REPAIRING WORKS OF 15- ANGANWADI AT VARIOUS AREA OF PATAN TALUKA . TA. PATAN, DIST. PATAN.

NAME OF WORK: Repairing Works Of Anganwadi At Various Area Of Patan

Taluka . Ta. Patan, Dist. Patan.

BILL OF QUANTITIES / QUANTITY STATEMENT

It. Item Of Work Quantity Unit Rate Amount

1 Removing and scraping of old deteriorated plaster 335.440 Sq.mt 20.8400

of any thickness fromm wall / R.C.C member

including stacking of serviceable material and

disposal of unserviceable from site of work with

all lead and lift

2 Providing 15mm thick cement plaster in single 911.810 Cum 168.8700

coat on Rough (Similar)side of single or half brick

walls for interior plastering upto floor two level

and finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand)

3 P & L 24" x 24" vitrified 8 mm thick tile flooring 500.420 Sq.mt 1546.8479

over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing

on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

4 Distempeing (Two coats) with oil bound distemper 1876.320 Sq.mt 80.3200

of approved brand and manufacture and of

required shade on wall surfaces to give an even

shade, over and including a priming coat with

distemper primer of approved brand and

manufacture after thoroughly brushing the

surface free from mortar dropping and other

foreign matter and also including preparing the

surface even and sand papered smooth.

5 Finishing wall with weather proof exterior 2349.750 Sq.mt 122.136

emulsion paint on wall surface (two coats) to give

an required shape even shade after thoroughly

brushing the surface to remove all dirt, and

remains of loose powdered materials.etc

6 Providing and fixing 35 mm thick shutters for 23.000 Sq.mt 4102.103

Doors, windows and clear story windows including

anodised alluminium butt hinges with necessary

screws.(A) Indian Teak Wood (1) Fully Panelled

7 Providing and fixing M.S. grills of required pattern 1235.000 Kg 114.440

to wooden frames of windows etc. with M.S. flats

at required spacings and frame alround, square or

round bars with round headed bolts and nuts or

by screws (A) Plain Grill.

8 Providing and laying broken chine mosaic flooring 569.030 Sq.mt 779.694

for terrace using 12 mm to 20 mm broken pieces

of glazed tiles to be laid over cement mortar 1:3

to plain or slope and to be tempered to bring

mortar creme out upto surface using white

cement including rounding off junctions and

extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as

9 Providing and fixing 20cm. x 15cm x 2.5 cm. thick 15.000 Nos. 279.685

year plate of marble stone set in C.M. 1:4

including finishing and engraving letters etc.

10 Dismentaling the existing structure including 5.240 Cum 974.660

removing and stacking the dismentelled materials

as and where directed. (A) R.C.C. work

11 Demolition of Brick work and stone masonry 4.720 Cum 589.698

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

12 Brick work using common burnt clay building 5.270 Cum 4004.120

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional. Above Plint level Upto Floor Two

13 Providing and laying Ordinary cement concrete 5.240 Cum 6555.680

1:1.5:3 (1Cement: 1.5 Coarse Sand : 3 Graded

Stone aggregate 20mm nominal Size)and curing

complete including cost of formwork and

excluding reinforcement for reinforced concrete

work in (B) Slabs, landing, shelves, Balconis Lintels,

Beams, Girders and Cantilever upto floor two

14 Providing TMT Bar FE 500D reinforcement for 367.000 Kgs 77.280

R.C.C. work including bending, binding and placing

in position complete upto floor two level

15 Filling in plinth with sand under floors including 36.600 Cum 429.500

watering ramming, consolidating and dressing

16 Providing and laying cement concrete 1:4:8 (1- 7.670 Cum 2660.300

Cement : 4- coarse sand : 8- hand broken stone

aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

17 Half brick masonary in common burnt clay 8.200 Sq.mt 619.090

building bricks having crushing strength not less

than 35Kg./Sq.Cm. in cement mortar 1:4 (1

Cement: 4 coarse sand) in foundation and plinth.

Extra for half brick masor.ary in super structure

with 2 Nos. of 6mm Mild steel Round bars after

every three course embedded in cement mortar

for ground floor. (B) conventional Bricks.

18 Providing and laying cement concrete pavement 2.300 Cum 4338.110

(25mm to 50mm thick) with 1:2:4 (1-cement : 2-

coarse sand : 4-stone aggregate 20mm nominal

size) including finishing with floating coat of neat

cement complete.

19 Providing and laying white glazed tiles 6mm thick 60.000 Sq.mt 964.470

in flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-cement :

3-coarse sand ) finishing with flush pointing in

20 Providing and fixing PVC printed false ceiling with 30.150 Sq.mt 911.020

flush type with alluminium frame, frame work is

done with three different sections of G.I. sheet of

24 gauge thickness named as C, U and L. The C

section is fixed with hangers at an equal distance

of 36” each and then U section is fixed

perpendicular on C section with steel screws at

and equal distance of 16” each. The complete

frame work is supported by G.I. L angle/6 mm rod

hangers from the roof and L sections is fixed all

around the wall as shown in the diagram. 5mm

PVC sheet strips of size 2 wide are fixd with

counter sunk steel screws on the U section.

Further 3mm PVC sheet is stuck to these PVC

strips with solvent cement such that joining lines

are perfectly matched. P.U. putty is filled, dried

and leveled and requisite coats of primer and

paint is done on the ceiling for getting fine surface

finish etc. complete as per direction of

Engineering and charge manufacturer’s

specification and drawing

21 Dismentalings manglore of country tile roofing 39.600 Sq.mt 93.790

with battens boarding etc. including stacking of

serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii)

A.C. sheet roofing.

22 providing and fixing colour coated steel roofing 39.600 Sq.mt 885.360

sheet (Coating 0.5 mm thickness) of approved

quality and standard make inckuding fixing

screwing in line and level etc. complete

23 Steel work, welded in built up sections framed 4.113 Qtl. 9108.480

work including cutting, hoisting, fixing in position

and applying a priming coat of red lead paint. (A)In

beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and

cross beams. Hip

and jack rafters, purlins conneted to common

rafters and the like

24 Providing and laying polished Kota stone slab 129.000 Sq.mt 1019.390

flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid

over and jointed with grey cement slurry mixed

with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm

25 Provoding and fixing flush door shutters, solid 2.400 Sq.mt 1829.730

core construction with frame of first class

hardwood with cross board and face veneer or

plywood face panels, including anodised

alluminium butt hinges with necessary screws. (B)

Non-decorative type and block board core

anodised alluminium butt hinges in flush door

shutters (2) 35 mm thick.

26 Providing and fixing Kitchen sink with C.I. or M.S. 1.000 Sq.mt 2326.650

brackets, painted white including cutting holes in

walls and making good the same but excluding

fittings. © Vitreous China Sink.(i) 600mm x

450mm x 150mm size

27 Constructing a cooking platform 60 cm. width and 3.000 Rmt 2694.770

70 cm high resting on B.B.Masonry walls

cm.thick in C.M.(1:6) with (i) Fixing or precast

R.C.C.1:2:4) 8 cm. thick slab with marble chips set

in C.M. (1:6) (6mm thick terrazo) with plastering

on exposed faces walls in C.M. (1:4) etc complete.

28 Construction Work Of Ramp. 1.000 Job 10143.140

I/We am/are willing to carry out the work at…% above/below percent(Should be written in figures and words) of the

estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Rs............... Estimated amount put to tender Rs...............

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Panchayat R & B Division Panchayat R & B Sub Division

Notes 1 - The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

Notes 2 - The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

Notes 3 - GST and Income tax TDS will be deducted at a source while making payments of bills.

Note 4 - In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per

actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.