specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in sun shedes covering to wall, fixed with self tapping screws, complete all as per specified and directed.
S&F plain 0.56 mm aluminum sheeting, alloy 31000 H4 on roof, walls etc, complete all as per specified and directed.
S&F in repair 750 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) tripple layer, white color hoisted and fixed in position of any description and removing the debris away from the site complete all as per specified and directed.
S & F 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe, complete all as per specified and directed.
S & F in repairs; stainless steel plate rack made out of 1mm thick steel sheet of size 75cm x 90cm x 25cm with fixing arrangements, complete all as per specified and directed.
S & F in repairs harrison rails,anodised alluminium alloy with fixing brackets, stops, rollers etc. with fancy knobs as approved, complete all as per specified and directed.
S&F in repair sinks made of stainless steel1mm thick for kitchen or laboratory with plugs,waste pipe,washers and waste including cast iron cantilever brackets connecting union etc over all size 495mm x 420mm with bowl size 410mm x 330mm x160 mm, complete all as per specified and directed.
M & L for writing letters or figure (Block.Roman,Italic or Indian) nexc.30cm high with Synthetic enamel Paint complete all as per specified and directed.
Taking down copper/aluminium point wiring for (light, fan, socket or power and bell) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets bell etc. and making good the distrubed surfaces on wall/floor etc, complete all as specified and dirceted.
Taking down MCB DB TPN/SPN/ and load of any make and type inclduing dismantling all electrical connections from MCBs/MCCB/isolators and making good the distrubed surface, complete all as specified and directed.
Disconnecting and taking down old existing light fitting of any description from any position, complete all as specified and directed.
Disconnecting, taking up the existing electric fan/Exhaust fan and submitted to mes store yard and refixing the same complete with all accessories, complete all as specified and directed.
Disconnecting and taking down old existing meter box carefully with meter and refixing meters in proposed meter box, complete all as specified and directed.
Disconnecting, taking up the existing electric Geyser and refixing with replacement of all accessories such as safety valve, thermostate, NRV, connection piece etc.all accessories, complete all as specified and directed.
Disconnecting and taking down old existing sub main wiring of any description from any position, complete all as specified and directed.
Disconnecting and taking down old existing Earthing, complete all as specified and directed.
M&L for Point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sq.mm, single core, PVC insulated,unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc, including GI terminal boxes with 3 mm thick plastic laminated sheet cover having necessary cutting for fixing switches/ sockets including 1.5 Sq.mm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly, complete all as specified and directed for :-
One light point/ fan/Exhaust controlled by one switch.
One three pin socket 5 amps outlet on same board.
One three pin socket 5 amps outlet on Independent board.
One Bell point controlled by one switch.
One light point controlled by two 2-way switches, with cables 1.5 sq. mm size.
All as per item No 126 above but point wiring with 1100 Volts grade, 2.5, Sqmm PVC insulated, FRLS, unsheathed, cable confirming to IS-694,PartII, ISI marked with Multistranded copper conductor cable in and including PVC conduit.
S & F Switch piano, flush type single pole, one way 5 Amp, complete all as specified and directed.
S & F Switch piano, flush type single pole, two way 5 Amp, complete all as specified and directed.
S & F Socket outlet 3 pin, 5A, flush type, complete all as specified and directed.
S & F Switch piano, flush type single pole, one way 15 Amp complete all as specified.
S & F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type, complete all as specified and directed.
S&F ceiling rose surface bakelite 65x50mm with three terminals, complete all as specified and directed.
S&F Fan stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and directed.
Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps (for AC & Geyser), complete all as specified and directed.
S&F Sheet metal enclosure DB SPN, 8 way with 200 Amp rated bus bar, 240 V, double door . for fixing MCB’s, isolators etc., having IP-43 protection, flush mounting, complete all as specified and directed.
S&F amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) SPN 6 to 32 AMp in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.
Supply and fixing MCB,SP, 6 Amp to 32 Amp, 240 Volt, 50HZ, 10 KA, `B` Series, making electrical connection with the help of Lugs/thimbles, complete all as specified and directed.
Supply and fixing LED lights fitting 4 feet Long 1x 20W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.
Supply and fixing LED lights fitting 2 feet Long 1x 10W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.
S&F submain wiring with 2X4 sqmm (nominal area) PVC insulated FRLSH, unsheathed, multistrand, 1100 volts grade copper conductor cable single core. drawn through in and including non metalic PVC concealed conduit not less than 20mm dia medium grade and its accessories including one run of 4 sqmm earth wire of same specifications,, complete all as specified and directed. Note:- 2 Runs of main wire and 01 run of earth wire including PVC conduit shall be measured and paid as one unit.Surface conduit shall be laid in celing portion only.
S&F submain wiring with 2X6 sqmm (nominal area) PVC insulated FRLSH, unsheathed, multistrand, 1100 volts grade copper conductor cable single core. drawn through in and including non metalic PVC concealed conduit not less than 20mm dia medium grade and its accessories including one run of 6 sqmm earth wire of same specifications, complete all as specified and directed. Note:- 2 Runs of main wire and 01 run of earth wire including PVC conduit shall be measured and paid as one unit.Surface conduit shall be laid in celing portion only.
S&F building security light 35Watt including fittings connection from ceiling rose to light fitting with twin core cable 23/0.0076 sqmm, complete all as specified and directed.
Supply and fix exhaust fan, heave duty steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed. Note:- Exhaust fan shall be deposited to MES store yard by the contractor and be taken on chatge by the department.
Supply and fix ceiling fans 5 star BLDC type, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, complete all as specified and directed. Note:- Fan shall be deposited to MES store yard by the contractor and be taken on charge by the department.
M&L for earthing in repair complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type B-1 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR Part I (2009), complete all as specfied and directed. Note : RCC pit cover shall be precast of RCC 1:2:4, type B-1, 80 mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of cast iron cover.
M & L angular lamp holder PVC / Polycarbonate type with back plate suitable for bulb fitting Incluiding 9 watt LED Bulb, complete all as specfied and directed.
S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
S & F Bell, AC, 230 volts, single pole, complete all as specfied and directed.
Supply and Fixing ,installation, commissioning and testing polycarbonate CPRI approved OEM made 4 Nos meter pannel. the panel shall be made of polycarbanate thermoplastic enclosers which should be uv resistance in accordance with IEC 61439-1,clause 10.2.4.The meter panel should beanti acid, anti corrosive & fully transparnet door for meter vision. Degree of protection against mechanical load should be IK08 ( 5 Joule) in accordance with IEC 62262. The manufacturer of panel shall submit a copy of his CPRI TEST REPORT IN POLYCARBONATE only also share panel assemble by OEM, channel partner or sister concerned assmbly will not accepted. DEGREE OR INGRESS PROTECTION IP 65 IN ACCORANCE WITH IEC 60529. The gasket should be internally embedded made of ployurethane. The manufacturer of panel shall submit a copy of type test report of a board made out of plycarbonate thermoplastic panel in accordance with IEC 60439-1. The CPRI report shall have mention of following tests performed and passed out satisfactorily tempreature rise, dielectric properties, short circuit withstand current- rated peak & short time withstand current and rated conditional short circuit current effectiveness of protective circuits. The board manufacturer must submit the copy of type test report for polycarbonate thermoplastic board only. Each board shall have individual routine test report of the manufacturer. The panel should passed glow wire test 960º C in accordance with 60685-2-11 (flame retardant and self-extinguishing) including one main incomer MCCB 40A TPN 25KA Thermal/Magnetic release with spreader link. MCCB/MCB Nob operated by filp cover. Indicatore provided on each phase, Provision of four Nos single phase sub-meters. Output supply by MCB SP 32 Amp 5 Nos meter enclosures & enclosures accessories as per RAL 7035. Ten Nos terminal block provided for output supply, complete all as specfied and directed.
Taking Out old unserviceable LT UG cables, having cross sectional area upto 16 sqmm Sqmm 4 core, complete all as specified and directed.
Supply and laid in tranches/floors or fixed on wall for cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core including fixing materials like lugs,cable glands etc, complete all as specified and directed.
All as per item No.157 above but of size 70 Sqmm 3.5 core ( For Pole to LT Panel)
M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 32X6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR 2009 (Part-I) connected to earthing test point and including testing on completion with electrical connection to earth test point, including protection pipe Gl 40mm bore light grade pipe and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type B-1 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR Part I (2009), complete all as specfied and directed. Note : (i) RCC pit cover shall be precast of RCC 1:2:4, type B-1, 80 mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of cast iron cover. (ii) Earth strip and Gl Pipe 40mm upto 7.5 mtr length is included in this item.
S & F 4 Pole MCCB 125 to160 Amp, 50 Hz, 415 V with rupturing capacity 25 KA, complete all as specified and directed.
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cables and getting out in soft/loose soil, complete all as specified and directed.
Returning filling in layers including spreading, leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.
Removing surplus soil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point, complete all as specified and directed.
Material and labour for sand cushioning with a layer of sand 80 mm thick before laying of cable and 15 cm thick (punned down to 100 mm thick) after laying of cable in trenches/ducts complete all as specified. Note: Punned down thicknes(overall 18 cm) shall be considered for measurement and payment.
Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 300x180x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.
Material & Labour for galvanised iron tubes 40 mm bore, light grade for protection of cable with & including all fittings fixed to wall, pole or laid in road/floors etc, complete all as specified and directed.
M/S SANGA SINGH AND CO
M/s Balvinder Singh Engineer and Contractors
JINDAL AND COMPANY
BEHL AND COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .