Construction of Office Building for Chief Engineer MZ Executive Engineer Jal Shakti Division Mandi Tehsil Sadar Distt Mandi HP

Amount

Schedule I : Structural Design / Soil Bearing Capacity Investigation

Providing Consultancy for providing structural designs / drawings and assessing safe bearing capacity of the land proposed for construction of building.

Schedule II :- Civil Work

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft / hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15 cm. layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) with in all leads and lifts.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) with in all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form for all heights :

Foundations, footings, bases of columns, etc. for mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platform.

Edges of slabs and breaks in floors and walls Under 20 cm wide.

Stairs, (excluding landings) except spiral-staircases.

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : with minimumm 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) with in all leads and lifts.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, huttering, finishing and reinforcement : with minimum 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm. with in all leads and lifts.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of entering, shuttering, finishing and reinforcement, with minimum 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). with in all leads and lifts.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of entering, shuttering, finishing and reinforcement, with minimum 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). with in all leads and lifts.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of entering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). with in all leads and lifts.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, huttering, finishing and reinforcement : with minimum 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm. with in all leads and lifts.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Mild steel and Medium Tensile steel bars with in all leads and lifts.

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With Modular bricks with in all leads and lifts.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) with in all leads and lifts.

Providing and Fixing factory made uPVC white colour casement / Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for Fixing frame to finished wall and necessary stainless steel screws, etc.Profile of frame & sash shall be mitred cut and fusion at all corners, mullion (if required) shall be also fusion welded including drilling of holes for Fixing hardware's and drainage of water etc. After Fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm)

Providing and Fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for Fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for Fixing hardware's and drainage of water etc. After Fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)

Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Area of window above 1.75 sqm upto 2.50 sqm) with in all leads and lifts.

Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) with in all leads and lifts.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge : Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. within all leads and lifts.

Providing and fixing glazing in uPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge . (Cost of uPVC snap beading shall be paid in basic item): Toughened glass 12 mm thickness with Hole within all leads and lifts.

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading within all leads and lifts.

Providing and Fixing of Cup Board with Action Tesa HDHMR (High Density High Moisture Resistant) One Side Pre Laminated Board of size 18 mm. anti termite and dampness proof with Back including all materials and fittings etc. in all leads and lifts as per the entire satisfaction of the Engineer - in - Charge.

6 mm cement plaster in ceiling of mix in cement mortar 1:3 ( 1 cement : 3 sand) within all leads and lifts.

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) within all leads and lifts.

Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. within all leads and lifts.

Providing plaster of paris false ceiling up to a height of 5.00 meter above floor level comprised on plaster of paris 10 mm thick applied on rabbit wire mesh fixed on GI sheet channels grid 125 mm with 15" gap in between and reinforced with rabbit wire mesh properly fastened on celing with the help of fasteners and wire nails including cost of 450 mm wide bracket running along the walls and properly edges on bracket complete in all respect and as per direction and to the entire satisfaction of the Engineer-in-Charge.

Providing Boulder filling dry hand packed tightly under floors within all leads and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:6:12 (1 cement : 6 coarse sand): 12 graded stone aggregate 40 mm nominal size. within all leads and lifts.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the rchitectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement ortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black,Cherry Red, Elite Brown, Cat Eye or equivalent with in all leads and lifts.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm with in all leads and lifts.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm with in all leads and lifts.

Providing and Fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile with in all leads and lifts.

Providing and Fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 11.21.2.1 Acid and alkali resistant tile.

Providing Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. within all leads and lifts..

Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20 mm nominal size. within all leads and lifts..

Proving under layer for plinth protection of 75 mm thick (unconsolidated) bed dry brick / stone Aggregate 40 mm nominal size will rammed with rammed and consolidated and grouted with fine sand including preparation of ground. within all leads and lifts.

Constructing course rubble hammer dessed "U" shape open surface drain with side wall 15x22 cm in cement mortor 1:6 (1cement : 6 sand) and inside plastering with cement plaster 1:3 (1cement : 3 sand) including earth work and laayng 10 cm cement concrete in 1:5:10 (1 cement :5 sand : 10 graded stone aggregate 40 mm nonminal size) and 7.5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.within all leads and lifts.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete within all leads and lifts.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work. within all leads and lifts.

Steel work welded in built up sections/ framed work, including cutting, hoisting, Fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. within all leads and lifts.

Providing and Fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube. within all leads and lifts.

Providing and Fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c Fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding Fixing ccessories such as nuts, bolts, fasteners etc.).

IP Based EPBAX System- Supplying, installation, testing and comissioning of IP based EPBAX System comprising of core switches & L2 switches with 10 G, 10 giga SFP modules, industry standard appliance server, cloud based, enterprise-grade UC solution, MID/ENTRY level IP/SIP phone with, dual 1 gig ports, racks, CAT 6A cable, patch panels, OFC( Rate applicable on plinth area excluding service/common area) with in all leads and lifts.

Extra Cost for making edge of steps of stair case by grinding the granite to form the nose including cost of brass patti sandwitched between the tread granite and extra granite strip as specified and as directed by the Engineer-in-Charge.

Schedule III :- Water Supply and Sanitary Installation

Providing and fixing high pressure uPVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. single equal branch,oval access door,collars, "P" or "S" trap etc., with clamps at 1.20 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge Concealed work, including cutting chases and making good the wall etc.

110 mm dia

90 mm dia

Providing and Fixing UPVC floor trap 110 mm x 90 mm ISI marked of self cleaning design including Fixing with approved, cost of cutting and making good the wall and floors etc. complete within all leads and lifts and other incidentals including carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall with in all leads and lifts.

15 mm nominal outer dia Pipes.

20 mm nominal outer dia Pipes.

Providing and fixing Floor Drain Cover having size 138 mm (Bright/Matt) grating of approved quality and colour good look round. with in all leads and lifts.

Providing and fixing water closet squatting pan (Wall Hung EWCs with seat Cover) with duroplast slim soft close seat and concealed cisterns set with full frame and actuator knob H type with P or S trap including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever equired with in all leads and lifts.

Providing and Fixing Health Faucet ABS Body with 1.00 meter SS braided connection pipe of approved quality and colour with necessary fitting etc. complete with in all leads and lifts and other incidentals including carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and Fixing one piece wash basin with integrated half Pedestal, 15 mm dia CP Brass single hole basin mixer with 450 mm braded connection pipe single lever of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with in all leads and lifts.

Providing and Fixing one piece wash basin with full cabinet set (HDHMR) having size 24" , 15 mm dia CP Brass single hole basin mixer with 450 mm braded connection pipe single lever of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with in all leads and lifts.

Providing and Fixing of Mirror 700x500 mm 5 mm thick with double coat for protection and longebity, grounded edges for safty and silver plating on black for better reflection with C.P. brass screws and washers complete in all leads and lifts.

Providing and Fixing Urinal with integrated wash basin and sensor type having size 330x310x540 mm respectively with Corvin having size 90x320x720 mm with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required with in all leads and lifts.

Providing and Fixing Angle valve with wall flange for basin mixer and geyser points of approved quality conforming to IS:8931 : 15 mm nominal borewith in all leads and lifts.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms with in all leads and lifts.

Providing and fixing toilet paper holder : with Flap Guard with in all leads and lifts.

Providing and fixing PTMT Soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms with in all leads and lifts.

Providing and Fixing Double bowl Stainless Steel manufactured from 1.0 mm thick 304 grade sze 838x508 mm depth 203 mm top mount kitchen sink with sink mixer (wall mounted) with 150 mm long swivel spout, connecting legs and wall flanges as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required in all leads and lifts.

Providing and fixing SS Full Thread 32 mm Waste Coupling for wash basin and sink, of approved quality and colour with in all leads and lifts.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Providing and Fixing Flexible Stainless Steel Hose PVC connection pipe with brass unions : 1500 cm length : 15 mm nominal bore with in all leads and lifts.

Providing and Fixing Water Purifier Aqua Guard / kent / (RO-UV) with necessary fittings of required size for inlet or outlet and inside paint of approved quality complete including hoisting complete in all respects.

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 with in all leads and lifts.

Schedule IV :- Electrial Installation

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Cable Make : PLAZA / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI / FENOLIX. Group C.

Supplying and fixing G.I. Modular box of suitable size with modular plate and cover in front on surface or in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of suitable size with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Supplying and fixing G I modular Box of suitable size with modular plate and cover in recess including providing and fixing 3 Nos 5 pin 5/6 Amps modular socket outlet, 3 Nos 5/6 Amps modular switch, as required etc. as required complete in all respect. (Computer point)

Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.

Supplying and fixing Modular RJ-45 Cat-6 Jack including connections etc. as required. RJ-45 Jack, Modular type.

Supplying and fixing following rating Modular switch /socket on the existing switch box / cover including connections etc. as required. Telephone socket outlet, Modular type.

Supplying and fixing bakelite batten / angle holder including connections etc. as required:- Make : Anchor, Cona, SSK

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:- Make : Anchor , Cona ,SSK

Providing, Installation, testing and commissioning of Ceiling Fan 1200 mm sweep with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make : Usha / Bajaj / Anchor Panasonic.

Providing and installation of Exhaust Fan, Light duty, (Domestic) 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-. Make : Usha / Bajaj / Anchor Panasonic.

Supplying & fixing 36 Watt Surface mounted LED panel made from extruded aluminium housing (surface) 2ft x 2ft complete with all accessories, connections, testing and commissioning etc. as required complete in all respects as per entire satisfaction of Engineer- in- Charge. Make:- Make : Wipro / Bajaj / Phillips / Jaquar / (Twinkle) Luminaires .

Supplying & fixing 20 Watt Ultra slim LED panel made from extruded aluminium housing frame Surface/recess/pendant )1ft x1ft complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects as per entire satisfaction of Engineer- in- Charge. Make:- Make : Wipro / Bajaj / Phillips / Jaquar / (Twinkle) Luminaires .

Supplying & fixing DOWN LIGHT 12W light recess round / square with aluminium housing,complete with all accessories, connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:- Make : Wipro / Bajaj / Phillips / Jaquar / (Twinkle) Luminaires .

Supplying & fixing LED TUBE 20 W,PC BATTEN, ,complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make:-Jaquar/Twinkle/Panasonic.

Supplying & fixing LED Mirror Light 1 FEET TUBE 5 W 6500 K,PC BATTEN, ,complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Supplying and fixing Air Conditioner of Lloyd / Samsung / Voltas / Carrier / IFB or equivalent make 1.5 tone capacity split type Hot and Cold including voltage stabilizer 4 KVA 230 volts AC supply and stand for outdoor AC unit 5 star rating complete with installation connection etc. as required complete in all respect.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete in all respectas per entire satisfaction of the Engineer in charge. Make : L&T / Legrand / Siemens.

6 amps SP Cat-A

16 amps SP Cat-A

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-Make : L&T / Legrand / Siemens. Double pole. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. (Category-A)

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-12 way

Double door-16 way

Supplying and drawing following UTP 4 pair CAT 6 Lan cable for internet in the existing surface / recessed, steel / PVC conduit as required.

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete in all respectas per entire satisfaction of the Engineer in charge. Cable Make : PLAZA / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI / FENOLIX.

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

2x10.0 Sq. mm.

Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respectas per entire satisfaction of the Engineer in charge. Cable Make : PLAZA / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI / FENOLIX.

Supplying and drawing of 3x1.5 Sq. mm. PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required complete in all respectas per entire satisfaction of the Engineer in charge. Cable Make : PLAZA / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI / FENOLIX.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x16+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respectas per entire satisfaction of the Engineer in charge. Cable Make : PLAZA / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI / FENOLIX.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required complete in all respect as per entire satisfaction of Engineer- in- Charge.Copper (Pure).

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required complete in all respect as per entire satisfaction of Engineer- in- Charge.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make : AKG/ BEC / NIC/ Diplast. 25 mm. dia

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable 120 Sq.mm (3.5 core) working voltage 1100 volts grade on surface etc. of the required size:-.Cable Make : -Cable Make : PLAZA / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI / FENOLIX.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor as required

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding Each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- 800mm x 600mm x 300mm deep (nominal) including, MCCB 63amps = 1 nos, Bus Bar 63 Amp. = 0.5 Mtr . metering set, CT Coil and internal control wiring etc. as required complete in all respect.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding Each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- 800mm x 600mmx450mm deep (nominal) including,MCCB 100amps = 1 nos, Bus Bar 100 Amp. = 0.5 Mtr . metering set , CT Coil and internal control wiring etc. as required complete in all respect.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding Each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- 1400 mm x 1000 mm x 450 mm deep (nominal) including,MCCB 300 amps = 1 nos Bus bar 300 amps = 0.8 mtr MCCB 100 amps = 2 nos, . MCCB 63 amps = 2 nos, metering set , CT Coil and internal control wiring etc. as required complete in all respect.

Providing and installation of stationary storage type Electric water heater (Instant Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- 3 Liter capacity water heater (Cat-A)

Schedule V :- Fire Fighting System

Supplying, installation, Testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of 450 lpm at 35 m Head, complete in all respects, as required: (Terrace Pump)

Providing, laying, Testing & commissioning of 'C' class heavy duty MS pipe 100 mm dia conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and Fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Supplying and Fixing Single Headed Gunmetal internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :

Supplying, Fixing, Testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of 100 mm dia within all leads and lifts.

Supplying, Fixing, Testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of 40 mm dia within all leads and lifts.

Supplying and Fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete required.

Providing, installation, Testing and commissioning of non-return valve of 100 mm dia confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required.

Providing, installation, Testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 100 mm dia

Supplying and Fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal

Supplying and Fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required; -20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 -20 mm nominal internal dia gun metal globe valve & nozzle. - Drum and brackets for Fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 mtrs

Supplying & Fixing 63 mm dia Gun Metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required.

Supplying and Fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way - 100 mm dia M.S. Pipe

Supplying and Fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Supply and installation of ABC powder stored pressure type portable fire extinguisher ISI marked 15683- 2006 & ISO - 9001, complete as required capacity - 6 kg

Supply and installation of CO2 type fire extinguisher ISI marked steel body 15683- 2006 & ISO - 9001, complete as required capacity - 4.5 kg

M/S NDN Constructions (BID ID -446620)

VIJAY KAPOOR CONSTRUCTIONS (BID ID -446238)