Providing, Supplying of 200mm temper proof air valve with isolating sluice valve, 300mm sluice valve and by back old Dismantle /unusable material for Jalundra- Madhavgadh pipe line project [2nd attempt]

Name of Work:- Providing, Supply of 200mm Temper proof Air valve with isolating Sluice Valve, 300mm Sluice

Valve for Jalundra-Madhavgadh pipe line project. [2nd attempt]

Item Quantities Item of work Rate Total Amount

Item Quantities Item of work Rate Total Amount

No. estimated In In words Unit according to

but may be Figures estimated

more or less Rs. Ps. quantities

Item No.:- 01 Providing & Supplying Ductile Iron Single

Chamber Triple Function Tamper Proof Air Valve as per

IS 1538/AWWA C-512 with body & cover of Ductile Iron

SS Float and Gasket of EPDM with liquid Epoxy Coating

both inside & Out side, Flange drilling as per IS:1538, SS

Bolt & Fastners with Manually Operated Double flanged

Sluice Valve Non rising type Metal seated sluice valve as Forty Seven Thousand

1 75.000 per IS-14846/2000 flages drill to IS 1538 with H/Wheel 47575.00 Five Hundred and No

Operated with both side Coating including S.S. Nut & Seventy Five Rupee Only

Bolts, all taxes excluding GST, insurance, transportation,

fright charges, octroi, inspection charges, loading,

unloading conveyance to departmental store, staking etc.

For 200 mm With isolating sluice valve PN

Item No.:- 02 Providing & Supplying Ductile Iron Manually

Operated double Flange Resilient seated soft sealing

sluice valves with body bonnet of ductile iron/S.G. iron

Wedge fully rubber lined with EPDM food grade quality

and seals of NBR and valve should be vaccum tight and

100% Leak proof with face to face dimensions as per BS Thirty Six Thousand

5163-89/IS 14846-2000/DIN 3202 F 4. all the valves 36328.75 Three Hundred Twenty

should be with electrostatic powder coating both inside & Eight and Seventy Five

Outside including S.S. Nut & Bolts, all taxes excluding Paisa Only

GST, insurance, transportation, fright charges, octroi,

inspection charges, loading, unloading conveyance to

departmental store, staking etc. complete.

For 300 mm sluice valve PN

Thirty Seven Lakh Eighty Six Thousand Ninty Eight Rupees Only

I/We am/are willing to carry out the work at………………………...…% above/below.

Percent (Should be written in figures and words.) of the estimated rates mentioned above. Amount of my/our tender works out as under :-

Estimate Amount Estimate Amount Put to tender. Rs:

Put to tender.Rs: 3786097.50

%below Rs: Add……… %above.Rs:

In words.. In words

Note All works shall be carried out as per public works Department Handbook and other specification of Division or As directed.

Note All the columns is schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his

Note Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all

:3: conditions, site, moisture, weather etc..

Note To be continued on additional sheets, if found necessary.

Signature of the contractor: Signature of the Executive Engineer