Tender no.

Amount

ST POLE SP-23 (Bottom Portion Hot Dip Galvanized)

MS Channel 100 X 50 mm

M.S Angle 65X65X6 mm

11 KV Pin Insulators poly.Type with Pin

11 KV Disc Insulators poly.Type

11 KV Disc Fitting B&S 45 KN

11 KV X-Arm V-type

Stay set 16x1800mm

Stay wire 7/10 SWG

ACSR Rabbit Coductor

Earth wire G.I 7/16 SWG

M.S Angle 75X75X6 mm (For Gaurding)

G.I Wire 6 SWG for road crossing & earthing

G.I Wire 10 SWG

Earthing Road 20x2500 mm

11 KV VCB FDR 350/500 MVA,400/200/5A,110 V AC

Electronic Static TVM 11 KV RS 232 Port

Cable AL 3x70 Sq.mm XLPE 11 KV

11 KV Pilfer Resistant Metering Cubical

Jointing Kit For 3x70 sq.mm 11 KV XLPE Cable(I/D)

Jointing Kit For 3x70 sq.mm 11 KV XLPE Cable(O/D)

Flexible connector strip 35x6

E/Wire Clamps for ST Poles SP- 23 with N&B

G.I. Strip 35x6

PP Clamps for ST Poles SP- 23 with N&B

Bracing Holding Clamp ST Pole SP-23 with N&B (TOP)

Bracing Holding Clamp ST Pole SP-23 with N&B (Bottom)

Stay Clamps for ST Poles SP- 23 with N&B

Nut & Bolt off Size

Labour

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.(250 cum)

Erection of following single support pole in proper level and alignment alongwith fixing of all accessories like top channel & clamps as per RESSPO construction manual.

Erection of following Double support pole in proper level and alignment alongwith fixing of all accessories like top channel & clamps as per RESSPO construction manual.

Muffing of poles size 0.45 cmx0.60 cm radious with cc 1:3:6 (1 cement :3 coarse sand : 6 grade stone 10 mm nominal size) block 45 cm height from ground level including cost of cement,stone and sand etc.

Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1 cement : 4 graded stone 20 mm nominal size : 8 coarse sand ) block including cost of cement sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment leveling as per RESSPO construction manual.(4800 Cum)

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Fixing tightening and nozzaling of stay with pole and stay rod on required tension as per drawing/RESSPO manual.

11 KV Stay

Grouting of stay in size 0.6x0.6x0.3 in ratio 1:4:8 (1 cement : 4 graded stone 20 mm nominal size : 8 coarse sand ) block including cost of cement sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment leveling as per RESSPO construction manual.(4800 Cum)

Spreading stringing & sagging of 11 KV Line with binding and Jumpring complete.

11 KV T-off connection with all respect

Construction of Retaining Wall for Double Pole Structure Size of Wall 2.75*.95*2 mtr ( Bottom size 2.90*1.10 mtr Top Size 2.60*0.80 Mtr)

(a) Excavation in each type of earth in hilly area by mechanical means for foundation size 2.90*1.10*0.45 mtr including cutting of slopes and trimming of side slopes including lead lift and disposal of surplus material as per direction of Engineer in charge (1.44 cub mtr each wall) (b) Providing C:C size 2.90*1.10*0.45 in open Foundation in C:C 1:4:8 in cluding the cost of Cement Sand and Stone as per direction of Engineer- in -Charge (0.32 cub mtr each wall) (c) Random Rubble Stone Masonry laid in 1:5 Cement Sand and Mortar in Retaining Wall Size of Wall (2.75*0.95*1.80 Mtr) by Approved stone including Supply of all material labour and T&P required for proper completion of work as per direction of Engineer-in- Charge (4.70 cub mtr each wall) (d) Providing C:C size 2.60*0.80*0.10 on top of Retaining Wall in C:C 1:2:4 in cluding the cost of Cement Sand and Stone as per direction of Engineer- in -Charge (0.21 cub mtr each wall)

Earthing of Support as per norms and site requirement with MS Earth rod of 2500 mm longincluding excavation of of pits and digging of MS Rod to proper depth and connecting the earth electrode ith help of GI Wire to pole bottom.

Mounting & Fixing of Fuse Set on Double Pole Structor including Making of connection complete work.

Construction of Metering Room for metering Cubical at S/S end including cost of building/material and it also including the cost of gate etc. Of 10 feet height.

Installation of 11 KV Metering cubical in the metering room with grouting and making of all connection.

Digging of Trunch of size 0.6x0.15x1.5 mtr.and laying of underground 11 KV XLPE Cable with making of brick housing and filling of sand inclusing filling of earth with ramming and repairing of road including cost of cement sand and stone ballast.

Painting of poles with angle and channel and all steel part by one coat of Red oxide primer and two coats of aluminium Paints and two strip of Fluorescent altemate Red and white Paints.(SP-23/21 Pole)

Installation of VCB complete with Grouting and making connection with bus bar

Earthing of VCB at nearby of control room including all material

Route Cleareance by cutting of tree branches,loping and chopping of trees for 11 KV line.

Making of section pole for existing 11 KV Line complete in all respect.

Fixing /Filling of 11 KV Jointing Kit

Fabrication of M.S channel,angle with cutting driling holes as per requred size

Guarding of 11 KV Line for road crossing

Aarna Electrical And Co