Widening and strengthening of Swar Qila Kheda to Bazpur Gadarpur road Uttarakhand border chainage 0.000 to 12.100 Length 12.100 km in Distt Rampur

Amount

Excavation in Soil using Hydraulic Excavator CK 90; Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections. Sr. No. 3.6A Morth Sp-301 (All complete as per E/I) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. Sr. No. 3.17 Morth Sp-305 (All complete as per E/I) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Construction of Embankment with Material obtained from Borrowpits; Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. Sr. No. 3.16 Morth Sp-305...(In non-habitational length) (All complete as per E/I) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Construction of earthen shoulders with approved material obtained from borrow pitswith all lifts & leads, transporting to site, spreading, grading to required (All complete as per E/I) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specifications including premixing the material with water of OMC in mechanical mix (Pug Mill), carriage of mixed material by tipper to site laying in uniform layers in sub-base/base course on a well prepared under base and compacting with power vibratory-roller to achieve the desired density including lighting, guarding, barricading and maintenance of diversion etc. Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and applying primer coat with emulsion on prepared surface of granular base including cleaning of roads surface and spraying primer at the rate of 0.60 kg. per sqm using mechanical means. Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and applying tack coat with Bitumen VG-10 using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface.(All complete as per E/I) For BC. Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and laying dense graded bituminous macadam grading-1 with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (All complete as per E/I) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and laying bituminous concrete grading-2 with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (All complete as per E/I) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Including all T&P, Labour, Material, Royalty Tax but excluding GST

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.....Case I- PCC Grade M15 using batching plant & Concrete pump Including all T&P, Labour, Material, Royalty Tax but excluding GST

RCC Grade M-20 in open foundation Structure complete as per Drawing and Technical Specifications. Including all T&P, Labour, Material, Royalty Tax but excluding GST

RCC Grade M-25 for wall & slab etc. Structure complete as per Drawing and Technical Specifications. Spec. 1500, 1700 & 2100) (Sr No. 15.12B) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications Including all T&P, Labour, Material, Royalty Tax but excluding GST

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Sub Struture/Super structure complete as per Drawing and Technical Specifications. Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and laying of filter material with granular material/ stone crust aggregate satisfying the requirment laid down clause 2504.2.2. as per MORTH specification.... Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and laying boulder apron for bed protection with stone boulder of minimum size and weight as per table No1300.1 No gragment weighing not less than 25 kg lag dry complets as per drawing and technical specification clause 1301filter material underneath piching slopes complete as per drawing and technical specification clause 2702 Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing weepholes in RCC abutment wing wall Raft with 100 mm dia P.V.C. down Pipe.extending through the full wirth the strutures with slopes of 1V :20H towards technical specification 614 702 1204 Including all T&P, Labour, Material, Royalty Tax but excluding GST

De-Watering by diesel pumping set of 10 H.P.copacity during the construction of bridge& culvert etc including hite-charges of pumping set and its POL, labour all T&P etc complets in all respect Including all T&P, Labour, Material, Royalty Tax but excluding GST

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. Including all T&P, Labour, Material, Royalty Tax but excluding GST

Brick masonry work in1:3 cement mortar in foundation 7 sub-structure complete excluding pointing and plastering as per drawing and technical specifications Clauses Including all T&P, Labour, Material, Royalty Tax but excluding GST

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation &Sub Structure complete as per Drawing and Technical Specifications. Including all T&P, Labour, Material, Royalty Tax but excluding GST

Supply and laying empty cement bag filling with local sand in both side of river including supply of empty cement bags local sand stiching of bags stacking,laying in position complete as per diraction of Engineer-in-charge Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and Laying Reinforced Cement Concrete Pipe NP4 as per design in Single Row; Laying Reinforced cement concrete pipe NP4 pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . Including all T&P, Labour, Material, Royalty Tax but excluding GST for 600mm dia hume pipe culverts

for 1000mm dia hume pipe culverts

Pointing with cement mortar (1:3) on brick work in substructure.. Morth specification 1300 & 2200 Including all T&P, Labour, Material, Royalty Tax but excluding GST

Hectometer Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixed in position including painting Including all T&P, Labour, Material, Royalty Tax but excluding GST

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixed in position including painting & Printing Etc Including all T&P, Labour, Material, Royalty Tax but excluding GST

Ordinary kilometre Stone ( precast) Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixed in position including painting & Printing Etc Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (TRAFFIC SIGNS - Including all T&P, Labour, Material, Royalty Tax but excluding GST Stop Sign Board at intersection of size 90 cm hight octagonal

T- Junction/ X-Junction Sign Board ( 90 cm eqilateral triangle)

Speed Limit Sign Board (60 cm circular)

Hazard Sign Board ( 30 cm x90 cm rectangular)

Single side CHEVRON Sign Board ( 50 x 60)

Double side CHEVRON Sign Board ( 155x60)

Direction and Place Identificationn Signs board

Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings. Including all T&P, Labour, Material, Royalty Tax but excluding GST

Centre/Edge Lines :- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. (All complete as per E/I) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Supply and fixing and erecting of built up Overhead Structure 12.00M -15.00Mts span comprising of Two vertical post of 6.00 m. Height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm MS plate at bottom. The horizontal truss Shall comprising of 50mm dia heavy class MS pipe and 40mm dia heavy MS pipe as bracing and 10mm MS plats at bottom for fixing two vertical post as per structure design and drawing with one of steel primer and two coats of synthetic enamel paint the work includes construction of R.C.C foundation of size 0.90x0.90 mts of required depth as per site condition note less than 1.80 mtr. depth) for 10 built up structure including earth work in excavation 100mm thick lean concrete in 1:4:8 (cement coaurse sand and 40 mm gauge SB) RCC with 1:2:4 (cement course sand and 20mm stone grit) including supply and fixing of 25 mm dia Foundation Bolts 600mm long as per provision of structure design including cost of reinforcement & shuttering The lateral vertical clearances and complete installation work shall be as per relavant clause of MORT&H specification section 800 and IRC 67 2010 complete in all respect The Rates shall include cost of design fabrication supply transportation. Local shiting. Eraction of Signage structure using crane inclusive of all taxes royalty etc all T&P machine material and labour, required for proper complation of work as per direction of Engineer-in-charge Including all T&P, Labour, Material, Royalty Tax but excluding GST

Cantilever Sign board :- Supply and fixing Cantilever sign Board Complete as shown in drawings, as per technical Specification Clause 802, and as directed by the E/I complete as per clause 810. (All complete as per E/I) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Supply and fixing of high intensity prismatic retro sign boards made of 2.00mm Aluminum of 4.00mm aluminum composit panel (ACP) face to be fully covered with high intensity prismatic grade retro reflective sheeting in required colourfully processed on pressure sensitive adhesive or equivalent process with text matter and border of same sheeting. Cutting by computerized cutting machine and proccesed with base of aluminum sheet back of base sheet supported with frame of MS angle size 35x35x5mm back frame shall be painted with stove enamel paint with 7 years warranty confirming to IRC specification including design fabrication supply and eraction of the sign board and also including or royalty etc all T&P machine material and labour required for proper completion of work. (size of board 6.10 x 1.83 mtr x 2 nos.) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 Including all T&P, Labour, Material, Royalty Tax but excluding GST

Repeated Bar Marking Providing and laying of hot applied thermoplastic compound 5.0 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing & laying of speed table for desirble speed (40 kmph) (for VR & ODR) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Supply and Fixing of moulded shank cats eyes moulded shank raised pavement marker made of polycarbonate moulded body and reflected panels with micro parismatic lens capable of providing total internal reflection of the light entering the lens face conforming to ASTMD 4280 type H and complaying to specification of categories a of MORTH CIRCULAR NO RW/NH/33023/10-97 DO III DT 11-06-1997. The height width and length shall not exceed 20 mm 150 mm & with minimum reflective area of 13 sqcm. and the each side, slope to the base shall be 35 degree. Fixing will be without nails but using twin polymer shanks using bitumen adhesive on bitumen road as per manufacturs recommnendation including site clearance etc and complete as per direction by rengineer in charge. Rates are included all tax & GST. (Sollar Studs or yellow cats eyes to way AND Red & white two way cats eyes) (All complete as per E/I) FOR SPEED TABLE Including all T&P, Labour, Material, Royalty Tax but excluding GST

Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered,LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providingtotal internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordanceto ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow(amber) as per requirement and typical frequency of blinking is 1 Hz. There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height,width and length of the marker shall not be less than 10 mm x 100 mm x100 mm. Also, the surface diameter ofthe marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5Kilograms. Fixing will be by drilling holes on the road for the shanks to goinside, without nails and using epoxy resin based adhesive and complete as directed by the engineer. Including all T&P, Labour, Material, Royalty Tax but excluding GST

Ist Year Maintainance (@0% of Total Work Amount of S.No. 1 to S.No.47)

IInd Year Maintainance (@0.25% of Total Work Amount of S.No. 1 to S.No.47)

IIIrd Year Maintainance (@0.50% of Total Work Amount of S.No. 1 to S.No.47)

IVth Year Maintainance (@0.75% of Total Work Amount of S.No. 1 to S.No.47)

Vth Year Maintainance (@1.00% of Total Work Amount of S.No. 1 to S.No.47)

M/S KUMAR INFRATECH (BID ID -5739457)

M/S R K CONSTRUCTION (BID ID -5758554)

Shri Krishna And Company (BID ID -5742393)