Annual Maintenance contract of Civil works at HCL Taloja Copper

Amount

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. - 40 mm thick with 20 mm nominal size stone aggregat

Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complet

12 mm cement plaster of mix : (1 cement: 4 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with Sponge.

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. -- 12 mm cement plaster sqm 350.15

White washing with lime to give an even shade : Old work (two or more coats)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete sqm 14.20

Colour washing such as green, blue or buff to give an even shade : 13.39.1 New work (two or more coats) with a base coat of white washing with lime sqm 38.95

Finishing walls with water proofing cement paint of required shade : - Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) conten-13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : 13.90.1 Old work (one or more coats)

13.98 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : -- One or more coats on old work sqm

Painting with aluminium paint of approved brand and manufacture to give an even shade: - One or more coats on old work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 115.15

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge :-

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

PROVIDING & FIXING OF STANDARD QUALITY PVC PIPES WITH THREADING THE PIPES (ISI MARK) 20 mm dia

PROVIDING & FIXING G.I./ PVC BENDS((ISI MARK) 15 mm dia

PROVIDING & FIXING G.I./ PVC BENDS((ISI MARK) 20mm dia

PROVIDING AND FIXING 1/2" GI/UPVC coupling

PROVIDING AND FIXING 20MM GI/UPVC coupling

PROVIDING AND FIXING 25MM GI/UPVC coupling

PROVIDING & FIXING G.I./ PVC SOCKET (ISI MARK) 15 mm dia

PROVIDING & FIXING G.I./ PVC SOCKET (ISI MARK) 20 mm dia

G.I. PROVIDING & FIXING G.I./ PVC ELBOW(ISI MARK) 15 mm dia

G.I. PROVIDING & FIXING G.I./ PVC ELBOW(ISI MARK) 20 mm dia

Providing & Fixing union (ISI mark) 15 mm dia

Providing & Fixing union (ISI mark) 20 mm dia

PROVIDING & FIXING G.I. / PVC TEES WITH ISI MARK. 15 mm dia

PROVIDING & FIXING G.I./ PVC TEES WITH ISI MARK. 20 mm dia

PROVIDING & FIXING 1/2" MT

PROVIDING & FIXING 20mm MT

PROVIDING & FIXING 25mm MT

PROVIDING & FIXING OF G.I. / PVC NIPPLE ( ISI MARK ) IN 15MM DIA

PROVIDING & FIXING OF G.I. / PVC NIPPLE ( ISI MARK ) IN 20MM DIA

Providing and fixing brass bib cock of approved quality : 18.15.1 15 mm nominal bore each 302.55

PROVIDING & FIXING 1/2" two way Bib cock

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1 25 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length - 15 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length - 20 mm nominal bore

Providing & fixing chromium plated brass push taps of approved quality with all material & labour complete as per specification. - 15mm size

Providing & fixing of 2" Nahani trap

17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. each 297.55

18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 - 15mm nominal bore

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 17.69.1 Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms each 99.75

17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. - Semi rigid pipe - 32 mm dia

17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. - Flexible pipe pipe - 32 mm dia

Providing & fixing of 15mm GI/UPVC Barrel Nipple

Providing & fixing of 25mm GI/UPVC Barrel Nipple

14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in?Charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. sqm 39.00

Removing of MS doors, doors, Windows etc.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.-In cement mortar

Civil work

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. - All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m

Providing & fixing Night latch lock manufactured as per best engineering practise for doors with all necessary materials and labour etc all complete (Godrej Make or equivalent)

Providing & fixing of Fitting of Godrej make or Equivalent furniture lock .

Providing & fixing of Fitting of Magnet for rack approved quality

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 21.4.1 With stainless steel cover plate minimum 1.25 mm thickness

9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer?in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing & fixing of Fitting of Drawer sliding channel up to 14 inch

21.16 Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in?charge 21.16.1 Anodized (AC 15 ) aluminium each 79.60

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. - 25 mm diameter.

Providing & fixing P.V.C. Pipe. 40 mm

Providing & fixing P.V. C. PIPE, 50 mm

Providing & fixing P.V.C. Pipe. 100 mm

Providing & fixing bend, P.V.C. 40 mm

Providing & fixing bend, P.V.C. 50 mm

Providing & fixing bend, P.V.C. 100 mm

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 17.18.1 10 litre capacity - White each 999.95

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.14.80.2 Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

17.20 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 17.20.1 White solid plastic seat with lid

Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. sqm 453.25

Providing & fixing G.I./ S.S./PVC mosquito net with wooden frame.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 14.5.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) sqm 890.50

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. - 15 mm nominal bore

Providing & fixing of Aluminium AL drop-300mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing &fixing Aluminum bathroom door in 2” section with water proof hard board and complete in all respect.

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and laying chemical coating for water proofing at terrace, chajja, etc. after preparation of surface & applying as per manufacture specification/ instruction(Guarantee for 2 years)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,- 110 mm diameter

Providing & laying of RCC gutter cover of size 1.5' x 3' & 50mm thickness, with top hook handling system as directed by Engineer-in-Charge.

Providing and fixing of curb stone size 500mmx300mmx100mm in line & level with 1:3 (cement :sand) with necessary excavation.

Repair of damage RCC road Damage part of the RCC road to be removed and make a proper shape ,required excavation for 230mm thk soling work and RCC(1:2:4) 150mm thk with 100mm c/c horizontal & vertical (jally)tor steel(10mm thk)

Providing & Fitting of Overhead HDPE Tank – 500 Ltr capacity of Sintex make, complete as specified & as directed

ITEM SUPPLY :

Providng Material supply & labour charge for M.seal-100grm

Providing Material supply & labour charge for White cement--1 kg

MANPOWER SUPPLY :

PAINTER - providing the following categories of labor for miscellaneous work: Schedule of daily/ 8 hourly labour rates. The rates below shall be inclusive of Hand tools, contractor’s supervision, overhead and profits

PLUMBER - providing the following categories of labor for miscellaneous work: Schedule of daily/ 8 hourly labour rates. The rates below shall be inclusive of Hand tools, contractor’s supervision, overhead and profits

MASON - providing the following categories of labor for miscellaneous work: Schedule of daily/ 8 hourly labour rates. The rates below shall be inclusive of Hand tools, contractor’s supervision, overhead and profits

HELPER - providing the following categories of labor for miscellaneous work :Schedule of daily/ 8 hourly labour rates.The rates below shall be inclusive of Hand tools, contractor’s supervision, overhead and profits

CARPENTER - providing the following categories of labor for miscellaneous work: Schedule of daily/ 8 hourly labour rates. The rates below shall be inclusive of Hand tools, contractor’s supervision, overhead and profits.

RCC / CONCRETE WORK :

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth.5.22A.3 Cold twisted bars Kg 83.50

Centering and shuttering including strutting, propping etc. and removal of form for :Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. and Suspended floors, roofs, landings, balconies and access platform etc.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work

1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 20 mm nominal size

Providing and laying in position machine batched and machine mixed design concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).- All works above plinth level upto floor V level cum -

RUBBLE WORK :

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. - Cement mortar 1:6 (1 cement : 6 coarse sand)

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. sqm 730.20

TILE / STONE WORK :

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete-11.41.2 Size of Tile 600x600 mm

Providing and laying Ceramic glazed floor tiles of size 300x300 mm/300mmX450mm/ (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying Ceramic glazed floor tiles of size 300x600 mm/600mmX600mm / (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. sqm 3526.60

Providing & fixing of Black Cuduppah polished stone sills or kitchen platforms, partitions of thickness varying from 25 to 30 mm over cement mortar bedding of 25 to 40 mm in proportion 1:4 including cutting, polishing the edges etc. with joint filling, all complete.

Removing of old breaking tiles & providing fixing of new floor & wall tile with cement slurry with all, complete

WOODEN WORK :

Removing or fixing of wooden / steel doors, window etc. with cement mix & all in size : 1 x 2 mtr.

Wooden wall rack of 18mm water proof ply with outside sunmica, lock, handle & inside hand polish with depth upto 15 inch, etc complete.

Providing and fixing Wooden plain self , with polishing, complete 7 x 1.25 ft

Providing and fixing New wooden tables, with polishing, complete

Providing and fixing Notice board, with polishing, complete

Modification of wooden item as: cabinet, box, rack etc. as per same finish

Repairing of wooden doors, windows etc. with as per same

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws .

Providing and fixing 1.25 mm thick factory made laminated veneer lumber furnished conforming to IS : 14616 and TADS 15:2001 (Part B), all complete as per directions of Engineer-in-charge.

Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work

ALUMINIUM & GYPSUM WORK :

Providing & fixing of Partition in 18 gauge frame & 5mm plain glass with all respects, complete ( with door also )

Repairing or removing & fixing of old aluminum partition, door & window

Providing & fixing of Aluminum Sliding window in 18 gauge frame & 5mm glass, complete

12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) sqm 1117.65

Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : - Light shade pigment using white cement sqm 1223.90

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. kg 86.05

Cutting, alightment and modification of existing HDPE pipe line 6" dia HDPE

Welding joint on HDPE pipe-PIPE JOINT

CIS GLOBAL INFRATECH PRIVATE LIMITED

R. S. Developers and Fabricators