WAITING SHED CONSTRUCTION IN KANDALLOOR FHC-PROJ NO 99/24

Amount

Waiting shed

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD220024/2023-2024:Providing and fixing .3mm thick traford aluminium zinc sheets roofingupto any pitchand fixing with polymer coated J or L hooks,bolts and nuts 8mm dia GI plain and bitumen washers or with self drilling fastener and EPDM washers etc.complete(excluding the cost of purlins,rafters and trusses) including cutting sheets to size and shape wherever required. re coated (size, shape and pich of corrugation as approved by Engineer - in -charge) 0.50mm(+0.05%)total coated 240mpa steel grade,5-7 microns epoxy primer on both side of the sheet and thickness with sinc coating 120gm/sqm asper IS:277.in polyester top coat 15-18 micron . Sheet shouid have protective guard film of 25 microns minimum to avoid scrratches during transportation and should be supplied in single length up to 12m or as desired by engineer - in-charge. The sheet shall be horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape where ever required

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD220012/2023-2024:Providing and fixing unplasticised rigid half split PVC rainwater pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 using as rain water gutter,single socket pipe.

50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

MOHANAN NAIR V

SASIDHARAN PILLAI

Bidder Name

SASIDHARAN PILLAI

MUHAMMED HILAL N

MOHANAN NAIR V