Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹40.9 L
EMD Value
₹41,000
Closing Date
16 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, District R and B Division, Vadodara
Additional and Alteration to Court building at Waghodia Ta. Waghodia Dist. Vadodara (Colour, Plaster, Water proofing, Drainage and other Misc. Civil works)
363200
12 of 2026-2027
Open
Civil - All
Works
Vadodara
9 documents required · 9 mandatory
₹1,500
Executive Engineer, District (R and B) Division, Vadodara
₹41,000
5 Nov 2026
5 Nov 2026
5 Nov 2026
16 Nov 2026
5 Nov 2026
120 days
No. Figure Amount
1 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including 91.00 No. 187.52
chowkhats architraves, holdfasts and other attachment etc. complete and
stacking them within all lead and lift. (ii) Not exceeding 3 Sq.M. in area.
2 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including 11.00 No. 251.10
chowkhats architraves, holdfasts and other attachment etc. complete and
stacking them within all lead and lift. (i) exceeding 3 Sq.M. in area.
3 Dismentling steel work including distempering and stacking the materials with 2264.40 Kg. 3.76
all lead and lift.
4 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable 25.21 Sq.m. 47.94
materials and disposal of unserviceable materials with all lead and lift.
5 Demolition of terrace including stacking of serviceable materials and disposal of 28.00 Sq.m. 63.76
unserviceable materials with all lead and lift.(i) Brick tile covering.
6 Removing dry oil bound distemper by a washing and scraping and sand 6010.83 Sq.m. 11.26
papering the wall surface smooth including necessary repair to scratches
7 Demolition of brick work and stone masonry including stacking of serviceable 1.16 Cum 549.49
materials and disposal of unserviceable materials with all lead and lift. (ii) In
Cement Mortar.
8 Providing and laying brick work using common burnt clay building conventional 4.61 Cum 4396.56
type bricks having crushing strength not less than 35 Kg/sq.cm. in super
structure above floor two level in cement mortar 1:6 (1 cement : 6 fine sand)
including the cost of all materials and labour charges etc. complete.
9 Providing and laying half brick work using common burnt clay building 2.70 Sq.m. 732.92
conventional type bricks having crushing strength not less than 35 Kg/Sq.cm in
cement mortar 1:3 (1 cement : 3 coarse sand) with 2 Nos. of 6 mm Mild steel
round bars after every three course embedded in cement mortar in foundation
and plinth including the cost of all materials and labour charges etc. complete.
10 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6 0.25 Cum 3993.11
crushed stone aggregates 20 mm nominal size) and curing complete including
cost of formwork in (A) Wall Caps / Coping
11 Providing and laying controlled cement concrete M-200 and curing etc. 0.25 Cum 7230.59
complete including the cost of form work but excluding the cost of
reinforcement in (C) Slabs landings shelves balconies, lintel -chhaja, beams,
girders and cantilever up floor to level. (For Lintel)
12 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 680.00 Kg. 77.29
including bending, binding and placing in position complete upto all floor level.
13 Providing & fixing 40mm thick Single shutter flush door solid core finished with 14.91 Sq.m. 7514.40
both side 1 mm thick lamination both side like 'NOVAPAN 'or equivalent, of
natural wood grain shade as approved by this office having telephone black
granite 18 mm thick frame with double stone as per the instruction of Engineer
in charge with necessary SS hinges and fixtures etc. complete.
14 Providing & fixing 35 mm thick Single shutter flush door solid core finished with 82.32 Sq.m. 7065.96
both side 1 mm thick lamination both side like 'NOVAPAN 'or equivalent, of
natural wood grain shade as approved by this office having telephone black
granite 18 mm thick frame with double stone including fixed ventilation above
lintel level as per drawing and as per the instruction of Engineer in charge with
necessary SS hinges and fixtures etc. complete.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
15 Providing & fixing 30 mm thick FACTORY MADE SOLID PANEL PVC DOOR 3.36 Sq.m. 1146.37
SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness
and size of 19mm x 19mm for stiles and 15mm x 15 mm for top and bottom
rails. M.S. frame shall have a coat of steel primers of approved make and
manufacture, M.S. frame shall be covered with 5 mm thick heat moulded PVC
‘C’ channel of size 30 x 50 mm forming stiles, and 5mm thick 75mm wide PVC
sheets for top rail, lock rail and bottom rail on either side, and 10mm (5mm x 2)
thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail,
Panelling of 5 stiles and rails with 30mm wide x 5mm thick PVC sheet beading
on either side, and joined together with solvent cement adhesive,. An additional
5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘c’
channel using PVC solvent cement adhesive etc. complete as per direction of
Engineer in charge, manufacture’s specification and drawing.
16 Providing and fixing window having extruded aluminum colour anodized section 141.53 Sq.m. 3381.48
frame main outer size 95mm x 24mm x 1.17mm (@ Wt. 0.738 Kg/mt),
horizontal three track member size 92mm x 31.75mm x 1.30mm (@ Wt.
Kg/mt), vertical member of size 92mm 31.75mm x 1.50mm (@ Wt. 1.06 Kg/mt)
with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (@
Wt. of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (@ Wt.
of 0.456 kg / mt) with 5 mm thick transparent bronze colour tinted float glass
with powder coated aluminum fittings and fixtures and transparent silicon
sealant glass fixing including granite frame as per details etc. complete.
17 Providing and fixing hard drawn steel wire fabric 75mm x 25mm mesh or weight 29.85 Sq.m. 777.77
not less than 7.75 kg. per Sq.M. to window frames etc. including 60 x 20mm
beading of teak wood.
18 Providing and fixing 12 mm thick and 100mm wide pelmet of flat pressed 3 100.00 Rmt. 218.92
layer needed particle board solid core with 25 mm diametre alluminium curtain
Road and brackets including fixing with 25mm x 3mm M.S flat 10cm,long and
plugs etc.complete.
19 Providing and fixing M.S. grills of required pattern to wooden / Marble / Granite 254.75 Kg. 112.11
/ Stone frames of windows etc. with M.S. flats at required spacings and frame
alround, square or round bars with round headed bolts and nuts or by screws
(A) Ornamental Grill.
20 Dismentling sanitary fittings like wash basin, W.C. pan Indian and European 33.00 No. 404.37
type, flushing tank etc. including stacking the materials with all lead and lift.
21 Providing and laying marble stone slab flooring over 20mm (average)base of 12.11 Sq.m. 2188.15
cement mortar 1:6 (1 cement : 6 coarse sand)or L.M. 1:1.5 (1- lime putty : 1.5 -
coarse sand) laid and jointed with gray cement slurry including rubbing and
polishing complete. (A) Marble slab 25mm thick.
22 Providing and laying 24" x 24" vitrified 8 mm thick tiles flooring over 20mm 13.77 Sq.m. 1432.78
(average) base of cement mortar 1:6 (1 cement : 6 coarse sand) on new
surface or fixing on existing flooring by adhesive material including dismentaling
of existing flooring and jointed with color cement slurry including finished with
flush pointing & cleaning the surface etc. complete for anti skid.
23 Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 24'' in skirting, risers 73.29 Sq.m. 1169.98
of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse
sand) and jointed with white cement slurry for dedo.
24 Providing 15mm thick cement plaster in single coat on rough (similar) side of 129.12 Sq.m. 171.21
single or half brick walls for interior plastering upto floor two level and finished
even and smooth in cement mortar 1:4 (1 cement : 4 sand) including
galvanised iron chicken mesh complete.
25 Providing and fixing Granite of 18 to 20mm thick having minimum single piece 6.00 No. 9546.52
length of 210mm to be fixed on Walls to act as wash basin, including fixing the
same using cement mortar in proportion 1:1 etc. complete necessary groove in
walls by machine, front side round the edge and cutting hole in granite stone for
wash basin, Computer wire, including rubbing and polishing finishing jointed
with grey cement slurry including rubbing and polishing finishing etc. complete
with all labour & material & equipment etc. completed as directed by Engineer-
in-charge (A) Granite slab 18mm thick
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
26 Providing and laying broken china mosaic flooring for terrace using 12 mm to 28.00 Sq.m. 765.97
20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain
or slope and to be tempered to bring mortar creme out upto surface using white
cement including rounding off junctions and extending them upto 15 cm along
the wall, clearing with water and oxalic acid etc. as directed.
27 Providing and cement vata (10cm x 10cm size) quarter round in cement mortar 264.00 Rmt. 24.28
1:1 including neat cement finishing watering etc. complete.
28 Providing and laying BBCC of 75mm thick layer in C.M. (1:3) including spraying 24.30 Sq.m. 621.15
i.e. Perma or other with leveling complete for ready base of china mosaic
treatment.
29 Providing and fixing in position cowel went to pipes. (B) 75mm dia. as directed. 8.00 Each 393.04
30 Providing and carrying out repair of cracks in plastered wall surfaces by 1368.00 Sq.m. 284.82
opening cracks in V-groove shape, removing loose particles, cleaning with wire
brush and compressed air, applying approved primer, filling cracks with zycosil /
equivalent crack filler / elastomeric sealant, fixing fiber glass mesh
reinforcement where required, with SBR bonding agent, finishing flush with
existing surface, including curing, scaffolding, labour, tools, tackles,
transportation, disposal of debris and all incidental works complete as per PWD
specifications and direction by Engineer-in-charge.
31 Applying two coats of putty & two coats of primer of approved brand and 3345.86 Sq.m. 40.59
manufacture on new wall surface to give an even shade including thoroughly
brushing the surface free from mortar dropping and other foreign matter and
sand papered smooth. (For wall putty)
32 Applying two coats of putty & two coats of primer of approved brand and 1297.79 Sq.m. 42.72
manufacture on new wall surface to give an even shade including thoroughly
brushing the surface free from mortar dropping and other foreign matter and
sand papered smooth. (Ceiling Putty)
33 Wall painting two coats with plastic emulsion paint of approved brand and 3345.86 Sq.m. 80.87
manufacture on wall surfaces to give an even shade including throughly
brushing the surface free from mortar droppings and other foreign matter and
sand papered smooth. (Interior Wall Paint)
34 Wall painting two coats with plastic emulsion paint of approved brand and 1297.79 Sq.m. 83.00
manufacture on wall surfaces to give an even shade including throughly
brushing the surface free from mortar droppings and other foreign matter and
sand papered smooth on ceiling. (Ceiling Paint)
35 Finishing wall with weather proof exterior emulsion paint on wall surface (two 1368.00 Sq.m. 117.40
coats) to give an required shape even shade after thoroughly brushing surface
to remove all dirt, dust and remains of loose powdered materials etc. complete.
36 Finishing wall with water proofing cement paint of on wall surfaces (two coats) 4643.65 Sq.m. 59.53
to give an approved brand and manufacture and of required shape even shade
after thoroughly brushing the surface to remove all dirt and remains of loose
powered materials.
37 Providing & laying bevelled edge mirror 600mm x 450mm. 30.00 No. 233.67
38 Door closers (Heavy type of 765 number) Hardwire or Everite Prabhat or 50.00 No. 470.76
equivalent.
39 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. 150.00 Rmt. 148.12
U.P.V.C pipe (Sch-40) for cold water including fitting as approved by Engineer
in charge. Pipe shall be fixed on the wall with held of clamp at every two meter
c/c or shall be concealed as directed including necessary fitting etc. including
testing of pipe and joints and fixing the same with adhesive solvent including
cost of all materials.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
40 Providing, laying and jointing in true line and level I.S.I. mark 32mm dia. 150.00 Rmt. 119.15
U.P.V.C pipe (Sch-40) for cold water including fitting as approved by Engineer
in charge. Pipe shall be fixed on the wall with held of clamp at every two meter
c/c or shall be concealed as directed including necessary fitting etc. including
testing of pipe and joints and fixing the same with adhesive solvent including
cost of all materials.
41 Providing, laying and jointing in true line and level I.S.I. mark 25mm dia. 150.00 Rmt. 91.84
U.P.V.C pipe (Sch-40) for cold water including fitting as approved by Engineer
in charge. Pipe shall be fixed on the wall with held of clamp at every two meter
c/c or shall be concealed as directed including necessary fitting etc. including
testing of pipe and joints and fixing the same with adhesive solvent including
cost of all materials.
42 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. 80.00 Rmt. 72.65
U.P.V.C pipe (Sch-40) for cold water including fitting as approved by Engineer
in charge. Pipe shall be fixed on the wall with held of clamp at every two meter
c/c or shall be concealed as directed including necessary fitting etc. including
testing of pipe and joints and fixing the same with adhesive solvent including
cost of all materials.
43 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. mark 40.00 Rmt. 660.58
C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal
for potable water of following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc. complete. (F) 50 mm dia.
44 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. mark 40.00 Rmt. 253.82
C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal
for potable water of following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc. complete. (B) 25 mm dia.
45 Providing, laying and jointing in true line and level I.S.I. mark 160mm diameter 70.00 Rmt. 834.38
U.P.V.C. (Type B) confirming to IS 13592 -1992 with one end plain and other
end socketed with rubbering & fitting confirming to ISI 14735-1999 of approved
make for drainage system pipe line, pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size
160mm diameter x 210mm length x 196mm high at every 2000mm center to
center or shall be concealed in wall as directed including necessary fitting such
as bends, shoes etc. including testing of pipe and joints and jointed with
adhesive solvent cement including cost of all materials.
46 Providing, laying and jointing in true line and level I.S.I. mark 110mm diameter 98.50 Rmt. 856.03
U.P.V.C. SWR Type B pipe confirming to IS 13592 -1992 with one end plain
and other end socketed with rubbering & fitting confirming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall be jointed with each
other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of
the size 110mm diameter x 149mm length x 145mm high at every 2000mm
center to center or shall be concealed in wall as directed including necessary
fitting such as bends, shoes etc. including testing of pipe and joints and jointed
with adhesive solvent cement including cost of all materials.
47 Providing and fixing screw down bib taps of following size (A) Brass screw 51.00 No. 186.83
down bib tap polished bright (i) 15mm dia. as approved by Engineer in charge
for all floors.
48 Providing and fixing screw down bib taps of following size (A) Brass screw 18.00 No. 214.81
down bib tap polished bright (ii) 20mm dia. as approved by Engineer in charge
for all floors.
49 Providing and fixing pillar tap, capstan head screw down high pressure with 39.00 No. 354.69
screw, shanks and back nuts (B) 20mm dia. as directed by Engineer in charge.
50 Providing and fixing chromium plated brass half turn flush cock of approved 22.00 No. 263.77
quality including fixing in pipe line etc. complete. (ii) 25mm dia. as directed by
Engineer in charge.
51 Providing and fixing Gun metal check or non return full way wheel valve. 40 mm 12.00 No. 663.43
52 Providing and fixing Gun metal check or non return full way wheel valve. (C) 25 6.00 No. 420.63
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
53 Providing and fixing C.P. brass towel rail complete with C.P. brass brackets 5.00 No. 616.42
fixed to wooden plugs with C.P. brass screws.(B) 600 mm x 20 mm size.
54 Providing and laying wash down water closet (European type Wall hung W.C. 8.00 No. 10844.37
pan) Florentine series FLS-WHT 0111B including providing and fixing
metropole flush cock seat cover, jet wash etc. complete unit of jaquar branch
(or equivalent) including installing and fitting as per manufacturers standards by
skilled trained plumber including testing etc. complete quality and brand as
approved by Engineer in charge.
55 Jet spray heavy duty with S.S. Braided hose 60 cm long 10.00 No. 308.99
56 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100mm 16.00 No. 572.32
diameter with jail of the following nominal diameter of self cleansing design with
C.I. screwed down of hinged grating including the cost of cutting and making
good the walls.
57 Labour work for Plumbing work. 40.00 No. 1335.22
58 Excavation for foundation upto 1.50 mt depth including sorting out and stacking 110.00 Cum 219.20
of useful materials and disposing the excavated stuff for all lead and lift for all
sorts of soil.
59 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 5.25 Cum 4188.47
4 graded stone aggregates 20 mm nominal size) and curing complete excluding
cost of formwork and reinforcement for reinforced concrete work in (A)
Foundations, footings, base or columns and mass concrete. (For PCC)
60 Providing and laying polished Kota stone slab flooring over 20mm (average) 27.62 Sq.m. 1001.14
thick base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1.1.5 (1-
Lime putty : 1.5 - coarse sand) laid over and jointed with grey cement slurry
mixed with pigment to match the shade of slab including rubbing and polishing
etc. complete. (A) 25mm thick
61 Filling available excavated earth (excluding rock) in trenches plinth side of 56.96 Cum 133.65
foundation etc. in layer not exceeding 20 cm in depth consolidation each
deposited layer by ramming and watering etc. complete.
62 Providing and fixing precast Rubber Dye / steel Dye inter locking concrete block 18.60 Sq.m. 704.07
60mm thick with grade of concrete M-300 pneumatic compressed / vibrated
mechanically and as per approved design confirming to IS 15658 :
including 35 mm sand layer for levelling and filling the joint with sand in proper
line and level as per guidelines of IRC : SP 63-2018 etc. complete.
63 Constructing brick masonary chamber for under ground C.I. Inspection 4.00 No. 3660.76
chamber and bends with bricks having crushing strength not less than
Kg/cm2 in C.M. 1:5 C.I. cover with frame (light duty) 455 mm x 610 mm.
internal dimensions, total weight of cover with frame to be not less than 38 Kgs.
weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix
(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm. size) foundation
concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3 finished
smooth with a floating coat of neat cement on walls and bed concrete
etc.complete. (ii) Inside dimensions 500mm x 700 mm and 450mm deep for
pipe line with one or two inlets.
64 Providing and fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet 105.00 Sq.m. 1441.90
fixed with hilti screw and rubber silicon sealer and alluminium strip of size 50 x
3 mm etc complete as directed by Engineer in charge.
65 Providing and fixing Aluminium partition system made from powder coated 31.05 Sq.m. 2118.98
aluminum section of 63.50 x 38.10 x1.2mm and other section which is
necessary including 8 mm thick glass fitting with beading clip having single side
film for vision barrier and bottom panel with PVC sheet as per design and all
the joint filled with silicon chemical neat and clean, all item must be executed as
per directed by engineer incharge and specification.
66 Excavation for foundation for depth from 1.5 mt. to 3.0 mt. including sorting out 47.00 Cum 166.44
and stacking of useful materials and disposing off the excavated stuff upto
Meter lead (B) Dense or Hard soil.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
67 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out 15.40 Cum 178.58
and stacking of useful materials and disposing off the excavated stuff upto
Meter lead (B) Dense or Hard soil.
68 Filling in plinth with sand under floors including watering, ramming, 3.70 Cum 471.69
consolidating and dressing complete.
69 Providing and laying controlled cement concrete M-150 for curing complete 3.10 Cum 3864.13
excluding cost of formwork and reinforcement for reinforced concrete work in
(A) Foundations, footings, base of columns and mass concrete.
70 Providing and laying brick work using common burnt clay building conventional 12.00 Cum 4121.55
type bricks having crushing strength not less than 35 Kg./Sq.cm. in foundation
and plinth in cement mortar 1:6 (1 cement : 6 fine sand) including the cost of all
materials and labour charges etc. complete.
71 Half brick thick honey comb brick work with common burnt clay building bricks 69.04 Sq.m. 315.26
having crushing strength not less than 35 Kg/Sq.cm. (i) In cement mortar 1:4 (1
cement : 4 coarse sand)
72 Providing and laying controlled cement concrete M-200 and curing etc. 2.30 Cum 6432.69
complete including the cost of form work but excluding the cost of
reinforcement in (C) Slabs landings shelves balconies, lintel-chhaja, beams,
girders and cantilever up floor to level. (For G.F. slab)
73 Providing and laying controlled cement concrete M-200 and curing etc. 1.10 Cum 6336.74
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in beam upto floor two level for G.F.
74 Providing 20mm thick sand faced cement plaster on walls upto height 10 80.50 Sq.m. 337.52
metres above ground level consisting of 12mm thick backing coat of C.M. 1:3
(1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-
sand) etc. complete (For Exterior Plaster)
75 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not 2.00 No. 958.17
less than 35 Kg.
76 Providing, laying (to level or slopes) and jointing reinforced concrete light duty 49.00 Rmt. 254.89
non-pressure pipes I.S. class NP-2 of the following internal diameter with
collars and butt ends prepared for collar joints including testing of joints
complete. (B) 150mm
77 Constructing brick masonry chamber for underground C.I. Inspection chamber 2.00 No. 2932.93
and bends with bricks having crushing strength not less than 35 Kg/Cm2 in
C.M. 1:5 C.I. cover with frame (light duty) 455mm x 610mm internal dimensions
total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)
and Wt. of frame 15Kg.) (R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm size) foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat
of neat cement on walls and bed concrete etc. complete. (i) Inside dimensions
455mm x 610mm and 450mm deep for single pipe line.
78 Constructing brick masonry chamber for underground C.I. Inspection chamber 2.00 No. 7180.44
and bends with bricks having crushing strength not less than 35 Kg/Cm2 in
C.M. 1:5 C.I. cover with frame (light duty) 455mm x 610mm internal dimensions
total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)
and Wt. of frame 15Kg.) (R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm size) foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat
of neat cement on walls and bed concrete etc. complete. (iii) Inside dimensions
600mm x 850 mm and 450mm deep for pipe lines with three or more inlets.
79 Providing, laying (to level or slopes) and jointing reinforced concrete light duty 30.00 Rmt. 356.73
non-pressure pipes I.S. class NP2 of the following internal diameter with collars
and butt ends prepared for collar joints including testing of joints complete. (C)
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
80 Filling in foundation and plinth with brick bats, chhara in layers of 20cm. 6.20 Cum 615.57
thickness including watering, ramming and consolidating etc. complete.
81 Providing and laying controlled cement concrete M-250 and finishing smooth 1.30 Cum 4906.58
with curing etc. complete, including the cost of formwork but excluding the cost
of reinforcement for R.C.C. work in Foundations, footings base of columns &
mass concrete. (For Footing)
82 Providing and fixing PVC SWR Nahni trap IS-14735 for drain - 75 mm diameter 10.00 No. 560.90
with jali of the following nominal diameter of self cleansing design with C.I
screwed down or hinged grating including the cost of cutting and making good
the walls.
TOTAL Rs.
i.e. Rs. Fourty lacs Ninety Four thousand Five hundred Twenty Five and Ninety Six paisa only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-
Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is
a change as per actual mix design the cost of difference of cement consumption have been deducted from the
rate of original item at the rate of input rate mentioned in all the tender.
5. The Contractor will have to submit the all required mix design at his own cost before execution as
directed and to be approved from the Engineer in charge.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and
found order.
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Dist. (R & B) Sub Division No. 2, Dist. (R & B) Division, Dist. (R & B) Division,
Vadodara Vadodara Vadodara
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ.pdf
GRs - Buildings.pdf
NIT.pdf
SBD - Tender Form.pdf
Specification Index.pdf
Technical Specifications.pdf
Test Sch.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .