Repairing and Renovation of Office Building at Mukteshwar Colony Office Mukteshwar, Dist.:- Banaskantha.

BILL OF QUANTITIES

Name of Work :- Repairing and Renovation of Office Building at Mukteshwar

Colony Office Mukteshwar, Dist.:- Banaskantha.

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Item Description of Item (with brief specification Quantity Unit Rate In Amount

No and reference to book of specifications) figures

1 Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

2 Dismentling doors, windows, ventilators etc. (wood

or steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and 33.00 NOS 190.190

stacking them within all lead and lift.(i) Not

exceeding 3 Sq.M. in area.

3 Dismantling santtary fittings like wash basin . W.C.

pan Indian and European type, flushing tank etc. 8.00 NOS 410.130

including stacking the materials with all lead and lift.

4 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain

water pipes with fittings and clamps including

stacking the materials with all lead and lift ( for any

5 Removing and scraping of old deteriorated plaster of

any thickness fromm wall / R.C.C member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

6 Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

lift.(ii) In Cement Mortar.

7 Demolition including stacking of serviceable

materilas and disposal of unserviceable materials 1.00 CMT 1071.630

with all lead and lift. (i) R.C.C. work

8 Painting two coats (excluding priming coat) on

previously painted steel and other metal surface

with enamel paint, brushing to give an even shade 56.00 SMT 57.070

including cleaning the surface of all dirt, dust and

other foreign matter.

9 Providing and laying cement concrete 1:4:8 (1-

Cement : 4- coarse sand : 8- hand broken stone

aggregates 40 mm nominal size) and curing 58.00 CMT 2627.150

complete excluding cost of formwork in (A)

Foundation and Plinth

10 Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and

material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

_paret-II Consentration Weight one percent is 255.00 SMT 86.000

recommended i.e one litre 20 EC chemical emulsion

with 19 liter give 1 % concrentration inclusive of one

litre chemical emulsion appication at the rate of

Litre chemical / Sqm of surface is recommended as

11 Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:6. (1-

Cement : 6 fine sand) (b) Conventional

Item Description of Item (with brief specification Quantity Unit Rate In Amount

No and reference to book of specifications) figures

12 (i) Half brick masonry in common brunt clay

building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement 3.00 SMT 623.600

: 4 -coarse sand ) in foundation and plinth (B)

13 Providing and fixing window having extruded

aluminum Colour anodized section frame main outer

size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt,

horizontal Two track member size 61.85 mm x

mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member

of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of

0.659 Kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, vertical member of size 40mm x 18mm

with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing

to frame as per details etc complete for window.

14 Providing and fixing FRP frame size 125x65 mm and

35mm thick FRP shutter having extra reinforcement

on sides & edges in polish finish. The core of the

shutter & frame is to be filed up with injected

polyurethene foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be

water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary screws &

alluminium S.S fixtures & fastenings & astener

15 Provoding and fixing flush door shutters, solid core

construction with frame of first class hardwood with

cross board and face veneer or plywood face panels,

including anodised alluminium butt hinges with

necessary screws with front side 1.00 mm decorative 40.00 SMT 3384.000

laminate and back side with 0.80 mm white

laminate.(1) Non-decorative type and block board

core anodised alluminium butt hinges in flush door

shutters (2) 35 mm thick.

16 Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x 1.95 mm

@ Wt 1.094Kg / Rmt with colour Powder Coated

alluminium frame with 5 mm thick transparent 5.00 SMT 1278.030

bronze colour tinted float glass with colour anodized

alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for.window

17 providing and fixing hydraulic door closer with

screws to pivoted / hinged door of approved make &

color approved. Rate shall be inclusive of fixing with

using the template as per supplier's specification.

18 providing and fixing Inter Lock [Kadaka lock] in

doors with necessary screws and as per drawing,

complete as approved by architect or engineer in

19 providing and fixing S.S. Pipe Handle for door 30 Cm

size o ASIS 316 Grade finish push -pull handles in

Item Description of Item (with brief specification Quantity Unit Rate In Amount

No and reference to book of specifications) figures

pair of two, with necessary screws etc. Complete, as

per drawing as approved by architect or engineer in

charge. Two pieces of handle shall be considered as

one no. for measurement & payment.

20 Providing & fixing 75 mm S.S. 316 satin finish baby

latch (kitch or equivalent approved make ) with

indication of occupancy ( flat / round ) of kitch of

equivalent with necessary screws etc. Complete as

approved by Architect or Engineer-in- charge with

indication of occupancy.

21 Providing & fixing 75 - 100 mm white PVC door

buffer with necessary screws etc. Complete as 18.00 NOS 40.000

approved by Architect or Engineer-in-charge.

22 Providing fabricating, erecting and fixing of M.S.grill,

fabricated from m.s. plat, angles, tees, spacebar,

round bar, pipes etc. complete as per Architect detail

& Drawing including applying one coat of red oxide 550.00 KG 108.000

& two coat synthetic enamel paint etc complete. As

per Architect instructions and drawing or as directed

by engineer in charge.

23 providing and fixing stainless steel railing made from

anticorrosive 304 grade s.s. pipe of 50mm dia (16

gage) as hand rails.s. 304 grade baluster as vertical

support fixed in r.c.c. slab at 1.00 T0 1.20 mt c/c and 4.00 RMT 2402.840

height should be 900 mm including accessories as

per detail drawing as directed etc complete as

approved by engineer in charge

24 Providing 10mm thick cement plaster in single coat

on brick/concrete walls for interior plastering upto

floor two level and finished even and smooth in

(i)Cement mortar 1:3 (1-cement:3-sand).

25 Providing 15mm thick cement plaster in single coat

on Rough (Similar)side of single or half brick walls

for interior plastering upto floor two level and 99.00 SMT 163.390

finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand)

26 Providing and applying 20mm thick sand faced/mala

cement plaster on walls upto required height above

ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

27 Finishing wall with water base primer (one coat) and

weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered

materials.etc complete.

28 Wall painting (two coats) with plastic emulsion paint

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

29 Wall painting (two coats) with plastic emulsion paint

of approved brand and manufacture on ceilings and 423.00 SMT 87.830

sloping roof to give an even shade including

Item Description of Item (with brief specification Quantity Unit Rate In Amount

No and reference to book of specifications) figures

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

30 P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

31 Providing and laying Vitrified tiles 8 to 10 mm thick

24'' x 24'' in dedo on 10mm thick cement plaster 1:3

(1-cement : 3 coarse sand) and jointed with white

32 P & L 600 x 1200 vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

33 Providing and laying polished Kota stone slab

flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5

(1-Lime putty :1.5 - coarse sand) laid over and 11.00 SMT 1008.790

jointed with grey cement slurry mixed with pigment

to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

34 Providing and laying Vitrified granite tiles 8mm to

10 mm thick in skirting risers of steps and dado on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse 28.00 SMT 1576.630

sand) pointing in white cement and jointed with

white cement slurry.

35 Providing & fixing granite stone average 18 mm thick

(16-18 mm) machine-cut & machined polished stone

in treads of steps, sill, copings, parapet top, window

sill, planter top, and such other locations like Goda

kabat, laid on 20 mm(average) thick cement mortar

1:4 (1 cement:4coarse sand) and jointed with Super

flex guranted fixing solution by kerakoll mixed with

pigment to match the shades of the slabs, including 103.00 SMT 3531.000

rubbing and polishing complete. The Stone used

should be in one single long piece up to 3000 mm as

per drawing or as directed by Engineer-in-charge.

The exposed projected edges shall be of uniform

thickness and of uniform projection including

molding , chamfering, rounding, polishing complete.

as directed by EIC.

36 Providing & fixing sandwich type average 18 mm

thick (16-18 mm) machined polished GRAINITE

stone molded door frame of inner trip 130mm

X18mm wide and outer trip 150mm X 18mm wide 124.00 RMT 1102.000

jointed with Super flex guranted fixing solution by

kerakoll mixed with pigment to match the shades of

the slabs, including rubbing and polishing complete.

Item Description of Item (with brief specification Quantity Unit Rate In Amount

No and reference to book of specifications) figures

The Stone used should be in one single long piece as

per drawing or as directed by Engineer-in-charge.

The exposed projected edges shall be of uniform

thickness and of uniform projection including

molding , chamfering, rounding, polishing complete

as directed by EIC.

37 Providing and laying cement concrete flooring 1:2:4

(1- cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) laid in one layer and 250.00 SMT 296.030

finished with a floating coat of neat cement. (A)

38 Providing and laying broken china mosaic flooring

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

creme out up to surface using white cement

including rounding off junctions and extending them

up to 15 cm along the wall, clearing with water and

oxalic acid etc. as directed.

39 Providing and fixing up to 1500 mm x 600 mm

partitions of 18mm thick (16-18 mm) polished

granite stone, in walls in CM 1:2 including making

zaris 25 mm deep, fixing and making good all around

and both side mirror polishing to granite stone,

complete as per drawing and directed by engineer

and architect. The rate shall includes rounding,

champhering and polishing of edges.

40 Providing erecting and fixing double coated ISI water

tank of required capacity each with all necessary 3000.00 LITER 3.910

fittings and connection etc. complete on terrace.

41 providing and fixing (A) White glazed vitreous

chinaware extended wall mounted cantilever type

European type water closet with Hydrolic seat cover,

with (B) flushing tank constellation cistern with

cistern fittings, CI chair bracket with rag bolt and GI

12mm rag bolt with nut and metal washer etc.

including supply and fixing of (C) 1 no CP heavy duty

angle cock with CP wall flange with CP brass inlet

connection with integral P or S trap including cutting

and making good the wall and floor as under with

supported on CI wall brackets and (D) flush cock

mm etc. complete to the satisfaction of EIC.

42 providing and fixing (A) white glazed vitreous

chinaware European type water closet with seat

cover, with , CI chair bracket with 12mm rag bolt nut

and metal washer etc. including supply and fixing of

(B) 1 no CP heavy duty angle cock with CP wall

flange with CP brass inlet connection with integral P

or S trap including cutting and making good the wall

and floor as under with supported on CI wall

brackets and (C) flush cock etc. complete to the

satisfactionof EIC

43 providing and fixingProviding and fixing washbasin

with single hole for pillar tap with C.I. or M.S.

brackets painted white including sutting holes and 5.00 NOS 3745.000

making good the same including fittings.(a) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm

Item Description of Item (with brief specification Quantity Unit Rate In Amount

No and reference to book of specifications) figures

size. (i) In white colour. (b) 32mm CP cast brass

bottle trap heavy casted, with 250mm long wall

connection pipe and wall flange with rubber adopter

for waste connection and one 40mm dia waste

coupling. (c) 1 no heavy quality CP brass angle cock

with wall CP flange (d) 15 mm size. pillar cock with

fitting complete. (e)Providing and fixing M.I. fisher

union for washbasin or sink. 32mm dia.. the

supporting bracket shall be painted with 3 coats of

approved paint of approved shade etc complete

44 providing and fixing screw down brass chromium

plated heavy quality two way bib-tap on water

supply pipe lines of 15mm dia with or with extension 5.00 NOS 2553.000

piece but with a flange etc. complete to the

satisfaction of EIC.

45 providing and fixing 15 mm knob cp brass heavy

quality wall or floor mounted sink tap, with cp wall

flange, casted spout of three way etc. complete to

the satisfaction of eic.

46 Providing and fixing 600mm x 450mm bevelled edge

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

47 Providing and fixing C.P. brass towel rail comlete

with C.P. brass brackets fixed to wooden plugs with 5.00 NOS 610.320

C.P. brass scews.(B) 600mm x 20mm size.

48 providing and fixing ss or brass chromium plated

double robe hook as per the design and 2.00 NOS 978.000

specifications etc., complete to the satisfaction of eic.

49 Providing and fixing toilet paper holder.(A) C.P.

50 providing and fixing hand shower (health faucet)

with cp flange with 8 mm dia., 1 m long pvc tube and

wall hook with fitting . as approved by the

51 Providing and fixing Urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

52 providing and fixing to wall, ceiling and floor, SWR

quality, heavy duty 6KG/RMT pvc pipes of finolax /

astral or equivalent make as approved by eic,, open

laid for soil / waste / rain water etc complete, with

necessary specials, bends, such as Y junction T

junction (both single and double) including plugs,

shoes, cowls flange compression type fittings, wall

clips, in proper line and level with necessary support

like split clamps of chilly make 3mm minimum 105.00 RMT 427.000

thickness fixed with approved anchor fasteners ,RCC

or brick pedestals or battens if necessary to wall,

ceiling and floor, open laid complete jointing with

suitable grade of good quality solvent cement (as

recommended by the manufacturer) including

testing, cutting, making good the wall, ceiling and

floor, etc complete to the satisfaction of EIC of the

following OD. 110 mm 6 Kg.F/cm

53 providing and fixing to wall, ceiling and floor, SWR 30.00 RMT 280.000

Item Description of Item (with brief specification Quantity Unit Rate In Amount

No and reference to book of specifications) figures

quality, heavy duty 6KG/RMT pvc pipes of finolax /

astral or equivalent make as approved by eic,, open

laid for soil / waste / rain water etc complete, with

necessary specials, bends, such as Y junction T

junction (both single and double) including plugs,

shoes, cowls flange compression type fittings, wall

clips, in proper line and level with necessary support

like split clamps of chilly make 3mm minimum

thickness fixed with approved anchor fasteners of

HILTI equivalent ,RCC or brick pedestals or battens if

necessary to wall, ceiling and floor, open laid

complete jointing with suitable grade of good quality

solvent cement (as recommended by the

manufacturer) including testing, cutting, making

good the wall, ceiling and floor, etc complete to the

satisfaction of EIC of the following OD. 75 mm

54 providing and fixing to wall, ceiling and floor, SWR

quality, heavy duty 6KG/RMT pvc pipes of finolax /

astral or equivalent make as approved by eic,, open

laid for soil / waste / rain water etc complete, with

necessary specials, bends, such as Y junction T

junction (both single and double) including plugs,

shoes, cowls flange compression type fittings, wall

clips, in proper line and level with necessary support

like split clamps of chilly make 3mm minimum

thickness fixed with approved anchor fasteners of

HILTI equivalent ,RCC or brick pedestals or battens if

necessary to wall, ceiling and floor, open laid

complete jointing with suitable grade of good quality

solvent cement (as recommended by the

manufacturer) including testing, cutting, making

good the wall, ceiling and floor, etc complete to the

satisfaction of EIC of the following OD. 160 mm

55 Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

56 Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

57 Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

Item Description of Item (with brief specification Quantity Unit Rate In Amount

No and reference to book of specifications) figures

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

58 Providing laying and jointing in true line and level

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

59 providing and fixing cast iron steps of size 500mm x

150mm x 22.5mm and painting with two coats of

Anti- corrosive paint etc.complete. as per architect

60 Providing cement vata (10 cm x 10 cm size) quarter

round in cement mortar 1 :1 including neat cement

finishing watering etc. complete as per architect

61 Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm length,30cm

height and 15cm thick of M200 grade concret as per

approved design and including excavation for fixing

in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

62 Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming

to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

63 Constructing sandwitch platform ofn18mm thick

polished black granite at top and 25mm thick kota

stone slab using cement mortar 1:3 for sandwich and

fitting at bottom & edges with water proof rigid

adhesives including macking necessary grooves in

walls with vertical kotastone 30mm X 2no sandwitch 7.00 SMT 3192.000

thick every 60cm center to center including alll

labour material of approved quality incl. full

moulded round front edge fixed in wall for partition

and jointed with grey cement slurry including

rubbing and polishing etc. complete

64 Providing and fixing Gun metal check or non-return

fullway wheel valve.(E) 40mm dia.

65 Providing and fixing Gun metal check or non-return

fullway wheel valve.(C) 25mm dia.

66 Providing and fixing PVC SWR Nahni Trap IS

for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing design

with C.I. screwed down or hinged grating including 15.00 NOS 726.000

the cost of cutting and making good the walls.e As

per Architect instructions and drawing or as directed

by engineer in charge.

67 Providing and fixing ball cock of approved. quality as

directed.(A) Copper Metal 50mm dia

68 Providing and fixing in position cowel went to 4.00 NOS 389.150

Item Description of Item (with brief specification Quantity Unit Rate In Amount

No and reference to book of specifications) figures

pipes.(B) 75 mm dia.

69 Providing and fixing in position cowel went to

pipes.(B) 100 mm dia.

70 Providing and fixing single layer waterproof gypsum

board 12.5 mm thick of the make Newgood Group

Co. Ltd. Or equivalent & Newgood Group Co. Ltd.

company sections using waterproof board of size

1220 mm x 1830 mm x 8.0 mm suspended by G.I

suspender of size 25 mm x 3 mm with intermediate

channel of size 18 mm x 40 mm x 0.80 mm at

mm center to center ceiling section of size 40 mm x 260.00 SMT 600.940

35 mm x 0.55 mm at 457 mm center to center and

perimeter channel A of size 20 mm x 27 mm x 30 mm

x 0.50 mm at edges & drops including paper tap sand

soffit cleat, anchor fastener, scotch bolt connecting

cleat joining compound top coat on ceiling including

making necessary opening for light fitting, diffuser

etc. complete as per detail drawing as directed.

71 Providing and fixing screw down bib taps of

following size.(B) Brass chromium plated screws 3.00 NOS 184.980

down Bib Tap. (i) 15mm dia.

72 Providing and fixing pillar tap, capstan head, screw

down high pressure with screws, shanks and back 5.00 NOS 305.670

nuts. (i) 15mm dia.

73 Providing and fixing brass screw down stop tap.(C)

74 Providing and fixing SS Sink Glosy ASIS 304 Grade x

1mm thick with over all size 610x460 mm & bowl

size 560x410x200 with single hole for pillar tap

fixing in sandwitch platform including cutting holes 3.00 NOS 3012.000

and making gods the same, necessary fixtures,

connections and waste pipes with c.p. pillar cock

15mm heavy duty swan neck etc complete

75 Providing & fixing granite stone average 18 mm thick

(16-18 mm) machine-cut & machined polished stone

in Goda kabat, laid on 20 mm(average) thick cement

mortar 1:4 (1 cement :4 coarse sand) and jointed

with Super flex guranted fixing solution by kerakoll

mixed with pigment to match the shades of the slabs,

including rubbing and polishing complete. The Stone 165.00 SMT 2964.000

used should be in one single long piece up to

mm as per drawing or as directed by Engineer-in-

charge. The exposed projected edges shall be of

uniform thickness and of uniform projection

including molding , chamfering, rounding, polishing

complete. as directed by EIC.

76 Dining Table

Providing and Fixing of dining table, The table size

available in 1500mm x 900mm x 750mm. Table leg 3.00 Nos. 13500.000

material use in solid wood and size of the solid wood

is 67mm x 67mm. as shown in image.

77 VIP Dining Table Chair :

Providing and fixing of godrej make dining chair, The

chair size available 980mm x 440mm x 540mm. Back

side leg material use laminate solid wood-22mm.

Lamination use -38mm x 28mm. Front leg material

solid wood use 1.5 x 1.538 x 38 mm solid wood. As

Item Description of Item (with brief specification Quantity Unit Rate In Amount

No and reference to book of specifications) figures

shown in image.

78 3 SEATER SOFA :- Manufacturing and Supply of

Three Seater Sofa

two seater sofa Size 2131(L) x 851(D) x

1. 50mm thick 40 Density + 50 mm Thik Super Soft

Sleep well Feather foam for Seat & back

2. 25mm thick 32 Density sleep well (Feather foam)

Super Soft black(Velvet) Foam and 300 GSM Fiber

for seat and back to be pasted over the 100mm thick 5.00 Nos. 25750.000

foam with good quality of Adhesive (Fevicol)

3. 12mm plywood and 19mm plywood (MR-303)

semi waterproof

4. Teak Wood Use In Sofa Framing

5. Zic Zac Spring + Belt Use in Seat.

6.upholstered in selected color at the time of

execution by Engineer (Max 700/- Per Mtr.)

79 2 SEATER SOFA :- Manufacturing and Supply of Two

Two seater sofa Size 1519(L) x 851(D) x

1. 50mm thick 40 Density + 50 mm Thik Super Soft

Sleep well Feather foam for Seat & back

2. 25mm thick 32 Density sleep well (Feather foam)

Super Soft black(Velvet) Foam and 300 GSM Fiber

for seat and back to be pasted over the 100mm thick 5.00 Nos. 22750.000

foam with good quality of Adhesive (Fevicol)

3. 12mm plywood and 19mm plywood (MR-303)

semi waterproof

4. Teak Wood Use In Sofa Framing

5. Zic Zac Spring + Belt Use in Seat.

6.upholstered in selected color at the time of

execution by Engineer.

80 CENTER TABLE

Providing and Fixing of Center Table, The table size

is 900 mm x 600 mm x 510 mm. 10 mm tampered

glass top and 8 mm tempered bottom glass for

storage option and frame should be make from 304 5.00 Nos. 3000.000

gread stainless steel pipe of size 25mm x25mm .

glass should be fixed with clear solution of

pedilite.legs bottom with 25mm pvc buffer. The Load

bearing Capacity -20 kg.

81 SINAGE ( 100x300 )

Providing and fixing signage board made from

acrylic sheet in size 100x300 and fixed on door wall 11.00 No 850.000

with screw and mirror cap as per design and

direction of engineer -in-charge and consultant.

82 Roll-up-Blind Blinds

Providing and fixing roller-up- blinds cutting as per

necessary size, cutting and fitting with aluminum

powder coated slim line channel with imported

mechanism, pattern trade including runners, spacer

hangers and fabrics per size of window, bottom

weight should be zinc coated (16 gauge to be used).

Including fitting to old window and labour etc.

complete as per detail instruction of engineer-in

charge and consultant.

83 WORK TABLE TYPE -2 :- work Table - Main Table

Top -2100mm L x 900mm D x 740mm Ht, side

Item Description of Item (with brief specification Quantity Unit Rate In Amount

No and reference to book of specifications) figures

Storage of Size - 1000mm L x 450mm D x 700mm Ht

having 3 drawers and shutter storage /Top :- 18mm

MR grade commercial plywood (make green lam/

century) finished with 1 mm thick wooden laminate

as per selecttion by architect. & 2mm Thk PVC

Lipping / Understructure :- /Worktop Supported on

50x50mm Metal Powder Coated Square Tubular

Legs as per selection by the architect & can be

customized as per requirements of architect. as per

selection by the architect & can be customized as per

requirements of Engineer.

84 providing and fixing lounge sofa chair as per photo

with s.s. frame structure, pu form and pu leather as 10.00 No 4950.000

85 Mattresses of sleep well , product name inspire type -

900 x 1800x 115 Providing Bonnel type mattresses

of 900 x 1800x 115 with high quality sleepwell form

as mentioned in specification with tempering and

edge support having 4 overlays for camfer system of

polypzopylene mesh insulator, 10 to 15 mm thick

high density natural fabric pads in both sides, 6 to 8 3.00 Nos. 5250.000

mm cotton fele on both sides and exotic chain stitch

deep qualiting with 5 to 20 mm high density polyare

thane foam on both sides . The inspire tapestry of

approved design and color by architect in charge .

above work with include trasportation and all taxes

include complete.

86 Providing double bed Jaipuri Rajai of 3'6"x 6’6” with

cotton infill & even stitching having four sides 3.00 No 1100.000

borders and as approved by architect in charge.

Rupees Forty Nine Lakh Six Thousand Eight Hundred Forty Three Paise Forty Eight Only

I/We am/are willing to carry out the work at… ...................... % above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of In In

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

(C)Net Tendered Amount (A-B) (in figure) ………………………………

1. The Contractor shall exhibit a board with brief details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R. NO.:

MIS102010/17/K1 Dated:30/07/2018 as stated in S.O.R. therefore in R.C.C. items where there is a change

as per actual mix design the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Sr. Divisional Accounts Officer Executive Engineer

Mkt. H.W. Sub Dn. No-1 Sipu Project Division Sipu Project Division

Mukteshwar Palanpur Palanpur