PROVN OF VIEW CUTTER AT PERIMETER BOUNDARY WALL, PROVN OF GATE AT SHOPPING COMPLEX, PROVN OF SHED AT MSC AT HQ SWAC AND PROVN OF WATER PROOFING OF LIFT SHAFT AREA OF W8 TOWER AT VSN CHILODA UNDER GE (AF) CHILODA

Excavation in post holes each not exc. 0.50Cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface complete all as specified and directed.

M & L for Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified and directed.

Material and Labour for Hardcore of broken stones of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation of columns, building pillar, posts,struts, etc. filling and mass concrete complete all as specified and directed.

M&L cement concrete Type D2 1 :4 :8 (40mm graded aggregate) in foundation filling and mass concrete, complete all as specified and directed.

S & F framed work such as grills, cooler stand ,grating, etc., with ends of bars shouldered` and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

M& L for hand rails, half round or others stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts brackets etc in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for secuing wire mesh etc.) including all necessary drilling, bolting or reveting etc., and similar work confirming to FE-290 Gde E-165 complete all as specified and directed.

M&L Brick work with flyash brick having crushing strength not less than 75Kg/sqcm, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Returning, filling in approved earth including spreading, levelling watering and well ramming in layers n.exc 25cm in foundation in Soft /loose soil complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where didrected at a lavel n.exc 1.5m above the starting point in soil complete all as specified and directed.

M&L for formwork to sides of concrete foundations, rough finished surfaces of flat concrete, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter,etc complete all as specified and directed.

M&L for formwork to,fair finished surfaces of concrete,square, rectangular or polygonal, sides of pillars, posts, struts, piers, columns and stanchions,etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for RCC Nominal Mix (1:2:4) type B1 using 20 mm graded aggregate as in foundations, including rafts,footings,foundation beams,plinth beams,bases for columns etc. complete all as specified and directed.

M&L for RCC Nominal Mix (1:2:4) type B1 using 20 mm graded aggregate as in columns, pillars, piers etc complete all as specified and directed.

M&L Reinforced cement concrete Nominal mix (1:2:4) (using 20 mm graded stone aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L reinforced cement concrete nominal mix (1:2:4) (20mm graded agg ) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

Material and labour for mild steel TMT bars 10 mm dia and over , cut to length, bent to shape required including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to Fe-410-0 complete all as specified and directed.

Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia stirrups spacers and binder, cut to length, bent to shape required including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to Fe-410-0 complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 by using manufacture/washed plaster sand on fair faces of brick work or concrete surfaces, including finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L cement 1:3:6, type C1, using 20 mm aggregate providing, cement concrete in edges of path, rounded or chamfered on edges etc complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m soft /loose soil in depth and getting out complete all as specified and directed.

S & F for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, Fe 410-W (Gde-E-250) quality-A, etc complete all as specified and directed.

S&F double sided signage board made of 3 mm ACP sheet mounted on MS hollow frame section grouted in concrete base, inlcluding vinyl letters or reflective film printing of approved design and colour complete as per direction of Engr-in-charge.

ar etc complete. Total Dry film thickness is 40 microns complete all as specified and directed.

M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.