SPL REPAIR TO MAIN DRAINAGE, SEWAGE LINE AT 3 GARH RIF AND OTM BLDG FD WKSP COY AT GE DEHRADUN

Amount

Taking down Chowkat any description exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company complete all as specified and directed. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 65 mm x 100 mm made from wood plastic composite (single extruded process) material with density 750 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed.

Taking down door shutter of any description exc.1 sqm but n exc 2 sqm each complete all as specified and directed.

S & F 35 mm thick second class hardwood glazed and Skeleton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 100 mm size stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed.

S&F 200 mm long, solid in one piece stainless steel barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed.

S&F 150mm size solid in one piece stainless steel handles, all in 304 grade and fixed in stainless steel screws complete all as specified and directed.

S&F stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, and fixed 250mm long complete all as specified and directed.

Hacking out old broken glass (any thickness), size quality or description from wooden frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm each pane complete all as specified and directed.

M&L for mild steel framed work as in door or gate angle or other section prepared for handing and sliding with and including hooks and hinges and steel gate doors fittings Fe-410-W. E-250 quality 'B' including dismantling of old unserviceable mild steel complete all as specified and directed

M&L mild steel plain black sheet 1.60 mm in wall cladding steel gates and similar work cut to size, holes, punched including round headed screws, clout nails or rivets and fixed to wooden or steel framing with plain 40 mm lap joint complete all as specified and directed.

Dismantling of roof AC sheeting any type (corrugated/semi corrugated, etc) in roof covering complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws complete all as specified and as directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, hold fast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed.

Dismantling of timber scantlings 40 Sqcm and over in section in any position and in any situation. (unframed work) complete all as specified and as directed.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O complete all as specified and as directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded including taking down old existing window complete all as specified and directed.

S&F steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old existing window complete all as specified and directed.

S&F ventilators, fixed type, with glazing bars including taking down old existing window complete all as specified and directed.

S&F in repair 1.00 mm wall thickness stainless steel 202 Gde drapery rod with including brackets, decorative finials at both ends complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) for sub base to receive the screed complete all as specified and as directed.

M&L hard core of broken brick gauge n.exc 63mm complete all as specified and as directed.

M & L for PCC 1:4:8 100 mm thick, type D-2, using 40mm graded stone aggregate as in sub base or leveling course of floor etc complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) 75 mm thick as in plinth protection surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment including demolition of existing old unserviceable tiles complete all as specified and as directed.

M&L for glazed ceramic tiles coloured size of size 200 x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match on and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of old unserviceable existing tiles complete all as specified and directed.

M&L non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old unserviceable existing tiles complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over 15 mm thick rendering in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

Use and waste of formwork to soffits of RCC shelves and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slab and shelves supported on walls complete all as specified and as directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins arches pillars etc. complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed.

Taking down of cement or cement lime plaster any description from brick or stone wall, ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L 10 mm thick plaster in CM (1:4) on ceiling on fair faces of concrete surfaces complete all as specified and directed.

M&L rendering 15 mm thick cement plaster in CM 1:6 on brick & concrete surfaces and finished even and smooth (without using extra cement) all as specified and directed. Note:- Rendering will be done in two layers complete.1st layer will be 10 mm thick and 2nd layer will be 5 mm thick.

M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound, finished fair faces of brick/concrete surfaces even and fair without using extra cement complete all as specified and as directed. Note:- (i) Rendering will be done in two layers complete.1st layer will be 10 mm thick and 2nd layer will be 5 mm thick. (ii) WPC will be measured and paid separately.

Supply only liquid water proofing compound.

M&L for applying two coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of new plastered/un plastered surfaces and providing two coats of cement base paint as in walls complete all as specified and directed.

M&L for preparation of new plastered/un plastered surfaces and providing two coats of oil bound distemper as in walls complete all as specified and directed.

M&L for preparation of wall and applying wall care putty 1.00 to 1.50 mm thick to make the surface smooth complete all as specified and as directed.

M&L for preparation of old plastered/un plastered surfaces and providing two coats of cement base paint as in walls complete all as specified and directed.

M&L for preparation of old plastered/un plastered surfaces and providing two coats of oil bound distemper as in walls complete all as specified and directed.

M & L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

S&F in repair half stall china urinals (wall type) complete including plugs, bedding urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including automatic flushing cistern with brackets flush pipe and union for discharge pipe including concealed spindle exclusive of fixing supply pipe to flush system trap and waste pipe etc complete all as specified and directed.

S & F in repair 10 liter capacity PVC low level flush cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated guard and railing size 500X125mm with brass bracket complete all as specified and as directed.

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring fixed on wall complete all as specified and as directed.

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, joints laid in trenches complete all as specified and as directed.

S & F in repair UPVC (SWR) bend, 110 mm bore' complete all as specified and as directed.

S & F in repair UPVC (SWR) junction single, (Single T) equal or un equal, 110 mm bore with access door complete all as specified and as directed.

S&F in repair stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including nut and bolts and securing ends of stay to wall or roof for 75/100 mm bore CI pipe grouted in PCC 1:2:4 complete all as specified and as directed.

Demolition of cement Concrete (unreinforced) in ground floors and paving’s n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

BLANK

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for brick work with sub class 'B' old size brick straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

All as per item No 65 above but except bricks.

M&L for walling of random rubble, uncrossed, well bounded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

All as per Item No 67 above but except stone.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed.

M&L for Cement concrete 1:2:4 B-0 (using 12.5 mm graded stone aggregate) in coping, bed plates and chamfered angles and throating etc complete all as specified.

Demolition of cement concrete (reinforced) reinforcement cut as required to facilitate demolition in ground floor and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for providing precast cement concrete(1:2:4), type B-1, using 20mm graded aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face set in cement mortar 1:4 including necessary form work complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) 150mm bore set in cement mortar complete all as specified and directed.

M&L for 300 mm dia (internal bore) Reinforced concrete pipes, class NP 3, laid and jointed complete with collars all as specified and directed.

M&L for cutting of road as required (approx 9.25m each length) for laying RCC pipe line including repair/make good with filling of earth, boulders, WBM, BM etc. with top surface finished with 30mm thick ready mixed patch filter, complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc complete all as specified and as directed.

M&L for coloured pre polished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar 200 mm internal dia complete all as specified and as directed.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and directed.

M&L for 200 mm internal dia salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed.

M&L for 200 mm dia (internal bore) Reinforced concrete pipes, class NP-3, laid and jointed complete with collars complete all as specified and as directed.

M&L for concrete bed to drain pipes 200 mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete type C-2 1:3:6 complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4, surface finished even and smooth without using extra cement surface finished even and smooth complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exc 25 CM thick complete all as specified and directed.

Removing excavated material n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed.

Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

M&L for construction of 100 users Septic tank as per drawing No. TD/217 of HQ CE Bareilly Zone complete all as specified in PS-II here in after.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or re fixing or removal to Store measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed.

S&F in repair cast iron Spun pipe 75 mm bore soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified.

S&F in repair Cast iron Spun pipe 100 mm bore soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified.

S&F in repair cast iron bends with oval access door 75 mm bore (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F in repair Cast iron Bends with oval access door 100 mm bore (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F in repair Cast iron 75 mm bore Branch pieces access door, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F in repair Cast iron 100 mm bore Branch pieces access door, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F in repair stack clamps for 75 mm bore Cast iron pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F in repair stack clamps for 100 mm bore Cast iron pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multi stranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire up to common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls, floors etc complete all as specified and directed by Engr.-in-charge of following :-

For one light and fan point controlled by one switch.

For one 5 pin socket out let 5/6 Amps on same board.

For one 5 pin socket out let 5/6 Amps on indent board.

All as per item No 100 here in before but with cable 2.5 sqmm (nominal area) multi stranded FRLS copper wire unsheathed for one 5 pin socket out let 15/16 Amps on independent board including continuous earth wire PVC insulated 2.5 sqmm copper FRLS multi stranded conductor connecting to common earth and earth dolly complete.

S&F ceiling rose surface bakelite three terminal complete all as specified and directed.

S&F Switch piano flush button single pole one way 5/6 Amp complete all as specified and as directed.

S & Fix Socket outlet 3 pin, 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and as directed.

Supply and fix Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and as directed.

Supply and fix Switch piano; flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and as directed.

S&F electronic step rotary type fan regulator of 100 Watt capacity 240 volts, AC 50Hz complete all as specified and directed.

S&F, 15 mm bore, 900 mm long down rod made of medium grade galvanised iron pipe including drilling of hole, cutting of slot etc complete all as specified and as directed.

S&F Lamp holder including LED Bulb 9W/10W PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F LED tube light fitting batten type all in one single phase 20/22 W with lamp 6500/4000 K complete pre-wired all accessories complete all as specified and as directed.

Supply & fixing security light fitting LED type 25 Watt of die-cast IP 66 aluminium housing, LED 6000K lenses type and toughened glass having separate surge protector 10 KV, efficiency of minimum 100 lumens/watt, including adaptor (if any) required to fix with existing bracket of min 40 mm dia complete with all accessories all as directed including taking down existing unserviceable fitting complete all as specified and as directed.

S&F flood light fittings epoxy powder coated die-cast aluminium housing IP66 flood light with high power LED's as light sources of 60 watt or higher size LED , Glass cover complete all as specified and directed.

M & L for taking down fan, sealing cable end, dismantling blades and removing fan and blades to store including painting with two coat of synthetic enamel paint over one coat of primer and re fixing the complete all as specified and as directed.

Taking down sub main wiring of any size any type and in any position metallic/non metallic PVC conduit of wooden batten complete all as specified and directed.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multi stranded of size 6 Sqmm (nominal area) drawing in and including 20 mm dia or higher medium duty PVC concealed conduit/flexible conduit where required and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multi stranded of size 6 Sqmm as earth wire up to common earth and connected to earth dolly complete.

S & F sheet metal enclosure TPN for DB's when MCB's to be used 4 way with 200 amps bus bar and double door complete all as specified and directed.

S & F sheet metal enclosure SPN for DB's when MCB's to be used 8 way with 200 amps bus bar and double door complete all as specified and directed.

S & F MCB TPN 40 to 63 Amp 415 Volts complete, including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SPN 40 Amps, 240 volts 'B' series 16 KA, including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 32 Amps, 'B' series 10 KA including connection with suitable size copper lugs complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe etc complete all as specified and directed.

AYUSH CONSTRUCTION COMPANY

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS

M/s RP AGRAWAL

M/S C S AITHANI