CA NO GE(N)AMB-54/2025-26 REPARI/REPLACEMENT MAINT WORK INCLUDING REP/REPLACEMENT TO JOINERY, PLUMBING, SANITARY, PLASTERING AND OTHER ALLIED CONNECTED BLDG REPAIR WORK IN OFFRS AND OTHER AREAS OF AGE B/R-II UNDER GE (NORTH) AMBALA CANTT

Amount

Schedule 'A' Part-I (B/R itmes) Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key scrubbing down with water, etc. ,complete, all as specified and as directed.

Dismantling of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar, etc. but excluding ashlar facing, dressed stone work and precast concrete articles ,complete, all as specified and as directed..

Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 ,complete, all as specified and as directed..

Material and labour for brick work with sub class B bricks old size bricks, straight or curved on plan any radius in cement mortar 1:4 in half brick thick wall ,complete, all as specified and as directed..

Material and labour rendering 15 mm thick on brick work or concrete wall surfaces in cement mortar 1:4 including mixing water proofing compound @ 2% by weight of cement or as per manufacturer's instruction and finished fair and even without using extra cement ,complete, all as specified and as directed.. ( Note- The cost of providing WPC shall be included in quoted rate under this item )

Material and labour for rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement ,complete, all as specified and as directed.

Material and labour for rendering 05 mm thick on fair faces of brick work or concrete ceiling surfaces, chajjas, etc. in cement mortar 1:3 and finished even and smooth without using extra cement ,complete, all as specified and as directed.

Material and labour for preparation of new plastered/unplastered surfaces of walls, chajjas, roof projection, etc. and applying two coats of cement base paint over a coat of alkali resistant primer ,complete, all as specified and as directed.

Material and labour for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of oil acrylic distemper with painting roller over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, ,complete, all as specified and as directed.

Material and labour for preparation of new plastered/unplastered surfaces and applying three coats of white lime wash on surfaces of ceiling, chajjas, roof projection etc., ,complete, all as specified and as directed..

Material and labour for rough cast plaster complete as specified in SSR Part-I, clause 14.22 shall consisting of following:- firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine stone aggregate of size between 6 to 12 mm as per the texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, ,complete, all as specified and as directed..

Supply and fixing as in repair mild steel powder coated wooden finish curtain rod 25mm dia fixed with and including decorative brackets, two lotto for each rod length at both end, etc. fixed with stainless steel screws ,complete, all as specified and as directed..

Supply and fixing PVC connections 15 mm size and 600 mm of length with PTMT nuts and PVC washers on both ends as in repair complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store ,complete, all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store ,complete, all as specified and as directed.

Material and labour for galvanised iron tubing 15mm bore, ISI marked, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors ,complete, all as specified and as directed..

Material and labour galvanised iron tubing 20 mm bore, ISI marked, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors ,complete, all as specified and as directed..

Supply and fixing as in repair bib tap 15mm bore fancy type brass chromium plated with long body, ISI marked, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule ,complete, all as specified and as directed..

Supply and fixing as in repair fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, ISI marked, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe ,complete, all as specified and as directed..

Material and labour for 75mm bore PVC (SWR) multi-floor trap, plain with grating including jointing with solvent cement as in repair ,complete, all as specified and as directed.

Supply and fixing as in repair 15mm bore, cast copper alloy, fancy type, chromium plated, ISI marked, stop valves screwed down, high pressure with capstan head, screwed both ends for iron pipe or for unions ,complete, all as specified and as directed..

Supply and fixing as in repair brass chromium plated tubular towel rail, 20mm dia, 60cm long between flanges ,complete, all as specified and as directed..

Supply and fixing as in repair 15mm bore cast copper alloy chromium plated angular stop valves, ISI marked, screwed down, high pressure with capstan head, screwed down both ends for iron pipe or for unions ,complete, all as specified and as directed.

Supply and fixing of vitreous china wash hand basin white with pedestal, ISI marked, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling chromium plated and 32 mm dia PVC waste pipe including fixing of waste fitting, etc as in repair ,complete, all as specified and as directed.

Supply and fixing as in repair vitreous china squatting pan, Orissa pattern, 580 mm x 440 mm size, white colour with integral foot rest and PVC SWR 'P' or 'S' trap of pressure rating 6 Kg per square cm complete including provision of cement concrete bedding, connection to trap, outgoing flushing pipe, anti syphonage pipe, etc. ,complete, all as specified and as directed.

Supply and fixing in replacement 10 litre PVC valveless syphonic action type flushing cistern with inlet ball valve float, handle, etc. with and including brackets, flush pipe, etc. and connections of flush pipes to WC ,complete, all as specified and as directed.

Supply and fixing for vitreous china wash down water closet pan (pedestal pattern), white (including fixing bolts but excluding flushing cistern and flush pipe) including plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminium hinges device as in repair ,complete, all as specified and as directed.

Supply and fixing of brass chromium plated toilet paper holder complete fixed to wall as in repair ,complete, all as specified and as directed..

Supply and fixing of sinks with drainage board made out of stainless steel 1mm thick sheet for kitchen with plugs, waste pipe, brass chromium plated coupling and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm as in repair ,complete, all as specified and as directed.

Supply and fixing of plastic water closet seat cover , white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hinging device as in repair ,complete, all as specified and as directed..

Supply and fixing of PVC cabinet type looking mirror size 450 mm x 600 mm box type including all necessary items as in repair ,complete, all as specified and as directed..

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,complete, all as specified and as directed..

Demolition of cement concrete of any description ( incl floor tiles and or PCC below tiles) in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for Non Skid coloured ceramic tiles joint free premium/1st quality 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 ,complete, all as specified and as directed

Material and labour for glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/skirtings/dados of size 300x 600x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on faces of brick / concrete surfaces in cement mortar 1:4 ,complete, all as specified and as directed..

Material and labour for vitrified ceramic tiles double charged,1st quality,(square/ rectangular), 9 to 10mm thick, area of each tile exceeding 0.36 sqm and not exc 1.00 sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes ,complete, all as specified and as directed..

Material and labour for vitrified ceramic double charged light shade tiles, 1st quality, of same description as of floor tiles in serial item No. 37 above but 100mm to 150mm height as in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including rendering 10 mm thick in cement mortar (1:4) ,complete, all as specified and as directed..

Material and labour for 25 mm thick PCC 1:2:4, type B0 as in sub base of floor (using 12.50mm graded crushed stone aggregate), finished even & fair without using extra cement ,complete, all as specified and as directed.. Note- This item shall not be executed in the location, where dismantling of tiles only have been done.

Material and labour for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in horizontal surface of steps, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 including rounding of front edge/exposed edge ,complete, all as specified and as directed..

Material and labour for rounding to edges of stone slab or granite, both edge with grinder as in kitchen slab, steps and similar situations etc. ,complete, all as specified and as directed..

Dismantling of boarding of any type/ size as in CB / Wardrobes or fixed in any position including hardware (if any), etc. ,complete, all as specified and as directed..

Supply and fixing of 18mm thick lead free PVC celuka ply of both side plain white colour having density 600 Kg/Cum, fixed with screws, solvent cement / adhesive to make kitchen / bed rooms cabinet sides, top and bottom and shelves inside the cabinets complete all as per manufacturer's specifications/ instructions ,complete, all as specified and as directed..

Supply and fixing of Continuous (piano) hinges, width of flaps 30mm mild steel, bright finish or electro galvanised ,complete, all as specified and as directed..

Supply and fixing of 40mm dia brass polished cupboard knobs fixed with nut, screws and washer of stainless steel ,complete, all as specified and as directed..

Supply and fixing of magnet catcher fixed in cabinet shutter (one portion) and wooden frame (other portion) with screw ,complete, all as specified and as directed..

Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish ,complete, all as specified and as directed..

Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish ,complete, all as specified and as directed..

Taking down shutters of any description area exceeding 01 sqm but not exc 2 sqm each and removing the same from site ,complete, all as specified and as directed..

Material and labour for factory made 2nd class hard wood 35 mm thick plain framed panelled shutter( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both face . The size of rail and style as per IS:1003 (Part-1) kiln seasoned and chemically pressure treated ,complete, all as specified and as directed..

Material and labour for factory made 35 mm thick 2nd class hard wood glazed and skeleton shutters,open rebated and prepared to receive glass , gauze etc. (without sash bars) ,edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I, Section-8, clause 8.24 (a) (wood shall be kiln seasoned and chemically pressure treated) ,complete, all as specified and as directed..

Supply and fixing of stainless steel wire cloths 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple ,complete, all as specified and as directed..

Supply and fixing as in repair stainless steel wire cloths 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple ,complete, all as specified and as directed..

Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on single side used instead of plain colour PVC sheet reinforced with MS square tube, edges will be painted to match with prelaminated sheet and fixed in opening ,complete, all as specified and as directed..

Supply and fixing of factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing ,complete, all as specified and as directed..

Supply and fixing of factory made single extruded WPC (Wood PolymerComposite) solid door/ window/ Ceosetory windows & other frames/chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast of required dia and length complete all as specified and directed. NOTE : - (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. (ii) Material manufacture test certificate should be provided before execution of work

Supply and fixing of factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded ( Jointless ) door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with full body threaded star headed counter sunk S.S screws, complete all as per specification & drawing complete all as specified and directed

Material and labour for rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixing conforming to Fe-290-W (Gde E-165) quality 'A' ,complete, all as specified and as directed..

Material and labour for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate as in holdfasts ,complete, all as specified and as directed..

S&F double shutter steel window box type ERW hollow P section comprising of glazed and gauged skeleton shutter fabricated from following sections :- (a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter ). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces . (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf . (c) Vertical mullion shall be ERW hollow T -section of size 60 x 25 mm made from 1.25 mm thick MS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings : i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt stove enamelled 150mm long- 2 Nos per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 No per leaf vi) Pintal hinges 12 x 75 mm - 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c welded to frame . (viii) Two coat of Synthetic enamel paint over one coat of red oxide primer. (ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws . (x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window. (xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed. Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above. (iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and steel window frame glazed with putty or fixed with beads ,complete, all as specified and as directed..

Material and labour for sheet glass 3.0mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters ,complete, all as specified and as directed..

Supply and fixing of 150 mm long aluminium handle, cast type, anodised ,complete, all as specified and as directed..

Supply and fixing of 200 mm long, aluminium anodised, barrel tower bolts of extruded section ,complete, all as specified and as directed..

Supply and fixing of 250mm long aluminium alloy, anodized, sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloys to door shutter ,complete, all as specified and as directed..

Supply and fixing of butt hinges 100mm long of stainless steel, medium weight, ,complete, all as specified and as directed..

Supply and fixing of mild steel helical door spring 150 mm long fixed with screws to wooden chowkats or welding to steel chowkats, complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ,complete, all as specified and as directed..

Material and labour for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer ,complete, all as specified and as directed..

Supply and fixing of 32 mm dia PVC waste pipe of standard length for wash hand basin / Kitchen sink etc as in repair ,complete, all as specified and as directed..

Supply and fixing of brass chromium plated double lever basin mixer without popup and 450 mm long braided hoses for 15 mm bore pipe as in repair ,complete, all as specified and as directed..

Supply and fixing of corner Glass shelf 300 mm (with brass bracket) including fixing with brass screws to wall complete fixed as in repair ,complete, all as specified and as directed..

Supply and fixing as in repair 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed..(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

Supply and fixing as in repair 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, ,complete, all as specified and as directed..

Supply and fixing as in repair 75mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

Supply and fixing as in repair 75 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534)

Supply and fixing , water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including disconnecting and dismantling of existing water tanks and removing from site all as specified in SSR Part–I , ,complete, all as specified and as directed.. Note : - The colour of tanks shall be white colour .

Disconnecting existing water tanks of capacity 500 ltr setting aside (or lowering if required) & cleaning and removing all scale and dirt etc from in side of PVC/RCC tanks and mouths of circulating pipe & writing date on cleaning on the tank with synthetic enamel paint not less than 200mm long and 20mm wide of words and reconnecting and refixing of the tank in position to make it operational, complete, all as specified and as directed. NOTE :- (i) The unit rate shall be included cost of small fittings such as elbow, socket, reducer, tee, union, etc. (ii) The whole process of reconnecting and refixing in position after cleaning/after carrying out water proofing treatment shall be done on the same day to ensure uninterrupted water supply to the occupant, if failing so, Rs. 200/– shall be deducted for each tank per day from the contractor due.

Supply and fixing , water storage tank, 1000 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including disconnecting and dismantling of existing water tanks and removing from site all as specified in SSR Part–I , ,complete, all as specified and as directed.. Note : - The colour of tanks shall be white colour .

Supply and fixing as in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) ,complete, all as specified and as directed..

Supply and fixing of 15 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as in repair, ,complete, all as specified and as directed..

Supply and fixing in repairs, stainless steel towel rack size 600 mm long and min width 250 to 300 mm with min 2 hook peg stay at both ends, ,complete, all as specified and as directed..

Cutting chases to brick wall built in cement mortar, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing , steps , cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting not exc 10 cm girth ,complete, all as specified and as directed..

Supply and fixing as in repair mild steel door shutter two leaves with frame of 20 gauge MS sheet (all around) and leaves of 21 gauge MS Sheet (all as per godrej pattern) with three way locking arrangement with brass lock with duplicate key and CP handle including two coats of spray painting over a coat or red oxide primer complete fixed in existing cupboard fixed with necessary nuts, bolts including embedded in PCC 1:2:4 (area of opening shall be measured) ,complete, all as specified and as directed..

Disconnecting existing water tanks of capacity 1000 ltr setting aside (or lowering if required) & cleaning and removing all scale and dirt etc from in side of PVC/RCC tanks and mouths of circulating pipe & writing date on cleaning on the tank with synthetic enamel paint not less than 200mm long and 20mm wide of words and reconnecting and refixing of the tank in position to make it operational, complete, all as specified and as directed. NOTE :- (i) The unit rate shall be included cost of small fittings such as elbow, socket, reducer, tee, union, etc. (ii) The whole process of reconnecting and refixing in position after cleaning/after carrying out water proofing treatment shall be done on the same day to ensure uninterrupted water supply to the occupant, if failing so, Rs. 200/– shall be deducted for each tank per day from the contractor due.

Supply and fixing of brass chromium plated wash hand basin mixer for mixing hot and cold water screwed down for 15mm dia pipe including waste popup with 450mm long braided hoses and all connecting fittings as in repair ,complete, all as specified and as directed.. Make:- Jaquar Cat part No.QQP-7167BPM/Cera Cat part No. F2007461 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.

Supply and fixing of as in repair brass chromium plated concealed stop cock with long shank and wall flange screwed down,high pressure with crutch handle, screwed down both ends for iron pipe or for unions 15mm bore ,complete, all as specified and as directed.. Make:- Jaquar Cat part No.CON-083FTK or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.

Supply and fixing of brass chromium plated wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange without hand and overhead shower as in repair ,complete, all as specified and as directed.. Make :Jaquar Cat Part No FLR-5267N or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.

Supply and fixing of brass chromium plated soap dispenser with glass bottle as in repair complete all as specified and directed.

Supply and fixing of brass chromium plated Towel ring round including fixing with brass screws complete fixed ,complete, all as specified and as directed.. Make : Jaquar Cat Part No : ACN-1121BN or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.

Supply and fixing of brass chromium plated Soap Dish Holder including fixing with brass screws to wall complete fixed as in repair ,complete, all as specified and as directed.. Make : Jaquar Cat Part No : ACN-1131N or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.

Supply and fixing of overhead shower 200mmx200mm square shape single flow ABS body chromium plated with grey face plate with rubit clean system, complete all as specified and directed.

Supply and fixing in repairs of chromium plated overhead shower min dia 80 to 100 mm dia round shape single flow ABS body chrome plated with grey face plate with rubit clean system complete all as specified and directed.

Supply and fixing of brass chromium plated hand shower ( health faucut) with 8 mm dia 1.2 mtr long flexible tube and wall hook with NRV ( back flow preventer )complete fixed to wall complete fixed as in repair ,complete, all as specified and as directed.. Make : Jaquar Cat Part No : ALD577 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.

Supply and fixing of counter top vitreous china wash hand basin white with 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting, etc. as in repair ,complete, all as specified and as directed. Make : CERA Cat part No.S2020102 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.

Supply and fixing of single piece water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, cistern fittings, S or P Trap complete fixed as in repair ,complete, all as specified and as directed.. Make : CERA Cat part No.S1013209 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.

Supply and fixing 5-8mm thick Hollow, profile designer PVC paneling with panel of width 250mm to 300mm fixed to wall/ceiling with screw and rawel plug including PVC beading (U,L section) wherever required.,complete, all as specified and as directed..

Supply and fixing 8-10mm thick flute profile designer PVC paneling with panel of width 250mm to 300mm fixed to wall/ceiling with screw and rawel plug including PVC beading (U,L section) wherever required.,complete, all as specified and as directed..

Note:- Amount of credit of Rs.34,450.00 for retrieved materials is mentioned in Schedule of Credit Page No…123 & 124.. of tender documents in pdf form which will be deducted offline while acceptance of tender.

dhingra builders (BID ID -3475224)

Peerzada And Sons (BID ID -3470209)