CONSTRUCTION OF U.H.C. BUILDING AT F.P. NO :- 33, DRAFT T.P.S. NO: 64 (GHODASAR-2) IN RAMOL WARD , EAST ZONE, AHMEDABAD

Name of Work : CONSTRUCTION OF U.H.C. BUILDING AT F.P. NO :- 33 , DRAFT T.P.S.

NO: 64 (GHODASAR-2) IN RAMOL WARD , EAST ZONE, AHMEDABAD

Bill of Quantities

Unit Rate Amount

Civil Work Estimate

1 Demolition & Dismantling work

Demolition of RCC work using Hydra

Breacker including stacking of servicable

a 8.00 materials and disposal of unservicable

materials with all lead and lift.Removal

Of Existing Building Foundation and

Super Structure If Any. 1047.38 Cu.M.

Demolition of Brick work and stone

masonry including stacking of

serviceable materials and disposal of

unserviceable materials with all lead and

lift.(ii) In Cement Mortar.Removal Of

Existing Building Foundation and Super

Structure If Any. 544.95 Cu.M.

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc.

c stacking of serviceable materials and

disposal of unserviceable materials with

all lead and lift.

i 5.00 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 5.00 (ii) A.C. sheet roofing. 53.55 sq.mt

Dismentling steel work including

distempering and stacking the materials

with all lead and lift.

Dismentling doors, windows, ventilators

etc. (wood or steel) shutters including

e 2.00 chowkhats architraves, hold fasts and

other attachment etc. complete and

stacking them with in all lead and lift.

(i)Notexceeding 3 Sq.M. in area. 185.85 Each

Removing & Scrapping of Old

deteriorated Plaster of any thickness

f 250.00 from Masonary / R.C.C. member

including stacking of serviceable material

& disposal of un serviceable from site of

work with all lead & lift. 19.38 Sq.M.

Dismentaling any type tiled of stone

floors laid in mortar including stacking of

g 50.00 serviceable materilas and disposal of

unserviceable materials with all lead and

lift. 47.25 Sq.M.

2 Excavation for foundation including

sorting out stacking of useful material &

disposing of excavated stuff upto 50 mt.

lead. Loose & Soft soil.Excexuted With

Mechanical Effort

a 1131 up to 1.5 mt. depth 115.92 Cu.M.

b 1043 1.5 to 3.0 mt. depth. 128.52 Cu.M.

c 405 3.0 to 5.0 mt. depth 141.11 Cu.M.

d 500.00 Add extra for Disposing off the

excavated stuff of above items for lead of

e 500.00 Add extra for Disposing off the

excavated stuff of above items for lead of

Providing and installing cast in situ single

under reamed piles of specified diameter

and length below pile cap, excluding the

cost of Concrete, steel reinforcement but

including the cost of boring with

bentonite solution and the length of the

pile to be embedded in pile cap etc. all

complete. (Length of pile for payment

shall be measured upto to the bottom of

i 10.00 400 mm dia. Piles 644.63 Rmt.

ii 10.00 450 mm dia. Piles 705.03 Rmt.

g Extra over single under ream for

providing additional bulbs in under

reamed piles, under specified diameter

excluding the cost of Concrete, steel

reinforcement (only the nos. of extra

bulbs are to be paid).

t 1.00 400 mm dia. Piles 813.05 Each

ii 1.00 450 mm dia. Piles 1103.43 Each

3a 1 Provdg. & laying cement concrete 1:5:10

(1 cement : 5 course sand : 10 hand

broken aggregates 40 mm nominal size)

and curing complete, excluding cost of

form work in foundation & Plinth.

3b Provdg. & laying cement concrete 1:3:6

(1 cement : 3 coarse sand : 6 hand

broken stone aggregates 40 mm nominal

size) and curing complete excluding cost

of form work in

232.00 (A) Foundation and plinth 2976 Cu.M.

3c 95 Supplying of graded hand brocken stone

size of 90 mm to 127 mm at site (Rubble

3d 415 Labour charges for spreading the spouls

90 mm to 127 mm thick layer good earth

filling in voids correcting the grade &

camber comp. with rolling, watering, incl.

preparing thesurface by brushing for

removing all loose or dirts ect.comp.

4 2.00 Provdg. & laying cement concrete 1:4:8

(1 cement : 4 coarse sand : 8 hand

broken stone aggregates 40 mm nominal

size) and curing complete excluding cost

of form work in foundation& plinth.

5 2100 Filling available excavated earth

(excluding rock) in trenches, plinth, sides

of foundations etc. in layers not

exceeding 20 cm. in depth consolidation

each deposited layer by ramming and

6 Conveyance charges of earth lime,

murrum, building rubbish, manure,

garbage, sludge, excavated rock, fly ash,

aggregate of any kind etc. comp.

a 50.00 Conveyance charges upto 1 km 46.63 Cmt

b 50.00 Conveyance charges upto 2 km 60.69 Cmt

c 3200.00 Conveyance charges upto 5 km 100.44 Cmt

d 3200.00 Extra For Lead on Above Item Above

km & upto 6 km 9.26 Cmt

e 3200.00 Extra For Lead on Above Item Above

km & upto 7 km 9.26 Cmt

f 3200.00 Extra For Lead on Above Item Above

km & upto 8 km 9.26 Cmt

g 3200.00 Extra For Lead on Above Item Above

km & upto 9 km 9.26 Cmt

h 3200.00 Extra For Lead on Above Item Above

7a 10 Filling in plinth with sand under floors

including watering, ramming,

consolidating, compacting and dressing

etc. completed.

7b 225.00 Filling in foundation and plinth with

murrum or selected soil in layers of

cm. thickness including watering,

ramming and consolidating etc.

8 Brick work using common burnt clay

building bricks having crushing strength

not less than 35 kg/Sq. cm. in cement

mortar 1:6 (1 cement : 6 fine sand)

conventional brick

a 110 (a) in foundation & Plinth 3981.21 Cu.M.

b 217.00 Super structure Upto Floor Two Level

c 156.00 Super structure Above Floor Two Level

9 I.Half brick masonry in common burnt

clay building bricks having crushing

strength note less than 35 Kg/Sq. Cm. in

cement mortar 1:4 (1 cement : 4 coarse

sand) using conventional brick in Super

structure upto floor Four level

a 113.00 All Floor Level 646.7 Sq.M.

10.1 Providing and laying controlled cement

concrete of M-25 Grade and curing

complete, Excluding the cost of form

work, Scaffolding, cost of reinforcement

for reinforced concrete work For any

Height up to any FloorLevel.

a Foundations,Raft,Footings,Mass

50.00 concrete 4238.04 Cu.M.

b1 35.00 RCC Retaining wall at All Floor 4519.88 Cu.M.

c1 Tie-Beam, Lintel , Beam- Bracket, Stair

Case & Landing, Coping ,Slab, balcony,

weather shed, loft , any cantilever etc All

24.00 Floor 4496.07 Cu.M.

d1 Columns,Pillars, posts and struts at All

5.00 Floor 4593.91 Cu.M.

10.2 Providing and laying controlled cement

concrete of M-20 Grade and curing

complete, Excluding the cost of form

work, Scaffolding, cost of reinforcement

for reinforced concrete work For any

Height up to Floor Four Level.

a 3.00 Foundations,Raft,Footings,Mass

concrete 3977.88 Cu.M.

b1 47.00 Tie Beam , Lintel , Beam- Bracket

Coping ,landing, Slab, balcony, weather

shed, loft , any cantilever etc at All Floor 4460.36 Cu.M.

c1 3.00 Column at All Floor 4558.2 Cu.M.

d1 1.00 Stair Case All Floor 5418.91 Cu.M.

Providing and laying in position Ready

Mixed M250 grade concrete for

reinforced cement conctere work , using

cement content as per approved Design

Mix manufactured in fully automatic

batching plant and transported to site of

work in transit mixer for all lead having

continuous agitated mixer, manufactured

as per mix design of specified grade for

reinforced cement concrete work

including pumping of R.M.C. from transit

mixer to site of laying with all lead and

lift, excluding the cost of centering

shuttering finishing and reinforcement

including cost of admixtures in

recommended proportions as per IS:

9103 to accelerate/ retard setting of

concrete, improve workability without

impairing strength and durability as per

direction of the Engineer - in charge.

Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained)

(Cement level 450 kg )

Providing and laying in position Ready

Mixed M200 grade concrete for

reinforced cement conctere work , using

cement content as per approved Design

Mix manufactured in fully automatic

batching plant and transported to site of

work in transit mixer for all lead having

continuous agitated mixer, manufactured

as per mix design of specified grade for

reinforced cement concrete work

including pumping of R.M.C. from transit

mixer to site of laying with all lead and

lift, excluding the cost of centering

shuttering finishing and reinforcement

including cost of admixtures in

recommended proportions as per IS:

9103 to accelerate/ retard setting of

concrete, improve workability without

impairing strength and durability as per

direction of the Engineer - in charge.

Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained)

(Cement level 400 kg )

Drilling suitable holes in reinforced or

plain cement concrete with power driven

drill machine to a minimum depth of

80mm upto 250mm in RCC beams,

lintels, columns and slabs to introduce

steel bars for sunshades/balconies

including fixing the steel bars in position

using Hilti Chemical HY200-R but

excluding the cost of reinforcement, all

complete as per direction of Engineer-In-

a 75.00 8 mm Dia in 80 mm Deep & 12 mm Dia

Drilling 183.52 Each

b 500.00 10 mm Dia in 100 mm Deep & 14 mm

Dia Drilling 263.66 Each

c 500.00 12 mm Dia in 120 mm Deep & 16 mm

Dia Drilling 343.80 Each

d 40.00 16 mm Dia in 160 mm Deep & 20 mm

Dia Drilling 608.63 Each

e 5.00 20 mm Dia in 200 mm Deep & 25 mm

Dia Drilling 1024.44 Each

f 5.00 25 mm Dia in 250 mm Deep & 32 mm

Dia Drilling 1938.54 Each

11 Providing and laying controlled cement

concrete 1:2:4( 1cement : 2 coarse sand

: 4 Graded stone aggregate 20 mm

nominal size ) and curing complete,

Excluding the cost of form work and

reinforcement for reinforced concrete

a 1.00 Foundations, footings, base of

columns,grade slab and mass concrete. 3923.53 Cu.M.

b 1 slab, landing shelves, Balconies, lintels,

beams, girders, and cantilever, up to

aany floor level. 4012.47 Cu.M.

505.00 P/A Trimix with dewatering machine and

floater machine on constructed R.C.C.

c work incl. cost of machine and labour

etc. comp. as directed.

d 150.00 Making 15 mm Groove in R.C.C work on

road and filling it with poly sulfied selant

and finished it good incl. all labour

charges etc. comp. as directed

26.00 Providing and laying and fixing 25 mm

thick expansion joint by hydrocell semi

rigid UV resistance with high

e performance laminated closed cell

polythene foam joint filler in sheet foam

as directed, etc. complete.

12 Providing form work in ordinary timber

planking so as to give a rough finish

including centering, shuttering, strutting

and propping etc. height of propping and

centering below supporting floor to

celling not exceeding 4 M & removal of

the same for in situ reinforced or plain

concrete work in

a 474.00 (A) Foundation, footings, bases of

columns etc. and mass concrete. 171.68 Smt

b 1055.00 (B) Flat surface such as soffits of slabs,

landing and the like 252 Smt

c 618.00 (C) Vertical surfaces such as walls (any

thickness) partitions. 229.95 Smt

(D) Columns, pillars, posts & struts.

d 1577.00 (1) Square, rectangular, polygonal in

plan 297.68 Smt

e 10.00 (2) Circular or curved in plan. 422.1 Smt

f 1636.00 (H) (1) Sides and soffits of beam,

haunchings cantilevers, girders,

bressumers, Coping and lintels not

exceeding 1 M in depth.

g 10.00 (2) Sides and soffits of beam,

haunchings cantilevers, girders,

bressumers and lintels exceeding 1 M in

h 48.00 (L) chullah hoops, weather sheds,

chhajas, carbels etc including edges. 155.78 Smt

i 90.00 (M) Staircase with-sloping or stepped

soffits incl. risers & strings excluding

landing. 242.55 Smt

j 60.00 Extra for additional height of propping

and centering where the height of

propping and centering exceeds 4 .O M

between supporting floor to ceiling

including temporary brick or stone pillars

for supporting as required. (i)Height

more than 4.0 M.and upto 5.0 M.

13 Providing T.M.T Fe 500D bar

reinforcement for R.C.C. work including

bending, binding and placing in position

complete up to any floor level..

a 100650.0 All Floor Level 75.46 Kg.

14 35.00 Providing and laying polished Kota stone

slab (Polished / River Finish, Green

colour ) flooring over 20 mm. (average)

thick base of cement mortar 1:6 (1

cement : 6 coarse sand) or lime mortar

1:1.5 laid over and joined with grey

cement slurry including rubbing and

polishing complete.25 mm th.

15 70.00 Providing and laying polished Kota stone

slab 25 mm. thick in Platform ,Riser of

Stair , Skirting, Tread , dado and pillars

laid on 10 mm. thick cement mortar 1:3

(1 cement : 3 coarse sand) jointed with

grey cement slurry including rubbing and

polishing and MAking groove where it is

Required etc. compl

16 5.00 Providing and laying white/Colur glazed

tiles 6 mm thick in flooring treads of

steps and landing laid on a bed of

mm thick cement mortar 1:3 (1 cement :

3 coarse sand) finished with flush

pointing in white cement.

17 512.00 Providing and layingWhite / Colour

glazed tiles of size 600 mmx300mm x

mm / 300 mmx 450mm x 8 mm in

skirting, risers of steps, Floor and dedo

on 10 mm. thick cement plaster 1:3 (1

cement : 3 coarse sand) and jointed with

white cement slurry.

18 2.00 Providing and laying marble stone slab

flooring over 20 mm. (Average) base of

cement mortar 1:6 (1 cement: 6 coarse

sand) or L.M. 1:1.5 laid and jointed with

grey cement slurry including rubbing and

polishing complete: (A) Marble slab

19 980.0 Providing and laying Vitrified tiles 8 to

mm thick , 24'' x 24'' in flooring treads of

steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-

coarse sand) finishing with flush pointing

in white cement.

19b 1230.0 Providing and laying Vitrified tiles 8 to

mm thick , 24'' x 24'' in skrting risers of

steps and dedo on 10mm thick cement

plaster 1:3 (1cement : 3-coarse sand)

and jointed with white cement slurry

20 95.0 Providing and laying Ceramics tiles 6 to

8 mm thick in flooring, treads of steps,

landing and dedo on 12 mm. thick

cement plaster 1:3 (1 cement : 3 coarse

sand) and jointed with white cement

21 600.00 Providing & Laying 18 mm thick Mirror

polish granite For flooring , counter , stair

riser , tread , skirting , dedo , Jambs

Seating etc. machine cut or chiselled on

bed of cement mortar 1:1 pointing with

neat cement slurry incl. moulding,

Making grooves where it is required etc.

comp. as per instruction of engineer in

charge. 2385.71 Sq. M.

22a Provdg. 20 mm. thick Finish / Mala

cement plaster in single coat on fair side

of brick / concrete walls for interior

plastering upto any Floor level and

finished even and smooth in C.M.1:4.

i 1393.00 All Floor Level 190.58 Sq.M.

b Provdg. 20 mm. thick Finish / Mala

cement plaster in single coat plastering

on ceilings, Beam side and sofits of

stairs upto any Floor level and finished

even and smooth in C.M.1:4.

i 1180.00 All Floor Level 215.15 Sq.M.

c 253.00 Providing & fixing 23 cm wide chicken

mesh jali with nails & then application of

15 mm plaster on R.C.C. & masonary

joints as per dir. of engg. In charge.

d 170.00 Providing and mixing water proofing

materials in cement mortar in proportion

recommended by the manufacturer. etc.

comp. as per instruction of engineer in Per Bag

charge. of 50 Kg

23a 1391.00 Providing 20 mm th. Double coat Sand

face / Mala Cement Plaster on Walls

upto any Height Above Ground level

consisting of 12 mm th. Backing coat of

C.M. 1:3 ( 1 cement : 3 Ssand ) & 8 mm

th. Finishing coat of C.M. 1:1 ( 1 cement

: 1 sand ) ets. Complete.

24a 20.00 White / Color washing with lime on

undecorated wall surfaces (two coats) to

give an even shade including thoroughly

brooming the surface to remove all dirt,

dust mortar drops and other foreign

24b 1125.00 Providing & Applying 3 mm thick

External Wall Rustic Type Texture as

per Design & Make as Approved by

Consultants / Engineer in Charge. Work

Includes All Necessary Scaffolding Work

upto Any Height.

24 c 1391.00 Finishing walls with Acrylic Smooth

exterior paint of required shade :New

work (Two or more coat applied @

ltr/10 sqm over and including priming

coat of exterior primer applied @

24d 10.00 P./L. METALIC HERITAGE SURFACE

Providing and fixing of HERITAGE

textured homogeneous wall finishing

system from BAKELITE HYLAM LTD or

equivalent make consisting of a two

component system of (25 kgs per Pack)

made of 92% silica particles coated with

fade resistant pigments, 100% acrylic

polymer bonding agent (5kgs per pack)

with the applied thickness of the coating

being between 0.8mm-1.2mm to be

applied on acured, smooth level plaster

without keying, as per the

shades/combinations approved, as per

the manufacturer directions, for usages,

tobe applied by an approved applicator

of the manufacturer, as per the directions

/ supervision of the engineers in charge,

all complete. Includes All Necessary

Scaffolding Work upto Any Height.

24e 9.00 Painting the illustration circle of Diameter

44 inch with weather proof exterior

emulsion acrylic based paint as per

defined shade code by experienced

applicator of standard drawing and

design according to the reference

manual of Facade Branding for Health &

Wellness Centres of Ayushman Bharat

Scheme as per the direction of the

Engineer in Charge.

25a 2580.00 Wall Painting (two coats) with plastic

emulsion / Oil paint of approved brand

and manufacture and of shade required

on undecorated wall surfaces to give an

even shade, over and including a priming

coat with alkali resistance primer of

approved brand and manufacture after

thoroughly brushing the surface free

from mortar droppings, and other foreign

matter and also including preparing the

surface even and sand -papered smooth

b 2580.00 Extra over above item for every

subsequent coat of of wall painting with

plastic emulsion / Oil paint of approved

c 2580.00 Applying two coats of Birla (white cement

based) or Asian (acrylic lapy-putty) or

equivalent & two coats of primer of

approved brand and manufacture on

new wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other

foreign matter and sand papered

26 Providing and supplying ISI marked only

standard length Stonewate pipes in standard

lengths of following class and diameter

including all taxes,insurance, transportiton,

fright charges, octroi,inspection charges,

loading,unloading, conveyance to

departmental stores, stacking etc. complete

a 70.00 23 cm dia. 299 Rmt

Lowering, laying and jointing stone ware

pipes of following diameters with cement

joints in C.M.1:1 proportion in proper position

, grade and alignment at all level as directed

by Engineer-in- charge including conveyance

from stone to site of work, Jointing material

b 70.00 23 cm dia. 128 Rmt

Providing & Laying & Jointing glazed

stoneware pipes incl. excavation up to

2.0 mt.,refilling, trasporting the pipe to

work site, unloading, lowering in

trenches, laying and jointing the pipes in

c.m. 1:1 incl. all jointing materials such

as cement, sand, hemp, bitumen as dire.

testing the pipe line to a head of 1.5 mt.

and hydraulic test as dire incl. watering

trenches, spreading , and carting away

of surplus earth within 100 mt.lead as

dire. etc. comp.

b 15.00 10 cm dia 288.23 Rmt

c 15.00 15 cm dia. 211.05 Rmt

27 8.00 Constructing brick masonry chamber for

under ground C.I. Inspection chamber

and bends with bricks having croshing

strength not less than 35 Kg. Cm2 in

C.M. 1:5 C.I. cover with frame (Lightduty)

455mm x 610 mm intenal dimensions

total weight of cover with frame to be not

less than 38 Kg. (Wt. of cover 23Kg.)

and Wt. of frame 15Kg.) (R.C.C.top slab

with 1:2:4 mix (1-cement:2-coarse

sand:4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside

plaster 15 mm thick with cement mortar

1:3 finished smooth with a floating coat

of neat cement on walls and bed

concrete etc. complete.(i) Inside

dimensions 455 mm x 610 mm and up to

28 a 3.00 Constructing Manhole with R.C.C. top

slab in 1:2:4mix (1-cement: 2-coarse

sand:4-graded stone aggregate 20 mm

nominal size) foundation concrete 1:3:6

mix (1-cement:3-coarse sand:6-Brick

bats 40+50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-

Cement:5-coarse sand) finished with a

floating coat of neat cement and making

channels in cement concrete 1:2:4 mix

(1-Cement:2 -Coarse sand:4-stone

aggregate 20 mm nominal size) finished

smooth complete including curing and

festing (i) Inside size 900mm x 1200mm

and up to 1.5M. deep including C.I. cover

with frame size 560 mm diameter total

weight of cover and frame to be not less

than 128kgs. (Wt. of cover 64Kg. and

Wt. of frame 64Kg.) (A) With 230 mm

thick walls of brick masonry using brick

having crushing strength not less than

35Kg./Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2)B type depth

up to 1.50 Metre

Providing and fixing white vitreous china flat

back or wall corner type lipped front urinal

basin of 340x280x470 mm sizes

respectively with standard flush pipe, Waster

Pipe, Waste Coupling, PVc Connection and

G.I clamps complete, including painting of

fittings and brackets, cutting and making

good the walls and floors wherever required :

Cera Model No. S4020103 or Equivalent 3344.35 No.

b 15.00 Providing and Fixing of C.P. Brass BIB

Cock of 15 mm Dia of Jaquar make

florentine series model no. 5047n or

equivalent make with all necessary

fittings. as approved by Engineer - in -

c 25.00 Providing and fixing brass screw down

Angle stop tap.(A) 15mm dia. Of Jaquar

make florentine series modelno. 5053n

or equivalent make with all necessary

fittings. as approved by Engineer - in -

d 2.00 Providing and fixing C.P. brass shower

rose with 15mm or 20mm inlet Shower

Arm.(A) 100mm dia. Each

Provding and Fixing of autoclosing

pressmatic pillar cock / bib cock with all

necessary fittings of Polished Bright

Chrome Finish of Jaquar make model

no. 031L65 or equivalent make as

approved by Engineer in Charge. Rate

including of cost of labour, material etc.

in complete manner. 3280.52 No.

Providing and Fixing of C.P. Brass Two

Way Bib Cock of 15 mm Dia of Jaquar

make model no. 041kn or equivalent

make approved make with all necessary

fittings. as approved by Engineer - in -

charge., 1411.58 No.

Providing and Fixing of C.P. Brass urinal

Valve Auto Closing System With Full

Built in Control Cock & Wall Flange of

mm Dia of Jaquar make model no.

or equivalent make approved make with

all necessary fittings. as approved by

Engineer - in - charge., 2568.08 No.

Providing and Fixing of C.P. Brass Pillar

Cock Auto Closing System with Elbow

Operated Extended Lever of 15 mm Dia

of Jaquar Make Model No,031 MED or

Equvalent Make with all necessary

fittings. as approved by Engineer - in -

charge., 3723.48 No.

30 11.00 Provdg. & laying S.W. Gully trap with C.I.

garting brick masonry chamber & water

tight C.I. cover with frame of 300 mm x

300 mm size ( inside) with standard

weight. sqare mouth trap size 150 x100

31 2000.00 Providing erecting and fixing double

coated ISI water tank of required

capacity each with all necessary fittings

and connection etc. complete on terrace

32 20.00 Extra rate over item of excavation of

earth for excavation of asphalt

pavement/RCC of thickness up to

meter including demolishing the asphalt

carpet, metal, soiling / cutting

Reinforcement etc.comp. with stacking

the material as directed.-up to

meter thickness

33 28.00 P/F PVC / C.I. (span) nahni trap and all

of the following nominal dia of self

cleanising design with C.I.Screw down or

hinged greeting inclusive cost of cutting

and making good the walls and floors for

drain 75 mm dia. etc. comp.

34a Provdg. And fixing to wall, ceiling & floor

in true line and level UPVC pipe

Schedule- 40 of make as approved by

engg. incharge. pipe shall be fix on wall

with the help of clamp at every twi meter

center to center of shall be concealed as

directed in cluding neccesarry fitting etc.

in cluding testing of pipe and jointd and

fixing the same with adhesive solvent

including cost of all materials of

following nominal bore

iii 10.00 32 mm 117.97 Rmt

34b Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water

of following dia. nominal bore tube

fittings and clamps including making

good the wall, ceiling and floor etc.

iii 10.00 25 mm 247.25 Rmt

35 Provdg. And fixing to wall ,ceiling and

floor 10.00 kg. F/Sq.Cm2 working

pressure polythelene pipes of the

following outside diameter, low, density,

complete with special flange

compression type fittings, wall clips etc.

making good wall ceiling and floor.

b 45.00 75mm dia 274.68 Rmt

c 125.00 110 mm dia 332.91 Rmt

36 4.00 Providing and fixing water closet

squatting Pan ( Indian type W.C. Pan)

size 580mm (A)VitreousChina. (I)Long

pattern = White colour with Trap and Pair

37a 7.00 Providing and fixing white vitreous china

extended wall mounting water closet of

Cera Make S1043101 Carat Model Or

Equivalent Model With EWC Soft Close

Seat Cover, Chair Bracket, nuts, bolts

and gasket etc complete.

b 11.00 Providing and Fixing of C.P. Brass Flush

Cock of 25 mm Dia of Jaquar make model

no. 081 or equivalent and Outer Body of

Jaquar make model no. 5083KPM or

equivalent approved make with all necessary

fittings. as approved by Engineer - in -

c 7.00 Providing and fixing Health Faucet of Jaquar

make model no. 573 oe equivalent make as

approved by engg. In charge with flexible

tube upto 1 metre long etc. complete. 1543.36 No.

38a 2.00 Providing and fixing 24"x18"x8" Carysil

Elegance or Equivalent Make of Single Bowl

Sink S.S. Matt Finish With Waste Coupling,

Waste Pipe,etc. cutting and making good the

walls wherever required.

b 10.00 Providing and fixing Under counter Wash

basine including 15 mm C.P. Brass Pillar tap,

32 mm C.P. Brass Waste of Standard make,

Cutting & Making good the wall / granite

Wherever Required in White Color : Model

S2030101 of Cera Clair Series or Equivalent

make Waash basine of size : 520x450 mm

c 8.00 Providing and fixing Wall Hung wash

basin Including 32 mm C.P. brass waste

of standard pattern, Include All

Accessaries, cutting and making good

the walls / granite wherever require:In

White Color : Cera Cadal Or Equivalent

Make Wash basin of size 515 x 410 mm

d 2.00 Providing and fixing Kitchen sink with C.I. or No.

M.S. brackets, painted white including cutting

holes in walls and making good the same but

excluding fittings. (C) Vitreous China Sink.(i)

600mm x 450mm x 150mm size

e 2.00 Providing and fixing C.P.brass waste for 67.24 No.

wash basin or sink. (A) 32mm dia.

f 2.00 Providing and fixing M.I. fisher union for 77.97 No.

wash basin or sink. (A) 32mm dia.

39a 6.00 Provdg. & fixing 600mm x 450 mm

Bevelled edge mirror of superior glass

mounted of .6 mm th. A.C. sheet or

plywood sheet and fixed to wooden

pluge with C.P. brass screws and

washers. 825.48 No.

40 4.00 Provdg. & fixing C.P..Brass towal rail

complete with C.P. brass brackets fixed

to wooden plugs with C.P. Brass

screws.(600 mmx 20 mm size)

41 Providing and fixing ball valve (brass) of

approved quality, High or low pressure,

with plastic floats complete :

ii 1.00 20 mm dia 1099.94 No.

iii 12.00 25 mm dia 1552.93 No.

iv 1.00 40 mm dia 3312.60 No.

42a Providing and fixing Full Way valve

(HEX) with wheel of approved quality :

i 2.00 15 mm Full Way valve (HEX) 1461.17 No.

ii 1.00 20 mm Full Way valve (HEX) 1924.61 No.

iii 10.00 25 mm Full Way valve (HEX) 2535.55 No.

iv 1.00 32 mm Full Way valve (HEX) 3377.64 No.

v 5.00 40 mm Full Way valve (HEX) 4661.10 No.

vi 2.00 50 mm Full Way valve (HEX) 6675.14 No.

Providing and Fixing of C.P.Brass Pillar

Cock of 15 mm Dia of Jaquar make

model no. 5011n or equivalent make with

all necessary fittings. as approved by

Engineer - in - charge., 1725.21 No.

b 4.00 Providing and Fixing of swan neck Sink

Tap Wall mount/Plateform Mount Jaquar

make model no. 5357n or equivalent

make. Rate shall Including of cost of

labour, material, necessary fittings etc.

Providing fixing of SS grab bar of Jaquar

make model no. 1507 or equivalent

make with all hardwares for Physically

Handicap toilet. 1937.24 No.

44a 345.00 Providing and laying integral cement

based water proofing treatment including

preparation of surface as required for

treatment of roofs, balconies, terraces

etc consisting of following operations:

(a) Applying a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed

with water proofing compound

conforming to IS. 2645 and approved by

Engineer-in-charge over the RCC slab

including adjoining walls upto 300 mm

height including cleaning the surface

before treatment.

(b) Laying brick bats with mortar using

broken bricks/brick bats 25 mm to

mm size with 50% of cement mortar 1:5

(1 cement : 5 coarse sand) admixed with

water proofing compound conforming to

IS : 2645 and approved by Engineer-in-

charge over 20 mm thick layer of cement

mortar of mix 1:5 (1 cement :5 coarse

sand ) admixed with water proofing

compound conforming to IS : 2645 and

approved by Engineer-in-charge to

required slope and treating similarly the

adjoining walls upto 300 mm height

including rounding of junctions of walls

(c) After two days of proper curing

applying a second coat of cement slurry

using 2.75 kg/ sqm of cement admixed

with water proofing compound

conforming to IS : 2645 and approved by

Engineerin- charge.

(d) Finishing the surface with 20 mm

thick jointless cement mortar of mix 1:4

(1 cement :4 coarse sand) admixed with

water proofing compound conforming to

IS : 2645 and approved by Engineerin-

(e) The whole terrace so finished shall

be flooded with water for a minimum

period of two weeks for curing and for

final test.“All above operations to be

done in order and as directed and

specified by the Engineer-in-Charge :and

shall be guaranteed for minimum period

of 10 years after handing over the

completed building by the main

contractor to be finished as directed.

Stamp paper guarantee 10 years to be

furnished before receiving any payment

from the client.

With average thickness of 120 mm and

minimum thickness at khurra as 65 mm.

b 345.00 Providing and laying broken chine

mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to

be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar

creme out upto surface using white

cement including rounding off junctions

and extending them upto 15 cm along

the wall,clearing with water and oxalic

acid etc. as directed.

Providing and applying fibre reinforced

elastomeric liquid water proofing

membrane with resilient acrylic polymers

having Sun Reflectivity Index (SRI) of

105 on top of concrete roof in three coats

@10.76 litre/ 10 sqm. One coat of self-

priming of elastomeric waterproofing

liquid (dilution with water in the ratio of

3:1) and two coats of undiluted

elastomeric waterproofing liquid (dry film

thickness of complete application/system

not less than 500 microns). The

operation shall be carried out after

scrapping and properly cleaning the

surface to remove loose particles with

wire brushes, complete in all respect as

per the direction of Engineer-in-Charge. 562.4 Sq. M.

d 12.00 Filling in Sunken Portion with good

Quality Aerated light weight concrete

block having crushing strength not less

than 35 kg/sqcm and where directed by

the Architect / Engineer-in-charge, in

sunk in layer. including watering,

ramming where it is required etc.

complete, as directed by the Architect /

Engineer-in-charge .

45 100.00 Providing and laying cement concrete

flooring ( I.P.S.) 1:2:4 (1-cement : 2-coarse

sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished

with a floating coat of neat cement. (B)

50mm thick. 348.08 Sq.M.

46a 6000.00 Providing & Fixing M.S.grill, gate,stair /

balcony railing , elevation element of

Decorative pattern with M.S. Channel

,flat ,medium grade m.s. pipe, square or

round bars with round heanded bolts,

nuts, or by screw. etc. comp.

b 280.00 Applying priming coat over new steel and

other metel surface after and including

preparing the surface by throughly

cleaning, oil, grease, dirt and other

foreign matter and scoured with brushes

fine steel wood, scrapers and sand

paper with ready mixed priming paint

brushing red lead.

c 280.00 Painting two coats (excluding priming

coat) on new steel and other metal

surface with enamel paint, brushing,

interior to give an even shade including

cleaning the surface an even shade

including cleaning the surface of all dirt,

dust and other foreign matter.

Providing & Fixing 1 mm Thick S.S.-304

Grade 90 cm High S.S. Railing having

Hand Rail Member of 50 mm Dia., 3 No.

of Horizontal Pipe of 16 mm Dia. &

Baluster Suppprt of 40 mm Dia. At Every

Third Step as per Detail Given. Rate

Includes All Work Complete as per

Description & as per Direction of Engg.

in Charge. 2270.21 R.Mtr.

47a 27.0 Providing and fixing in position

collapsible steel shutters with vertical

channels 20x10x2 mm braced with flat

iron diagonals 20x5 mm size with top &

bottom rails of T-iron 40x40x6 mm with

38 mm dia. Steel pulleys complete with

bolts , nuts , locking arrangement

stoppers , handles including applying a

priming coat of red lead paint.

b 5.00 Providing corrugated 0.80 mm (22

gauge) thick G.I. sheets roofing fixed

with galvanized iron ‘J’ or ‘L’ hook bolts,

and nuts 8 mm. dia with bitumen and G.I.

limpet washers filled with white lead

complete excluding the cost of purlines,

rafters and trusses.

c 3.00 Providing valleys 900 mm. overall in

plain 1.6 mm. thick G.I. sheet Class –

fixed with ‘J’ or ‘L’ hook bolts and nuts

galvanized from ‘J’ or ‘L’ hook bolts and

bitumen washers complete.

48 9.0 Providing and fixing rolling shutters of

approved make made of 80 mm wide

M.S. laths inter-locked together through

their entire length and jointed together at

the ends by end locks mounted on

specially designed pipe shaft with

bracket plates, guide channels and

arragements for inside and outside

locking with push-pull operation including

the cost of hood cover and spring etc.

complete.(B) Shutters having width

49a 10.00 Providing and fixing 27mm domal Series

- 1.2 mm Th. Alluminium Section Two

track Sliding window With Metalic

Powder Coating and 4 MM Clear

Glaas(Non Tuffen) Include All

Accessaries and Fixture etc. complete as

per the direction of Engineer-in-charge.

49b 85.00 Providing and fixing 27mm domal Series

- 1.2 mm Th. Alluminium Section Three

track Sliding window With Metalic

Powder Coating and 4 MM Clear

Glaas(Non Tuffen) Include All

Accessaries and Fixture etc. complete as

per the direction of Engineer-in-charge.

50 16.00 ALUMINIUM DOOR WORK

Providing and fixing Aluminium Door

work (Single Shutter OR Double Shutter

with or without fix glass) made from

Jindal or equivalent make Powder

Coated (50 micron pure polyester

coating ) ,aluminium section frame built

up standard tubular and other section of

approved make confirming to IS 733 and

IS 1285 , member size with shutters of

horizontal member , vertical member

Confirming to IS733 and IS 1285 fixed

with rawl plug abd screws or fixing clips

or with expansion hold fasteners

including necessary filling up of gaps at

junctions at top bottom and sides with

required PVC/ Neoprene felt, 8/12 mm

toughened glass of approved make etc.

Aluminum sections shall be smooth, rust

free, straight.mitred and jointed

mechanically wherever required

including Door Hardware such as cleat

angles aluminum snap beading for

glazing /paneling, CP Brass/ Stainless

steel screws, Stoppers, heavy duty floor

hing, S.S. Hinges, aldrop , Locking

system, heavy duty Floor Springs, Pivot

and fixtures and transparent silicon

sealant glass fixing to frame as per

details all complete as per architectural

drawings and the direction of Engineer in

Charge. rate incl. all type of alumnium

sections for doors as per the detail

Architectural dwg. 5401.70 Sq. M.

51a 6.00 Providing and fixing standared extruded

of alluminium section of size 63 mm x

38.10 mm x 1.2mm (Section:2434, @

Wt.0.643Kg/mt ) with colour anodized

alluminium frame for ventilation with

mm thick Frosted glass as details etc

complete for Ventilation

51b 5.00 Providing and fixing standared extruded

of alluminium section of size 63.50 x

38.10 x 1.95 mm ( Section no:

@Wt 1.094 Kg / Rmt with colour

anodized alluminium frame with 5 mm

thick transparent bronze colour tinted

float glass as details etc complete for Fix

51c 80.00 Providing Fixing 1.2 mm thick Alluminium

Section Partition -Fully Glazed / Partly

Panelled Partly Glazed / Fully Panelled

Having Size of Section of 2.1/2 x 1.1/2

with 4 mm Compact Sheet / 5 mm thick

Glass Fixing with 4 mm thick EPDM

Rubber etc. Complete as per Direction of

Consultant / Engg.incharge.

3124.44 Sq.mtr.

51d 8.00 Providing Fixing 1.2 mm thick Alluminium

Section Partition Door -Fully Glazed /

Partly Panelled Partly Glazed / Fully

Panelled , frame Having Size of Section

of 2 .1/2 x 1 .1/2 and Door Section

Having Size of Tips Vertical 1 .3/4 x

.3/4, Top Rail 4 x 1 .3/4, Middle Rail

.3/4 x 1 .3/4, Bottom rail 4 x 1 .3/4 with

4 mm Compact Sheet / 5 mm thick Glass

Fixing with 4 mm thick EPDM Rubber

Including Lock, Handle, Door Closer,

Door Stoper, Stopper etc Complete as

per Direction of Consultant /

4061.77 Sq.mtr.

Providing and fixing ISI marked 32 mm

thick flush door shutters conforming to IS

: 2202 (Part I) decorative type, core of

block board construction with frame of

1st class hard wood and well matched

teak 3 ply veneering with vertical grains

or cross bands and face veneers on both

faces of shutters with 1.00 mm thick

Decorative Laminated Sheet on both

faces of shutters including ISI marked

Stainless Steel butt hinges, bright /matt

finished 125 mm Stainless Steel handles

of approved quality & make, ISI marked

oxidised M.S. door latches / Aldrop of

Size 300x20x6 mm conforming to

IS:5930 with necessary screws etc.

complete as per direction of Engg.

a 73.00 Flush shutter with both side laminate 4332.15 Sq.M.

b 136.00 Providing wood work in frames of Doors,

windows cleare story windows and

othersimilar works wrought, framede and

fixed in position. (A) Indian Teak Wood 602.04 Cu.Decim

53 Providing and fixing 35 mm th. Shutters

for doors windows & clearstory windows

incl. wood frames as specified 12 cm. x

7cm. size incl. anodised alluminium

fixtures and fastenings including primer

coat of approved quality and two coats of

oil paint etc. complete.

a 3.00 Fully glazed 4788.50 Sq. M.

b 3.00 Fully panelled 5478.89 Sq. M.

c 3.00 Partly panelled and partly glazed 5133.69 Sq. M.

54 15.00 Providing and fixing FRP frame size

100x50 mm and 28mm thick FRP

depress panel shutter having extra

reinforcement on sides & edges in Gel

coat finish. The core of the shutter &

frame is to be filed up with injected fire

retardant grade polyurethene foam done

in situ alongwith embedded wooden

pieces for stiffening & also taking hinges

& fintures. The whole FRP frame &

shutter is to be water proof weather

proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of

S.S hinges with necessary screws &

alluminium fixtures & fastenings &

fastener sleeve.

55 Making connection to the ex.M.H.in

running sewer incl. Dewatering and other

required machinery etc. of following dia

pipes at any convenient time. All

damaged work shall be well repaired as

per instructions. etc..complete.

a 1.00 For Pipe 150 mm to 300 mm diameter 1339.29 No.

b 1.00 For Pipe 400 mm to 600 mm diameter 2232.14 No.

56 1.00 Making connection of galvanised Mild

steel distribution branch with galvanised

mild steel main pipe upto 80mm nominal

bore by providing and fixing tee including

cutting and threading the pipes complete

57a 550.00 Providing throating or plaster drip,

grooves and moulding to Wall , R.C.C.

chajja and slab.

57b 80.00 Providing & Laying cement vatta 10 cm x

10 cm in size quarter round in c.m. 1:1 (

1 cement, 1 coarse sand) laid in one

layers finishing with a floating of neat

cement watering etc complete as dire.

58 350.00 Carring out plinth treat ment to post

construction/ existing structure by

spraying chemical solution for termite

control treatment including labour and

material consist ment withI.S.I

specification. Using Chlordene and

Chiorpur files 20EC. As Per 6131_ paret-

II Consentration Weight one percent is

recommended i.e one litre 20EC

chemical emulsion with19 liter give1%

concrentration inclusive of one litre

chemical emulsion appication at the rate

of 5 Litre chemical/ Sqm of surface is

recommended as per I.S

59 10.00 Carring out timber treatment to all wood

work including drilling holes and spraying

oil based chemical solution on surface of

timber work for termite control including

labour and material etc. complete. Using

Chlordene 20EC. As Per 6113_part III

Consentration Weight 1.00 percent is

recommended one litre chemical

emulsion dillute with 9 liter of kerosene

precent concentration. Total dillute

concrentration will be10litre inclusive of

the litre chemical emulsion application

0.75/Litre chemical per one Sqmt printed

two coat wood surface.

60 120.00 Paver Block Providing and laying shot

blasted Non - interlocking, Paver blocks of

specified thickness, size, grade of concrete

and colour machine made and blasting by

automatic shot blasting machine and high

density of as per approved sample of

approved make for footpath, parking areas,

service lanes,cross over and other areas as

mentioned in the drawing. Including providing

and laying 50 mm thick averave bedding

layer of coarse sand below paver block as

per required grading and specification. Laid

paver block shall be mechanically

compacted. The work of the paving blocks

shall be executed in line and level by skilled

mason of flooring work only. Small size of

paver block with same specification shall be

used at residue or at end. It should be laid in

such a way that the no cutting of the paver

block to be necessary. If cutting of paver

block shall be required , than cut by machine

only and laying to be done by skilled flooring

mason. The finished surface of the paver

block shall have coarse sand Texture Finish.

Pave blocks shall be compacted and shall be

re-laid if necessary. Actual laid area shall be

measured and paid without any wastage. (A)

80 mm thick M-35 grade Grey Paver block of

size 200mm x 200mm. As per approved rate

61 180.00 SProviding and fixing pre-cast concrete

kerb stone of gray cement based

concrete block 30cm length,30cm height

and 15cm thick of M250 grade concret

as per approved design and including

excavation for fixing in proper line and

level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and fixing double action

hydraulic floor spring of approved brand

and manufacture conforming to IS :

6315, having brand logo embossed on

the body / plate with double spring

mechanism and door weight upto

kg, for doors, including cost of cutting

floors, embedding in floors as required

and making good the same matching to

the existing floor finishing and cover

plates with brass pivot and single piece

M.S. sheet outer box with slide plate etc.

complete as per the direction of

Engineer-in-charge. With stainless steel

cover plate minimum 1.25 mm thickness 4558.89 No.

Providing and fixing aluminium extruded

section body tubular type universal

hydraulic door closer (having brand logo

with ISi, IS : 3564, embossed on the

body, door weight upto 36 kg to 80 kg

and door width from 701 mm to

mm), with double speed adjustment with

necessary accessories and screws etc.

complete. 1626.10 No.

63a 35.00 Designing, fabricating, testing, installing

and fixing in position Curtain Wall with

Aluminium Composite Panel Cladding,

with open grooves for linear as well as

curvilinear portions of the building , for all

heights and all levels etc. including:

(a) Structural analysis & design and

preparation of shop drawings for

pressure equalisation or rain screen

principle as required, proper drainage of

water to make it watertight including

checking of all the structural and

functional design.

(b) Providing, fabricating and supplying

and fixing panels of aluminium

composite panel cladding in pan shape

in metalic colour of approved shades

made out of 4mm thick aluminium

composite panel material consisting of

3mm thick FR grade mineral core

sandwiched between two Aluminium

sheets (each 0.5mm thick). The

aluminium composite panel cladding

sheet shall be coil coated, with Kynar

500 based PVDF / Lumiflon based

fluoropolymer resin coating of approved

colour andshade on face # 1 and

polymer (Service) coating on face # 2 as

specified using stainless steel screws,

nuts, bolts, washers, cleats, weather

silicone sealant, backer rods etc.

(c) The fastening brackets of Aluminium

alloy 6005 T5 / MS with Hot Dip

Galvanised with serrations and serrated

washers to arrest the wind load

movement, fasteners, SS 316 Pins and

anchor bolts of approved make in SS

316, Nylon separators to prevent bi-

metallic contacts all complete required to

perform as per specification and drawing

The item includes cost of all material &

labour component, the cost of all mock

ups at site, cost of all samples of the

individual components for testing in an

approved laboratory, field tests on the

assembled working curtain wall with

aluminium composite panel cladding,

cleaning and protection of the curtain

wall with aluminium composite panel

cladding till the handing over of the

building for occupation. Base frame work

cost for ACP cladding is included in this

item rate. The Contractor shall provide

curtain wall with aluminium composite

panel cladding, having all the

performance characteristics all complete

, as per the Architectural drawings, as

per item description, as specified, as per

the approved shop drawings and as

directed by the Engineer-in-Charge.

However, for the purpose of payment,

only the actual area on the external face

of the curtain wall with Aluminum

Composite Panel Cladding (including

width of groove) shall be measured in

sqm. up to two decimal places.

b 24.00 Providing and fixing Structural Glazing

with using the 17 Micron anodised of

approved colour alluminium section as

transium, mullium of size 63mm x 38mm

x 2 mm with using 6 mm thick reflective

structural glass of approved make,

colour / Tinted, toughned and shade and

fixed with silicone sealant and spacer tap

and at corner sealed neoprene foam

dust and Air sealed gasket mirred

including scaffolding, cleaning of glass

etc.complete at all heights anf lifts with

all necessary fitting and fixtures, anchore

fasteners, necessary M.S. or Aluminium

brackets, suitable design for openable or

sliding window as per Architectural

drawing and as directed by Engineer-in-

charge. Grooves between the glasses to

be filled with sealant of Dow corning -

structural sealant 995, weather sealant

789. The entire facade should be water

proof. The mullions are to be connected

to bracket by SS-304 nut bolts.

Measurement shall be given as per

actual execution of the work. (Rate are

included providing & fixing of MS

structure steel work wherever Required)

Providing and Fixing Box type metal

letters forming composite box made from

1mm thick stainless steel plate of grade

304 having brush finish of following font

size to be fixed at Main Gate in english

and or Gujrati and including fixing

charges. etc. complete as per direction

of Engg. incharge. for Payment Purpose

Height of Letter will be measured.

a 960.00 Upto 300 mm Height 93.85 R. Inch

Providing and Fixing MURAL made out

of 2mm thick s.s. plate grade

including making necessary design as

per Architect dwg. Through laser cutting

including connection to the

R.C.C./Masonary with necessary

frame,anchor fastnuts,M.S.Plate etc.

complete as per direction of Engg.

incharge. 6804.07 Sq.mt.

65b 4500.00 Providing and Fixing Sinage - internal

and external signage boards with Vinyle

Text on ACP sheet / 2 mm th. S.S. Plate

etc. complete as per direction of Engg.

65c 5.00 Providing and fixing retro Reflective Hi

Intensity Micro Prismatic Grade Board

using 2mm Aluminum / 4mm ACP, angle

iron 75 x 75 x 6mm. Descaling and

degreasing the board as per requirement

using epoxy reflactive process by screen

painting as directed etc. complete

including transporting and fixing in C.C.

1:2:4 with necessary excavation curing

etc. complete as per I.R.C. 67-2012

design. A warranty for 7 years for the

Retro reflective sheeting from original

manufacturer & a certified copy of 3 year

outdoor exposure test report from third

party test lab for the product offered shall

be submitted by contractor. (B)Class B

Type-4(MDR/ODR) retro reflective

7535.31 Sq.mtr.

65d 50.00 Road marking with hot applied

thermoplastic paints with reflectorising

glass beads on bitumin surface providing

and laying a hot applied thermoplastic

compound 2.5 mm thick including

reflectorising glass beads @ 250gms per

sqm area, thickness of 2.5mm is

excluding of surface applied glass beds

as per IRC:35-2015. The finished

surface to be level, uniform and free from

streaks and holes. zebra patta /bump

patta lane/center line/ edge line/cut

patta. The white color marking should

provide liminance coefficinet on cemend

road shalll be min 130 mcd/m2/lux and

Asphalt road shall be min

mcd/m2/lux during the service life during

the day time. The marking should meet

the performance criteria for night time

reflectivity, wet reflectivity and skid

resistance as mentioned in the section-

15 of IRC 352015. Warranty for the

Retro reflectivity should be two years.

65e 5.00 CAT EYE/Pavement Marker(MNC two

nail) made out of acrylic

StreneAcrylonitrile or hi-impact poly

Steren fitted with moulded of

metheacrylate(MNC)reflector cube

corner reflector design,filled with tightly

adhering pooting compound as per

ASTMD-788 size 11.5x7x1.60 cms or

10x10x1.75 cms provided with

bituminous adhesive in sufficient quantity

with each unit fixing with two shrank

.Reflector on both side.Co efficient of

lumination as per specification and

compressive strenth 13 tones at

degree centigrade etc.B) Double side

66a 35.00 Providing and fixing eco-friendly light

weight calcium silicate false ceiling tiles

having T egular edge & 15mm Thick

Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium

silicate ceiling tiles shall have, light

reflection 85% non-combustible as per

B.S.476 part IV, 100% humidity

resistance and also having thermal

conductivity 0.043° w/m KC. for the best

thermal Insulation.

The Light weight calcium Silicate tile

shall be of approved texture Fine

fissured/ Spintone/ Cosmos having NRC

value of 0.5 & Globe having NRC value

of 0.75 NRC or equivalent of size

595X595 mm to be laid on true

horizontal level suspended inter locking

metal grid of hot dipped galvanized steel

sections (galvanizing @ 120 grams per

sqm including bothside) consisting of

main ‘T’ runner suitably spaced at joints

to get required length and size of 24X38

mm made from 0.30 mm thick (minimum)

sheet, 1200 mm centre to centre, and

cross ‘T’ of size 24X28 mm made out of

0.33 mm (Minimum) sheet spaced

mm along spaced between main ‘T’ at

600 mm centre to centre to form a grid

of 1200X600mm and secondary cross ’T’

of length 600mm and size 24x28mm

made of 0.30 mm thick (Minimum) sheet

to be interlocked at middle of the

1200X600mm panel to form grid of size

600X600mm resting on periphery walls /

partitions on a perimeter wall angle pre-

coated steel of size (24X24X3000mm

made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at

450mm centre to centre with 25mm long

dry wall screws @ 230mm interval and

laying 15mm thick Densified edges light

weight calcium silicate ceiling tiles of

approved texture (Fine Fissured/

Cosmos/Spintone) in the grid including,

cutting /making opening for services like

diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required,

Main ‘T’ runners to be suspended from

ceiling using G.I. slotted cleats of size

25X35X1.6mm fixed to ceiling with

12.5mm dia and 50mm long dash

fasteners, 4mm G.I. adjustable rods with

galvanized steel level clips of size

85X30X0.8mm, spaced at 1200mm

centre to centre long main ‘T’ bottom

exposed with 24mm of all T-sections

shall be pre-painted with polyester baked

paint, for all heights,

, as per specifications, drawings and as

directed by engineer-incharge.Note:-

Only calcium silicate false ceiling area

will be measured from wall to wall. No

deduction shall be made for exposed

frames/ opening (cut outs) having area

less than 0.30 sqm. The calcium silicate

ceiling tiles shall have NRC. Value of

0.50 (Minimum) for Fine fissured/

Spintone/ Cosmos and 0.75 NRC for

Globe, light reflection 85%

noncombustible as per B.S. 476 part IV,

100% humidity resistance and also

having thermal conductivity. 0.043° w/m

KC.for the best thermal Insulation

66b 35.00 Providing and fixing single layer water

proof gypusm board 12.5 mm thick of the

make New good Group Co.Ltd. or

equivalent & New good Group Co.Ltd.

company sections using water proof

board of size 1220 mm x 1830 mm x

mm suspended by G.I suspender of size

25 mm x 3 mm with intermediate channel

of size 18mm x40mm x0.80mm at

mm center to center ceiling section of

size 40mmx 35mmx 0.55mm at 457 mm

center to center and perimetre chanel A

of size 20mm x 27mm x 30mm x

0.50mm at edges & drops including

paper taps and sofit cleat, anchor

fastener, scoch bolt connecting cleat

joining compound top coat on ceiling

including making necessary opening for

light fitting, diffuser etc. complete as per

detail drawing as directed.

67a Providing and Fixing 6 mm thick Lexan

Polycarbonate multi wall roofing sheet

fixed with hilti screw and rubber silicon

sealer and alluminium strip of size 50 x

mm etc complete as directed by

Engineer in charge

b Providing Making & Fixing Glow sign

Board of suitable size as per approved

color-Designed Back Light Material fixed

on G.I. sheet Box of suitable size with

concealed Light Fittings, Necessary

Scaffolding etc. complete as per

direction of Officer in charge.

68 Providing and supplying ISI Standard RCC

pipes (of sulphate resisting Cement )in

standard lengths of following class and

diameter suitable for rubber ring joints

(socket and spigot) including all

taxes,insurance, transportation,treight

charges,octroi,inspection charges,

loading,unloading, conveyance to

departmental stores, stacking etc. comple

Class NP3 Test pressure 0.7 Kg/Sq.Cm

a 90.00 300 mm Diameter 755 Rmt

b 10.00 450 mm Diameter 1361 Rmt

68 Lowering, laying and jointing R.C.C. pipes in

C.M.1:1 1/2 of following diameters in proper

position , grade and alignment at all level as

directed by Engineer-in- charge including

conveyance from stone to site of work,

labour giving hydraulic testing as per ISI

C 90.00 300 mm Diameter 119 Rmt

D 10.00 450 mm Diameter 171 Rmt

Constructing Bombay Pattern Type

Catch Pit of size 0.60 x 0.60 depth up to

1 mt including excavation, B.B.C.C.

(1:5:10), 23 cms thick brick maso. wall in

the prop. of CM (1:6) with 40 mm thick

IPS flooring in the prop M15 at bottom

and 15 mm thick cement plaster inside

the catch pit in the proportion of CM (1:3)

with out jali etc. comp. as directed.

CatchPit Jali Fixing P/F FRC catch pit jali

with frame 600mm x 600mm clear

opening etc. comp.. As directed by

engineer in charge.

PERCOLATION WELL

Drilling of pilot bore hole in Alluvial Strata

120 by direct Rotary Rig of 250 mm. 694.64 Rmt

72 Reaming 400 mm

73 Electro Logging charges with carting

Providing and Installing 200 mm dia

74 IS:12818 upvc Casing Pipe "CM" class

60 plain Pipe 1,193.75 Rmt

Providing and Installing 200 mm dia

75 IS:12818 upvc End Cap, with Air Vent

1 cowl 669.64 Set

200 mm dia Regular with 1.5 mm sloted

size cage type trapezoidal shape wire

wound little carbon galvanized screen

60 confirming to IS:8110 1,146.43 Rmt

77 Supply of Pea sized Gravel

78 Air Vent of 50 mm Bend

Lowering and Removing of Dropline up

120 to Depth 186 mtr. 147.32 Rmt

80 Air Compressor 60 CFM/150 PSI

Unit Rate Amount

Items Rs. Ps. Rs. Ps.

Electrical Work Estimate

1.0 INTERNAL WIRING

1.1 Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

135 (f) with medium class Rigid PVC pipe and 505.05 Pt

accessories erected concealed in wall/ceiling

1.2 Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade ZHFR/HRFR PVC insulated multi

strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch

and hum free EME four or more step type

electronic fan regulator with separately mounted

and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as

55 (f) with medium class Rigid PVC pipe and 701.40 Pt

accessories erected concealed in wall/ceiling

1.3 Point wiring for secondary light point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both

are of ISI marked 1.1 KV grade ZHFR/HRFR

PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth

continuity and necessary connection with primary

light with accessories erected on Metal / PVC /

wooden box covered covered with appropriate

front plate modules erected on / in wall / ceiling for

open / concealed wiring. with necessary Lamp

holder / ceiling rose / H.D.Connector as

directed.as per pipe erected with following type of

Note:- Maximum up to 6 mtrs length, excess

will be considered as Mains for Secondary

105 (f) with medium class Rigid PVC pipe and 174.30 Pt

accessories erected concealed in wall/ceiling

1.4 Point wiring for Individual Plug with & earth wire

of 1.5 sq.mm (Green) both are of ISI marked

KV grade ZHFR/HRFR PVC insulated multi

strand copper wires up to 10 mtr length, in below

type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as

per pipe erected with following type of

1.4.1 70 [I] For 6A Plug and 6 a switch with 2-1.5 530.25 Pt

sq.mm Cu. Wire from nearby switchboard/mcb

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

1.4.2 15 [II] For 16A Plug and 16 amp switch with 2-2.5 774.90 Pt

sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

1.4.3 14 [III] For 16A Plug and 16 amp switch with 2-4 906.15 Pt

sq.mm Cu. Wire with 2.5 sq.mm ( green)

earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

1.5 120 Point wiring for on board Looped Plug with 6A 255 Pt

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling with

following type accessories

1.6 Point wiring for Two Way Controlled Light Point

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand copper

wires erected in below type of pipe with 6A

Modular type switches and following type of

accessories erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected.

with necessary batten/angle holder or ceiling rose

or H.D.Connector as directed.

5 (f) with medium class Rigid PVC pipe and 627.90 Pt

accessories erected concealed in wall/ceiling

1.7 Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge.

1.7.1 2 (1)One No. SP 6 Amp. 150 E.a.

1.7.2 2 (2) One No 5 pin plug 150 E.a.

1.7.3 40 (7) Blank Plate Single 25 E.a.

1.7.4 14 (8) Computer RJ-45 socket 159 E.a.

1.7.5 8 (9) 16 Amp. SP one way switch 179 E.a.

1.7.6 8 (10) 6/16Amp. Universal socket 198 E.a.

1.7.7 4 (13) 6A/10A/16A/20A/25A/32A Single pole 307 E.a.

Modular MCB Switch

Modular MCB Switch

1.8 Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following dia

of pipes, in approved manner as directed

1.9 Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

1.10 providing and erecting Mains with ISI marked

electrolyte stranded copper conductor, Non PVC

Zero Halogen free fire retardant insulated copper

conductor, insulated wire (HRFR) conforms to IS-

694, erected in existing pipe with 1.5sq. mm

copper conductor of same specifications for earth

continuity of following size.

In Existing medium class Rigid PVC pipe and

1.10.1 780 (a) 2 wire 1.5 sq. mm 51 Mtr

1.10.2 1460 (b) 2 wire 2.5 sq. mm 71 Mtr

1.10.3 120 (a) 2 wire 4 sq. mm 101 Mtr

1.10.4 340 (b) 2 wire 6 sq. mm 139 Mtr

1.11 providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated

stranded wire of green colour for earth

continuity of following size

(A) with medium class Rigid PVC pipe and

1.11.1 80 (h) 4 wire 6 sq. mm 258 Mtr

1.11.2 90 (i) 4 wire 10 sq. mm 421 Mtr

(use earth wire of 4 sq.mm )

1.12 providing and erecting Mains with ISI marked,

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears,

motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required.

1.12.1 10 (e) One wire 6.00 sq. mm 56 Mtr

1.12.2 10 (f) One wire 10.00 sq. mm 91 Mtr

1.12.3 20 (g) One wire 16.00 sq. mm 141 Mtr

1.12.4 10 (h) One wire 25.00 sq. mm 234 Mtr

1.12.5 40 (i) One wire 35.00 sq. mm 298 Mtr

1.12.6 20 (j) One wire 50.00 sq. mm 466 Mtr

1.13 Supplying and erecting Flexible PVC insulated

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

1.13.1 170 e) 1.50 Sq.mm 3 core round PVC sheathed 46 Mtr

1.13.2 110 h) 2.50 Sq.mm 3 core round PVC sheathed 77 Mtr

1.13.3 20 k) 4.00Sq.mm 4 core round PVC sheathed 175 Mtr

1.14 Supplying & erecting M.S. Box having 16 Gauge

painted with red oxide or Heavy duty PVC box

erected flushed on wall or concealed in wall with

necessary plastering & finishing as directed of

following size.

1.15 Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid

material with ignition free and flame proof

confirming BS with necessary end caps Internal

and external bend, flat bends, coupler, tee etc..All

necessary accessories and measuring of following

1.15.1 5 (2) 100 mm x 50 mm trunking 424 Mtr

1.15.2 5 (4)100 mm x 50 mm trunking with TWIN 1309 Mtr

compartment With clip in divider

1.16 Supply & installation of surface mounted U PVC

snap-on adaptable trunking raceways, fabricated

out of U-PVC to Off-White or approved shade as

per IS 733 of thickness 2.0mm for the base and

sides with all accessories like removable covers,

joints ,height spacer,angles complete with

necessary bends, suitable sized junction boxes

and tees etc, Complete.

5 (a)Size: 50x80mm PVC Raceways for Power & 1052 Mtr

Data with 2 compartments above specifications.

1.17 Supply & installation of modular type accessories

for U PVC snap-on adaptable trunking/Pop up

Box with required items erected with necessary

connection. As desired by Engineer In charge

1.17.1 2 i) 6 A SP 1 Way Switch 204 No

1.17.2 1 ii) 16A SP 1 Way Switch 351 No

1.17.3 2 iv) 6A universal socket shuttered 347 No

1.17.4 1 iv) 6/16 A universal socket shuttered 458 No

1.17.5 1 vi) Cat-6 LAN Socket 561 No

1.18 Supplying & erecting approved make Telephone

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming

to C-DOT erected in existing pipe. of following

size of conductors & nos.of pairs. With necessary

(b) Armoured [Jelly Filled]

30 1) Ten Pairs 124 Mtr

1.19 LAN NETWORK

1.19.1 14 SITC of CAT6 UTP 24AWG PATCH 155 No

CORD:1M,Plug 30U' Snag less (Including Five

year free maintenance with guarantee)

1.19.2 14 SITC of CAT6 UTP 24AWG PATCH 199 No

CORD:2M,Plug 30U' Snag less (Including Five

year free maintenance with guarantee)

1.20 LAN SWITCH

1.20.1 1 SITC of 24 x 10/100/1000BASE-T ports 4 x 15247 No

Gigabit RJ45/SFP Combo ports Advanced L2

switching and security features L2+ Static Routing

Optional “standard mode” or “surveillance mode”

management user interface

1.20.2 1 SITC of Patch Panel UTP Keystone- 24 Port- 1485 No

Unloaded (Cat 5e,Cat 6 & Cat 6 A ) (Including

Five year free maintenance with guarantee)

1.21 Providing & erecting main Distribution (MDF)

indoor type, back mounted frame as per DoT

standard approved with krone strips

1 (a) Suitable for 10 pair 985 E.a.

1.22 Providing & Erecting Netwrok rack with following

capacity with Necessary cooling fan,Cable

manager,6A PDU,equipment rack with necessary

mounting accessories.

1.23 Supplying & erecting approved make LAN cable

of following size in existing pipe as per direction

380 [C] CAT - 6 47 Mtr

SUB - TOTAL OF INTERNAL WIRING

2.0 Switchgears , Panels , MCBDBs & MCBs

2.1 Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal &

magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing

G.M.S. housing.

1 ICS=100% of ICU only 8773.6 No

2.2 Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal &

magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing

1 ICS=100% of ICU only 17667.1 No

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 35 KA. and above at 415 V .

having normal current rating 250A. with variable

thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

1 ICS=100% of ICU only 22812.9 No

2.3 FABRICATION AND BUSBARS CHAMBER

2.3.1 18 Fabricating the box type items made from M.S. 179 Kg

Sheet with A.I. supports, wings, doors, handles

other hardware materials as per requirement

design with finishing by three tank powder coating

processed inside and outside painted, erected as

directed including minor civil work. to install above

2.3.2 Providing and erecting busbar chamber

confirming to IS-375 fabricated from 16 G.M.S.

sheet, dust & vermin proof having hinged door

with rubber gasket and necessary busbar

supports with COPPER busbar having current

density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with

colour insulation tape for phase sequence, three

phase & neutral each suitable for following current

capacity with necessary painting mounted on wall

or pedestal frame of required size with necessary

1.5 (C) Suitable for 300 Amp. capacity 8455 RnMtr

2.3.3 providing and erecting Approved make Earth

fault Relay suitable to mount with inter

connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB

rating as following along with shunt trip 220V AC.

with all internal connections & complete erected in

existing M.S.housing..

2.4 Design, fabrication, assembling, supply,

installation, testing and commissioning of cubicle

type, wall / Floor mounted LT panel suitable for

415 V 3 phase, 4 wire 50 Hz AC supply system

fabricated in compartmentised design from CRCA

sheet steel of 2 mm thick for frame work ,Doors

and partitions IP 42 and covers,3 mm thick for

gland plates i/c cleaning and finishing complete

tank process in house facility for powder

coating in approved shade, extendable type FP

aluminium alloy busbars of high condectivity,

DMC/SMC busbar supports, entire panel shall

have a common copper earthbar of size 25mm X

5 mm at the rear with 2 Nos. earth studs, solid

connection from main busbar to switchgears with

require size of aluminium busbar & control wiring

with 1.5 sqmm FRLS insulated copper conductor

cable, cable alleys, cable gland plates i/c

accessrories as per specification and providing

switchgears, metering instruments etc. for

following panel.G.A.Drawing to be approved by

EIC or consultant. ( Outgoing connectors must be

nut-bolt type. Outgoing mains for 63Amp MCBs

must be of 4 x 16sqmm cu flexible

wires).Incomers Mains for MCBs shall be always

from the busbars.

( a ) Providing cable clamps / supports within

distribution boards cable alley.

( b ) All hinged door shall be earthed through

sq mm tinned b raided copper wire.

( c ) Pad locking of MCCB’s handles in “OFF”

( d ) All the C.T.s should be auto short link type.

( e ) All the MCCB's should be with rotary handle.

( f ) All incoming and outgoing air circuit breakers

shall be placed on middle portion of the vertical in

single tier formation.

( g ) Any descripancy found in SLD & Boq , it

should be brought in the notice of the client /

consultant, and the decision will be taken final by

Client / consultant.

2.4.1 Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal &

magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing

G.M.S. housing.

1 ICS=100% of ICU only 7976 No

2.4.2 Providing and erecting Approved make Three pole

moulded case circuit breaker having breaking

capacity ICU of 25 K.A. at 415 V having normal

current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

1 ICS=100% of ICU only 5302 No

2.4.3 providing and erecting Approved make Earth

fault Relay suitable to mount with inter

connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB

rating as following along with shunt trip 220V AC.

with all internal connections & complete erected in

existing M.S.housing..

2.4.4 6 providing and erecting Miniature circuit breaker 268 No

single pole 0.5A to 2A system and having

breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark

2.4.5 4 providing and erecting Miniature circuit breaker 111 No

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

2.4.6 Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

2.4.7 Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity

2.4.8 Providing and erecting following additional parts

for panel mounting MCCBs

2.4.9 4 (A)Extended operating rotary handle with pad lock 865

with three position trip,off,on suitable for 25A to

250 A panel mounting

2.4.10 1 Supplying and erecting approved make panel 1263 No

mounting type Digital Voltmeter having 3 digits

LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring

etc .with manufacturers calibration certificate.

2.4.11 1 Supplying and erecting approved make panel 1543 No

mounting type Digital Ammeter having 3 digits

LED display, external CT operated, calibrated for

0 to 1000 Amps suitable to operate on 500 Volt

AC , erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate.

2.4.12 2 Supplying and erecting Ammeter / Voltmeter 314 No

selector switch for 3 phase AC Supply 500 V on

existing panel board with necessary connections.

2.4.13 6 Providing & erecting L.T. Current Transformer 272 No

with bar primary 50/5 to 1000/5 ratio 15 VA

burden erected in existing CRCA box duly

secured with insulating materials connected to the

2.4.14 1 Supplying & erecting approved make Power 5052 No

Factor Meter 150mm dia flush/projection type/

balanced & unbalanced load to work with

appropriately provided CT’s 100/5A to 400/5A

ratio & other accessories complete erected in

M.S. box & connected to the circuit by means of

PVC copper Core leads.

2.4.15 6 Supplying and erecting approved make suitable 43 No

panel indicator LED type lamp, lens cover,

complete erected with necessary connections.

2.4.16 4 Providing and erecting metallic vitrified danger 69 No

notice board as per language suggested by

engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

2.4.17 2 Providing and erecting required size Aluminium 223 KG

strip for earthing of H.T. , OCB / ACB /

Transformer, LT panel board, Motors etc. using

2.4.18 2 Providing and erecting required size Copper strip 787 Kg

for earthing of H.T. OCB / ACB/ Transformer, LT

panel board, Motors etc. using copper clamp.

2.4.19 1 providng and erecting Approved make energy 2179 No

meter 3 phase 4 wire unbalanced load 500 V. 5 to

10A complete erected as directed with necessary

earth wire.Class-1

2.4.20 90 Providing , erecting , fabricating the M.S. structure 77 Kg

as per requirement on site incorporating proper

size of M.S. angles,square,round, flats, bars,

channels, sections complete with cutting, welding,

grinding & finishing duly painted with one coat of

red oxide with erection on site as per direction of

engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

2.4.21 Supplying and erecting triple pole & neutral 440V /

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current

density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with

colour insulating tape for phase sequence of

following current carrying capacity, erected with

necessary bus bar supports /insulators, main

cable socket to each bar, erected in existing

cubical panel with necessary connections.

4 (C) Suitable for 300 Amp. capacity 4861 RnMtr

2.4.22 Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer

incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding,

riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge

with erection of

supplied switch gears, BUSBARS, suitable size

of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus

bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall

be supplied with following approved

manufacturers with following size.

(B) The standard companies switch gear shall be

used and only manufacturers at CPRI approved

2.5 (i) with 350mm depth 14755 Sqmtr

2.4.23 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be

erected as directed of following size.

2.4.23 16 (N) 4 core 16 Sq. mm 721 Mtr

2.4.23 12 (M) 4 core 10 Sq. mm 568 Mtr

2.4.23 2 (L) 4 core 6 Sq. mm 361 Mtr

2.4.23 50 (C) 2 core 6 Sq. mm 202 Mtr

2.4.23 4 (B) 2 core 4 sq.mm 130 Mtr

2.4.24 providing and erecting Mains with ISI marked,

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required.

2.4.24 40 (a) One wire 1.00 sq. mm 12 Mtr

2.4.24 95 (b) One wire 1.50 sq. mm 17 Mtr

2.4.24 36 (c) One wire 2.50 sq. mm 27 Mtr

2.4.25 1 Design, fabrication, assembling, supply, 57615 No

installation, testing and commissioning of cubicle

type,15KVAR, Voltage Rating 415V A.C.,3-Phase

, APFC Panel having 5-steps ( 2-3-5--5 kvar

heavy duty can type capacitors ) with suitable

rating of Incomer MCB, CT. as per approved by

engineer incharge.

2.4.26 Supplying & erecting approved make IP 55 grade

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet

duly epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole

contactor (cat-III)with analog time switch, auto

manual switch of same make and suitable input

and output Bakelite terminals and with door

earthing approved by Engineer in charge.

MCBDBs and MCBs

2.5 150 providing and erecting Miniature circuit 111 E.a.

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark

2.6 Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

2.7 Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity

2.8 4 Sheets steel powder coated enclosure suitable 175 E.a.

for incorporating One/Two nos. MCB.

2.9 Providing and erecting Sheet Steel powder

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal

single phase outgoing

(b) sheet steel double door (IP-43)

2.9.1 6 (i)4 way ( concealed manner ) 747.60 E.a.

2.9.3 4 (iii)8 way ( concealed manner ) 1369.20 E.a.

2.9.5 4 (iv)12 way ( concealed manner ) 1773.60 E.a.

2.9.7 5 (v) 16 way ( concealed manner ) 1996.8 E.a.

2.10 (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation

(b) sheet steel double door

2.10.1 3 (i)4 way ( concealed manner ) 2779.20 E.a.

2.10.3 1 (ii)6 way ( concealed manner ) 3462 E.a.

2.10.5 3 (iii)8 way ( concealed manner ) 4054.80 E.a.

2.11 Supplying & erecting Sheet Steel powder coated

Cable end termination Box to be mounted on

Top or Bottom of the MCB Distribution Box for

housing/covering Extra wires & Cables, suitable

for following size of MCB DB Box.

2.11.1 2 (G) Three Phase 8 Way ( concealed manner ) 819.60 E.a.

2.11.2 2 (G) Three Phase 8 Way 683 E.a.

2.12 providing and erecting Approved make ELCBs /

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature &

do not incorporate any electronic component. for

following Max. rating erected as directed

2.12.3 7 (iii) 63 Amps. DP 2628 E.a.

2.13 15 Providing and erecting metallic vitrified danger 69 E.a.

notice board as per language suggested by

engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

2.14 15 Providing & erecting Medium Voltage Danger 26 E.a.

Notice Board sticker as per language

suggested by engineer incharge of standard

size as per IS-2551

SUB - TOTAL OF Switchgears , Panel and

Follow IS code :3043 is the guideline for the

3.1 160 Providing and erecting required size HOT deep 77 KG

Galvanised iron strip for earthing of H.T. , OCB/

ACB/ Transformer LT panel board, Motors etc.

using proper clamp.

3.2 20 Providing and erecting required size Copper strip 787 KG

for earthing of H.T. OCB / ACB/ Transformer, LT

panel board, Motors etc. using copper clamp.

3.3 10 Providing and erecting Annealed bare Copper 787 KG

wire 8 to 16 SWG.

3.4 45 Providing and erecting HOT deep Galvanised 77 KG

iron strip wire 8 to 16 SWG.

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable

for following type of applications with chamber

and heavy duty cover.(approved make OEM has

to submit test certificate) & having back filling

compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 W/ meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be

capable to retain moisture for long time

Necessary test report must be submitted.

3.5.1 3 (a) For Electrical Installation up to 440V in normal 4546 E.a.

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

3.5.2 1 (c) For Electrical Installation covering Transformer 8551 E.a.

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation,

SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

3.6 3 Supply, installation,testing and commissioning of 12230 No

Chemical Earthing with UL Certified 17.2mm Dia.

X 3000mm Long 254 Micron-Copper bonded M.S.

Rod manufactured as per IEC 62561-2 with 25Kg

Bentonite powder plus " U " bolt rod clamp

complete with Lockable high performence

chamber suitable & tested for 5000T capacity

with SS Hardware.or equivalent

SUB - TOTAL OF Earthing

4.0 CABLES, Cable Termination and cable

4.1 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

4.1.3 65 (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 375 Mtr

4.1.4 70 (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) 486 Mtr

4.2 Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

4.2.1 55 (a) 4 core 4 Sq. mm 116 Mtr

4.2.2 300 (b) 4 core 6 Sq. mm 125 Mtr

4.2.3 80 (c) 4 core 10 Sq. mm 139 Mtr

4.3 Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

4.3.1 80 (d) 4 core 16 Sq. mm 152 Mtr

4.3.2 15 (e) 4 core 25 Sq. mm 189 Mtr

4.4 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe at road crossing or

floor of following size of cable.

4.4.1 65 (C) 3 core 6 Sq. mm 392 Mtr

4.4.2 25 (D) 3 core 10 Sq. mm 495 Mtr

4.5 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

4.5.1 30 (A) 4 core 2.5 Sq. mm 269 Mtr

4.5.2 30 (B) 4 core 4 Sq. mm 361 Mtr

4.5.3 50 (C) 4 core 6 Sq. mm 505 Mtr

4.6 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

45 (C) 4 core 10 Sq. mm 670 Mtr

4.7 300 Making trench in soft soil of suitable width of 90 55 Mtr

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

4.8 260 Covering of cable with second class bricks or 139 Mtr

cement tiles laid cover the cable crosswise & also

on both sides with covering of 7. 5 Cm. layer of

sand above & below cable (16 bricks per meter)

4.9 10 ( A )Making trench in Hard Murrum / Tar Road of 74 Mtr

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

4.10 5 (B) If additional machinery like hammer driller or 354 Mtr

4.11 Drilling the road without breaking the road

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

4.11.1 5 (A) Up to 100 mm bore dia 488 Mtr

4.11.2 5 (B) Up to 150 mm bore dia 610 Mtr

4.12 Supplying following size of Light duty “A”

Class G.I . Pipe & erecting as directed by

Engineer-in-charge.

20 (A) 25 mm dia 171 Mtr

4.13 Providing & laying. R.C.C. Hume pipe for cable

to be laid 90 cm. below ground across the road

crossing or on floor with necessary material in an

approved manner and making the ground as per

4.14 Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

4.14.1 50 (A)50 mm outer dia 62 Mtr

4.14.2 300 (B)63mm outer dia 73 Mtr

4.14.3 10 (C))90 mm outer dia 95 Mtr

4.14.4 50 (D)120 mm outer dia. 136 Mtr

Providing & laying approved make ISI marked

Rigid PVC pipe having 6Kg / cm2 (Class-3) to

be erected at road crossing on or floor as directed

for laying of cable. The pipes as following size of

dia & weight per 6 mtr.

4.15.1 5 (D) 75 mm inner Dia. (5.5 Kg/6RMT) 124 Mtr

4.15.2 5 (F) 110 mm inner Dia. (11.63 Kg/6 RMT) 234 Mtr

4.16 Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out going

tails, insulating tape etc for following size of

4.16.2 30 (b) 2 to 4 core 6 Sq. mm 38 E.a.

4.16.3 5 (c) 2 to 4 core 10 Sq. mm 38 E.a.

4.16.4 6 (d) 2 to 4 core 16 Sq. mm 47 E.a.

4.16.5 4 (e) 2 to 4 core 25 Sq. mm 51 E.a.

4.17 Providing and, fixing heavy duty flange type

brass double compression type cable gland

with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc

for following size of cables.

4.18 Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

4.19 Solder less crimping type Copper lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

4.20 Providing and fixing approved make Perforated C

type cable tray. Made from sheet steel. The

cable tray should be single or double bended as

per required and as per IS 2062/1079 and shall be

coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut

- bolt and washers etc. erection with necessary

support( included) as per Specification and as per

instruction of engineer in charge..

SUB - TOTAL OF Cables,Cable

Terminations & Cable Trenches

5.0 Light Fixtures & Fans

Supply , Installation, testing and commissioning of

pre-wired, LED fitting/post top luminaries etc of all

types, complete with all accessories and tube etc.

directly on ceiling/ wall, including connection with

1.5 sq. mm FRLS PVC insulated, flexible, copper

conductor, single core cable with flexible conduits

and coupler and earthing etc. as required. Note:-

The LED Light fixtures should comply all

international standards third party ( LM 79 for

complete fixture, LM 80 for individual LED ).

The Manufacturer / Channel Partner of the

Manufacturer has to submit 4- Years

unconditional free Replacement Guarantee for

complete fixture.

5.1 Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,CCT

3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 %( fitting

required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the

5.1.1 ( A ) Tube Light with integral / non integral

5.1.1a 2 (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 293 No

5.1.1b 35 (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 530 No

5.1.2 (B) LED Panel Light with provision for Plane front

frame with translucent cover fixed to housing

5.1.2a 4 (i)up to 8 Watts,4" x 4", Surge-2 KV 271 No

5.1.2b 75 (iii) 12-15 watts, 6" x 6", Surge-2 KV 462 No

5.1.2c 100 (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV 607 No

(vi) 36 watts, 24" x 24", Surge- 2KV

5.1.3 (G) Spot Light 425 Lumens, Surge-2KV

5.1.3a 8 (a) 3 to 7 Watts 805 No

5.1.3b 8 (b) 8 to 11 Watts 1354 No

5.1.4 7 (H) Mirror Light 9 Watts, wall mounted minimum 1 309 No

5.2 45 Providing & erecting Approved make Power 1929 No

Saving 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C.

50 Hz 1200 mm sweep complete having 3blades

with aluminium blades with , canopy & 30 cm.

down rod erected with earthing.(Make shall be

approved by Engineer in charge))

5.3 5 Providing & erecting Approved make Ceiling Fan 1721 No

with double ball bearing ISI mark with condenser

A.C.230V 50c/s. 1400 mm. sweep complete,

canopy erected on existing hook or clamp with

earthing [ Make shall be approved by Engineer in

5.4 2 Providing & erecting Approved make Ceiling Fan 1963 No

with double ball bearing with Condenser 230 volt

A.C.50 Hz. 900 mm sweep complete having

Aluminium blades, canopy erected complete. [

Make shall be approved by Engineer in Charge]

5.5 1 Supplying and erecting approved make oscillating 2329 No

type medium duty bracket fan with Aluminium

Blades A.C. 23OV. 50cy/s wall mounted with

height adjustment and rotary tilting device

complete with guard, mounting accessories kit,

pull cord for speed and oscillation flexible Core

plug top complete erected with lead wires as

directed. 400MM.

5.6 15 Supplying & erecting approved make low noise 1687 No

decorative exhaust fan having size 200mm with

1350 RPM with square frame ABS body with

inbuilt lowers & square frame.

Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary

5.8 55 Providing 2.5mm.thick laminated acrylic sheet to 18 No

cover the fan hook or Fan box.

5.9 55 Supplying and erecting 19 / 20 mm. nominal 107 Mtr

bore Medium Class M.S. Pipe down rod erected

duly painted for fan complete with proper

insulation without leakage and earthing.

5.10 Supplying & erecting single phase approved

make industrial exhaust fan suitable for medium

duty ring mounted low noise operation suitable for

medium duty having following dia size and

maximum speed in RPM

1 [D] 450 mm dia 900 RPM 3306 No

5.11 1 Providing suitable M.S. louver shutter of the 365 No

5.12 1 Supplying & erecting electro galvanised G.I. 628 Sqmtr

wire micro mesh jali cover of grade

required size with suitable wooden frame duly

fitted in wall outside of exhaust fan for insect

Providing and erecting PVC body surface or

pendent mounting LED Bulk type 9 watt Lighting

Fitting with electronic driver. And lumen output

from luminaire 720lm , input voltage range 90-

300VAC , 50Hz cool white(3000 to 6500k), inbuilt

driver, -20degC to +60degC working temperature,

AL frame with Beam Angle 120deg

SUB - TOTAL OF Light Fixtures & Fans

6.0 External lighting

Supply , Installation, testing and commissioning of

pre-wired, LED fitting /post top luminaries etc of all

typesof external lights, complete with all

accessories and tube etc. directly on pole / pole

bracket , including connection with 1.5 / 2.5 sq.

mm FRLS PVC insulated,3 core flexible, copper

conductor, with flexible conduits and coupler and

earthing etc. as required.

6.1 Supplying and erecting LED street light / Flood

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

6.1.1 (A) Street Light (IP-65), Surge protection -4KV

/5000K integral and 10 kv non integral ,Light must

have 440VAC line supply protection. It should

withstand 48 hours for 440VAC line supply.

11 (f) Above 60 watts to 90 watts 5917 No

(B) Flood Light (IP-65), Surge -4KV/5000K ,Light

must have 440VAC line supply protection. It

should withstand 48 hours for 440VAC line supply

6.1.2a 2 (c) Above 60 watts to 90 watts 6028 No

6.1.2b 2 (v) above 120 to 160 watts 8370 No

6.2 Supply of approved make frp/grp pole having

followiing specifications :

FRP/GRP pole made by centrifugal moulding

process using thermoset resin polyester/epoxy

resin system having minimum glass content

45.0%.The pole should be in one pieceand

tapered round in shape,having smooth outside

surface finish and should be totally fre from

corrosion as well as non conductive and shock

proof. Pole should be provided with FRP/GRP

base bracket dully fabricated from metal(M.S) and

dully claded with FRP/GRP material to avoid any

metal exposer and painted with PU paint.Pole

should mechanical properties i.e 1. Specfic gravity

(ASTM D 792) 1.3‐1.8 Kg/m3, 2. Glass Content %

by weight (ASTM D 2584) 45.0 ‐55.0%, 3. Water

absorption (ASTM D 570) <0.5%, 4. Tensile

Strength(ASTM D 638) 200+/‐50Mpa, 5. Flexural

strength (ASTM D 790) 250+/‐50Mpa,

Compressive Strength (ASTM D 695) 200+/‐

50MPa, 7. Yeild Strength(ASTM D638) 250 +/‐

Pole should be flame retardant as per IS

6746.Resin used shall be UV resistance and

pigmented. Pole should be painted with first coat

of epoxy primer and then two coat of highly

weather resistance polyurethen paint to ensure

proper addhesion of the paint.Minimum thickness

shall be 80 to 100 micron.Defelection of the pole

shall not exceed more than 10.0 % of the length of

the pole for the given load.Pole should be

generally made as per the dimensional

data,performance criteria and some

interchagebility features of poles as per the

standard ANSI C123.20 latest version of ASTM D

923/01 including cable termination box with

necessory accessories.The size of pole and type

of installation with foundation , Anchor Base &

Internal junction box as per the manufacturer

details and site requirement .

(3) 'B' class (Heavy Duty) frp/grp pole suitable

for base plate mounting

[D] Overall Length of 6.0 meter, Average

thickness : 7mm, Top/Bottom Outside Dia.

76/176mm +/‐2.Weight of Pole 25.0 Kg approx.

(Without base) Metal Anchor Base dully frp claded

(Size : 340 Ø * 12mmthk , Mounting hole PCD

285mm * 6 nos. of 20 Ø hole)

6.3 Providing FRP/GRP arm bracket of having 15˚

arm with 50 mm OD pipe *5 mm thk,1000mm long

from pole centre

6.3.1 9 (a) Single arm bracket 1882 No

6.3.2 1 (b) Double arm bracket 2390 No

6.4 4 Supplying & erecting sintex make SMC press 472.00 No

moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with bakelite

connector strip 4way & hinged doors having

locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on wall

( c)150mm x 125mm x 100mm [deep].

6.5 4 Providing cement concrete.for foundation or 5077.00 CU Mtr

for concrete filling in 1:2:4 ratio with 20 to 25 mm

stone metal duly plastered with necessary curing

for pole muffing or any other purpose.

B' class galvanised iron pipe 32 mm outside dia

45 cms long duly welded on 20 cms x 20 cms x

mm thick M.S. base plate, erected on wall or

corner for mounting street light luminaire with

necessary hardware materials duly painted.

SUB - TOTAL OF External Lighting

7.1 1 Supplying & erecting approved make Automatic 2332 Job

liquid level controller 6A. with sensor testing

as per instruction of Engineer in charge on site

complete with wiring connection with existing

wires , with copper conductor from pump to upper

and lower tank.

7.2 Supplying and erecting Flexible PVC insulated

multistrand multicore 1.1 kv grade ISI marked

copper wires of following size to be erected as

90 e) 1.50 Sq.mm 3 core round PVC sheathed 46 Mtr

7.3 Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following dia

of pipes, in approved manner as directed .

Providing & erecting water cooler having storage

capacity 150 Ltr. & cooling capacity 150 Ltr.per

hour @ an ambient temp of 45˚ C. The outlet

temp. of the water should drop by 15˚C within a

hour, The water cooler should be comprising of

hermetically sealed compressor, fan motor,

condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete

with necessary inlet & outlet connection. The body

of water cooler will be made from Stainless Steel.

Supplying and erecting water filter cum purifier

with ultra violate technology. (Aquaguard /

waterdoc model or equivalent symphony/

crystal/videocon model)

7.6 Providing & erecting open well horizontal mono

block pump set with cast iron body, complete for

three phase submersible motor having

7.6.1 2 [B] For 2 HP 3 phase open well horizontal mono 10628 No

block pump set suitable for 200 LPM @ 25 mtr

head suitable for 50 mm dia delivery pipe

[C] For 3 HP 3 phase open well horizontal mono

block pump set suitable for 85 LPM to 270 LPM

@ 11 mtr to 33 mtr head suitable for 50/65 mm

dia delivery pipe

Supplying & erecting approved make motor

control cubical panel (Direct - on - line) made

from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and

locking, arrangement consisting of suitable size of

ON- OFF isolator (AC - 3/23duty) main fuses,

single phasing preventer, indicating lamps for R-

Y - B phases, overload relay, Automatic water

level controller, Ammeter, Voltmeter each with

two way selector switch incoming, wires duly

socket crimped, main contactor & overload relay,

start - stop push buttons, to be erected on angle

iron frame grouted on wall as directed. The

isolator, overload relay & contactors will be of L &

T, Siemens or BCH make only.

2 (a) DOL up to 5.0 H.P. 7646 No

7.8 1 Charges for doing liasioning work for obtaining the 20500 No

necessary clearances from the Electrical inspector

/ competent Authorities for the total Electrical

installation,co-ordinating with various agencies. All

necessary drawings, calculations, test certificates,

etc. as required by these authorities shall be

prepared and furnished by the EPC Vendor. Any

modification/rectification as required by these

authorities shall be carried out by theEPC Vendor

at free of cost. The fees required to be paid to

these authorities for inspection shall be borne by

Owner on production of documentary evidences.

7.9 online Un-interruptible Power Supply

Supplying and erecting approved make online

Un-interruptible Power Supply system comprising

flat cum-boost charger with IGBT base rectifier &

Inverter & sealed maintenance free SMF

batteries. The charger having operating capacity

for input 160-270V AC & inverter having output

230V,50 Hz Ac with 0.8 load power factor with

battery, over/under voltage output with over load

& short circuit protection equipment. The system

housed in CRC sheet duly powder coated paint

with following power backup.with MS painted

batteries stand, 10% Overload capacity for

momentary load.

7.9.1 1 (C) 3 KVA with 1Hr Backup 82120 No

7.9.2 1 [E] 6 KVA with 1Hr Backup 177211 No

7.10 Providing and erecting approved make split air-

conditioning unit consisting of copper condensing

unit with fan motor, hermetically sealed rotary

compressor with accessories etc. duly connected

separately erected evaporating unit and blower

motor with its accessories by means of extra

supplied proper insulated copper tubing,drain

PVC pipes suitable for ( cost includes powder

coated Stand, Eco Friendly green gas charging,

15A plug top & Remote Control) with necessary

(1)For ISEER Range (KWH/KWH)(3.1 to 3.99)

7.10.1 1 [a] For 1 Ton Capacity 30409 No

7.10.2 1 (b) for 1.5 ton capacity 36455 No

7.10.3 3 (c) for 2 ton capacity 45830 No

7.11 Supplying and installing MS angle , powder

coated / Painted standard type of wall/floor stand

mount for outdoor unit of split AC of following

capacity, erected with necessary hardware

materials as directed.

4 (A) 25mm*25mm*3mm thick M.S angle suitable 1305 No