Miscellaneous civil works of proposed light vehicle parking

Earth work in excavation or in embankment in ordinary soil excavation in the form of regular pits etc. includinglead upto 50 Mtr,lift upto 1.50 Mtrs including cost of all materials, labour & T&P etc. for proper completion of work.

Excavation in soil inHillyArea bymechanical meansWithout useinngDozer including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification

Concrete with cement,coarses sand and 40 mm gauge stone ballast in proportion of 1:3:6 including supply of all material,labour etc. required for proper completion of work as per drwaing and Technical specification Clause 802,803,1202 &1203. disposal complete as directed by the Engineer-in-charge.

Randam Rabble(RR) Boulderstone masonary in 1:6 cement sand mortar with Boulder stone in R/wall, B/wall, and Parapets works i/c all costof material, labours and T&P etc. for proper completion of the work.

Cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- Graded stone aggregate 20 mm nominal size) including cost of all materials, labours & T&P etc. including cost of all materials, labours & T&P etc. including cost of cement 43-grade for proper completion of the work in reoairing / new work of drain / parapets / walls etc. or else where required at site.

Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3

Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets,

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter0.63 mm thick with zinc coating not less than 275 gm/ m²

Providing and fixing precoated galvanised steel sheet roofing accessories( Ridges plain (500 - 600mm)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Brick masonry in 1:4 cement mortar

Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification

HandPacked stone filling in back of wallls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

White washing with lime to give an even shade New work (three or more coats)

Providing and applying two coats of readymixpaint including primer coat of approved brand on steel surface after through cleaning of surface to givean even shade as per drawing and Technical Specification Clause 1701

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawing, R.C.C grade M 20

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Providing and Laying of Mechanically Woven Double Twisted Hexagonal shaped Gabions of galvanized steel, of size 3mX1mX1m with two diaphragms at 1m interval, having mesh opening 100mmx120 mm, mesh wire diameter 3 mm for gabions, edge/selvedge wire diameter 3.9 mm and lacing wire diameter 2.2 mm. (The work includes filling boulders in the gabions).

Please Enable Macros to View BoQ information