Repairing of Rest House Building at Pardi Dist: Valsad (Toilet Repairing Plumbing Piping Sanitary Fittings Ceiling Plaster Colour Work and Miscellaneous work)

Name of work :-

Repairing of Rest House Building at Pardi, Dist: Valsad (Toilet Repairing, Plumbing, Piping, Sanitary Fittings,

Ceiling, Plaster, Colour Work and Miscellaneous work)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Providing and laying broken chine mosaic flooring for terrace using 12 545.4 Sqmt 747.29

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing with water and oxalic

acid etc. as directed.

2 Dismentaling of tiled of stone floors laid in mortar including stacking of 607.10 Sqmt 48.21

serviceable materials and disposal of unserviceable materials with all lead

3 P & L anti skid coloured ceramic tiles 30 x 30 cm size 6 mm thick in 18.60 Sqmt 970.07

flooring treads of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse

4 Providing sand)finishing

and laying coloured glazed with

tiles of the flush

size 300pointing

mm x600 in white

mm x 43.10 Sqmt 1441.22

8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster

5 Removing dry or oil bound distemper by a washing and scraping and sand 192.80 Sqmt 11.30

papering the wall surface smooth including necessary repairs to scratches

6 Removing dry or oil bound distemper by a washing and scraping and sand 129.90 Sqmt 12.90

papering the wall surface smooth including necessary repairs to scratches

7 Wall painting (two coats) with plastic emulsion paint of approved brand 192.80 Sqmt 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

8 Wall painting (two coats) with plastic emulsion paint of approved brand 129.90 Sqmt 85.76

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

9 Finishing wall with waterproofing chemical and weather proof exterior 606.60 Sqmt 230.28

emulsion paint on wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

10 Dismentling of doors, windows, ventilators etc. (wood or steel) shutters 15.00 Nos 187.71

Providing chowkhats architraves,

and fixing 35 holdfastsfor

mm thick shutters andDoors,

andetc. 10.50 Sqmt 5533.68

clerestory windows including Indian teak wood frames 12 cm x 7 cm. size

including anodized alluminium fixtures and fastenings including primer

coat of approved quality and two coats of oil painting etc, complete. (i)

12 Providing and fixing FRP frame size 100x50mm and 35mm thick FRP 4.80 Sqmt 2377.76

shutter with wood grain raised panneled design finish shutter having

13 Providing and fixing window having extruded aluminum Colour anodized 8.10 Sqmt 1583.95

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of

14 Providing & Fixing in position standard extruded approved colour 0.60 Sqmt 2131.10

anodised Aluminum Ventilator with outer frame 65 x 25 mm Stander Box

15 Providinfg and fixing Safty grills of required pattern for windows/ Door 2.10 Sqmt 1660.44

using necessary M.S angle/ M.S pipe, M.S flats and other structural steel

at required spacing including cutting, welding and fabriction etc.

including one coat of primer of approved quality and two coats of oil

16 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 28.00 Rmt. 91.84

Pipe ( SCH- 40) for cold water including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as directed including

17 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 28.00 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings make as approved by

18 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 14.00 Rmt. 836.73

(Type B) conforming to IS 13592-1992 with one end plain and other end

Providing with rubberinring,

and fixing PVC & fittings

cowel to ISIdia

went 110mm 14735-1999 of

to pipes.(B) 2.00 No. 28.79

20 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 2.00 No. 571.08

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

21 Providing and fixing Gun metal check or non-return fullway wheel 2.00 No. 663.43

valve.(E) 40mm dia.

22 Providing and fixing washbasin with single hole for pillar tap with C.I. or 4.00 Each 1506.45

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

23 Providing and fixing screw down bib taps of following size.(A) Brass screw 4.00 No. 186.83

down bib tap polished bright. (i) 15mm dia.

24 Providing and fixing concealed center point to wall ceiling & floor CPVC 8.00 Rmt. 166.86

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.[A]

25 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 4.00 Each 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

26 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets 4.00 Each 603.19

fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

27 Providing and fixing wsh down water closet (European type, W.C. Pan) 4.00 Each 3149.36

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately)(A) vitreous China Pattern :(i) in white

colour, Providing and fixing 12.5 Litres high level C..I. flushing cistern with

A pair of C.I. or Mild steel brackets, womplete with fittings such as

syplionic arrangement, 15mm nominal size brass ball valve with

polythene float, lever G.I. China (60 cm. ) and pull union and couplings for

28 Removing and scraping of old deteriorated plaster of any thickness 23.00 Sqmt 19.57

fromm wall / R.C.C member including stacking of serviceable material and

disposal of unserviceable from site of work with all lead and lift

29 Providing 15mm thick cement plaster in single coat on Rough 23.00 Sqmt 134.43

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (iii) Cement mortar 1:6 (1-

cement:6-sand) Total

Rupees Eight Lakh Twenty Five Thousand Nine Hundred Fifty Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 825950.00 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division