Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.0 LAccepted-AOC 5021 1 CAT III MODERN HOUSING COMPLEX MANIMAJRA CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹44.5 L+₹77,543 (1.77%)Rejected-Finance | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | Rejected-Technical 94 5TH FLOOR TOWER D SPENGLE HEIGHTS DHAKOLI KC ZIRAKPUR TEH DERABASSI SAS NAGAR MOHALI PB | S A S NAGAR | PUNJAB | 140103 | - | Rejected-Technical Bidder not fulfill the eligibility criteria |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
8 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh Office N Area Pin-160003
SPL REPAIR TO BLDG NO T-456 TO T-465 OF WESTERN COMMAND CBRN SCHOOL AT K AREA AND PROVN OF 65 NOS GEYSERS (25 LTR) CAPACITY FOR 65 GOVT MD ACCN OF FAFA AT SEC 29 UNDER GE CHANDIGARH
2023_MES_608416_1
GE/CHD-38/2023-24
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
Class D category a(i) and b(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹99,800
Yes
4 Oct 2023
8 Jul 2023
10 Aug 2023
8 Jul 2023
8 Aug 2023
27 Jul 2023
8 Jul 2023 - 18 Jul 2023
Amount
Excavating in trenches (soft/loose soil) , n exc 1.5m wide & n exc 1.5m in depth for foundation etc and getting out complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25cm thick.
Removing excavated soil nexc 50m and depositing where directed at a level nexc 1.5m above the starting point.
Dismantling boarding, any description, fixed in any position fixed with screws,nails etc.
M&L PCC 1:4:8 type D2 ( 40 mm graded aggregates) Cement concrete in foundations, filling and mass-concrete etc complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L broken stone & boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface
Material & labour for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate), as in floor finished even & rough to receive top layer/finish complete all as specified & directed.
M&L for 25 mm thick cement concrete 1:2:4, type B-1(using 20mm graded stone aggregate) as in floor finished even & fair complete all as specified and directed.
M&L Rendering 15mm thick plaster in cement mortar 1:4 on brick or concrete masonry walls, finished even and fair complete all as specified and directed.
M&L for preparing newly plastered surfaces and applying two coats of cement base paint over a coat of primer, all as specified and directed.
Taking down chowkhats with shutters (without taking off shutter from frame)exc 1.5 Sqm but exc 4 sqm each with mongry nd making good the distrubed surfaces in CM 1:3 complete all as specified and as directed.
S&F 125x60mm pressed steel frames made out of 1.25mm thick steel sheet for doors,windows with one or more rebates incl necessary fixing lugs,hold fast, hinges lock, strike plate etc complete all as specified and directed.
M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate, as for back filling the chowkats, as in coping, bed plates including necessary form work and weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-charge
M&L for applying two coats of synthetic enamel paint newly wooden surfaces exc 10cm width or girth over a coat of pink primer incl preparation of new wooden surfaces complete all as specified and directed.
S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type with both faces are covered with decorative face veneer with lipping/frame to match, all as specified & directed by Engr-in-Charge.
S&F 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
S&F Stainless steel wire cloth.0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed withstainless steel wire staples
S&F 200 mm long aluminium anodised extruded section tower bolts with plate, staple & bolt and fixed to shutter complete all as specified and as directed.
S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 150mm aluminium handles, cast type anodised complete all as specified
Demolition of cement concrete as in ground floors and in paving n. exc 15cm thick above ground floors and removing rubbish out of MD land complete all as specified and directed.
M&L for 75 mm thick PCC (1:3:6 ) type C-2 using 20 mm graded stone aggregate as in plinth protection laid in panels finish the top surfaces even and fair without using extra cement including forming contraction joint s filling with sealing compound grade `A` complete all as specified and directed,
M&L Coloured joint free Non Skid ceramic tiles 8 to 9mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified and directed.
M&L for Coloured joint free Non Skid ceramic tiles 8 to 9mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified and directed.
M&L for 16-18 mm thick granite slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including rounded and chamfered edges complete all as specified and as directed.
M&L for Endura tiles, good grip series 300mm x 300mm x 10mm thick laid in floor etc set in neat cement slurry and pointed in coloured cement including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Taking down chowkhats with shutters (without taking off shutter from frame) not exc 1.50 sqm each with mongry and making good the distrubed surfaces in CM 1:3 complete all as specified and as directed.
S&F 100 mm long PVC Hinges complete all as sepcified and directed.
S&F solid PVC door frame of size 50mmx47mm made out 5mm plain colour PVC sheet reinforced with MS square tube made as per specification and drawing.
M&L Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thicks with partical board core), with 2, 4, or 6 raised paneldesign with 2mm thick MouldedPVC Sheet on the front face &2mm plain colour PVC sheet onback face, supplying & fixing inframe at site as per specification & drawing complete all as specified and directed.
Taking down AC pipes any size or pattern incl all fittings heads, shoes, bends. Swan necks, etc including cleaning for refixing or removing to store.
S&F PVC (SWR) 110 mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to wall with PVC clamp complete all as specified and directed.
S&F PVC (SWR) 75 mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to wall with PVC clamp complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bend of any radius with acess door complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bend of any radius with acess door complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door fixed in repair complete all as specified.
S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed .
Taking up or down 15mm bore steel water tubing and connection including cleaning for refixing or removal to store all as specified.
S&F for 16mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl all fittings , (elbow, socket, reducers etc.), complete all as specified and directed .
S&F in repair 16 mm CPVC SDR -11 Tank Adaptor complete all as specified and directed
S&F in repair 16 mm CPVC SDR -11 Union complete all as specified and directed
S&F in repair 16 mm CPVC SDR -11 Ball Valve complete all as specified and directed
Taking up or down 20mm bore steel water tubing and connection including cleaning for refixing or removal to store all as specified.
S&F for 20mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl all connected fittings (elbow, socket, reducers etc.), complete all as specified and directed .
S&F in repair 20 mm CPVC SDR -11 Tank Adaptor complete all as specified and directed
S&F in repair 20 mm CPVC SDR -11 Union complete all as specified and directed
S&F in repair 20 mm CPVC SDR -11 Ball Valve complete all as specified and directed
Supply & fix in repairs chromium plated, Brass, Jet spray including flexible pipe 15mm bore of leanth 1.5m, screwed down, high-pressure pipe of 15 mm bore with wall flange fixed to wash down water closet (pedestal pattern) complete all as specified and directed.
Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 360mm wide x 390mm high and 415 to 445mm long flexible pipe including p or S PVC trap complete all as specified and directed.
Supply & fix in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.
S&F in repairs 15mm dia bib tap, chromium plated brass, fancy type with crutch or butterfly handle, screwed down complete all as specified and directed.
S&F in repairs 15mm bore CP angle cock/Stop valves fancy type,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed.
S&F in replacement PVC connection 15mm size with PTMT Nuts of length 450mm complete all as specified and directed
Supply and fix in repairs, urinal, bowl type or half stall pattern, white inclduing connection with 32mm size CP waste coupling, PVC waste pipe and urinal spreader fixed to walls complete all as specified and directed.
S&F in repairs Ceramic Vitreous China wash basin oval shape Table Top/over Counter vessel 500 x 380 x 120mm with CP waste coupling & pipe complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15mm dia CP Center hole mixer (for hot and cold water), screwed for iron pipe complete all as specified and directed.
S&F in repairs PVC waste pipes 32 mm suitable for basins/ sink / urinals complete all as specified and directed.
M&L in repairs brass chromium plated shower rose 125mm size with or without swivel joints with shower arm 15 mm size, 195mm long with bend of 45 degree with flange , including fixing to steel pipe or union
S&F in repairs chromium plated towel rail 60 cm long 20mm dia with flanges complete all as specified and directed.
Dismantling of PVC water storage tanks capacity 500 to 1000 Ltrs.
S&F rotational moulded polyethylene (tripple Layer) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.
S&F 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge
Demolition of reinforced cement concrete in any position at any height (reinforcement cut as required to facilitate demolition) and removing rubbish out of MD land complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 , type B-1(using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, shelves including form work and the like complete all as specified and directed.
S&F in repairs for 18/19 mm thick PVC board with screws in cup board shutters/ shelves and kitchen cabinets including beading and lipping all as specified & directed.
S&F aluminium anodised hasp and staple 100 mm , safety type, brass with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed .
S&F 150 mm aluminium handles, cast type, anodised all as specified & directed.
S&F in repair 30 mm Continuous (piano) hinges, brass, bright finish or electrogalvanised complete all as specified and directed
Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets.
M&L 9 mm thick PVC gypsum board as in ceiling including anodised aluminium snap grid frame work for ceiling having grid size 605 x 605 mm comprising of wall angle of size 25 mm x 25 mm x1.30 mm, main runner of size 38 mm x 26 mm x1.30 mm. The grid system will be suspended at every 1200 mm c/c in both directions by using 3.5 mm dia aqualine wire fixed to purline or RCC roof with suitable fastners to with stand the load of grid system with ceiling board complete all as specified and directed.
S&F in repair 5mm thick coloured wood grain printed PVC sheet strips in wall panelling over and including PVC frame and overlap strips and corner angles complete inclusive of Solvent Cement and fixing at site as per manufacturer's instructions complete all as specified and directed.
M&L for Salt-glazed stoneware gully,traps, 100 X 100 mm square or round mouthed, tvpe 'P 'including all excvation and earthwork comcrete in beds,surrounds,kerbs etc setting in cement mortar 1:1 complete all as specified and directed.
M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested. (Cement concrtete 1:3:6 type C-2 bore of pipe in 150mm) complete all as specified and directed.
S&F reinforced concrete pipes with collars, 150mm bore, class NP2, laid, jointed and tested after laying complete all as specified and as directed.
S&F factory made precast RCC 1:2:4 type B-1, as per drg (20mm graded stone aggregate) as in cover slabs for manholes etc of size of 750 mm x 900 mm x70mm rectangular including 70x3mm ms flat all around complete all as specified and directed by Engr-in-Charge.
M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern confirming IS-15658-2006, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, filling the joints with sand sweeping extra sand; complete all as specified and directed.
M&L for point wiring using approved colour coding as per IS (For phase and neural), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC casing caping with fittings ISI marked, PVC terminated in modular junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and unsheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified for One light/fan point controlled by one switch & fan regulator.
All as per item no. 79 above but one socket outlet three pin, 5 Amps on the same board.
All as per item no. 79 above but one socket outlet three pin, 5 Amps, independent.
M&L for point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cabel 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC casing caping with fittings ISI marked, PVC terminated in modular junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 16 Amps all as specified.
All as per item no. 82 above but but copper conducter 4.00 sqmm (nominal area).
S&F switch modular type single pole one module, 6 Amps complete all as speciifed.
S&F Switch modular type single pole one module, 16 Amps complete all as speciifed.
S&F Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6 Amps complete all as speciifed.
S&F Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as speciifed.
S&F Supply and fix single pole and neutral encolsure with two pin and earth plug with socket complete with one single pole MCB 20 Amp 240 Volts complete all as speciifed.
Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as speciifed.
S&F as in repair batten Led 22 w inveter LED tube light complete fitting 230 volt energy saving, 04 hrs battery backup, CRI ≥80 more than, driver efficiency ≥ 85%, operating voltage 230 volt, 50hz operating temp (-10°C to 50°C) complete accessories internally pre wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed by engineer-in-charge.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative warm white type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fix bulk head light 9 watt LEd type including bulb complete all as speciifed.
Supply and fix modular fan step type regulator 120W 2 module complete all as speciifed.
Supply and fix ceiling rose 3 terminal PVC polycarbonate insulated body complete all as speciifed.
Supply and fix modular metal flush terminal boxes with lumina plate and frame suitable for 1 module complete all as specified and directed.
Supply and fix modular metal flush terminal boxes with modular plate and frame suitable for 2 module complete all as specified and directed.
Supply and fix modular metal flush terminal boxes with modular plate and frame suitable for 3 module complete all as specified and directed.
Supply and fix modular metal flush terminal boxes with modular plate and frame suitable for 4-5 module complete all as specified and directed.
Supply and fix modular metal flush terminal boxes with modular plate and frame suitable for 6 module complete all as specified and directed. .
Supply and fix modular metal flush terminal boxes with modular plate and frame suitable for 8 module complete all as specified and directed. .
Supply and fix modular blank plate one module complete all as specified and directed.
M&L for sub main wiring in replacement (with approved colour coding as per IS) with single core 6Sqmm FRLS PVC insulated multistranded copper conductor cable 1.1 KV grade ( two runs of main cable) alongwith one run of single core 6sqmm FRLS PVC insulated flexible stranded copper donductor 1.1 KV grade for earthing drawn in suitable sized PVC casing caping complete all as specified and directed. Note: for payment purpose 2 runs of 6Sqmm cable + one run of 6Sqmm cable shall be considered as one Rm
Supply & fix sheet metal enclosure MCB distribution board, Triple pole 240 volts 04 way with IP-43 IK-09 protection double door complete with aluminium bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
All as per item no 103 above but single pole and neutral, 8 way
All as per item no 103 above but single pole and neutral, 4 way
Supply and fix MCB TPN of capacity 63Amp , 16 KA , 415V , IP-43, IK-09 complete all as specified and directed.
Supply and fix MCB SPN, 'C' series. 10 KA, 240 Volts 40-63 Amps capacity complete all as specified and directed.
Supply and fix MCB SP, 'C' series. 10 KA, 240 Volts, 6-32 Amps capacity complete all as specified and directed.
Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified and directed.
Supplu and fix steel water tubing, galvanised, light grade, ISI marked, 40 mm bore with and including all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
Sand cushioning with clean dry sand to cables with layer of sand 8cm before laying of cable and 15cm thick after laying of cable complete all as specified. Note : For payment purpose punned thickness of 18cm shall be measured against spread thickness of 23cm as mentioned in para 19.75 of SSR part-I
Supply and laying burntbricks sub class "B" old size for cable protection laid flat lengthsise perpenducualr to the axis of cable complete all as specified and direted by Engineer-in-Charge.
Supply and fix MCCB 3 pole,415 volt,fixed type,100 Amps with breaking capacity 16 KA complete all as specified and direted by Engineer-in-Charge.
Taking down point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. all as specified.
M&L for earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009) complete all as specified and directed by Engineer-in-Charge. Note : The unit rate includes for protecton pipe 15mm and GI earth strip 4mm from top of earth plate upto 7.50 metre above ground level.
Supply and fix Electric water Heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece complete all as specified and directed by Engineer-in-Charge. Make : Havells/Venus/Bajaj
S&F GI pipes 15mm bore ISI marked medium grade with all fittings complete fixed on floor / wall with and including clamp including vent pipe etc complete all as specified and directed by Engineering-in-Charge.
M&L for cutting holes in brickwork not exceeding 150 Sqcm and making good distrubed surfaces with cement mortar 1:4 complete all as directed.
M&L for cutting & screwing existing steel tubing 20/15mm dia bore size for alternations or additions required for connection with inlet pipe of Geyser complete all as directed at site.
S&F PVC connection 450mm long for cold / hot water heavy duty made out of double layer at Nylon & wire fabric at pressure 6Kg / CM both side, CP brass 15mm bore coupling or nuts complete all as specified and directed by Engineer-in-Charge.
S&F angle stop valve 15mm bore heavy duty fancy type chromium plated with long shank and cup concealed in wall complete all as specified and directed by Engineer-in-Charge.
S&F Bib taps, cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed of 15mm dia fancy type complete all as specified and directed by Engineer-in-Charge.
M&L point wiring using approved colour coding as per IS with copper conductor 2.5 Sqmm (Nominal Area) PVC insulated unsheathed, multi stranded copper cable single core in & including rigid non-metallic PVC concealed conduits 25/20mm dia ISI marked with two nos sunken pressed steel terminal boxes for mounting of switch & socket separately and socket controlled by independent switch 15 Amp including 3mm thick hylum sheet phonetic laminated with 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor single core cable of green colour as continuous earth wire connected to common earth and earth dolly for socket earthing complete all as directed.
S&F modular switch single pole 16 Amps, 1 way, 1 module complete all as specified and directed by Engineer-in-Charge.
S&F socket outlet modular type 2/3 pin combined 6/16 Amps, 2 module complete all as specified and directed by Engineer-in-Charge.
M&L for renewing glazed tiles in patches area not exceeding 5 Sqm each including removing and cleaning old tiles preparing beds and laying or setting, jointing & pointing new or old tiles complete all as specified.
Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges for concealed water tubing & making good cutting not exceeding 10cm girth complete all as specified and directed by Engineer-in-Charge.
Material & labour for mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
jaswant singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .