SPECIAL REPAIRS TO KOHLI BLOCK (A WING)(BLDG NO. P-152) AT NAVAL BASE, KOCHI

Amount

Taking down cement or cement lime plaster, any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and as directed.

M & L Pre cast cement concrete block masonry Type C1 20mm graded aggregate 1:3:6 with solid blocks, exec 10cm in width and setting in CM 1:6 complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:3 with 3% WPC on fair faces of brick work or concrete surfaces of water tank, finished even & smooth complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even & fair complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of whitewash complete all as specified and as directed.

M&L for preparation of new plastered surfcaes and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling and applying one coat of whitewash complete all as specified and as directed.

M&L Distmepering two coats of OBD over a coat of Acrylic primer including preparation of new surfaces of walls and applying 1mm thick wall care putty including preparation of surface complete all as specified and as directed.(Make: Asian- Tractor acrylic/ Berger-Bison/ Dulex- supersmooth)

M&L for preparation new plastered external wall surfaces and apply one coat of water proofing primer to antifungal paint over 1.5mm thick exterior wall care putty and allowed to dry overnight before applying first coat of wethaer proof (anti fungal paint) complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for complete removal of existing suracfe finishes of external wall,preparation of surface and apply one coat of water proofing primer to anti fungal paint over 1.5mm thick exterior wall care putty and allowed to dry over night before applying first coat of weather proof (anti fungal paint) complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of weather proof paint (anti fungal paint) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac )on primed wall surface using spray application or mechanical means, to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.

M&L for application of second coat of weather proof paint (anti fungal paint) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac ) over first coat on wall surface using spray application or mechanical means, to get a smooth and tint free surface complete all as specified and as directed. Note for item No. 11 to 14: (i) The old surface shall prepared using mechanical ways I.e., jet-spray, grinding etc., in such a manner that there should not be any impression of dent, all cracks to be filled with crack filler, water proofing primer in shaft/dampness areas and it should be made even all as per manufacturers instruction before application of putty base primer/base coat and emulsion paint. (ii). The work shall be got executed through authorised applicator of approved manufacturer. Authorisation letter of applicator shall be produced by the contractor before starting the work (iii) The contractor shall submit performance Guarantee certificate provided by manufacturer for a period of FIVE years from the certified date of completion of entire work. (iv) After preparation of surface exterior putty to be applied to make surface even to receive base coat and two coat of emulsion paint, the same shall be got approved by GE before each stage.

M&L for preparation of old wooden surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and as directed. .(Make: Asian/ Berger/ Dulex)

S&F in repairs low level dual type flushing cistern of 10 ltrs capacity PVC valveless, syphonic action type white with inlet ball valve float and handle complete all as specified.(Make: Cera/ Parryware/ Jaguar)

M&L PVC floor trap with grating including jointing to waste pipe in cement joint, dia of outlet 100mm complete in repairs complete all as specified and as directed.

M&L PVC nahani trap with grating including jointing to waste pipe in cement joint, dia of outlet 100mm complete in repairs complete all as specified and as directed.

S & F in repair in repair vitreous china WHB white with flat back of size 550x400mm with bracket including waste coupling and 32mm PVC waste pipe complete all as specified and directed.

S & F in repairs Pillar tap 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down high pressure with long screws shanks and fly nuts screwed for iron pipes complete all as specified and as directed.(Make: Cera/ Parryware/ Jaguar)

S & F in repairs curtain rod 20 mm dia, anodised aluminium alloy fixed complete all as specified and as directed. Note: Colour and design should be as approved by User.

S & F in repairs bracket for fixing curtain rods complete all as specified and as directed.

S & F in repair Tubular towel rail brass chromium plated, 60cm long with brackets, 'D' type 20mm dia fixed complete all as specified and as directed.(Make: Cera/ Parryware/ Jaguar).

S & F in repairs Soap dish vitreous china coloured appx size 160 x 160x90mm recessed type fixed to plugs with CP brass screws complete all as specified and as directed.(Make: Cera/ Parryware/ Jaguar)

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Make: Cera/ Parryware/ Jaguar)

S & F PVC connection 15mm bore 45cm long with brass coupling complete all as specified and as directed..

Dismantling of PVC or reinforeced concrete drain pipes any dia , jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.

S&F 75 mm PVC (SWR) pipes single scoketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single scoketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC bends 75 mm dia complete all as specified and as directed.

S&F PVC(SWR) bends 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) branch piece single (single Y) equal or un equal 75 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) branch piece single (single Y) equal or un equal 110 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) queal or unequal 75 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) queal or unequal 110 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) Vent cowl 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) Vent cowl 110 mm dia complete all as specified and as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M/L screed bed or bedding layer of mortar 15mm in CM 1:6 for laying floor finishes,platforms etc complete all as specified and as directed.

M/L Rendering in CM 1:4, 10mm thick for laying tiles on skirting/dado complete all as specified and as directed.

M&L glazed ceramic coloured tiles (600mm x 300mm) x 7 to 8mm thick in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match on vertical surfaces complete all as specified and as directed.. (Make: Somany/ HR Johnson/ Kajaria). Note:- Colour and design shall be as spproved by User

M&L aluminium angle section 40x40x3.5mm thick on edges of wall tiling complete all as specified and as directed.

M&L for coloured non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floorsset and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Make: Somany/ HR Johnson/ Kajaria)

Taking down chowkats with shutter n.exc 1.5 Sqm each with or with out guard bars (without taking off shutters from the frame) complete all as specified and as directed..

Taking down chowkats with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and as directed..

S & F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in openings complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as specified complete all as specified and as directed.

S&F S/S Butt hinges 100mm , heavy weight all as specified and directed.

M&L for 150mm size aluminum handle (ISI Marked) cast type anodized, fixed complete all as specified and directed.

M&L for 150mm size aluminum tower bolt (ISI Marked) anodized, fixed complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt 200mmwith hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed .

S&F IInd class hardwood plain solid straight chowkhat and frame wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Supply and fixing factory made UPVC any colour(as approved by user) Casement window double panel one opening outside where glass is fixed and another opening inside where wire mesh fixed with provision for grill (measured separately) fixing in middle with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame n. less than 67 x 64 mm & sash n. less than 67 x 114 mm both having wall thickness of 2.3 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 2.5 sqm.) comprising of uPVC multi chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately)

S & F 35mm thick IInd Class hard wood rail and stail Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other onnected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each

S & F aluminium Decogrill (DG 104) fixed to upvc window/ ventilator frame with aluminium bidding complete all as specifed. Make : JINDAL/HINDALCO or equivalent manufactures from list of manufactures.

S & F sheet glasses,plain 4.00mm thick glazing all with glazing clip & rubber gaskets etc exc 0.5 sqm in each pane complete all as specified and directed.

S & F figured glasses pin head type, 4.0mm thick glazing all with aluminum beading, glazing pin etc n exc 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L demolition of cement concrete (unreinforced) in any position and of any description not otherwise specifically provided for sunken floors complete all as specified and as directed.

M & L PCC1:3:6 type C2 using 20mm graded stone aggregate, 75mm thick, as in plinth protection,floor etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of guard bars and handrail complete all as specified and as directed.

S&F Framed work such as grills, gratings, posts/struts in fencing ,angle or Tee section etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and as directed. ( Make:Tata steel/ Jintal/JSW Steel LTD or equivalent from list of manufactures.)

S&F steel work conforming to Fe 290 (grade E 165) angle or Tee section fixed independenlty without convert plate including necessary cutting & drilling etc.

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed..

Supply, Providing and fixing suspended false ceiling consisiting of 12mm thick Gypsum seamless board suspended on GI frame work with staggered joints, GI frame work to consist GI perimeter channel 25mm x20mm of 22 gauge along perimeter of false ceiling. Channel section of 50x25mm of 22 gauge and at 300mm C/C throughout one way fixed with Serew/nut bolt and other direction 40 x 15mm x 22 gauge channel provided for interlocking with GI cleat and expansion fasteners including hangers 6mm dia G.I. fixed to roof truss, Boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the gypsum board with joining compound paper tape and two coat plasting emulsion paint over one coats of primer & one layer putty 3mm thick suitable for gypsum board. (As per the recommendation s/ practice) including necessary scaf folding and shuttering complete as directed as specified and directed .

Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, apron etc, laid bedded and pointed any mortar complete all as specified and as directed..

M/L screed bed or bedding layer of mortar 20mm in CM 1:6 for laying floor finishes,platforms etc complete all as specified and as directed.

M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L RCC 1:1.5:3 nominal mix as in slab complete all as specified and as directed.

Use and waste of form work for soffits of slabs rough finished flat surface of concrete complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

M&L for machine cut kota stone slab flooring 20-25mm thick(single pice for steps treads including nozing) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for kota stone slab 10-15mm thick in riser of steps, skirting, dado and pillar laid over cement screed including 20mm backing coat of CM 1:6 complete all as specified and as directed.

M&l 20 mm thick Marble strip laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete allas spcified as boarder to kota stone flooring complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M&L for 2 coat bitumen grade 85/25 applied hot to concrete surface at rate of 1.2 kg per sqm( one coat over the screed and one over APP sheet) complete all as specified and as directed.

M&L APP based polymeric membrance minimum weighing 3.6 Kg/ Sqm & minimum 3 mm thickness reinforced with polyster non woven fabric (wt not less than 150 gms/ sqm) land on primed surface by forced application complete all as specified.(Make: BASF/Fosroc/IWL/ STP Ltd)

M&L for 40mm thick PCC type E2 1:5:10(40mm aggregate) in sunken floor of toilet/bathroom finished fair and even without using extra cement.

Supply only integral water proofing compound complete all as specified and as directed.

M&L provide 50 mm dia UPVC pipe of pressure rate 10kgf/cm2 as water spout in sunken floor complete all as specified and directed.(Make:Prince/Supreme/Finolex).

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm bt n exe 20cm girth complete all as specified and as directed..

M & L for cutting out cracks to 'V' section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed.

Treating cruble joints bt racking out the joints ,cleaning the joints off oose materials old filler board sealants etc completely & providing &inserting preformed expandable synthetic filler board of make supreme or any other approved make to the full depth of the joints after leaving 15mm from the outer face of the members (column,beam etc)& filling the outer 15mm with polyurethane/polysulphyde joints sealants of approved make for full width of joints & fixing aluminium sheet of 1mm thick & 150 mm wide over the crumble joint using 40mm brass screw with washer complete all as specified and as directed. Note: Width of filler board shall be equal to the width of joint.

M&L for Rolled sections Z Sections as fixed with angle cleats or other connecting plates for supporting roof coverings complete all as specified and as directed.

S&F prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.

Dismantling fencing wire mesh any type including cutting bushes, srubs from existing wire to facilate dismantling, and depositing where directed at a level exc. 150m nexc. 1.50 m above the starting point complete all as specified and as directed.

Dismantling post or struts embeded in congrete (steel,RCC ) any type section,including taking out embeded portion and making good disturbed ground and depositing where directed at a level exc. 150m nexc. 1.50 m above the starting point complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc and getting out soft/loose soil complete all as specified and as directed.

M&L Cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and as directed.

Removal of excavated material to a distance exc 250 m and n exc 500m as complete all as specified and as directed.

S&F PVC coated chain link fencing (mesh 50 mm X 50 mm size) nominal dia of wire 3 mm ( including pvc coating ) fixed to fencing posts using suitable bolts and nuts complete all as specified (nuts and bolts shall be measured separately)

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of anti corrosive synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying 2 coat of acrylic distemper over one coat of acrylic primer over and including 1.5 mm thick wall care putty complete as directed (make : Asian - Tractor Acrylic/ Berger-Bison/ Dulex- supersmooth)

S & F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with PTMT Urinal spreader, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed .

Excavating in post holes in soft/loose soil (or similar holes) each n.exc 0.5 cum, getting out ramming , filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 Cm complete all as specified and as directed.

Mirror polishing on marble/ granite/Kota stone/ stone work to give high gloss finish complete all as specified and directed.

M&L for application of one coat of antirust chemical Nigrozinc primer manufactured by M/s Fosroc to exposed reinforcement on ceiling complete all as directed by manufacturer. (Note : Surface if any exposed during taking down of plastering under item No 1 shall be executed under this item.

Supply and fixing in repair 6 feet (4 pipe set) Pulley operated cloth drying system consisting of Aluminium pipe of outer dia 22 mm, pulleys made up of delrin with rope guide mounted on channel pair of length 24“ (distance between two pipes is adjustable) Locking system to hide rope knot, channel to be mounted or fixed with self tapping screws provided in KIT, Rope will be HDPE double core of 4mm dia, Fixed to ceiling, minimum weight of one pipe shall not be less than 0.20 kg/m minimum weight of rope shall not be less than 550 gms / unit (for 4 pipes) with all accessories and making good the disturbed surface if any while fixing complete all as specified and directed. Make: Easy Dry or equivalent make as approved by GE)

M&L 30mm thick IInd class hardwood glazed and skeleton shutters , open rebated and prepared to receive glass gauge etc, edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutter as specified in SSR (Part-I)- 2009 complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sheet metal encl. with plug & socket etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed..

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLS multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic ( ISI marked ) fixed concealed on wall /roof except beam, column and RCC roof including chases cutting incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire with GI flush box of suitable size with inner and outer white cover plate and frame for One light point controlled by one switch complete all as specified and directed.

All as per item No. 109 above but for One fan point / exhaust fan point controlled by one switch & regulator

All as per item No. 109 above but for One 5 pin 5 Amps Socket point controlled by one switch on same board.

All as per item No. 109 above but for One 5 pin 5 Amps socket point controlled by one switch on independent board.

All as per item No 109 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board complete all as specified and directed..

All as per item No109 above but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure complete all as specified and directed.

S & F modular switch 1 way 6 Amps,1 module complete all as specified and directed.

S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.

S & F Modular socket 6 Amps and 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular socket 6 A/16 A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Modualar type switch 15 A One way SP complete all as specified and directed.

Taking down existing Light fittings of any type and size and removing to store yard complete all as specified and directed.

S&F Tubelight fitting 1 x 20 w ,with T 8 LED tube with aluminium Extrusion heat sink for optimum performance with Luminarie Efficiency 120 Lum/Watt and batten pre wired suitable for use with LED tube with concealed accessories complete all as specified and directed. Make:REGALBATTENT8UPTO1X22WSSBSWH & LED rod CRYSTAL1213T8DSTL20WLED865SGLASS/CG/WIPRO or equivalent make mentioned in ist of manufactures

Supply and fixing building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 60 Watt, not less than 120 Lumen/Watt including taking down of existing light fitting of any type and make complete all as specified and directed . Crompton Cat Part No. Crompton Cat Part No. LSTP-60-CDL-M or equivalent make from list of makes including suitable GI bracket of 25 mm dia and fixing arrangement on walls .

S&F of Led Recessed mounted 600*600 mm Luminaire having power consumption not more than 30W and light output not less than 3600 Lumens with System efficacy> 120 Lumen/Watt . Housing Shall be made up from single piece CRCA body without welding to avoid rusting and Polystyrene diffuser to reduce glare. The Luminaire should be having minimum 50000 Burning hours(L70B50) with CRI ≥80, SDCM<5,and Co-related color temperature (CCT) of 6500K.The luminaire shall be flicker free with a ripple content less than 5 % .The luminaire must have 4KV surge protection integrated in driver, PF≥0.95, Total harmonic distortion THD≤10% and Operating voltage range 140-270V with High voltage cutoff@325 ± 15V with Auto restart feature. Luminaire and driver shall be separately BIS approved of same make equivalent to Philips RC380B LED36S-6500 G6 L60W60 PSU OD or Techno- Commercially equivalent make mentioned in ist of manufactures

Supply & fix ceiling fans (BLDC) complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete including taking down all as specified.Make CG Cat Part Energion HS BLDC equivalent make mentioned in ist of manufactures

Supply & fix heavy duty exhaust fans AC single phase 230/ 240 V of size 600 mm sweep, 900 rpm complete including taking down all as specified Make Turbo force SP of Havells or equivalent make from list of makes. Note:- Old exhaust fans will be deposited in MES store yard

Supply & fix heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep, 900 rpm complete including taking down all as specified Make Turbo jet SP of Havells or equivalent make mentioned in ist of manufactures Note:- Old exhaust fans will be deposited in MES store yard

Taking down unserviceable ceiling fan of 1200mm/1400mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No complete all as specified.

Taking down unserviceable exhaust fan of 300mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No complete all as specified.

Taking down unserviceable heavy duty exhaust fans AC single phase 230/ 240 V of size 600 mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No complete all as specified.

S&F fan regulator electronic step type, modular type, 120 W, 2 module complete all as specified and as directed.

M&L Earth continuty or main earthing lead fixed to wall on betten / recess / chases / burried in ground including drawn in conduit/pipe / fixed to poles / any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron Strip complete all as specified.

S&F Sheet metal enclosures with socket plug top and MCB' single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB complete all as specified and as directed.

Taking down old DBs with MCCB/MCBs of any size complete all as specified and as directed.

S&F Sheet metal enclosure Vertical TPN for DB's when MCCB's to be used 8 way with 250 amps bus bar double door IP 43 complete all as specified and as directed.Make Havells cat No DHDLVDRWGOFO08 or equivalent make mentioned in ist of manufactures

S&F Sheet metal enclosure TPN for DB's when MCB's to be used 8 way with 200 amps bus bar double door IP 43 glazed door complete all as specified and as directed.Make Havells cat No DHDMTVOSRW08 or equivalent make mentioned in ist of manufactures

S&F Sheet metal enclosure TPN for DB's when MCB's to be used 4 way with 200 amps bus bar double door IP 43 glazed door complete all as specified and as directed.Make Havells cat No DHDMTVOSRW04 or equivalent make mentioned in ist of manufactures

S&F SPN sheet metal enclosure for DB 8 ways Double door complete all as specified and as directed.

S&F SPN sheet metal enclosure for DB 4 ways Double door complete all as specified and as directed.

S&F MCCB 4 pole, 415 Volt fixed type 160 Amps with breaking capacity 16 KA complete all as specified and directed.

S&F MCB 'B' Curve 63 Amp 4 pole, 415 Volts, all as specified and directed. Make Havells Cat Part No. DHMGCTPF063 or equivalent make mentioned in ist of manufactures

S&F MCB B' Curve 6-32 Amp SPN ,240 Volts all as specified and directed.Make Havells Cat Part No. DHMGCSNF006-032 or equivalent make mentioned in ist of manufactures

S&F MCB 'B' curve SP 6 to 32A,240volts all as specified and as directed. Nake : Havells cat part No. DHMGBSPF006-32 or equivalent make mentioned in list of manufactures

Taking down old sub main wiring of any size complete all as specified and as directed.

M/L submain wiring with 2 single core 4 Sqmm PVC insulated unsheathed multistranded FRLS copper conductor cable 1100 volt grade drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and one run of 4 Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity conductor and connceting with suitable size thimble complete all as specified and as directed. Note: Two run of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

All as per item No 144 but 2 single core 6 Sqmm cable with 6 Sqmm earth wire complete all as specified and as directed. Note: Two run of 6 sqmm size PVC cable , one run of 6 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

All as per item No 144 but 2 single core 10 Sqmm cable with 10 Sqmm earth wire complete all as specified and as directed. Note: Two run of 10 sqmm size PVC cable , one run of 10 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

M&L for sub main wiring with 4 runs of 16 Sqmm (FRLSH) PVC insulated unsheathed multistranded copper conductor cable and 1 run of 16 Sqmm (FRLSH) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good distrubed surface to match with existing surface . Note . 4 runs of 16 Sqmm sub main wire and one run of 16 sq mm cable for earthing and one run of PVC conduit shall be measured as one unit.

M&L for sub main wiring with 4 runs of 10 Sqmm (FRLSH) PVC insulated unsheathed multistranded copper conductor cable and 1 run of 10 Sqmm (FRLSH) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good distrubed surface to match with existing surface . Note -1. 4 runs of 10 Sqmm sub main wire and one run of 10 sq mm for earthing and one run of PVC conduit shall be measured as one unit.

Taking down old earthing complete all as specified and as directed.

S&F Sheet metal enclosure insulated Plug & Socket With TPN MCB 32 amps, 3P+N+E complete including taking down old one all as specified and as directed.Make Havells cat No DHDPBTN032 or equivalent make mentioned in list of manufactures

Material and labour earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounted from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electorde connected by using GI wire 4 mm dia (max -length of 7.5 mtrs )by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as prrotection pipe for GI wire connected main controll board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel,wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion .

Supply & fixing, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches / ducts/Wall of size 3.5 core 50 Sqmm all as specified and directed :

S&F On Load change over switch as open execution 160A,415v,AC 63 A,4P & Type CO2-160 Cat Ref No CO21600OOOO of M/s L&T or equivalent make mentioned in list of manufactures as in replacement/repairs complete all as specified and directed

Taking down old GI/ CPVC pipe of size 40 mm complete all as specified and as directed.

Taking down old GI/ CPVC pipe of size 25 mm complete all as specified and as directed.

Taking down old GI/ CPVC pipe of size 20 mm complete all as specified and as directed.

Supply and fix in repair on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia complete all as specified and directed.

Supply and fix in repair on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 25 mm dia complete all as specified and directed. Make: Supreme/Eurotech/Astral/SFMC

Supply and fix in repair on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 20 mm dia complete all as specified and directed. Make: Supreme/Eurotech/Astral/SFMC

Taking down old bib tap, stop cock,shower ,pillar tap,sink cock,angle valve, health faucet, Self closers Pressmatic & angle cock etc complete all as specified and as directed.

Supply and fixing of Bip cock , CP quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge.(Make : Model No F2008151 of Cera or equivalent make mentioned in list of manufactures )

Supply and fixing of Bip cock, CP quarter turn with flange and areator, fancy type long nose with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge.(Make : Model No F2008152 of Cera or equivalent make mentioned in list of manufactures )

Supply and fixing of CP Bip cock short body with flange and nozzle for garden/wahing machine of size 15 mm including necessary fixing accessories with GI/CPVC pipes complete all as specified and as directed by the Engineer-in-charge.(Make: CERA : Model No F2002153 or equivalent make mentioned in list of manufactures )

Supply and fix concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and as directedby the Engineer-in-charge.(Make : Model NO: F2002362 of Cera or equivalent make mentioned in list of manufactures )

Supply and fixing 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for for CPVC pipe complete specified and as directed by the Engineer-in-charge.(Make : Model No: F2008201 of Cera or equivalent make mentioned in list of manufactures ))

Taking down old PVC connection complete all as specified and as directed.

Supply and fixing PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe complete all as specified and directed.

Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , including taking out old one all as per specified and directed (Make : Model No: F8030105AB of Cera or equivalent make mentioned in list of manufactures )).

Supply and fixing in pillar taps, swan neck spout with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe,complete all as specified and directed by the Engineer-in-charge.(Make : Cera Model No:F2008104 or equivalent make from list of manufactures.)

Supply and fixing in pillar taps, spout with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe,complete all as specified and directed .(Make : Model No: F2008101 of Cera or equivalent make mentioned in list of manufactures )).

Supply and Fixing of Kitchen sink cock quarter turn wall mounted with long swivel spout not less than 150 mm and wall flange complete all as specified and as directed .Model No: F2008251 of CERA or equivalent make mentioned in list of manufactures )

Supply and fixing of swivel overhead shower of PTMT any colour with shower arm 15 mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe and taking down old one complete and all as specified and as directed . Cat Part No. F7010212AB of Cera or equivalent make mentioned in list of manufactures )

M/L for cutting chasses on walls floor etc not exceeding 20 cm girth and making good the disturbed surface to match with the existing after removing the existing concealed pipe/laying new pipe, complete all as specified and directed .

Taking down old CPVC ball valve of size 20 mm /25 mm/40mm complete all as specified and directed.

S& F CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

M & L for CPVC Ball Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

M & L for CPVC Ball Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

S/F float valve synthetic(PVC) of size 40 mm dia high pressure with polythene ball of size 6" dia and flynut complete all as specified and directed.

Supply and Fixing CP angle cock,Self closers Pressmatic with wall flange and 200 mm connecting pipe for urinal pots to fixed in 15/20 mm Pipe,complete all as specified (Make : Cera Model No: F9020203 or or equivalent make mentioned in list of manufactures )).

Taking down old float valve synthetic(PVC) of size 40 mm complete all as specified and directed.