Construction of 0.52 Lac gallons capacity OHT at Hamray for WSS Hamray. Under NRDWP.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50m, disposed earth to be leveled and neatly dressed, in all kinds of soils.

Extra for every additional lift of 1.5 mtr. or part thereof in all kinds of soil.

Providing and laying stone soling hand packed on level.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone agg. 20mm nominal size) Crushed

Centering and shuttering including strutting, propping etc, and removal of form work for: Foundations, footings, bases of columns etc., for mass concrete

Centering and shuttering including strutting, propping etc, and removal of form work for:Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Centering and shuttering including strutting, propping etc, and removal of form work for: Arches, domes valuts upto 6m span

Centering and shuttering including strutting, propping etc, and removal of form work for:Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc, and removal of form work for: Spiral stair/landing/plateform

Extra for shuttering In circuilar work (20 % of respective centring and shuttering items): Foundations, footing, bases of columns etc for mass concrete

Extra for shuttering In circuilar work (20 % of respective centring and shuttering items):Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Extra for shuttering In circuilar work (20 % of respective centring and shuttering items):Lintels, beams, plinth beams, girders, bresumers and cantilevers

Extra for shuttering In circuilar work (20 % of respective centring and shuttering items):Spiral stair/landing/plate form

Extra for shuttering In circuilar work (20 % of respective centring and shuttering items):Extra for arches, domes, vaults exceeding 6 mtr span

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete (T.M.T bars)

Providing and laying in position specified grade of reinforced cement concrete excld. the cost of centring, shuttering, finishing and reinforcement. All work upto plinth level. 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc upto floor five level excluding cost of centering, shuttering finishing and reinforcement 1 : 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc upto floor five level excluding cost of centering, shuttering finishing and reinforcement 1 : 1 : 2 ( 1 cement : 1 coarse sand : 2 graded crushed stone aggregate 20mm nominal size).

Extra for R.C.C work in super structure above floor V level for each four floors or part thereof.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works.

Supplying and fixing rolling shutters of approved make, made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.50cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part 1 and M.S top cover of required thickness for rolling shutters. 80x1.20mm M.S laths with 1.20mm thick top cover

Providing and fixing ball bearing for rolling shutters

Extra for providing and mixing water proofing material

12mm cement plaster finished with a floating coat of neat cement of mix : 1 : 3 (1cement : 3 fine sand)

Extra for plastering on circular work not exceeding 6m in radius. In two coats

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and fixing of Anti lightening copper conductor of approved quality and make with 0.60 x 0.60 mtr 12mm thick copper plate Complete job

Providing and fixing of level indicator of approved quality and manufacture all inclusive Complete job. As directed by Engineer incharge

Providing and fixing of M.S flanges to 150mm dia G.I pipes, including cutting of threaded portion having flanges thickness 12mm incld. cost of rubber insertion, cost of flanges, nuts, bolts and laying in trenches incld. all carriages involved upto actual site of work as directed by site Engineer. i) 150mm dia

Providing and fixing of double flanged C.I sluice valve conforming to I.S 780 of 1984 standard make kirlosker PNI type incl. cost of nuts, bolts, R.I cloth all sorts of carriages upto site of work, cost of pedestal tail pieces all leads etc complete job . i) 150mm dia

Providing and fixing of different pipe specials viz, bends, tees etc duly flanged on end, 12mm thick incld. Welding charges, cost of flanges, all carriages involved upto actual site. The pipe specials to be fabricated as per the direction of site Engineer incharge:150mm dia bend

Providing and fixing of different pipe specials viz, bends, tees etc duly flanged on end, 12mm thick incld. Welding charges, cost of flanges, all carriages involved upto actual site. The pipe specials to be fabricated as per the direction of site Engineer incharge:150x150mm dia tee

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Cement/Steel from Divisional store for avg. lead 17 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Sand for avg. lead 21 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: 20mm agg. for avg. lead 26 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Stone soling for avg. lead 26 kms

M/s MALIK SHABIR AHMAD

M/S RESHI BUILDERS