Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC INDORA HIMACHAL PRADESH HP | KULLU | HIMACHAL PRADESH | 172001 | L1 | Accepted-AOC qualified | |
| 2 | L2₹9.3 L+₹2,523 (0.27%)Rejected-AOC VILL BHOL PO MAKRAHAN TEHSIL JAWALI DISTT KANGRA HP | L2 | Rejected-AOC qualified | |
| 3 | L3₹9.5 L+₹21,392 (2.31%)Rejected-AOC GOVERNMENT CONTRACTOR VILLAGE PO TEHSIL NURPUR DISTT KANGRA HP | L3 | Rejected-AOC qualified | |
| 4 | L4₹10.3 L+₹1.0 L (10.8%)Rejected-AOC | L4 | Rejected-AOC qualified | |
| 5 | L5₹13.8 L+₹4.6 L (49.3%)Rejected-AOC HIMACHAL PRADESH | L5 | Rejected-AOC qualified |
Tender Value
₹13.5 L
EMD Value
₹27,000
Closing Date
15 Jan 2024, 4:00 pmClosed
Executive Engineer
Jawali Division HPPWD Jawali
Providing and Laying 30mm thick bituminous concrete at RD 0/0 to 1/0, 1.00 Kms
2024_PWD_83613_2
No.PWJ/CB/TA/E-27/23-24-82-87 dated 04/01/24
Open Tender
Civil Works - Roads
Item Rate
90 days
Jawali
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹27,000
5 Feb 2024
9 Jan 2024
16 Jan 2024
9 Jan 2024
15 Jan 2024
9 Jan 2024
9 Jan 2024 - 15 Jan 2024
Amount
Providing and laying spreading and compacting stone aggregate 63mm to 45mm (Sixty three milimetres to forty five milimetres) specified size to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 (Eighty/Hundred) K.N. static Road roller in stages to proper grade and camber applying and brooming with application of crushable screening at the rate of 0.22 cum ( zero point two two cubic metres) per ten square metres, to fill up the intersitices of course aggregate, watering and compacting to the required density grading –2 63mm to 45mm ( Sixty three millimetres to forty five millimetres) size 75mm (Seventy Five millimetres) compacted thickness as per M.O.R.D. technical specifications clause No. 405, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.225 kgs. (Zero decimal two two five kilogrammes) per square metre on the prepared dry and hungry bituminous surfaces cleaned with hydraulic broom as per technical specification clause-503, including hauling of material in all leads lifts as per direction and entire satisfaction of Engineer-in-Charge including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying 30mm (Thirty milimetres) compacted thick bituminous concrete with minimum 100-120 TPH (One Hundred-One Hundred twenty one tonne per hour) hot mix batch/ drum type plant with electronic control Grading-II using crushed aggregate 13mm (thirteen milimetres) nominal size of specified grading premixed with bituminous binder VG-30 (Viscosity grade Thirty) @ 5.5% (five point five percent) of mix weight transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepared surface and rolling complete with smooth wheeled roller 8-10 (eight to ten) tonne capacity for initial break down rolling and vibratory roller 8-10(eight to ten) tonne capacity or pneurnatic tyre roller of 12-15 (twelve – fifteen tonne) with tyre pressure of atleast 0.56MP’a (zero point five six) for intermediate rolling and finish rolling with 6-8 (six to eight) tonne smooth wheeled tandom roller to achieve the desire compaction as per MORTH technical specifications clause 509 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying of hot applied thermoplastic compound 2.5mm (two point five milimetres) thick and 0.19 (zero point one zero) metre wide strip in centre line and 0.30 metre (zero point three zero metre) wide strip in zebra crossing including reflectorising glass beads @ 250gms (two hundred fifty grames) per square metre area, thickness of 2.5mm (two point five milimetres) is exclusive of surface applied glass beads as per IRC:35 (thirty five) in accordance with ministory of road transport specification (Latest revision) and IRC Code the finished surface to be level, uniform and free from streaks and holes including carriage of labours, equipements and materials to various location all modes of transportation, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, Malkana, toll tax, GST or other taxes imposed by the Government.
rajat thakur govt contractor
M/s R.K Mahajan Govt Contractor
RAVI SHARMA
Ravinder Kumar
Vipan Kumar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .