Tender ID

DEFPROC

Active

Works

Civil Works

8591/E8 SPL REPAIR FOR REPLACEMENT OF UNSV/CORRODED WATER PIPELINES AND CONNECTED ITEMS IN FAFA, DCA COLONY AND JRC MAP QTR UNDER GE (EAST) BAREILLY

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

GE (EAST) BAREILLY | Bareilly, Uttar Pradesh

Amount: ₹47.9 LCloses: 11 Nov 20262d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published21 Oct 2026
Submission Opens4 Nov 2026
Closes11 Nov 2026
Bid Opening18 Nov 2026

Tender Value

₹47.9 L

EMD Value

₹95,800

Closing Date

11 Nov 2026, 6:00 pm2d left

Tender Inviting Organisation

Name

GE (EAST) BAREILLY

Address

GE (EAST) BAREILLY NEAR SHAHJAHANPUR ROAD

Work Description

8591/E8 SPL REPAIR FOR REPLACEMENT OF UNSV/CORRODED WATER PIPELINES AND CONNECTED ITEMS IN FAFA, DCA COLONY AND JRC MAP QTR UNDER GE (EAST) BAREILLY

Tender Information

Tender ID

2026_MES_794974_1

Reference Number

8591/E8

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

180 days

Location

GE (EAST) BAREILLY

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScanned copy of application and of DD/bankers cheque as cost of tender and EMD (unenlisted contracto (.pdf)

RequiredScanned copy of enlistment letter in MES (.pdf)

RequiredScanned copy of Provident fund Code Number and GST registration Number (.pdf)

RequiredCopy of all credentials required for bidders not enlisted in MES (.pdf)

RequiredList of present residual all work in hand in case of E Class contractor (.pdf)

Finance

RequiredBOQ (.xls)

RequiredTender Documents (.pdf)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Exemption Allowed

Yes

Tender Fee Payable To

GE (EAST) BAREILLY

EMD Fee Amount

₹95,800

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

21 Oct 2026

Published

21 Oct 2026

Bid Opening

18 Nov 2026

Download Starts

21 Oct 2026

Download Ends

11 Nov 2026

Submission Starts

4 Nov 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (26 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supply, Laying, jointing and testing GI Pipe medium grade including all fittings such as bend, tee, elbow, union, reducer, GI clamp etc, laid in trenches, on wall using GI U clamp, making hole on wall and making disturbed/damaged surface good using PCC and including dismantling and taking down unserviceable / cracked steel tubing with all fittings of the following sizes as complete all as specified and as directed at site of the following sizes :- Note :- 1. Rate quoted shall deemed to be inclusive of all type of GI fittings, clamps required for connection of existing and new pipe. 2. Excavation and other earth work shall be measured and paid separtely for respective items.
1.01	25 mm dia	1,600	RM	-	-
1.02	20 mm dia	2,700	RM	-	-
1.03	15 mm dia	250	RM	-	-
2S&F Gun-metal, globe or Gate Valve with iron wheel head, screwed bothe ends for iron pipe, ISI marked complete all as specified and directed of the following sizes:-
2.01	50 mm dia	5	Each	-	-
2.02	25mm dia	150	Each	-	-
2.03	20mm dia	270	Each	-	-
3Supply & laying/fixing Floor & Trench,3 layered (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded PP-R (polypropylene Random Co-Polymer) pipes, ISI marked including plain PP-R fittings and brass threaded PP-R fittings such as flanges, elbow, bend, sockets, tee clamps etc including cutting pipes for inserting fittings as required at site and testing of joints including taking out old pipes complete all as specified and as directed of size:- Note : Rate quoted shall deemed to be inclusive of cutting/screwing of existing pipe or new pipe for connection and all type of fittings required as per site requirement.
3.01	PN-16, 63 mm OD (SDR– 7.4)	2,750	RM	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.92 MB

Work Item Documents

BOQ_891601.xls

BOQ • 3.17 MB

Tender8591.pdf

Tender Documents • 2.14 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supply, Laying, jointing and testing GI Pipe medium grade including all fittings such as bend, tee, elbow, union, reducer, GI clamp etc, laid in trenches, on wall using GI U clamp, making hole on wall and making disturbed/damaged surface good using PCC and including dismantling and taking down unserviceable / cracked steel tubing with all fittings of the following sizes as complete all as specified and as directed at site of the following sizes :- Note :- 1. Rate quoted shall deemed to be inclusive of all type of GI fittings, clamps required for connection of existing and new pipe. 2. Excavation and other earth work shall be measured and paid separtely for respective items.
1.01	25 mm dia	1,600	RM	-	-
1.02	20 mm dia	2,700	RM	-	-
1.03	15 mm dia	250	RM	-	-
2S&F Gun-metal, globe or Gate Valve with iron wheel head, screwed bothe ends for iron pipe, ISI marked complete all as specified and directed of the following sizes:-
2.01	50 mm dia	5	Each	-	-
2.02	25mm dia	150	Each	-	-
2.03	20mm dia	270	Each	-	-
3Supply & laying/fixing Floor & Trench,3 layered (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded PP-R (polypropylene Random Co-Polymer) pipes, ISI marked including plain PP-R fittings and brass threaded PP-R fittings such as flanges, elbow, bend, sockets, tee clamps etc including cutting pipes for inserting fittings as required at site and testing of joints including taking out old pipes complete all as specified and as directed of size:- Note : Rate quoted shall deemed to be inclusive of cutting/screwing of existing pipe or new pipe for connection and all type of fittings required as per site requirement.
3.01	PN-16, 63 mm OD (SDR– 7.4)	2,750	RM	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supply, Laying, jointing and testing GI Pipe medium grade including all fittings such as bend, tee, elbow, union, reducer, GI clamp etc, laid in trenches, on wall using GI U clamp, making hole on wall and making disturbed/damaged surface good using PCC and including dismantling and taking down unserviceable / cracked steel tubing with all fittings of the following sizes as complete all as specified and as directed at site of the following sizes :- Note :- 1. Rate quoted shall deemed to be inclusive of all type of GI fittings, clamps required for connection of existing and new pipe. 2. Excavation and other earth work shall be measured and paid separtely for respective items.

1.01

25 mm dia

1,600

1.02

20 mm dia

2,700

1.03

15 mm dia

250

2S&F Gun-metal, globe or Gate Valve with iron wheel head, screwed bothe ends for iron pipe, ISI marked complete all as specified and directed of the following sizes:-

2.01

50 mm dia

Each

2.02

25mm dia

150

Each

2.03

20mm dia

270

Each

3Supply & laying/fixing Floor & Trench,3 layered (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded PP-R (polypropylene Random Co-Polymer) pipes, ISI marked including plain PP-R fittings and brass threaded PP-R fittings such as flanges, elbow, bend, sockets, tee clamps etc including cutting pipes for inserting fittings as required at site and testing of joints including taking out old pipes complete all as specified and as directed of size:- Note : Rate quoted shall deemed to be inclusive of cutting/screwing of existing pipe or new pipe for connection and all type of fittings required as per site requirement.

3.01

PN-16, 63 mm OD (SDR– 7.4)

2,750