Improvement and Augmentation of 4 Nos WSS under Nagrota Bagwan Constitituency

Amount

Excavation in foundation trenches etc. (in pipes and pits) in all kinds of soil such as pick work, jumper work, blasting work soft /hard rock, chiesling soft /hard rock where blasting is prohibited, slushy, daldal and saturated soil I/c pumping or bailling out water with in all heights stacking the excavated soil with 15cm layer when required into plinth ,sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus earth as per direction of Engineer-in-Charge with in all leads and lifts.

P/L cement concrete 1:4:8 (1:cement: 4 sand: 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation & plinth complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge up to all leads and lifts.

Providing and Laying cement concrete 1:1.5:3 (1 Cement:1.50 Sand:3 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work:-

Foundations, footings bases of columns and the like and mass concrete complete in all respect as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts.

In Vertical walls any thickness (but not less than 0.10mm thickness) including attached buttersses pillaster plinth and string courses etc. from top of foundation level upto floor two level complete in all respect complete in all respect including all leads and Lifts as per the direction and satisfaction of Engineer-In-Charge.

Suspended floors, roofs landing and shelves and their support balconies, beams, girders, bressumers and cantilever upto floor level complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge with in all leads and lifts.

Providing laying of mild steel/Tor steel reinforcement for RCC work including bending, binding and placing in position including wire upto floor two level as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batterns and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in-situ-reinforced concrete and plain concrete work in:-

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. In depth in all heights from floor complete in all respectas per the direction and to the entire satisfication of Engineer-in-Charge with in all leads and lifts.

Arches upto 6 meters span complete in all respect including all leads and Lifts as per the direction and to be entire satisfection of Engineer-In-Charge.

Providing Steel work welded in built up section trusses and framed work including cuttint, hosting fixing in position and applying a priming coat of red lead paint in grating framed guards bars railing brackets and similar workscomplete in all respect including all leads and Lifts as per the direction and to be entire satisfection of Engineer-In-Charge.

Providing & fixing 500 mm dia SFRC man hole cover with frame and the weight of frame & cover should not be less than 100 kg complete in all respect within all leads & lifts.

Providing, fixing, Laying and galvanized wire Masquito proof ventilator size 400 mm dia and 300 mm in hieght with frame of M.S. angle iron 40x40x6 mm complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Providing and Fixing Cast iron Sluice Valve Leader/Bir Make of various (with hand wheel) PN-1 as per BIS 786-1984 latest upto date ammendments standard make with bolts, nuts, rubber insertion etc. (The tail pieces if required shall be measured & paid for separately) complete in all respect including all leads and Lifts as per the direction and to be entire satisfection of Engineer-In-Charge. (80mm dia)

Laying, Jointing, Fixing and Testing GMS pipes confirming to relevants BIS codes of below mentioned diameters fully jointed with MS flanges of Table-17 as per IS 6392-1971 excluding the cost of excavation in trenches complete in all respect including all leads and Lifts as per the direction and to be entire satisfection of Engineer-In-Charge.

80mm for Over Flow & Scour Pipes

80mm for Inlet & Outlet Pipes

Finishing wall with water proofing cement paint of approved brand and manufacture of required shade on un-decorated wall surface (one coats) to give an even shade after throughly brushing the surface to remove all dirt, dust and remains of loose material sand papered stopping complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge with in all leads and lifts.

GOVT CONTRACTOR (BID ID -512153)