VYTTILA FLYOVER BEAUTIFICATION-PHASE1

CIVIL WORKS

OD348807/2025-2026 Dismantling and stacking with in 50 metres lead, existing barricades ,2.2 mtr length with 1.5 inch round pipe and 1 inch vertical steel plates with total height of barricade 90 cm. posts or struts including all earth work and dismantling of concrete etc. in base of :R.C.C.

10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (for Ballustrades & Tree element tructures and side closing works at ends)

OD349032/2025-2026 Providing and fixing Tree element structure with 3 mm CNC cutting (Design laser cutting) mild steel sheets in steel to the frame of size approx. 10ft x 8 ft as per required design and shade with powder coating finish . Rate as per quote received from CNC vendors in kochi .

2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

OD349660/2025-2026 Taking out existing Hand rail pipes ( external work) and Re fixing as per drawings including excavation and refilling trenches after taking out the pipes, manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer- in- Charges: including cutting and welding 15 mm to 40 mm nominal bore

OD351350/2025-2026 Providing and fixing 2 mm thick Perforated sheet (20mm hole), with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junction and corners, 25 mm dia pulley, 40x40x6 mm angle and T-iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer. (OD BASED ON ITEM 10.4)

OD375989/2025-2026 Finishing with Artistic painting on perforated sheets with Direct-to-Metal (DTM) Polyurethane (PU) Enamel Paint with high gloss finish applied as per manufacturer's specifications including appropriate priming coat, preparation of surface,including scaffolding and other vertical Access equipments up to 3.5 mtr height etc. complete.On steel work as per the instruction of Engineer in charge.

OD352207/2025-2026 Finishing flyover component structure surfaces with SOLID COLOUR painting with one coat of suitable primer and two coat of superior quality exterior acrylic emulsion JSW Profect Regal Interior/Exterior Paint or equivalent as per required colour, shade and design based on architectural drawings including labour and materials, machinery, pressure wash cleaning, surface preparation, scaffolding, generator rent ,fuel , crane/boom lift & water charges etc. all as per the direction of engineer in charge.

OD352361/2025-2026 Finishing flyover component structure surfaces with ARTISTIC painting with one coat of suitable primer and two coat of superior quality exterior acrylic emulsion JSW Profect Regal Interior/Exterior Paint or equivalent as per required colour, shade and design based on architectural drawings including labour and materials, machinery, pressure wash cleaning, surface preparation, scaffolding, generator rent ,fuel , crane/boom lift & water charges etc. all as per the direction of engineer in charge.

OD352513/2025-2026 Finishing pillar bottom floor area with ARTISTIC painting with one coat of suitable primer and two coat of superior quality exterior acrylic emulsion JSW Profect Regal Interior/Exterior Paint or equivalent as per required colour, shade and design based on architectural drawings including labour and materials, pressure wash cleaning, surface preparation, generator rent ,fuel & water charges etc. all as per the direction of engineer in charge.

2.1.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD352887/2025-2026 Cleaning the surface and removing dirt,dust,greese,oil,algae,fungus including washing the surface with the help of required srubbers and cleaning with machine operated water jet etc. Without causing any damage to the existing structure.

OD352961/2025-2026 Providing and fixing 2 mm metal sheet with frame of size 7.2 x 1.2 with CNC cutting fitted with MS channel supports and installing name"VYTTILA" letters of size 70cm made with GI pipes covered by SS 304 grade sheets in to the metal sheet as per architectural details with Standared quality materials.

OD353839/2025-2026 Floor painting with floor emulsion paint of approved brand and manufacture of required colour to give an even shade including primer: Two or more coats on New work

13.111.2 Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).

13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

16.83 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

15.60 Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

OD432926/2025-2026 Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of Stone-aggregate, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.)

OD354432/2025-2026 55.16. Providing and fixing guard post Providing and fixing guard post of size 200mmx200mm, 1400mm long, 800mm above ground level and 600mm below GL. casted in M20 Grade concrete reinforced with 4 nos of 8mm dia longitudinal bars and 6mm dia stirrups @ 100mm c/c, firmly fixed in position by means of foundation of size 0.5mx0.5mx0.7m in M15 grade concrete below ground level including painting 2 coats on exposed surface with synthetic enamel paint as per required colour and shade with lighting provision-LED surface top light

ELECTRICAL WORKS

OD435700/2025-2026 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal) (od based on ITEM NO 14.15.3 of Electrical work)

OD435701/2025-2026 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm· dia (OD-63 mm & ID-51 mm nominal) (od Based on ITEM NO.14.15.1 Electrical work)

Please Enable Macros to View BoQ information