Civil Work

Name of Work : Design, Supply, Construct, Erection and Commissioning of Modular Structure through 3D

Monolithic Precast Technology for AWC (Anganwadi Center) at Various Locations at Vadodara,Bharuch, Dang,

Navsari, Valsad Districts in the Gujarat State. Phase-2, Package-2

BILL OF QUANTITIES

Item No. Item Description Quantities Unit Amount

Excavation for foundation for depth from up to

3.0 m including sorting out and stacking of

1 useful materials and disposing off the 14099.17 Cum 291.36

excavated stuff upto 50 Meter lead.(B) Dense

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- Coarse sand : 6- graded stone aggregates

20 mm nominal size) and curing complete including

cost of formwork in PCC.

Fabrication and manufacturing of solid precast

concrete element with provisions of shear keys,

connecting loops, dowel tubes and proper lifting

accessories for walls, beams, slabs, stairs, column etc,

of various thickness, shape and size of different

concrete grades manufactured in controlled factory

environment with approved methodology including

moulds (Pallet system, Tilts form, table moulds,

battery moulds, vertical moulds, beam moulds,

column moulds, staircase moulds, Facade mould,

etc.), mixing, transporting and placing of concrete,

vibrating, curing, finishing, making necessary

cutout/holes of required sizes for services, yard

3 handling & stacking all complete as per IS 11447:1985 1994.39 Cum 11434.44

and as per approved shop drawings and design mix as

per the direction of Engineer-in-Charge (Cost of

reinforcement, Mechanical, Electrical and Plumbing

inserts will be paid separately).Transportation of

Precast Elements by flat bed Trailor (Double / Triple

axle 40ft Length with proper accessories like A frame

etc) from factory, including the cost of loading

unloading & stacking at site with the help of required

capacity cranes.( All lead & Lift ) & using Concrete

grade M-35 (Cement content 370 kgs) For Columns

Fabrication and manufacturing of solid precast

concrete element with provisions of shear keys,

connecting loops, dowel tubes and proper lifting

accessories for walls, beams, slabs, stairs, column etc,

of various thickness, shape and size of different

concrete grades manufactured in controlled factory

environment with approved methodology including

moulds (Pallet system, Tilts form, table moulds,

battery moulds, vertical moulds, beam moulds,

column moulds, staircase moulds, Facade mould,

etc.), mixing, transporting and placing of concrete,

vibrating, curing, finishing, making necessary

cutout/holes of required sizes for services, yard

4 handling & stacking all complete as per IS 11447:1985 1778.30 Cum 11434.44

and as per approved shop drawings and design mix as

per the direction of Engineer-in-Charge (Cost of

reinforcement, Mechanical, Electrical and Plumbing

inserts will be paid separately).Transportation of

Precast Elements by flat bed Trailor (Double / Triple

axle 40ft Length with proper accessories like A frame

etc) from factory, including the cost of loading

unloading & stacking at site with the help of required

capacity cranes.( All lead & Lift ) & using Concrete

grade M-35 (Cement content 370 kgs) For Beams

Applying general insecticide pest control treatment to

floors, cupboards etc including labour material etc.

complete. Using Imidacloprid 30.5Sc As Per IS

part‐ II (0.075% cocentration by mass) is

recommended 10.5ml chemical dillute with 5 liter of

water appication 0.5 Litre chemical / Sqm of surface is

recommended as per I.S.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

6 not exceeding 20 cm. in depth consolidating each 14099.17 Cum 135.04

disposited layer by ramming and watering.

Filling in plinth with coarse sand under floors

including watering, ramming, consolidating and

dressing etc complete as directed by Engineer in

Fabrication and manufacturing of solid precast

concrete element with provisions of shear keys,

connecting loops, dowel tubes and proper lifting

accessories for walls, beams, slabs, stairs, column etc,

of various thickness, shape and size of different

concrete grades manufactured in controlled factory

environment with approved methodology including

moulds (Pallet system, Tilts form, table moulds,

battery moulds, vertical moulds, beam moulds,

column moulds, staircase moulds, Facade mould,

etc.), mixing, transporting and placing of concrete,

vibrating, curing, finishing, making necessary

cutout/holes of required sizes for services, yard

8 handling & stacking all complete as per IS 11447:1985 3835.76 Cum 12523.73

and as per approved shop drawings and design mix as

per the direction of Engineer-in-Charge (Cost of

reinforcement, Mechanical, Electrical and Plumbing

inserts will be paid separately).Transportation of

Precast Elements by flat bed Trailor (Double / Triple

axle 40ft Length with proper accessories like A frame

etc) from factory, including the cost of loading

unloading & stacking at site with the help of required

capacity cranes.( All lead & Lift ) & using Concrete

grade M-40(Cement content 400 kgs) For Fins Wall

Fabrication and manufacturing of solid precast

concrete element with provisions of shear keys,

connecting loops, dowel tubes and proper lifting

accessories for walls, beams, slabs, stairs, column etc,

of various thickness, shape and size of different

concrete grades manufactured in controlled factory

environment with approved methodology including

moulds (Pallet system, Tilts form, table moulds,

battery moulds, vertical moulds, beam moulds,

column moulds, staircase moulds, Facade mould,

etc.), mixing, transporting and placing of concrete,

vibrating, curing, finishing, making necessary

cutout/holes of required sizes for services, yard

9 handling & stacking all complete as per IS 11447:1985 2495.12 Cum 12523.73

and as per approved shop drawings and design mix as

per the direction of Engineer-in-Charge (Cost of

reinforcement, Mechanical, Electrical and Plumbing

inserts will be paid separately).Transportation of

Precast Elements by flat bed Trailor (Double / Triple

axle 40ft Length with proper accessories like A frame

etc) from factory, including the cost of loading

unloading & stacking at site with the help of required

capacity cranes.( All lead & Lift ) & using Concrete

grade M-40(Cement content 400 kgs) For Slab

Providing TMT Bar FE 550D reinforcement for R.C.C.

work including bending, binding and placing in

position complete upto floor two level.

Fabrication and manufacturing of solid precast

concrete element with provisions of shear keys,

connecting loops, dowel tubes and proper lifting

accessories for walls, beams, slabs, stairs, column etc,

of various thickness, shape and size of different

concrete grades manufactured in controlled factory

environment with approved methodology including

moulds (Pallet system, Tilts form, table moulds,

battery moulds, vertical moulds, beam moulds,

column moulds, staircase moulds, Facade mould,

etc.), mixing, transporting and placing of concrete,

vibrating, curing, finishing, making necessary

cutout/holes of required sizes for services, yard

11 handling & stacking all complete as per IS 11447:1985 36.29 Cum 11513.73

and as per approved shop drawings and design mix as

per the direction of Engineer-in-Charge (Cost of

reinforcement, Mechanical, Electrical and Plumbing

inserts will be paid separately).Transportation of

Precast Elements by flat bed Trailor (Double / Triple

axle 40ft Length with proper accessories like A frame

etc) from factory, including the cost of loading

unloading & stacking at site with the help of required

capacity cranes.( All lead & Lift ) & using Concrete

grade M-40(Cement content 400 kgs) For Chajja

Masonary work using Aerated light weight concrete

block having crushing strength not less than

kg/sqcm for super structure above plinth level upto

floor two level in Ready Mix mortar grout peast

having thickness 3 to 5 mm etc complete as per

Technical Specification

Providing 20 mm thick double coat mala cement

plaster on interior brick / concrete work for plastering

comprising of base coat of 12 mm thick cement

plaster in cement mmortar ( 1 Cement : 3 Coarse

13 sand) in rough finishing and 8 mm thick top coat of 8688.16 Sqm 306.15

cement mortar 1:2 ( 1 Cement : 2 Coarse sand )

finished with trovel including scaffolding, curing etc

complete as directed by Engineer incharge.

Providing and Placing anchor MS bar having dia

16mm including gusset plat of size 150 X 150 X

14 10mm thick including, cutting,welding, grinding, 8400.00 Nos 505.00

grouting etc completed as per drawing & directed by

engineer incharge.

Providing and applying the elastomeric joint sealant

two component, high performance polysulfide

formulation conforming to BS:4254 and ASTM C

having weathering resistance to ultra-violet rays and

15 shall exhibit shore A hardness of 25 and have 10634.40 Rmt 257.66

movement accommodation factor 25% including

using of compatible primer of approved standard etc.

complete. For 20 mm thick join

Providing and fixing side hunge Double shutter door

including using I.T wood frame having size 15 x

cm, shutter frame of indian teakwood of 38 mm thick

and pannel of both side prelaminated particle board

19 mm thick of natural wood grain shade with fixing

of 2 x 3 cm T.W. moulding on both side, fixing of

mm thick tranparent glass in top ventilator and both

side fix in IT wood frame as per detail drawing

including three coat of oil paint with priming coat etc

complete as per instruction of Engineer in charge &

Providing and fixing side hunge Single shutter Door

including using I.T wood frame having size 13x7.5

cm,shutter frame of indian teakwood of 38 mm thick

and pannel of both side prelaminated particle board

19 mm thick of natural wood grain shed with fixing of

2x3 cm T.W. moulding on both side, as per detail

drawing including three coat of oil paint with primer

etc complete as per instruction of Engineer in charge

& approved make.

Providing and fixing FRP frame size 100x50 mm and

28mm thick FRP depress panel shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with

injected fire retardant grade polyurethene foam done

in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole

FRP frame & shutter is to be water proof weather

proof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with necessary

screws & alluminium fixtures & fastenings & fastener

sleeve.. Door - D3

Providing and fixing window having extruded

aluminum Colour Powder Coated section frame main

outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /

Rmt, horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x 1.30 mm @

wt.of 0.0.659 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm @

wt.of 0.456Kg/mt, vertical member of size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt with 5 mm

thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window-W

Providing and fixing Ventilation of standard extruded

anodised Alluminium section of size 65 X 25 X

mm of section no 14031@ Wt 0.59 kg/Rmt with

colour anodized alluminium fame with 3 mm thick

20 Bajari figured glass with adjustable louvers of 181.44 Sqm 2279.85

standard (I.S) make as per detail given in elevation etc

complete as per instruction of Engineer in charge &

Providing and fixing MS safety grills of required

pattern for Windows, Door using 16mm dia MS

polished bars at 10 Cm C/C spacing inserted and

welded from inside to rectangular box type frame

21 CRC Pipes of required Size at required spacing as per 52676.40 Kg 131.42

design and hold fasting with coach bolts including

one coat of red oxide primer and two coats of oil

painting etc complete.

Providing and fixing 60 x 60 Cm Granite Vitrified Tiles

(GVT) Colour/ Wooden Shed 10 mm thick vitrified

tiles flooring over 20 mm average base of cement

mortar 1:6 (1 Cement : 6 Sand) with groove and filled

the same with grout material of approved quality

including finishing cleaning the surface etc. as

directed by Engineer in charge.

Providing and laying Black or Colour Machine Cut free

edges, Machine polished Granite Stone slab 18 mm

thick single piece For Stair, Step, Landing, Skirting etc

as per design including fully moulded round front

edge and 1cm nosing and necessary groove on trade

23 of steps laid on 20 mm thick cement mortar 1:6 (1- 3391.08 Sqm 2947.59

cement : 6 coarse sand) jointed with grey cement

slurry including rubbing, polishing & Finishing etc

complete as directed by Enginner in Charge.

Providing and Laying Machine cut, Machine polished

7.5 cm wide Blue Granite strip flooring laid on 20 mm

thick cement mortar 1:6 (1 Cement :6 Sand) on Ramp

for basement with length of Granite strip minimum

2.50 Mt, jointed with grey cement slurry with

pigment including rubbing polising, finishing etc

complete as directed by Engineer in charge.

Provding & Laying Granito vitrified tiles 60 X 60 Cm

(GVT) Matt finshed tiles in flooring treads of steps

and landing laid over 20 mm (average) thick base of

25 cement mortar 1:6 (1-Cement : 6 Coarse sand ) laid 997.92 Sqm 1619.65

over and jointed with white cement slurry including

finishing with flush pointing and cleaning the surface

Providing and laying coloured glazed tiles Matt

finish of the size 300 mm x 300 mm x 8 mm in

skirting, risers of steps and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry. ( Flooring in WC)

Providing and laying coloured glazed tiles of the

size 300 mm x 600 mm x 8 mm in skirting, risers of

steps and dedo on 10 mm. thick cement plaster 1:3

(1 cement : 3 coarse sand) & jointed with white

cement slurry. ( Dedo in WC)

Providing and fixing pre-cast Rubber Dye inter locking

concrete block 60mm thick with grade of concrete

M300 pnumatic compresed by mechanically pressed

and as per approved design including 75mm Sand

layer for levelling and filling the joint with sand in

proper line and level etc complete as directed by

Engineer in charge.

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials including Cement washing with

29 portland cement slurry of one coat on wall surface to 38947.76 Sqm 125.85

give a smooth finish including thoroughly broomings

the surface to remove all dirt, mortar drops and other

foreign Brand etc complete as directed by Engineer

Wall painting (two coats) with plastic emulsion paint

of approved brand and manufacture on undecorated

wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and

30 other foreign matter and sand papered smooth 32489.10 Sqm 125.10

including Applying two coats of acrylic laphy (putty) &

two coats of primer of approved brand etc complete

as directed by Engineer incharge.

Providing and laying broken china mosaic flooring

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain

or slope and to be tempered to bring mortar creme

out upto surface using white cement including

rounding off junctions and extending them upto

15 cm along the wall,clearing with water and oxalic

acid etc. as directed by Engineer in charged.

Providing & Fixing stainless steel Kitchen sink Glossy

ASIS 304 Grade and 1 mm thick with with over all size

510mm X 432mm X 330mm deep having bowl size

445 mm X 368mm X 190mm with all fitting C I Or M.S

Brackets painted white or fixing on stone base

32 including cutting holes and making good the same 168.00 No 2682.13

brass waste and M I fisher union fitting including all

necessary fitting etc complete as per instruction of

Enginer in charge & approved make.

Provision and fixing water child Friendly toilet pan

having size 500x275x580 mm specially for children as

per WASH guideline W.C. Pan with integral P or S trap

including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover

to be measured and paid for separately)(A) vitreous

China Pattern :(i) in white colour

Providing and fixing washbasin with single hole for

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

incluiding Providing and fixing C.P.32 mm dia brass

waste pipe, M.I 32 mm dia fisher union,with

Necessary Couplings (ii) Flat Back washbasin 550 mm

x 400mm size. (1) in colour (Hindustan, Cera,

Parryware ) including all Necessary Pacca fitting

etc.complete as directed by Engineer incharge.

Providing & Fixing PVC SWR Nanhi trap IS 14735 for

drain 75mm with jali of the following nominal

35 diameter of self cleansing design with C.I. Screwed 672.00 Nos 581.47

down or hinged gratting including cost of cutting and

making good the walls.

Providing & Fixing S.W. Gully trap with C.I. Greating

brick masonay chamber and water tight C..I Cover

with frame of 300 mm X 300 mm Size ( Indian ) with

standard weight (i) Square mouth traps (C) 150 mm

x100 mm size P or R Type.

Constructing Brick masonary chamber for

underground C.I. Inspection chamber and bends with

bricks having crushing strenght not less than 35kg/

cm2 in C.M. 1:5 C.I. Cover with frame ( light duty)

455mm x 610mm internal dimention total weight of

cover with frame to be not less than 38Kgs (weight of

cover 23kg and weight of frame 15Kg). R.C.C. tpp slab

37 with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone 336.00 Nos 2932.93

aggregate 10mm nominal size) foundation concrete

1:5:10 inside plaster 1:3 finished smooth with a

floting cost of neat cement on walls and bed concrete

etc. comp. (i) inside dimension 455mm x 610mm &

450mm deep for single pipe

Providing laying and jointing in true line and level

UPVC SWR pipe Type B pipe confirming to IS 13592 -

1992 with one end plain and other end socketed with

rubbering & fitting confirming to ISI 14735-1999 of

approved make for drainage system pipe line,pipe

shall be jointed with each other with rubber

lubricant,pipe shall be fixed on wall using of PVC

38 clamp of the size 160mm diameter x 210mm lenght x 1680.00 Rmt 760.26

196mm high at every 2000mm center to center or

shall be concealed in wall as directed including

necessary fitting such as bends,shoes etc. including

testing of pipe and joints and jointed with adhesive

solvent cement including cost of all materials. (i)

Providing laying and jointing in true line and level

UPVC SWR pipe Type B pipe confirming to IS 13592 -

1992 with one end plain and other end socketed with

rubbering & fitting confirming to ISI 14735-1999 of

approved make for drainage system pipe line,pipe

shall be jointed with each other with rubber

lubricant,pipe shall be fixed on wall using of PVC

39 clamp of the size 160mm diameter x 210mm lenght x 2520.00 Rmt 874.96

196mm high at every 2000mm center to center or

shall be concealed in wall as directed including

necessary fitting such as bends,shoes etc. including

testing of pipe and joints and jointed with adhesive

solvent cement including cost of all materials.(ii)

Providing & Fixing G.I. Z Type heavy duty clamps

with G.I. 6 mm dia. ring for sutiable dia of pipe for

Rain Water, Drainage, Water Supply line including

drilling holes, fixing of pipe, nuts, bolts, washers with

all lead & lift etc complete as directd by Engineer in

Providing and fixing in position UPVC cowel went to

pipes. (C) 110mm dia.

Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

42 at every two metre C/C or shall be concealed as 3360.00 Rmt 148.12

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing and laying in true line and level U.P.V.C (Sch-

40) including fitting as approved by Engineer in

charge. Pipe shall be fixed on the wall with held of

clamp at every two meter c/c shall be concealed or

43 open as directed including necessary fitting etc. 1680.00 Rmt 91.84

including testing of pipe and joints and fixing the

same with adhesive solvent including cost of all

materials. (ii) 25mm dia.

Providing and laying in true line and level U.P.V.C (Sch-

40) including fitting of as approved by Engineer in

charge. Pipe shall be fixed on the wall with held of

clamp at every two meter c/c shall be concealed or

44 open as directed including necessary fitting etc. 1680.00 Rmt 72.65

including testing of pipe and joints and fixing the

same with adhesive solvent including cost of all

materials. (i) 15mm dia.

Providing and fixing screw down Half turn bib taps of

45 following size.(A) Brass screw down bib tap polished 504.00 Nos 186.83

bright. (i) 15mm dia.

Providing & Fixing Double soap dish of SS 304 Grade

of approve quality including fixing with nut bolt

washers etc completed as directed by Engineer

Providing and fixing toilet paper holder.(A) C.P. Brass

Providng and fixing 600mm x 450mm bevelled edge

mirror of superior glass mounted on 6mm thick A.C.

sheet or plywood plug with C.P. brass screw and

Providing erecting and fixing Double coated heavy

duty Syntex PVC. (ISI) water tank of required

49 capacity each with all necessary fittings and 168000.00 Litr 4.45

connection etc. complete on terrace.

Providing and fixing ball cock of approved quality as

50 directed (A) Copper metal (i) 25mm dia. 168.00 No 132.87

Providing and fixing in position 300 to 150mm wide

English / Gujarati letters made from 1.0mm thick

51 stainless steel sheet as directed by Engineer in charge 3360.00 Nos 707.00

with all material, hardware, accessories and fitting etc

SIGNAGES ON WALL

Providing, Fabricating & Fixing wall signage's

using 304 grade Stainless steel brushed steel finish

plate of 1.5 mm thick fixed on a wall using s.s studs

including punched (laser cut) lettering carried out on

S.S. plate of required size and text as directed by

Engineer over the S.S plate etc complete.

Providing and Placing Pre-cast under ground water

tank having inside dimension 3000 lit of control

cement concrete M-400 including using

rainforcement about 60 Kg/cmt in bottom, Vertical

wall, slab having thickness 15 Cm including

Excavating, PCC 1:2:4, MH Cover fixing of all

inlet/outlet pipes etc complete as directed by

engineer incharge.

Providing and Fixing ABC Type DCP Extinguishers 5 Kg

( MAKE-KANEX, ATASEE, SAFEX )etc complete as

directed by engineer incharge.

Providing and Fixing 2 Kg CO2 Capacity ( MAKE-

55 KANEX, ATASEE, SAFEX )etc complete as directed by 168.00 No 5050.00

engineer incharge.

Providing and Fixing SS 304 Foldable Checking bed

having size 1.50 X 0.60 X 0.75 mm including using of

25mm dia pipe, SS 2mm thick, matter of 25.4 (1") of

40 density, cover with regine cloth of approved

quality etc completed as directed by Engineer

Providing and Placing IT wood writing table having

size 1.50 X 0.75 X 0.75 mt with one side drawer with

using of 19mm thick WP wood, top cover with 1 mm

57 thick wood type Formica including using of all 168.00 No 15150.00

necessary material & labour etc completed as

directed by Engineer incharge

Providing and fixing Fabric cloth Curtain having length

1.8 mtr for covering of checking area including using

of alluminum sliding channel etc complete as directed

by Engineer incharge.

Providing and Fixing of SS 304 Hanger for bag

including using all necessary materials like SS rail,

screw etc completed as directed by Engineer Incharge.

Providing and Fixing pin cushion display board having

size 1.20 X 0.75 mt including using of alluminum

60 section frame, 18mm thick WB plywood, nevy blue 168.00 No 606.00

Cushion cloth pin etc completed as directed by

Engineer Incharge.

Providing and placing Godrej type CRC sheet

cupboard having size 1.20 X 0.45 X 2.10 mt including

using of 1mm CRC sheet, including 5 row drawer,

Safety chest box with locking arrangement, SS 15cm

long with handle etc apply one coat of primer and teo

coat of oil paint etc completed as directed by

Engineer Incharge.

Providing and placing room flooring fabric type carpet

of 5mm thick including stiching of edge with

embrodery fiber net etc completed as directed by

Engineer incharge.

Providing and Fixing Modular type furnture for

kitchen cup board, shutter drawer, using SS grill, SS

sliding roller, SS Handle, Magnet including using of all

necessary articles materials like SS rail, screw, nu,

nolts etc completed as directed by Engineer incharge.

Providing and Fixing Modular type wall mounted cup

board with 45cm deep & 90cm high including using of

12mm thick plywood with both side laminated

64 surface with drawer as per detail, SS handle, SS 204.12 Sqm 9090.00

lock,Stopper, magnet etc completed as directed by

Engineer incharge.

Providing and fixing modular type wall panneling as

per detail drawer with using of 12mm thick

waterproof plywood, including using all necessary

materials like SS rail, SS screw, nut,bolts etc

completed as directed by Engineer Incharge.

Providing and fixing foldable MS ladder having 0.90mt

wide & 3.60mt long including rod hinge arrangment

at middle with ladder including one coat of red oxide

& two coats of oil paint etc completed as directed by

Engineer incharge.

Providing and fixing of hook of 10mm or 12mm dia

including drilling hole, fixing of male- female thrade

67 fastner sealing the same with appoxy compound, 168.00 No 303.00

finishing the same etc complete as directed by

Engineer incharge.

Providing and fixing medical device & equipment

standio meter height measuring scale 2.10mt long

68 including fixing in wall with using of all heavy SS 168.00 No 1414.00

screw, rail etc complete as directed by Engineer

Providing and fixing Pre writing board having size

30cm X 20cm with decorative acralic border etc

completed as directed by Engineer incharge.

Providing and supplying standard PVC (Polyvinyl

chloride) Chair with handle of approved design and

make as directed by Engineer incharge.

Providing and supplying standard PVC (Polyvinyl

chloride) Stool having size 3.75 X 0.60 X 0.45mtr of

approved make as directed by Engineer incharge.

Point wiring for Light /Exhaust/ Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

72 textured/metallic/white front plate modules erected 3864.00 Pt. 530.25

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed

by Engineer In charge.

(9) 16 Amp. SP one way switch

(10) 6/16Amp. Universal socket

(24) Batten Holder/Angle Holder with modular frame

78 with metal ring. 1008.00 Ea. 71.71

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved

manner as directed

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded wire

of green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

(A) With medium class Rigid PVC pipe and accessories

providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 6 sq. mm

Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front

plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

85 LED driver efficiency > 85 % 1344.00 Ea. 439.35

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional

Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable

(iii) 10 to 15 watts

providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to be

87 erected in existing box. confirming to IS 8828/1996 1512.00 Ea. 131.30

Providing & erecting 240 V MCB double pole switch

for lighting Load (B Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity

(A) 6 to 32 Amp.

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs

89 should be used of same company of MCB to be used) 168.00 Nos. 1982.63

(A) single phase incoming and horizontal single phase

(b) sheet steel double door (IP-43)

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with

all advance feature & do not incorporate any

electronic component. for following Max. rating

erected as directed

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make

OEM has to submit test certificate including value of

earth resistance of installation duly stamped and

91 signed by agency and officer Incharge has to ensure 168.00 Ea. 5416.63

the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:-

ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting HOT deep Galvanised iron strip

wire 8 to 16 SWG.

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting accessories

of same material at required depth in existing trench

for laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

Providing & erecting Approved make Power Saving

Watt Ceiling Fan with double ball bearing ISI mark

with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

94 complete having 3blades with aluminium blades with 672.00 Ea. 2297.75

, canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in

Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S.

round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to

cover the fan hook or Fan box.

Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame.

200mm with 1350RPM Cat.II

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

99 efficacy> 100 lumens/watt . LED driver efficiency > 85 1176.00 Ea. 2596.71

%.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with over-

voltage protection.

(iii) above 24 to 36 watts

Supplying and erecting approved make Segment time

switch suitable for 230V+10%16A. floating contacts

with 24 hour dial having15/30 min. segments with

early manual override switching for on & off without

influencing the program sequence with quartz time

switch With power reserve, housed in fire proof

thermoplastic enclosure & transparent cover terminal

covers erected as required wire necessary connection

erected as directed.

Supplying and erecting Street light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S.

sleeve tubing of approx. 45cms.length and suitable

for 76.5mm/80mm/require size of pole top having

nuts and bolts for fixing the brackets and having

spread of 0.5 mtr. Length with 110 deg.with vertical

plane and suitable welded stiffener reducer and

nipple with check nut complete painted with one

coat.of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of

[A] Single Arm bracket 0.5 Mtr

Providing & erecting approved make street light / wall

mounting junction box compression moulded from

SMC (thermoset plastic) vertical sliding cover having

locking with square head stud loop in / loop out in

built terminal suitable for four core cable, waterproof

of I.P. 54 protected with clamp or bolt nut & earth

bolt of following size.

Providing and erecting water cooler having storage

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @

an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚ C within a hour, The water

cooler should be comprising of hermetically sealed

103 compressor, fan motor, condensing unit, water tank 168.00 Ea. 26260.00

surrounded by evaporating coil, thermostats, relay

etc. complete with necessary inlet & outlet

connection. The body of water cooler will be made

from Stainless Steel. ◦

Supplying & erecting 5 stage single reverse osmosis

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment

filter GAC filter, carbon filter suitable buster DC pump

capacity 80 psi, mention with 40 psi inline type post

carbon filter auto low & high pressure switches with

following size of storage tank & LPH capacity &

erected as directed

[A] 10 Ltr / Hr with 7 Ltr StorageTank

Supplying & erecting approved make self-priming

domestic monoblock water pump with 1 H.P motor,

suitable for operation on 230 volts, 50c/s. AC supply

with metallic flange, and M.S. impeller delivery and

following discharge.

(a) 40 LPM at 24 mtrs. head suitable for 25mm dia.

(A) Total Tendered Amount

(B) Rebate on Tendered Amount (if any) _______% (in Figures)

(C) Net Tendered Amount (A – B)

(* Please strike out whichever is not applicable).

1. All work shall be carried out as per public works Department Handbook and other specifications of Division

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and

4. To be Continued on additional sheets, if found necessary.

5. 1.00 % of Construction cost shall be deducted form Bill. Amount of Contract as per the Building and other

6. Credit of dismantled materials of amount of Rs. 0.00 must be recovered from Contractor's first R.A Bill.

7. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH /

8 The contractor shall exhibit a board as per Government Circular No. Vernacular TNC/1090/24/S dated

9 Testing of material shall be done as per statement attached with specification. The material should be tested

10 In all R.C.C. items in rate analysis, standard cement consumption has been taken as per Govt. GR. PRC- 10/

11 The Contractor is solely responsible to bare all applicable taxes i.e. GST etc. & department will not entertain

Dated Signature of Executive Engineer

the Contractor. Panchayat R & B Division