COMPOSITE WORKS FOR CONSTRUCTION OF CGS AND MOTHER STATION AT DARRANG, CGS CUM MOTHER STATION AT BISHWANATH AND CGS STATION AT SONITPUR DISTRICTS OF ASSAM

Amount

GA 11.03 ( ASSAM)

SECTION-A : WORKS FOR CGS

Receiving and taking over of all Owner supplied materials from Owner's designated place(s) of issue, transportation including loading, unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s) / work site(s) / work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials (except those specified subsequently in SOR), equipment, consumables as defined in Contractor's scope of supply and their transportation to the work site(s); performing all above ground/buried piping fabrication works including cutting, edge preparation (inclusive of grinding the edges of pipes, fittings, flanges etc. to match with the matching edges of uneven / different thickness wherever required), fit up, bending, pre-heating wherever required, welding, threading etc.; erection of pipes of all types and thickness over sleepers, overhead on racks and at all elevations; hook-up with equipment nozzles; all types of inline and online instruments such as pressure / thermal safety valves (other than those covered separately), fittings of all sizes i.e., elbows, reducers, tees, 'o' lets, flanges, blind flanges, spectacle blinds, tapping's for pressure gauges, thermowells, hoses and hose couplings of all sizes, if applicable, vents and drains required for process and hydrotesting purposes etc. including fixing of all types of gaskets (including gaskets for RTJ flanges), bolts, studs and nuts of all sizes; carrying out non-destructive testing (excluding radiography covered subsequently in SOR) such as magnetic particle/ liquid penetration etc. as required; hook-up with existing piping / pipeline installed by others as per drawings wherever required; cleaning and flushing by water / compressed air, carrying out hydrostatic test, pneumatic test, valve functional test and any other type of testing as specified, de-pressurising, dewatering, drying by compressed air if applicable; cutting / rebeveling (as required), pre-commissioning and providing commissioning assistance to Commissioning Contractor / Agency for process piping and commissioning of non-process piping if applicable; clean-up and restoration of site, preparation of as built drawings, documents and project records; transportation of surplus free issue materials to Owner's designated place(s); completing all works in all respects as per the AFC drawings, specifications, standards and other provisions of Contract and instruction of Engineer-in-Charge. Note :- a) Installation of equipment shall be done by bidder as per directions, supervision and guidance of equipment manufacturer Engineer. Bidder shall inform at least 15 days before to owner for mobilizing of Vendor Engineer to site. Commissioning shall be done in presence & guidance of equipment manufacturer Engineer. b) All butt welded fittings end shall generally match with connecting pipe wall thickness. However, in case of misalignment, contractor shall have to do end preparation accordingly without any extra cost. c) All couplings, nipples, plugs for nipple etc. as required shall be supplied by contractor without any extra cost. d) All Gaskets & Nut-Bolts of adequate quantity shall be supplied and installed without any extra cost. e) All items fittings, flanges, valves, pipes below 2" shall be supplied & installed by the contractor under this item, Contractor to quote accordingly. f) Any branch connection taken from mainline shall be considered under this SOR item only. No extra cost shall be paid for the above items.

Installation of above ground Carbon Steel Process Piping as per details given below:

Size-6 Inch, Thk/Sch-6.4 mm, Material-API 5L Gr X52 PSL2, BE, Seamless, Dimension Std.-B 36.10

Size-4 Inch, 300# Thk/Sch-STD, Material-ASTM A106 Gr B (CHARPY), BE, Seamless,Dimension Std.-B 36.10

Size-4 Inch, 300# Thk/Sch-STD, Material-ASTM A333 Gr 6, BE, Seamless,Dimension Std.-B 36.10

Size-4 Inch, 150# Thk/Sch-STD, Material-ASTM A333 Gr 6, BE, Seamless,Dimension Std.-B 36.10

Size-2 Inch, 300# Thk/Sch-XS, Material-ASTM A106 Gr B (CHARPY), BE, Seamless,Dimension Std.-B 36.10

Size-2 Inch, 150# Thk/Sch-XS, Material-ASTM A333 Gr 6, BE, Seamless,Dimension Std.-B 36.10

INSTALLATION OF VALVES

Receiving and taking over of all Owner supplied materials, equipment's from Owner's designated place(s) of issue, loading , unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials, equipment, consumables as defined in Contractor's scope of supply and its transportation to the work site(s);installation of valves, flow meters, strainers, equipment's including fixing of gaskets, bolts, studs, nuts wherever required, levelling, aligning, installation and assembly of accessories including accessories for actuators including making electrical connections for such actuators, if any, by bolting/ threading or welding of pipes at all elevations, testing, completing all works in all respects as per drawings, specification, other provisions of Contract and directions of the Engineer-in-Charge. Note: a.) All items fittings, flanges, valves, pipes below 2" shall be supplied & installed by the contractor under this item, Contractor to quote accordingly. b.) All bolts, nuts, gaskets of all size shall be supplied & installed by the contractor under this item, Contractor to quote accordingly. c.) Contractor works includes all work including tie in with exisitng terminal inside Station and with pipeline

Installation, Calibration and Commissioning of Above Ground Butt Weld Ends DGAV Ball Valves, DGAV Actuator & Normal Ball Valve (BW) as per Standard Specification, Data Sheets, P & IDs as per details given below:

Size-6 Inch, Rating-300#

Installation of above ground Flanged Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size-4 Inch, Rating-300#

Size-2 Inch, Rating-300#

Size-2 Inch, Rating-150#

Installation of above ground Butt Welded Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size-4 Inch, Rating-300#

Size-2 Inch, Rating-300#

Installation of Insulating Joint as per details given below:

Size-6 Inch, 300#, Thk/Sch-6.4, Material-ASTM A694 F52

Supply including procurement and transportation to worksite(s)/workshop(s) including loading, unloading and handling for the following materials to be supplied by Contractor as per the requirement of PMS, specifications, data-sheets, standards, instructions of Owner/ Engineer-in-Charge and other provisions of Contract.

FLANGES

Supply of Weld Neck Raised Face (WNRF) Flanges as per details below:

Size-6 Inch, 300#, Thk/Sch-6.4mm, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5

Size-6 Inch, 300#, Thk/Sch-6.4mm, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5, with JS Holes

Size-4 Inch, 300#, Thk/Sch-STD, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5

Size-4 Inch, 300#, Thk/Sch-STD, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5,with JS Holes

Size-2 Inch, 300#, Thk/Sch-XS, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5

Size-2 Inch, 300#, Thk/Sch-XS, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5,with JS Holes

Size-4 Inch, 300#, Thk/Sch-STD, Material-ASTM A350 GR.LF2, Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5

Size-4 Inch, 300#, Thk/Sch-STD, Material-ASTM A350 GR.LF2, Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5, with JS Holes

Size-2 Inch, 300#, Thk/Sch-XS, Material-ASTM A350 GR.LF2, Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5

Size-2 Inch, 150#, Thk/Sch-XS, Material-ASTM A350 GR.LF2, Face/Finish-150, RF/125AARH, Dimension Std.-ASME B16.5

Supply of Blind Flanges as per details below:

Size-4 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5

Size-2 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5

Size-2 Inch, 300#, Material-ASTM A350 GR.LF2, Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5

Size-2 Inch, 150#, Material-ASTM A350 GR.LF2, Face/Finish-150, RF/125AARH, Dimension Std.-ASME B16.5

Supply of Spacer and Blind /Fig 8/ Spectacle Blinds per details given below:

Size-6 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, FF/125AARH, Dimension Std.-ASME B16.48

Size-4 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, FF/125AARH, Dimension Std.-ASME B16.48

Size-4 Inch, 300#, Material-ASTM A350 GR.LF2, Face/Finish-300, FF/125AARH, Dimension Std.-ASME B16.48

Size-2 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, FF/125AARH, Dimension Std.-ASME B16.48

FITTINGS

Supply of R=1.5D, 90° BW Elbow as per details given below:

Size-6 Inch, Thk/Sch-6.4mm, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9

Size-4 Inch, Thk/Sch-STD, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9

Size-4 Inch, Thk/Sch-STD, Material-ASTM A420 Gr.WPL6, Dimension Std.-ASME B 16.9

Size-2 Inch, Thk/Sch-XS, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9

Size-2 Inch, Thk/Sch-XS, Material-ASTM A420 Gr.WPL6, Dimension Std.-ASME B 16.9

Supply of R=1.5D, 45° BW Elbow as per details given below:

Size-6 Inch, Thk/Sch-6.4mm, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9

Size-4 Inch, Thk/Sch-STD, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9

Size-4 Inch, Thk/Sch-STD, Material-ASTM A420 Gr.WPL6, Dimension Std.-ASME B 16.9

Size-2 Inch, Thk/Sch-XS, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9

Size-2 Inch, Thk/Sch-XS, Material-ASTM A420 Gr.WPL6, Dimension Std.-ASME B 16.9

Supply of BW ReducingTee/Equal Tee as per details given below:

Size-6 Inch x 6 Inch Thk/Sch-6.4mm x 6.4 mm Material : API 5L X 52 / ASTM A 860 WPHY 52

Size-6 Inch x 4 Inch, Thk/Sch-6.4mm x STD , Material : API 5L X 52 / ASTM A 860 WPHY 52

Size-6 Inch x 2 Inch Thk/Sch-6.4mm x XS Material: API 5L X 52 / ASTM A 860 WPHY 52

Size-4 Inch x 4 Inch Thk/Sch- STD x STD , Material - ASTM A 234 Gr. WPB, (CHARPY) Dimension Std.-ASME B 16.9 300#

Size-4 Inch x 2 Inch, Thk/Sch-STD x XS , Material - ASTM A420 Gr. WPL6, Dimension Std.-ASME B 16.9 300#

Size-4 Inch x 2 Inch, Thk/Sch-STD x XS , Material - ASTM A420 Gr. WPL6, Dimension Std.-ASME B 16.9 150#

Size-2 Inch x 2 Inch Thk/Sch- XS x XS , Material - ASTM A 234 Gr. WPB, (CHARPY) Dimension Std.-ASME B 16.9 300#

Supply of BW Swage as per details given below:

Size-2 Inch x 0.75 Inch, Concentric, Thk/Sch-XS x S160 , Material - ASTM A 105 (CHARPY) Dimension Std.-BS-3799, PBE

Supply of Sockolet as per details given below:

Size-6 Inch X 1 Inch, 3000#, Material-ASTM A105, Dimension Std.-MSS-SP 97, SW

Size-6 Inch X 0.75 Inch, 6000#, Material-ASTM A105, Dimension Std.-MSS-SP 97, SW

Size-4 Inch X 1 Inch, 3000#, Material-ASTM A105, Dimension Std.-MSS-SP 97, SW

Size-4 Inch X 3/4 Inch, 6000#, Material-ASTM A105, Dimension Std.-MSS-SP 97, SW

Size-2 Inch X 3/4 Inch, 6000#, Material-ASTM A105, Dimension Std.-MSS-SP 97, SW

Supply & Installation of Reducer

Size-6 Inch x 4 Inch Thk/Sch- 6.4 mm Material: ASTM A860 WPHY52, BW MSS SP-75

Size-4 Inch x 2 Inch Thk/Sch- STD , Material - ASTM A 234 Gr. WPB, (CHARPY) Dimension Std.-ASME B 16.9 300#

Supply of Insulating Joint as per Material Requisition and attached Data Sheet with Station Work Tender.

Size-6 Inch, 300#, Thk/Sch-6.4, Material-ASTM A694 F52

Supply of Piping as per details given below:

Size-6 Inch, Thk/Sch-6.4 mm, Material-API 5L Gr X52 PSL2, BE, Seamless, Dimension Std.-B 36.10

Size-4 Inch, 300# Thk/Sch-STD, Material-ASTM A106 Gr B (CHARPY), BE, Seamless,Dimension Std.-B 36.10

Size-4 Inch, 300# Thk/Sch-STD, Material-ASTM A333 Gr 6, BE, Seamless,Dimension Std.-B 36.10

Size-4 Inch, 150# Thk/Sch-STD, Material-ASTM A333 Gr 6, BE, Seamless,Dimension Std.-B 36.10

Size-2 Inch, 300# Thk/Sch-XS, Material-ASTM A106 Gr B (CHARPY), BE, Seamless,Dimension Std.-B 36.10

Size-2 Inch, 150# Thk/Sch-XS, Material-ASTM A333 Gr 6, BE, Seamless,Dimension Std.-B 36.10

RADIOGRAPHY:

Performance of radiographic inspection of piping of all types, sizes, thickness including providing or hiring of all necessary equipment, supply of all consumables including radiographic films and whatever else even though not expressly mentioned but required to perform the work as per specification and instructions of Engineer-in-Charge. Contractor to submit DPR, Inspection Report along with Radiography Report to Engineer-in-Charge. Note : a) All NDT including Radiography, MPT, LPT for below 2" are covered under this SOR item. No separate payment shall be made. Radiography of piping joints as per details given below:

Size-6 Inch

Size-4 Inch

Size-2 Inch

PIPE SUPPORTS

Supply, fabrication and erection of pipe/ equipment supports (for all sizes/ thickness) including shoes, pipes etc. as required, cradles, turn buckles, T-posts for all types of guides, anchors, special supports for cold/hot insulated pipes etc. if applicable, all necessary equipment, consumables, labour etc. for completing all works including supply of bolts, nuts, washers, U-clamps, wooden blocks etc. as required for supporting, supply and application of paints and primers suitable for normal corrosive painting environment as defined in contract document and as per standard specification for painting specification no. VPC-SS-PI-0008, Drawings, Specification, Standards, other provisions of Contract and instruction of Engineer-in-Charge.

MS Structural Steel

PAINTING

Supply of paints, solvents and primers, preparation of surfaces and application of primer and finish paints suitable for normal corrosive painting environment as defined in contract document and on pipes as per standard specification for painting specification no. VPC-SS-PI-0008, identification, lettering/ numbering, colour coding etc. as specified including rub down and touch up of shop primer or scrapping of shop primer wherever required and providing of scaffolding for all heights, labour, materials, tools and tackles, consumables, supervision etc. to complete the work in all respect as per Specification, Drawings, Standards and instruction of Engineer-in-Charge. Note : a) All painting work for sizes 2" and below are covered under this SOR item. No separate payment shall be made.

Painting of all above ground piping including all fittings, valves, flanges etc. and including colour bands

Size-6 Inch, Painting Environment-Corrosive Normal Environment (Above Ground)

Size-4 Inch, Painting Environment-Corrosive Normal Environment (Above Ground)

Size-2 Inch, Painting Environment-Corrosive Normal Environment (Above Ground)

PIPING LEAKS / BURSTS (ATTRIBUTABLE TO OWNER)

All works for leak/burst (occurring during hydrostatic testing) including necessary repair/replacement of defective pipe length, including cutting and removing out defective pipes, welding, NDT of welds, repair and re-testing of defective welds, painting of welded joints, clean-up, re hydro testing of the pipe segment including providing all necessary equipment's, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, specifications enclosed with the Contract and directions of Engineer-in- Charge. Note: a) This rate shall be applicable for manufacturing defects in Company supplied materials only.

Fire Fighting Equipment Supply, installation and commissioning of the following fire fighting equipment

SUPPLY AND INSTALLATION OF FIRE EXTINGUISHER AT CGS

75 kg capacity DCP type (trolley mounted)

9 kg capacity DCP fire extinguisher

4.5 kg capacity CO2 fire extinguisher

SUPPLY OF RAIN CAP

Supply and Installation of Rain Cap including all necessary fabrication works, including providing all necessary equipment's, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, data sheet, specifications enclosed with the Contract and directions of Engineer-in-Charge.

4" Rain Cap for Vent, 15HLT

Nitrogen Supply

Supply of Nitrogen with cylinder for localized purging, Hook up of pipeline and piping.

INSTALLATION OF MISC. EQUIPMENTS

Transportation of all equipments along with all accessories supplied by supplier etc. from owner's storage point / designated location to work site including loading and unloading, erection of all equipments including layout marking at site, fabrication and installation of shims including cutting and grinding, installation and levelling of base plates, assembly of sub-assemblies, bolting, fitting of all interconnected piping items (supplied by equipment supplier), shifting and reconfiguration of spreader beams, installation of rigging apparatus for erection crane, alignment of equipment at all elevations as per drawings, removal, placing and shifting of stools and saddles including loading and unloading, installation of all mountings and accessories, all enabling work as required, and completing the work in all respects as per drawings, specification, codes and instruction of Engineer-in-Charge. Note: a) Actual rate shall be paid to contractor based on actual weight of items.

Check Metering System - Qty. 01 No.

INSTALLATION OF MECHANICAL EQUIPMENTS

Transportation of all equipments (Static & Rotary) along with all accessories supplied by supplier etc. from owner's storage point / designated location to work site including loading and unloading, erection of all static / rotary equipments including layout marking at site, fabrication and installation of shims including cutting and grinding, installation and levelling of base plates, assembly of sub-assemblies, bolting, fitting of all interconnected piping items (supplied by equipment supplier), shifting and reconfiguration of spreader beams, installation of rigging apparatus for erection crane, alignment of equipment at all elevations as per drawings, removal, placing and shifting of stools and saddles including loading and unloading, installation of all mountings and accessories, all enabling work as required, and completing the work in all respects as per drawings, specification, codes and instruction of Engineer-in-Charge. Note: a) Actual rate shall be paid to contractor based on actual weight of items.

Skid Mounted Odorising Unit-Qty. 01 No.

CNG Cascades (3000 WL, 4500 WL capapcity) + Ground Level

CNG Dispenser at + Ground Level

SINAGE BOARDS

Supply and installation of Aluminum composite panel board all support structural/fixtures at all heights painted with two coats of first quality synthetic enamel paint over two coats of Zinc phosphate primer of approved make, concrete grouting in 1:2:4, wherever required complete in all aspects as per following specifications, size, shape and as directed by In-Charge. Board Material : Aluminum composite panel ( Alucobond, Alpolic, Renybond 3mm/ 0.3 mm thick PVDF coated French Blue No. 166 (IS -5) Lettering : 3M vinyl 3630 series Border : L pipe, Aluminum ; Powder coated Laminate : 3M 8519 series laminate film Note: The matter/drawing to be printed shall be provided in soft form as Doc/ PDF/Dwg file. Conversion required if any for making the files printable shall be in vendor's scope.

SLOGAN PAINTING

Painting of slogans/ boards/ lettering on plastered wall/ MS boards, AC sheets etc. at heights as indicated below as directed at site. Rate to include for all scaffolding, staging, supply and providing of required colour 1st quality synthetic enamel paint for the letters as well as the back ground. Paint area measured once shall be considered for payment purpose.(Visual Identity designs as per Visual Identity manual) at all heights

POLIHED GRANITE FACIA

Providing and laying mirror polished Black granite 20mm thk over Front wall including engraving NEGDCL Logo and lettering using stainless steel letters. Each granite facia shall be minimum 3.2 sq. mt. (2 by 1.6 m approx.).

INTERNAL SIGNAGE BOARDS

Supply and Installation of Mandatory Signs made of 3mm ACM Sheet and Printed on ECO Vinyl Sheet 300x100 mm. Detail specification as given in Tender

Supply, Installation, commissioning of Eye/Face wash and safety shower with Pedal, made of Galvanized Iron material as instructed by Engineer-in- Charge.

SECTION-B : SS TUBE SUPPLY,LAYING & TESTING

Supply, Laying, testing & commissioning of SS Tubes, SS Fittings & SS Valve as per technical specification, typical P&ID, drawing, scope of work including SS tube installation, hydrotest at site & as per instruction of Engineer in charge.. Laying Including with Clamps & Supports as per instruction of Engineer in charge

SS Tubes

¾”OD X 0.095” min Wall thk.,Material SS316 SS Tube

½”OD X 0.083” min Wall thk.,Material SS316 SS Tube

Conductive Core Thermoplastic Hose

QRC 1/2" NPTS, 1/2” ID Conductive Core Thermoplastic Hose for CNG Service with break away coupling Min 4 meter length including connector for 1/2 '' 3 way ball valve (Make-Parker)

Size : ¾" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Size : ½" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Size : ¾" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Size : ½" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Union

Size : ¾” OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Size : ½" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Reducing Union

Tube OD 3/4" x Tube OD 1/2", Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Equal Tee

Size:¾" OD x ¾" OD x ¾" OD, Material : SS316 ( Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Size:½” OD x ½” OD x ½” OD, Material:SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Reducing Union Tee

¾" OD x ½" OD x ¾" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Tube End Connection

½” Tube End & ¾” OD with Ferrule Fitting, SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Front Ferrule

3/4" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

½" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Back Ferrule

3/4" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

½" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Male Connector

Size ¼” NPT (M) x 3/8” OD, SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Size 1/2” NPT (M) x 3/8” OD, SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Size 1/2” NPT (M) x 3/4” OD, SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

SS Ball Valves

2-Way Trunioun Normal Bore Ball Valve ¾"(Rated pressure : 6000 PSI @ 70°F Temperature : 0°F to 400°F)

2-Way Trunioun Normal Bore Ball Valve ½"(Rated pressure : 6000 PSI @ 70°F Temperature : 0°F to 400°F)

3-Way Trunnion Mounted, Reducer Bore Ball Valve ½" OD end Connection and ¼” NPT (F) bottom end connection(Rated pressure : 6000 PSI @ 70°F Temperature : 0°F to 400°F)

Supply, erection & commissioning of following miscellaneous items as per technical specification and at locations (within the stations) as directed by EIC

SS Nut Ferrule

SS Nut 3/4" OD SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

SS Nut 1/2” OD SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)

Fire fighting Equipments

Sand Bucket stand (4 Nos. on each strand)

Supply and installation of mandatory signs made of 3 mm ACM sheet and printed on ECO Vinyle sheet

Wind Sock

INSTRUMENTATION

Supply, Calibration , Installation, Testing & Commissioning of instrumentation items listed below: (For details, Refer Instrumentation Datasheets , SOW, Standard drawings & Specifications of the Tender)

Supply, Installation, Testing & Commissioning of Pressure Gauge as per datasheet, Specification, P&ID & Drawings etc. Supply, Installation, Calibration and Testing and Commissioning of Bourdon type Pressure Gauge direct mount with supply of 2-valve 3-way manifold,150mm dial, range:0-80 Kg/cm2, wetted part SS316, IP 65 rated, blow out protection and shatter proof heavy duty glass Inclusive of necessary accessories as per the data sheet, standards, specifications and P&ID attached with this tender.

Supply, Installation, Testing & Commissioning of Pressure Gauge as per datasheet, Specification, P&ID & Drawings etc. Supply, Installation, Calibration and Testing and Commissioning of Bourdon type Pressure Gauge direct mount with supply of 2-valve 3-way manifold,150mm dial, range:0-6 Kg/cm2, wetted part SS316, IP 65 rated, blow out protection and shatter proof heavy duty glass Inclusive of necessary accessories as per the data sheet, standards, specifications and P&ID attached with this tender.

Cable termination, Glanding, Testing and Commissioning of DIrect Gas Actuated Valve (DGAV) as per datasheet, Specification, P&ID & Drawings etc. Cable termination, Glanding, Testing and Commissioning of Direct Gas Actuated Ball Valves (DGAV) including the Supply, installation & Testing of SS tubes and fittings along with mid steel structure supports & clamps for impulse lines (wherever required), painting of supports as per std., manifold/ isolation valves etc as required for tubing of each Valve, including supply of SS double compression cable gland, Copper lugs and other required consumable for completion of the work as per the direction of Engineer-In Charge / site supervisior but clusively for supply of Valves with actuator.

Supply, Installation, Testing, Calibration and Commissioning of Self Actuated Pressure Reduction Valve (CPV-1001A & 1001B) as per specs,data sheets, PMS & P&IDs. Self actuated pressure reduction valve shall be of Carbon steel body suitable for Gas service/pipe spec with SS internals along with all SS tubing fittings etc.,Inclusive of supply and installation of necessary accessories as per the data sheet, standard specification and P&ID attached with this tender.

Supply, Erection, Testing and commissioning Gas Detection System (GDS) with following F&G devices such as Gas Detectors, Beacons, Hooters and MCP associated cable & cabling, erection of hardwares etc. as required. at CGS Stations. (For details, Refer Instrumentation Datasheets , SOW, Standard drawings & Specifications of the Tender)

Wall Mounted 8-channel Gas Detection system, SIL-2 certified, shall have provision to MCP, Hooter, Beacon and GDS system shall have programmable Gas Detector channel & relay card / module to configure field devices for CGS's. GDS system facilitate with serial and modbus communication port (RS232/RS484/RJ45) to interface with station / terminal RTU etc. as per the data sheet, standards, specifications and P&ID attached with this tender.

Point Gas Detector - IR type Type, 4-20 mA HART, 2 wire 24 VDC loop powered Ex 'd', IP 67, Enclosure material SS316 with display.

Open Path Gas Detector(Tx/RX) - UV/IR type Type, 4-20 mA HART, 2 wire 24 VDC loop powered Ex 'd', IP 67, Enclosure material SS316 with display.

Beacon - LED Type , 24 VDC, Ex 'd', IP 67, Enclosure MOC- SS316, outdoor Hazardous area application complete with wiring and accessories

Hooter 24 VDC, Ex 'd', IP 67, Enclosure MOC- SS316, outdoor Hazardous area application complete with wiring and accessories

Manual Call Point - break glass type with nickel plated brass hammer & SS Chain , 24 VDC, IP67, Enclosure MOC- Stainless Steel or Alloy, outdoor hazardous area application.

Supply, Testing, Installation, Erection and Commissioning of Fire Alarm Control Panel (FACP) in Instrument room, electrical room, battery room etc. at CGS Stations Including supply, Installation, Testing and commissioning of Smoke, Heat Detectors, MCP, Hooter, Panel etc.FACP shall be of wall mounted type will be installed in Instrument Room including glanding, termination, ferruling, dressing etc. at both ends. Supply & installation of cable trays (if necessary), supply of erection materials, cable ferrules, cable lugs, cable tie etc. for successful commissioning of FACP. Note: Quantity of Detector, MCP, Beacon & Hooter are tentative and may be changes as per the site requirment.

Fire Alarm Control Panel (FACP) Supply, Installation, Testing & Commissioning of Analogue Addressable Fire Alarm Control Panel , installed in CGS Control Room complete with battery backup and accessories, interfaces with RTU and inclusive of cabling, termination etc.

Supply, Installation, Testing & Commissioning of Smoke Detectors ((Addressable type) with Response Indicator Combination of (Ionization+Photoelectric) complete with wiring and accessories for installation inside the Control Room/Electrical Room/Guard Room as per Tender datasheet.

Supply, Installation, Testing & Commissioning of Heat Detector with Response Indicator (Addressable type, IP - 42 Protection Class), complete with wiring and accessories for installation inside the Control Room/Electric Room/Battery Room as per Tender datasheet.

Supply, Installation, Testing & Commissioning of Manual Call Point (Indoor Application) complete with wiring and accessories as per Tender datasheet.

Supply, Installation, Testing & Commissioning of Conventional Sounder / CUM Strobe, Power Supply 24VDC, 3 Tone, Xeon Flash Tube, Enclosure Material- FR ABS Plastic Red complete with wiring and accessories.

CCTV System Supply, Installation, Testing & Commissioning of CCTV System including CCTV Cameras, PoE Ethernet Switches, CCTV Workstation, Network Video Recorder (NVR) and Server Rack, CCTV Mounting Stantion/Pole.

Supply, Installation, Testing & Commissioning of IP PTZ camera (for process area) day Night HD (1080P) explosion proof with required connecting patch cords, wall/pole mount installation accessories as per technical specification. PTZ camera shall be powered by PoE switch via Cat6 cable

Supply, Installation, Testing & Commissioning of IP Dome Type (Inside the Control Building) camera HD (1080P) IP42 with required connecting patch cords, wall/Celling mount installation accessories as per technical specification. Dome camera shall be powered by PoE switch via Cat6 cable.

Supply, Installation, Testing & Commissioning of IP Fixed camera (For entry & Emergency gate) day Night HD (1080P) explosion proof with required connecting patch cords, wall/pole mount installation accessories as per technical specification and shall be powered by PoE switch via Cat6 cable.

Supply, Installation, Testing & Commissioning of PoE Ethernet Switch 8 port with connecting patch cords, Pigtails and other required accessories as per technical specification.

Supply, Installation, Testing & Commissioning of LCD Display unit (24"), Keyboard with Joystick along with required cables, connectors, interfaces complete as per technical specification.

Supply, Installation, Testing & Commissioning of 8 Port Compact Network Video Recorder (NVR) with (4TB) of 60 days recording, connecting patch cords, Pigtails and other required accessories cameras as per technical specification.

Supply, Installation, Testing & Commissioning of Wall Mounted Rack: 600mmwidth/800mm Depth for installation of NVR unit and other related equipments as per technical specification.

Supply and Installation of CCTV Mounting Stantion/Pole, mounting fittings and accessories etc. as required

Cables, Cables Trays and Junction boxes Supply, laying in tray/tenches, testing, erection of armoured signals cable from field instruments to junction boxes including termination, glanding, ferruling, dressing etc at both ends. Supply of cable trays, cables glands, junction boxes, erection materials, cable ferrules, cable lugs, cable ties. Supply, Installation and erection of cable trays and junction boxes.

2P X 1.5 Sq.mm ‘IS’ Twisted Pair, Individual & Overall Screened shall be of XLPE.CS.PVC.SWA.PVC/ Blue

6P x 1.5 Sq.mm, ‘IS’ Twisted Pair, Individual and Overall screen shall be of XLPE.CS.PVC.SWA.PVC/ Flame retardant / Blue

8P X 1.5 Sq.mm ‘NIS’ Twisted Pair, overall screen shall be of XLPE.CS.PVC.SWA.PVC/ Flame retardant/ Black

1T X 1.5 Sq. mm, Fire resistant,Over all Screened Cables

6T X 1.5 Sq.mm Fire Resistant Individual & Overall Screened, Twisted Pair overall screen shall be of XLPE.CS.PVC.SWA.PVC/Red

2C X 1.5 Sq.mm, Fire Resistant, Overall Screened/Black

8C X 1.5 Sq.mm, Fire Resistant, Overall Screened/Black

CAT-6 CCTV CABLE

RS 485/ SERIAL LINK /MODBUS CABLE

Field mounted Fire (Analog) Junction box (FAJB) Ex‘d’ Type (Explosion Proof), 12 Nos. cable Input (1/2" NPTF) and 4 Nos. cable output (01 Nos. M20, 1 No. M25, 01 Nos. M32 & 01 Nos. M40 x1.5), 24 Terminal Block.

Field mounted Fire (Digital) Junction box (FDJB) Ex‘d’ Type (Explosion Proof), 12 Nos. cable Input (1/2" NPTF) and 4 Nos. cable output (01 Nos. M20, 1 No. M25, 01 Nos. M32 & 01 Nos. M40 x1.5), 24 Terminal Block.

Cable Trays (150 mm x 50 mm, Perforated Type, GI Tray)

Supply of Erection & Commissioning Spares inclusive of necessary tubings, fittings, Cable Glands, Canopies etc. as required

Supply of Mandatory Spares, Commissioning Spare and Two year operation spare as per the Vendor recommnedation

Supply of manpower for supervision of Installation, Testing, Commissioning inclusive of interconnection and interfacing with other system (if any) of check metering system at respective site. The price shall be inclusive of Airfare Boarding, Lodging, Local Transport, Incidental, Traveling etc. & all other expenses.

CIVIL ITEMS

Earth Work in Foundations(VCS-SS-CS-6022)

Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth upto 3,0m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete,including shoring and strutting.

Up to 1.5m depth

1.5m to 3.0m depth

Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial lead of 100M including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids) i) Upto 1.0Km.

EARTHWORK IN FILLING by excavating the earth from BORROW AREAS arranged by CONTRACTOR for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete.

Plain & Reinforced Concrete(VCS-SS-CS-6023)

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix with 40mm and down size graded crushed stone aggaregates/Gravels.(ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR AT THEIR COST)

1:2:4 ( 1 cement:2 Sand: 4 Aggregates)

1:4:8 ( 1 cement:4 Sand: 8 Aggregates)

1:5:10 ( 1 cement:5 Sand: 10 Aggregates)

Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20mm and down size graded crushed stone aggregates/gravel in SUB-STRUCTURE of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipe encasement, catchpits, drains, RCC pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. all complete (excluding the Cost of Reinforcement and Shuttering) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. (ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR AT THEIR COST)

Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20mm and down size graded crushed stone aggregates/gravel in SUPER STRUCTURE in suspended floors, slabs, beams, columns, walls including counterforts, staircases, landings, steps, facias, fins, mouldings, gutters, shelves, windowsills, canopies, lintels, girders, ducts, brackets, chajjas with drip moulds, pedestals, posts, struts, equipment/machine foundations, ramps etc. (including single pour concreting upto 250m3) including cost of admixtures if used providing pockets, openings, recesses, chamfering wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. all complete (excluding the Cost of Reinforcement and Shuttering) for all heights above plinth level in any shape, position, thickness etc. all complete as specified, shown and directed.

CENTERING AND SHUTTERING Providing and fixing CENTERING AND SHUTTERING in foundations, footings, raft beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, equipment/machine foundations, pedestals, abutments, pipe sleepers, columns, plinth beams, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/bunkers/silos/ shafts/ hoppers/liquid storage structures etc. including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed.

i) For all depths below and upto & inclusive of plinth level.

ii) For all heights above plinth level.

CHAIN LINK FENCING(VCS-SS-CS-6013)

Supplying, fabricating & fixing steel structural fencing fabricated from pipes conforming to IS: 2062 & fixing of GI weld mesh made from 3.15mm GI wire @ 75mm bothways to structural steel frame by means of welding/bolting , including applying two coats of approved quality of synthetic enamel paint over a priming coat of an approved shade including supply of all raw materials, bolts, electrodes, transportation, including making pockets & pouring with PCC (1:2:4) in blocks 500x500x500 for fixing of posts etc. complete as per enclosed drawing, technical specifications, scope of works and directions of the Engineer-In-Charge. (a) Fencing height 1.8 m.

GROUTING

Providing and laying manually at all positions a ready mix non-shrink cementitious grout of minimum compressive strength of 45 N/mm2 for specified works e.g. base grouting of rotating equipment and other installation complete in all respects as per scope of work, detailed construction drawings, technical specifications and directions of the Engineer-In-Charge.

REINFORCEMENT

Supplying and placing in position HIGH STRENGTH DEFORMED STEEL BARS REINFORCEMENT (conforming to IS:1786, Grade Fe 500), for R.C.C. work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with contractor's own 16 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete as directed.(SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE).

Structural Steel Works(VCS-SS-CS-6024)

Supplying, transporting, storing, fabricating in position and testing/examining bolted and/or welded STRUCTURAL STEEL WORKS at all levels and locations including all builtup sections/compound sections made out of rolled sections and/or plates/bent plates in trusses, purlins, wind ties, wind girders, columns, portals, racks, frameworks, crane gantries, surge girders, bracings, floor beams, lifting beams, monorails, platforms, staircases (excluding chequered plates and gratings), ladders, stoppers, brackets, side runners, sagrods, supports for equipment and technological accesories and process piping, hand railings, posts, conveyor galleries, trestles, towers, masts, junction houses etc., cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/welding of joints, (including sealing the joints of box sections with continuous welding), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings, preparing the surface for painting and applying shop primer as per Specification No. 6-44-0004 (or Job Specification, wherever applicable) after fabrication etc. all complete. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE.

SS TUBE TRENCH Providing and Construction of SS tube trench in brick masonry in brick masonry wall of thickness 230 mm and size of cross section of trench (600x(300/600)) over the 100mm thick PCC(1:4:8) base with precast SFRC cover of 600x550x70mm thick along with edge angle(ISA 75x75x6 ) and fixing of ISA 50x50x6 for supporting pipe trays @ spacing of 1000mm c/c aloing the trench, including 12mm in CM 1:5 plasting of walls of trenches complete in all respect as per scope of work, detailed construction drawings, technical specifications and directions of the Enigineer-in-charge.

Brick Masonary(VCS-SS-CS-6027)

Providing and laying BRICK MASONRY WITH BRICKS OF CLASS 7.5 in cement mortar 1:6 (1 Cement : 6 Sand) in one or more brick thickness and in any shape (excluding circular/curved brick masonry) at all depths and height including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/slab, embedding the fittings & fixtures, curing, etc. all complete as per specifications.

Providing and laying HALF BRICK MASONRY with bricks of CLASS 7.5 in cement mortar 1:4 (1 Cement : 4 Sand)in any shape, including the cost of materials, labour, scaffolding/staging, sampling and testing, soaking of bricks, cutting and laying of bricks, providing openings of any shape & size, raking out the joints, supplying and placing 2 Nos. 6mm dia. M.S. Bars at every fourth course, sealing the gap between masonry and soffit of beam/slab, embedding the fittings and fixtures, curing etc. all complete as per specification.ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR.

PLASTERING WORK(VCS-SS-CS-6043)

Providing plain cement plaster in cement mortar (1 cement:4/6 fine sand by volume) on masonry, PCC/ RCC including preperation of base, finishing, curing etc; also including providing 20 gauge chicken wire mesh stretched tight at all RCC/ PCC and masonry meeting points in 300mm wide strips (150mm on on each surface) fixed with G.I. "U" type nails before plastering.

External Walls Grit wash plaster The base plaster shall be 12 mm thick in c.m. 1 : 4 in gray cement and should be sufficiently rough and combed by wire brush or nail comb, freed from all dust, dirt, grease, oil etc. for proper bonding.

Internal Walls Ordinary plain cement plaster Average 12mm thick 1:4 (1 cement : 4 sand). (ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR AT THEIR COST)

Ceiling Ordinary plain cement plaster Average 6mm thick 1:4 (1 cement : 4 sand). (ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR AT THEIR COST)

PAINTING WORK(VCS-SS-CS-6043)

Painting of Internal walls:- Providing & applying 2 coats of waterproof decorative cement paint of approved make and approved shade, cleaning, including preparation of surfaces,base primer, curing etc. all complete

Painting of External walls:- Providing & applying 3 coats of waterproof decorative cement paint of approved make and approved shade, cleaning, including preparation of surfaces,base primer, curing etc. all complete

Misc. Items(VCS-SS-CS-6030)

SAND FILLING Supplying and filling approved SAND of specified quality under floors, in foundations, plinths, tank foundations etc. for all depths and heights including cost of sand,royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers of loose thickness not exceeding 150 mm,watering,ramming,compacting with mechanical compactors and/or other equipment to the specified levels to achive 85% relative density as per IS:2720 Part XIV,including preparation of subgrade to the required slope,providing testing apparatus and testing the degree of consolidation all complete as per drawings, specifications and direction of Engineer-in-charge.The rates shall be inclusive of the cost of all labour,material,equipments etc. all complete .

FLOOR FINISHING(VCS-SS-CS-6040)

VITRIFIED TILES Providing and laying Vitrified tile flooring of size 600mm x 600mm of approved make (Marbonate or approved equivalent) set in cement slurry over 1:4 cement mortar bed of 35mm average thickness at all levels. Joints between tiling to be filled with grout of approved shade as per manufacturers specifications. Rate to include cost for laying tiles to approved pattern, design as directed by Architect, including surface cleaning, cement mortar, curing, acid wash, etc., and protecting the flooring with polythene sheet and pop overlay till hand over.

ANTI SKID CERAMIC TILE FLOORING Providing and laying Ceramic tile flooring of approved shade of premium quality of Kajaria make or approved equivalent set in cement slurry over 1:4 cement mortar bed of 35mm average thickness. Joints between tiling to be filled with grout of approved shade as per manufacturers specifications.

Acid Proof Tiles Lining(VCS-SS-CS-6048)

Providing and laying acid resistant, vitrified tiles of approved size as per manufacturer's specs. in floor/ skirting/ Dado laid over and including bitumen priming layer, 12mm thick Bitumen mastic layer and 6mm thick resin type chemical resistant mortar conforming to IS: 4443 including raking out and flush pointing of joints with resin type chemical resistant mortar, preparation of back ground surface, finishing etc. all complete.

SKIRTING

Providing and laying 10mm average thick vitrified tile skirting with 10 to 12 mm thick cement mortar (1:3)

Providing and laying 10mm average thick kota stone skirting with 10 to 12 mm thick cement mortar (1:3)

DADOING

UPVC DOORS & WINDOWS WORK(VCS-SS-CS-6042)

Providing and fixing of uPVC Door size 2100 mm x 1200mm and 2100 mm x 750 mm of wall thickness 1.2mm ± 0.25mm made out of extruded section plain uPVC sections. The Door frame made out of rigid uPVC sections meter cut at 4 corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded rigid uPVC with internal reinforced with provision of 5mm glaze/wire mesh as per requirement. The door shall be fixed to the wall using 65x100mm long M.S. fasteners at suitable place provided for each vertical and horizontal member etc. complete as per manufacture’s specification and direction of Engineer-in-charge.

Providing and fixing of uPVC Window, size 1200mm x 1600mm of wall thickness 1.2mm ± 0.25mm made out of extruded section plain uPVC sections. The window frame made out of rigid uPVC sections meter cut at 4 corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded rigid uPVC with internal reinforced with provision of 5mm glaze/wire mesh as per requirement. The window shall be fixed to the wall using 65x100mm long M.S. fasteners at suitable place provided for each vertical and horizontal member etc. complete as per manufacture’s specification and direction of Engineer-in-charge.

Supplying and fixing M.S. rolling shutters, conforming to IS : 6248 including providing all accessories like shutter (constructed with inter locking lath sections formed out of cold rolled steel strips 0.9mm thick,80mm wide and 1.25mm thick, 80mm wide respectively for shutter width upto 3.5M and above 3.5M), jointless M.S. channel section for guide (min. 3.15mm thick), M.S. girders, pressed bottom rails, shutter suspension stud shaft with pully and cage, top rolling springs, locking arrangement etc. as per approved manufacturers drawings including painting with two coats approved make & shade and synthetic enamel paint over a coat of approved quality red oxide zinc chromate primer, making good of all damaged surfaces etc. all complete.

SOLING

Providing and laying Hand Packed Rubble Cut Stone Soling of size 90 to 63mm in flooring / driveway duly consolidated. approved quality, as close as possible, hand packing with stone chippings to fill the voids, laying murrum, hand ramming, watering, well consolidating complete as per specifications, drawings and instructions including preparation of bed and dressing the same to proper level etc complete.

Providing and laying Hand Packed Rubble Cut Stone Soling of size 63 to 45mm in flooring / driveway duly consolidated. approved quality, as close as possible, hand packing with stone chippings to fill the voids, laying murrum, hand ramming, watering, well consolidating complete as per specifications, drawings and instructions including preparation of bed and dressing the same to proper level etc complete.

PAVER BLOCKS & KERB STONE

Supplying and placing in position as per approved pattern of Cement Concrete Inter locking paver block 80 mm thick of approved shape, rough finish, M-40 strength of approved brand laid over the sand bed of minimum 100 mm thick. The CC interlocking blocks to be of uniform Grey colour or as approved by EIC complete in all respects , as per technical specifications and directions of the Engineer-in-charge. Note :- 1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such paver blocks, sand, earth work in excavation in cutting earth in all conditions, shuttering with all bye works and sundry works. 2. To be read in conjunction with Particular Specification 3.Supply of all materials and providing labour, tools and tackles are in contractor’s scope.

Providing and fixing precast concrete Kerb stones (125 wide x 300 deep) of M - 30 grade or equivalent of approved make and shape at or near ground level as per approved pattern and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) including the cost of required centering , shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) wherever required over 75 mm thick PCC M-10 levelling course, complete in all respects as per scope of work, detailed construction drawings, technical specifications and directions of the Engineer-In-Charge.

BOREWELL

Supply, laying, drilling and commissioning of G.I Bore well of 150mm Diameter and upto 100m depth including submersible pump with all accessories, panel, wiring and all other works required to make it operational all complete in all respects as per scope of work and directions of the Engineer-in-charge. Note: 1. Rate to include cost of all labour, tools, tackles, equipment, hire, charges, supply of all materials including pipes, water meter, valves, boring, priming, cabling, pumps, clearing, earthwork, etc. with all bye works and sundry works and consumables.

PLUMBING & SANITARY

RAIN WATER SPOUT AND PIPES supplying and fixing on wall face unplasticised-Rigid PVC rain waterpipes conforming to IS:13592 Type A including jointing with seal ringconforming to IS:5382 leaving 10mm gap for thermal expansion.(i) SingleSocketed pipes

110 mm dia pipe

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid.

Supplying, fitting and fixing white glazed vitreous china wash basin of superior quality with ISI mark and size 550mm x 430mm, having single ordouble holes with 15 mm CP brass pillar tap, CP brass chain and plugs, 32mm CP brass waste coupling, 32mm CP Brass Bottle trap and unions, 32mm dia PVC flexible waste pipe,15mm PVC inlet water pipe connection, CI cantilever bracketsembedded in 1:2:4 concrete, 15 mm CP brass angle stopcock, etc. fillingthe gaps between basin and wall with white cement etc., pedestal, allcomplete at all leads and lifts as per drawings, specifications andinstructions of the Engineer Incharge.

Providing and fixing 32 mm diameter flexiple P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete :

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. :

With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5

Constructing brick masonry Septic Tank with brickwork in cement mortar 1:6 including R.C.C. 1:2:4 (1 cement : 2 sand : 4 graded coarse aggregate) top slab, C.I. cover all as per standard drawing, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.

For 30 Users

MANHOLE (VCS-STD-CS-6012/6013) Construction as per standard drawing of brick masonry (brick class shall be as mentioned below) inspection chambers/manholes of 750mmx750mm internal size 1000mm deep(Max.) in cement mortar 1:4 (1 cement: 4 sand) with CI frame and cover 500mm clear dia, (circular Medium duty of grade MD-10) conforming to IS:1726 fixed on RCC slab of M-30 grade, necessary excavation, supplying, fixing 4 Nos. 16mm dia M.S. rungs, M-20 grade foundation concrete 1:3 cement mortar(1 cement: 3 sand) plastering of 13mm average thickness for inside & 16mm avg. thickness for outside exposed surfaces, backfilling, disposal of surplus earth upto a lead of 100M, benching with M-20 grade cement concrete and rendering smooth with a neat coat of cement slurry, painting the C.I. frame and cover with two coats of chlorinated rubber zinc phosphate primer @ 40µ DFT per coat and finish painting consists of two coats of chlorinated rubber paint @40µ DFT per coat etc. all complete as per drawings, specifications and directions of Engineer-in- Charge.

Providing and fixing approved stone ware 100mm dia. gully trap including grating with CI frame and cover 300mmx300mm including brick masonry (brick class shall be as mentioned below) chamber in 1:4 cement mortar( 1 cement: 4 sand) on M-20 grade cement concrete foundation, plastered inside and outside surfaces with 1:3 cement mortar (1 cement: 3 sand) with 13mm average thickness including providing and fixing light duty CI frame and cover, painting CI frame and cover with two coats of chlorinated rubber zinc phosphate primer @ 40µ DFT per coat and finish painting consists of two coats of chlorinated rubber paint @40µ DFT per coat, earth work in excavation, backfilling, removal of surplus earth, benching with M-20 grade cement concrete and rendering smooth with a neat coat of cement slurry etc. all complete as per drawings, specifications and directions of Engineer-in-Charge.

HEALTH FAUCET Cost of providing and fixing Health faucet CP Jaquar are approved equivalent.

MIRROR Supplying and fixing mirror for wash basin of standard make as per standard specifications

Pillar Cock Cost of providing and fixing pillar cock long neck with aerator. Jaguar or approved equivalent fixed with necessary accessories.

Angular Stop Cock Cost of providing and fixing ½" dia Jaquar angle stopcock.

Concealed Stopcock Cost of providing and fixing concealed stopcock Jaquar or approved equivalent

C.P Trap Cost of providing and fixing C.P. cockroach trap, floor drains of Chilli / equivalent make

Nahani Trap Supplying and fixing approved quality heavy grade cast iron Floor/Nahani Trap with CP pressed steel grating including cutting floors and making good the same, etc., making inlet and outlet connections, etc. complete for 100mm inlet and 100mm outlet as per drawings, specifications and directions of Engineer-in-Charge.

SS jali Cost of providing and fixing SS Jali of Jaquar /equivalent make

Towel Rod Supplying and fixing Towel rod of standard make as per standard specifications

INTERNAL PLUMBING WORKS

Internal Plumbing work P/f 1/2"consisting of UPVC or equivalent pipe and 25mm dia. PVC Pipe outlet (prince or equivalent ) including G.I. & PVC assorted fittings, such as elbow,tees ,bends,& unions including applying creosote and wrapping with hessin cloth, including chasing the walls for concealing the pipe lines and making good the same. This includes providing & fixing 3/4" dia "C" class G.I. Pipe for inlet & outlet of Water Tank connection.

Internal Plumbing work P/f 1/2"consisting of UPVC or equivalent pipe and 50mm dia. PVC Pipe outlet (prince or equivalent ) including G.I. & PVC assorted fittings, such as elbow,tees ,bends,& unions including applying creosote and wrapping with hessin cloth, including chasing the walls for concealing the pipe lines and making good the same. This includes providing & fixing 3/4" dia "C" class G.I. Pipe for inlet & outlet of Water Tank connection.

Internal Plumbing work P/f 1/2"consisting of UPVC or equivalent pipe and 110mm dia. PVC Pipe outlet (prince or equivalent ) including G.I. & PVC assorted fittings, such as elbow,tees ,bends,& unions including applying creosote and wrapping with hessin cloth, including chasing the walls for concealing the pipe lines and making good the same. This includes providing & fixing 3/4" dia "C" class G.I. Pipe for inlet & outlet of Water Tank connection.

EXTERNAL PLUMBING WORKS

Providing & fixing of external plumbing consisting of UPVC or equivalent pipe 50mm dia with all fittings like bend, tees, gate valves, NRV's, y's etc which Nani traps,special pieces and accessories for laying joiniting including testing & commissioning of all Pantry/toilets.

Providing & fixing of external plumbing consisting of UPVC or equivalent pipe 150mm dia with all fittings like bend, tees, gate valves, NRV's, y's etc which Nani traps,special pieces and accessories for laying joiniting including testing & commissioning of all Pantry/toilets.

Providing & fixing of external plumbing consisting of UPVC or equivalent pipe 160mm dia with all fittings like bend, tees, gate valves, NRV's, y's etc which Nani traps,special pieces and accessories for laying joiniting including testing & commissioning of all Pantry/toilets.

Barbed Wire Fencing(VCS-STD-CS-6073)

Supplying, fixing and tensioning in position 2.5mm(12gauge), 2 ply, 4 points, GI Barbed wire designation A-1 conforming to IS:278 in horizontal rows and cross diagonals for compound wall "Y" shaped overhang etc. with necessary GI staples, clips and pins, GI straining bolts and binding wire with all labour and materials etc. complete as per drawings, specifications and directions of Engineer-in-Charge.(The barbed wire shall be measured in linear length of the barbed wire actually fixed).(6 layer in each linear meter)

Supplying, fabricating and fixing in position structural steel line posts, straining posts, struts including 'Y' shaped overhang for barbed wire fencing conforming to IS:2062, cutting to required size as per drawings and specifications, welding where necessary, embedding in position, holding to correct level and line, any auxiliary structure for dummy supports, drilling holes and painting as per painting specification attached with tender , cutting brick/rubble/concrete surfaces if necessary, grouting with 1:3 cement mortar with all labour, materials including cost of grout etc. complete as per drawings, specifications and directions of Engineer-in-Charge. (All materials including cement shall be supplied by contractor.)

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, spring core wire (2.5 mm thick)of high tensile strength of165kg/sq. mm with tape (0.52mm thick) and weight 43.478 gm/metre and fixing the same with existing Y-shaped angle iron placed 2m apart and with 6 horizontal R.B.T. (Reinforced Barbed Tape)wire, stud tied with G.I.staple sand G.I.clips to retain horizontal, including necessary bolts , all complete as per direction of Engineer-incharge. Note-1) Total height of boundary wall including concertina coil fencing will be about 10 feet from ground le vel (higher of level on both sides ) 2 ) Cost of M.S. angle(Y –shape)shall be paid separately in item no. 1

Providing and fixing in position Steel Entrance Gates consisting of MC- 75 framework for shutters, 20mm square M.S. vertical bars welded to the framework @100mm c/c, 3mm thick M.S. sheet boxing, locking arrangement, 25mm thick, 75mm dia M.S. wheel with ball bearing including fixing the gate to RCC/ masonry by M.S. hinge arrangement (75mm x 75mm x 6mm M.S. angles, bolt, washers) and M.S. hold fast grouted with M-15 grade concrete, providing and fixing M.S. pivot, 50mm x 50mm x 6mm M.S. Tee bent to shape and embedded in road surface for gate opening track, gate stopper, painting the gate with approved shade and quality synthetic enamel paint (two coats) and a coat of approved quality primer, ensuring smooth operation of the gate etc. all complete as per attached standard drawing.

RCC ROAD

Supplying and laying of stone aggregate of 63mm down to 45mm size for WBM layer Base Course, tough, sound, clean and durable including cost of stone aggregate, all royalties, taxes, handling, transportation to site, unloading the same by the side of road with all leads and lifts, spreading and laying to form water bound macadam in one layer of 75mm compacted thickness to proper grade, camber and level, filling voids with screenings and binding material of plasticity index up to 6%, including cost of supply of screening and binding material, consolidating with power driven road roller, watering, with all leads and lifts etc. complete as per drawings, specifications and directions of Engineer-in-Charge.

Providing and laying Reinforced Cement Concrete of M-25 grade with 20mm and down size graded crushed stone aggregates in pavements etc, making recess/drains, laying in alternate panels, laying of 0.125 mm polyethylene sheet above WBM layer, filling the gaps between the panels with bitumen sand mix filler material etc. for all depths including shuttering, tamping, curing, etc. as specified in any shape, thickness, position and finishing the top surface smooth etc. all complete as per drawings, specifications and directions of Engineer-in-Charge.

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:4:8 by mass (1 Cement: 4 Coarse Sand: 8 Crushed Stone Aggregates/Gravels) with 40mm and down size graded crushed stone aggaregates/Gravels.(ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR AT THEIR COST)

Concrete Pavement

Providing and laying Reinforced cement concrete with 20mm and down size graded crushed stone aggregates in flooring, pavements etc. including leaving pockets, if necessary, making recess/drains, laying in alternate panels, etc. for all depths including shuttering, tamping, curing, etc. as specified in any shape, thickness, position and finishing the top surface smooth etc. all complete as per drawings, specifications and directions of Engineer-in-Charge (excluding cost of providing and fixing reinforcement & joint sealing). For RCC of M-25 grade concrete(all materials including cement shall be supplied by contractor)

Percolation pit

Providing, constructing and finishing of percolation pit of dia 3.0 up to depth of 2.5m from NGL with filter media/ brick bats. Boring of percolation pit till depth of water table, diameter of bore 300 mm, at the lowest point of depression insertion with strainer 150mm upvc pipe and gravel fillig between pipe and the bore. Including over flow pipe, drain pipe, vent pipe with cap (min 100mm upvc pipe), 600mmx600mm heavy duty manhole covers, reharge manhole pit.RCC top slab (min 150mm), shuttering, staging, placing bending of reinforcement complete in all respect as per drawing specification and directionof engineer in charge. Rate shall include the cost of all labour, tools and tackles, equipment charges, supply of all material.

Misc. Structural Steel Works(VCS-SS-CS-6026)

Supplying, fabricating and erecting in position at all levels and locations bolted, screwed and/or welded M.S. CHEQUERED PLATES of any thickness in walkways, platforms, stair treads, any other place as directed etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing, welding, preparation and submission of fabrication drawings and preparing the surfaces for painting and applying shop primer as per Specification / BIS Codes after fabrication etc. all complete as specified and directed. (ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR AT THEIR COST)

Roof Treatment(VPC-SS-CS-6044)

Providing and applying polyether based polyurethane (PU) waterproof coating consisting of 2 components (resin + hardener) in four coats consisting of a primer adhesion coat and three sealing coats applied by brush evenly to perfect level @ min.160 gm/sq.M per coat over R.C.C. slab including sprinkling the last coat of P.U. with a layer of clean sand (300 micron) and laying min. 50mm thk. PCC (1 cement :2 coarse sand :4 aggregate) over the fully cured coating in panels of max. 1.2M x 1.2M with 24 SWG chicken wire mesh finished smooth and sealing joints between panels with Polysulphide sealant as per approved manufacturers spec. and including preparing the base surface (levelling, cleaning, filling up cracks with thin paste of Polyurethane filling compound) providing fillets of 75mm radius with PCC (1 cement : 2 coarse sand : 4 aggregate) at junctions of horizontal and vertical surfaces, continuing the water proofing on vertical face to a minimum ht. of 150mm over finished roof surface, terminating it in continuous groove of 10mm x 20mm and filling with polyurethane sealent putty, continuing the treatment into rain water outlets by , providing 450mm x 450mm khuras at all outlets, levelled down by min. 25mm, finishing all complete.

Area Cleaning and Striping

Earth work in surface excavation (striping) not exceeding 15 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including clearing jungle, uprooting of rank vegetation, grass, brush wood, trees and saplings, getting out and disposal of excavated earth, rubbish outside the property line, as directed by the Engineer-in-Charge :

All kinds of soil

Construction And Installation Of Bored Cast In Situ Piles(VCS-SS-CS-6033)

Construction of Bored cast-in-situ RCC straight shafted piles as using stone chips of 20mm and down size, through all types of soil strata, maintaining borehole sides in position by bentonite slurry by suitable method, tremie concreting, supply of necessary material including plastisizers if required, mobilization of piling rigs and other ancillary equipments/accessories as specified including demobilization etc complete, labour & carry out any ancillary work adjunct to piling work, disposal of surplus materials including earth, muck etc beyond specified lead, shifting plant and equipments from one pile location to another, all complete as per specifications, drawings & direction of Engineer-in-charge .Diameter of pile 450 mm , Length below CUT OF LEVEL 10 TO 15 M , Grade of concrete M30.

Construction of bored cast-in-situ RCC straight shafted piles by suitable ROCK CUTTER/ROCK DRILLING BIT in Disintegrated/weathered/Hard rock strata, to depths specified using stone chips of 20mm and down size, maintaining borehole sides in position by bentonite slurry by suitable method, tremie concreting supply of necessary material including plastisizers if required, mobilization of piling rigs and other ancillary equipments/accessories as specified including demobilization etc complete, labour & carry out any ancillary work adjunct to piling work, disposal of surplus material including earth, muck etc beyond specified lead, shifting plant equipments from one pile location to another, all complete as per specifications, drawing & direction of Engineer-in-charge (Cost of reinforcement is excluded, cement supplied by contractor at his own cost and duly approved by Engineer-in-Charge).Diameter of pile 450 mm , Length below CUT OF LEVEL 10 TO 15 M , Grade of concrete M30 , Sockting length into rock 2.5 M.

Testing Of Concrete Piles(VCS-SS-CS-6034)

Initial Pile Load Tests

Conducting initial pile load test by direct loading on piles: Conducting INITIAL VERTICAL pile load test by direct loading on piles including finishing pile head, supply & erection of kentledge of suitable magnitude, labour, excavation, back filling, compaction etc. all complete as per specifications and directions of Engineer-in-Charge, analysing the results, making the report and submitting the same in 5 copies (cost of pile is excluded) Diameter of pile 450 mm , Type of Pile Bored Cast In Situ / Driven Piles.

Conducting INITIAL PULL OUT pile load test by direct loading on piles including finishing pile head, supply & erection of kentledge of suitable magnitude, labour, excavation, back filling, compaction etc. all complete as per specifications and directions of Engineer-in-Charge, analysing the results, making the report and submitting the same in 5 copies (cost of pile is excluded) Diameter of pile 450 mm , Type of pile Bored Cast In Situ / Driven Piles.

Conducting INITIAL LATERAL pile load test by direct loading on piles including finishing pile head, supply & erection of kentledge of suitable magnitude, labour, excavation, back filling, compaction etc. all complete as per specifications and directions of Engineer-in-Charge, analysing the results, making the report and submitting the same in 5 copies (cost of pile is excluded) Diameter of pile 450 mm , Type of pile Bored Cast In Situ / Driven Piles.

Routine Pile Load Tests

Compression Test: Conducting ROUTINE VERICAL pile load test by direct loading on piles including finishing pile head, supply & erection of kentledge of suitable magnitude, labour, excavation, back filling, compaction etc. all complete as per specifications and directions of Engineer-in-Charge, analysing the results, making the report and submitting the same in 5 copies (cost of pile is excluded) ( Diameter of pile - 450 mm, Length below COL - 15 M, Type of pile - Bored Cast In Situ / Driven Piles )

Tensile Test: Conducting ROUTINE PULL OUT pile load test by direct loading on piles including finishing pile head, supply & erection of kentledge of suitable magnitude, labour, excavation, back filling, compaction etc. all complete as per specifications and directions of Engineer-in-Charge, analysing the results, making the report and submitting the same in 5 copies (cost of pile is excluded) ( Diameter of pile -450 mm, Length below COL - 15 M, Type of pile – Bored Cast In Situ / Driven Piles )

Shear Test: Conducting ROUTINE LATERAL pile load test by direct loading on piles including finishing pile head, supply & erection of kentledge of suitable magnitude, labour, excavation, back filling, compaction etc. all complete as per specifications and directions of Engineer-in-Charge, analysing the results, making the report and submitting the same in 5 copies (cost of pile is excluded) (Diameter of pile - 600 mm, Length below COL - 15 M, Type of pile - Bored Cast In Situ / Driven Piles )

ELECTRICAL (SV-01)

SUPPLY, INSTALLATION, TESTING&COMMISSIONING (SITC)

Electrical Power Distribution Boards(DBs)

MEDB(Main Electrical Distribution Board) - Supply, Design,Manufacturing,Assembly,Inspection,Testing at shop,packing of complete set of Electrical panel suitable for 415 Volt,3 phase neutral,4wire,50Hz,25kA AC supply, system fabricated in compartmentalized fom from CRCA sheet steel not less than 2mm thick, duly treated with 7 tanks process, powder coated with approved shade and oven dried .The complete Electrical panels shall ahve a short circuit withstand capacity of 25kA for 1 second and IP42 rating.The panel shall have suitable arrangement for transfer to GG during mains failure and vice-versa when mains power is restored .The panel shall have a common copper earth bus of suitable size at the rear with 2Nos. earth studs, design as per drawings and documents, spsecifications,codes and standards and direction of consultant /owner (ref key single line diagram - C241131-MAN-EL-SLD-4001). Feeder details are as follows- Incoming-1- 63A, 4P MCCB with μProcessor release Incomer-2- 63A, 4P MCCB with μProcessor release Outgoing- 16A, DP MCB 03 nos 32A, 4P MCB 04 nos 20A, DP MCB 02 nos 32A 4P MCB 01 nos + 40A 4P Contactor 01 nos + 1 nos timer + 5nos 16A DP MCB 32A 4P MCB+32A 4P ELCB+10A DP MCB 04 nos + 20A DP MCB 04 Nos

MEDB(Main Electrical Distribution Board) - Supply, Design,Manufacturing,Assembly,Inspection,Testing at shop,packing of complete set of Electrical panel suitable for 415 Volt,3 phase neutral,4wire,50Hz,25kA AC supply, system fabricated in compartmentalized fom from CRCA sheet steel not less than 2mm thick, duly treated with 7 tanks process, powder coated with approved shade and oven dried .The complete Electrical panels shall ahve a short circuit withstand capacity of 25kA for 1 second and IP42 rating.The panel shall have suitable arrangement for transfer to GG during mains failure and vice-versa when mains power is restored .The panel shall have a common copper earth bus of suitable size at the rear with 2Nos. earth studs, design as per drawings and documents, spsecifications,codes and standards and direction of consultant /owner (ref key single line diagram - C241131-DEK-EL-SLD-4001). Feeder details are as follows- Incoming-1- 63A, 4P MCCB with μProcessor release Incomer-2- 63A, 4P MCCB with μProcessor release Outgoing- 16A, DP MCB 03 nos 32A, 4P MCB 04 nos 20A, DP MCB 02 nos 32A 4P MCB 01 nos + 40A 4P Contactor 01 nos + 1 nos timer + 5nos 16A DP MCB 32A 4P MCB+32A 4P ELCB+10A DP MCB 04 nos + 20A DP MCB 04 Nos

MEDB(Main Electrical Distribution Board) - Supply, Design,Manufacturing,Assembly,Inspection,Testing at shop,packing of complete set of Electrical panel suitable for 415 Volt,3 phase neutral,4wire,50Hz,25kA AC supply, system fabricated in compartmentalized fom from CRCA sheet steel not less than 2mm thick, duly treated with 7 tanks process, powder coated with approved shade and oven dried .The complete Electrical panels shall ahve a short circuit withstand capacity of 25kA for 1 second and IP42 rating.The panel shall have suitable arrangement for transfer to GG during mains failure and vice-versa when mains power is restored .The panel shall have a common copper earth bus of suitable size at the rear with 2Nos. earth studs, design as per drawings and documents, spsecifications,codes and standards and direction of consultant /owner (ref key single line diagram - C241131-BIN-EL-SLD-4001). Feeder details are as follows- Incoming-1- 125A, 4P MCCB with μProcessor release Incomer-2- 125A, 4P MCCB with μProcessor release Outgoing- 16A, DP MCB 05 nos 32A, 4P MCB 05 nos 32A, 3P MPCB 02 nos 10A, DP MCB 03 nos 20A, DP MCB 02 nos 32A 4P MCB 01 nos + 40A 4P Contactor 01 nos + 1 nos timer + 5nos 16A DP MCB 32A 4P MCB+32A 4P ELCB+10A DP MCB 04 nos + 20A DP MCB 04 Nos 63A 4P MCCB with 20kVAR Capacitor Bank

Automatic Power Factor Correction Panel

Supply, installation, testing and commissioning of automatic power factor correction panel with 4 stage 10kVAR capacitor bank complete with sensing CT and automatic power factor correction relay. The relay shave the facility for manual operation also.

Supply, installation, testing and commissioning of automatic power factor correction panel with 4 stage 20kVAR capacitor bank complete with sensing CT and automatic power factor correction relay. The relay shave the facility for manual operation also.

UPS and UPSDB

Supply, Installation, Testing and Commisioning of paralllel redundant (2x100% configuration) 3kVA AC UPS with isolation transformers and solid state voltage stabilizer and static by-pass switch.The UPS shall be suitable for 3 phase 415 volt input and 230 volt, 50Hz, single phase output. Battery Bank is not included in this item and shall be paid separately. UPSDB-Supply, installation, testing and commissioning of complete set of electrical panel suitable for 230V AC supply, 1phase, 2wire, 50Hz, 6kA fabricated from CRCA sheet steel not less than 2 mm thick duly treated with 7 tanks process, powder coated with approved shade and oven dried. Main Power Bus shall be of Copper 63A rating.Incomer 32A 2P MCB with shunt trip 1 no. Outgoing Feeders shall be as follows: 8 nos 6A DP MCB and 2 nos 10A DP MCB. The panel shall have a voltmeter and ammeter. The complete electrical panel shall have a short circuit with stand capacity of 6 kA for 1 second, IP 42 rating .The panel shall have a common copper earth bus of suitable size at the rear with 2 Nos. earth studs, design as per drawings and documents, specifications, codes and standards and direction of consultant /owner .(Ref Key Single line diagram -C241131-MAN-EL-SLD-4001). The incomer is to be provided witha suitable Type1+Type 2 SPD.

Supply, Installation, Testing and Commisioning of paralllel redundant (2x100% configuration) 3kVA AC UPS with isolation transformers and solid state voltage stabilizer and static by-pass switch.The UPS shall be suitable for 3 phase 415 volt input and 230 volt, 50Hz, single phase output. Battery Bank is not included in this item and shall be paid separately. UPSDB-Supply, installation, testing and commissioning of complete set of electrical panel suitable for 230V AC supply, 1phase, 2wire, 50Hz, 6kA fabricated from CRCA sheet steel not less than 2 mm thick duly treated with 7 tanks process, powder coated with approved shade and oven dried. Main Power Bus shall be of Copper 63A rating.Incomer 32A 2P MCB with shunt trip 1 no. Outgoing Feeders shall be as follows: 8 nos 6A DP MCB and 2 nos 10A DP MCB. The panel shall have a voltmeter and ammeter. The complete electrical panel shall have a short circuit with stand capacity of 6 kA for 1 second, IP 42 rating .The panel shall have a common copper earth bus of suitable size at the rear with 2 Nos. earth studs, design as per drawings and documents, specifications, codes and standards and direction of consultant /owner .(Ref Key Single line diagram -C241131-DEK-EL-SLD-4001). The incomer is to be provided witha suitable Type1+Type 2 SPD.

Supply, Installation, Testing and Commisioning of paralllel redundant (2x100% configuration) 5kVA AC UPS with isolation transformers and solid state voltage stabilizer and static by-pass switch.The UPS shall be suitable for 3 phase 415 volt input and 230 volt, 50Hz, single phase output. Battery Bank is not included in this item and shall be paid separately. UPSDB-Supply, installation, testing and commissioning of complete set of electrical panel suitable for 230V AC supply, 1phase, 2wire, 50Hz, 6kA fabricated from CRCA sheet steel not less than 2 mm thick duly treated with 7 tanks process, powder coated with approved shade and oven dried. Main Power Bus shall be of Copper 63A rating.Incomer 32A 2P MCB with shunt trip 1 no. Outgoing Feeders shall be as follows: 13 nos 6A DP MCB and 2 nos 10A DP MCB. The panel shall have a voltmeter and ammeter. The complete electrical panel shall have a short circuit with stand capacity of 6 kA for 1 second, IP 42 rating .The panel shall have a common copper earth bus of suitable size at the rear with 2 Nos. earth studs, design as per drawings and documents, specifications, codes and standards and direction of consultant /owner.(Ref Key Single line diagram -C241131-BIN-EL-SLD-4001). The incomer is to be provided witha suitable Type1+Type 2 SPD.

BATTERY BANK

SMF VRLA batteries bank -Supply, Installation, Testing and Commissioning of SMF VRLA batteries bank comprising of 8 nos of 120 Ah VRLA batteries with 2 hours total battery back-up time, complete with all interconnecting cables, glands, battery cables, battery racks, connectors and lugs etc.The battery bank shall be as per specifications Doc No:VCS-SS-EL-4042.( REF Key Single Line Diagram:--C241131-MAN-EL-SLD-4001 )

SMF VRLA batteries bank -Supply, Installation, Testing and Commissioning of SMF VRLA batteries bank comprising of 8 nos of 120 Ah VRLA batteries with 2 hours total battery back-up time, complete with all interconnecting cables, glands, battery cables, battery racks, connectors and lugs etc.The battery bank shall be as per specifications Doc No:VCS-SS-EL-4042.( REF Key Single Line Diagram:--C241131-DEK-EL-SLD-4001 )

SMF VRLA batteries bank -Supply, Installation, Testing and Commissioning of SMF VRLA batteries bank comprising of 16 nos of 84Ah VRLA batteries, split into TWO banks of 8 batteries each to give 2 hours back-up time, complete with all interconnecting cables, glands, battery cables, battery racks, connectors and lugs etc.The battery bank shall be as per specifications Doc No:VCS-SS-EL-4042. ( REF Key Single Line Diagram:--C241131-BIN-EL-SLD-4001 )

POWER CABLES

Supply, laying, termination, testing and commissioning of 1.1 kV grade, XLPE insulated, armoured power cable, control cabkle and signal cable, PVC inner sheathed, FRLS PVC outer sheathed (conforming to IS:7098and specification) of following sizes in trenches /excavated under round trenches /trays, pulling through pipes and its proper sealing, cutting of paved area, roads etc.

3.5Cx50 sq.mm A2XFY (incoming supply)

3.5Cx70 sq.mm A2XFY (incoming supply)

4Cx4 sq.mm 2XWY (ups and air compressor)

3Cx2.5 sq.mm 2XWY Copper PVC wire(for UPS and other loads)

3Cx6 sq.mm 2XWY (miscellaneous)

3Cx10 sq.mm 2XWY (miscellaneous)

Earthing and Lightning System

Supply, installation, testing, commissioning, transporting to site location of the complete earthing and lightning protection system, earth electrodes/ pit, earth main ring, earthing of electrical equipments, instrument panels, field instruments, process equipments and pipes/ flanges including all associated civil work with all material and labour as per specification and drawings approved by the company

Supply, installation, testing & commissioning of Conventional Earthing with Perforated GI earth pipe, 3.0 mtr long, 100 mm dia and Minimum 1.6mm Thick including accessories and providing masonary enclosure with CI cover plate having numbering and locking arrangement etc., with charcoal and salt as required as per IS 3043.

Supply, assembling, testing and commissioning all the items for constructing Cu plate earthing station comprises of Earthing with copper earth plate 600 mm X 600 mm X Minimum 3.15 mm thick including accessories, and providing masonry enclosure with CI cover plate having numbering and locking arrangement and PVC watering pipe of 50mm dia 2.7 metre long etc.with charcoal/ coke and salt as required.

GI Strip(50x6)mm

GI Strip(25x3)mm

Copper Strip(25X3)mm

Providing and fixing 10 mm braided copper wire on surface or in recess for loop earthing as required.

Supply and installation of Flexible Copper earthing (Static Discharge Grounding Reels) wire 10 sq. mm, 10 meters, Clip, reel & stand with complete accessories for Vehicle earthing.(LCV Loading/ unloading area)

Supply, installation, testing & commissioning of lightning conductor finial made of 25mm dia 300 long GI tube having single prong at top with 85 mm dia 3 mm thick GI base plate including holes etc complete as required. 25x3 mm copper strip for lightning protection will be from same item above

Arrangement for Earthing of LCV with Flexible green Cu wire (25 sqmm of 30 Meter length) ,Clamp (including bolting arrangement) ,Flexible PVC and other item etc.

Providing and fixing 16 way G.I Earthing plate For Earthing strip Termination

STREET LIGHTING POLES and OUTDOOR LIGHTING

Supply, installation, testing, commisioning of lighting fixtures complete with mounting bracket, flameproof, control gear box as per the type of fixtures, lamps, etc incliuding pipe inserts for cables and conncting works, with all material and labour as per specifications, drawings and instruction of Engineer-in-charge.Flameproof cable glands to be used in flameproof fitting.Work should be completed in all respects.

Area lighting, integral flameproof well glass fixtures (CMIFR approved for Zone1 and 2, Gas group IIA and IIB, Temp.Class T3) with 100 W LED luminiare with flameproof control gear of Baliga make or equivalent)

Street Light pole 7 metre high GI octagonal pole complete with bracket, GI clamps for fixing flameproof light fitting. 4 way flameproof pole JB, cable from JB to fixture, flameproof gland, civil works and its materials including all labours and complete materials .

INDOOR LIGHTING AND WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Scope includes supply of all components (MS/PVC conduit, JB, wire, etc) and labour

Wiring for power plug point (16A) upto 10 M with 4.0 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with (including) modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS Scope includes supply of all components MS/PVC conduit, PVC insulated copper conductor single core wire, GI box, modular plate, 20A modular switch, 16A modular plug, wire etc. as required. Measurement linear meter from switchboard to light.

Wiring for light point/ fan point/ exhaust fan point/ call bell / 5A plug point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, ceiling rose, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. All material and labour are included in the scope of the contractor.

Supply and fixingof recess/ Surface/ Pendent mountinground 12 to 15 Watt LED Down Lighter havingPowder coated die cast aluminiumhousing with heat sink, diffuser/Reflector and driver set complete in all respect.Make and Model Havells Or Equivalent

Supply and fixingof LED Tube Lightwith batten suitablefor up to 1 X 36/40 watt LED tube light complete includingtube etc on surface complete in all respect.

Supply, Installation, testing and commissioning of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, complete with all accessories similar to Havells model Pacer/Havells/Usha /Orient )

1.5 TON, 5 star AC complete with MS stand for mounting outdoor unit, sttabilizer(energy efficient)

Supply, Installation, Testing and commissioning of flameproof (CMIFR approved ) 12'' Exhaust fan, 0.25hP motor, 1440 rpm .Wiring to be done using 3 core FRLS cable .Switch to be placed outside the battery room.

Supply, Installation, testing and commisioning of flameproof LED 1x36/40W tubelights for battery room .Wiring to be done using 3 core FRLS cable .Switch to be placed outside the battery room.

CABLE TRAYS

Supply, Installation, Erection of following Hot Dip Galvanized Lader /perforated type cable trays (as per IS 2629) including bends, tee, crosses, horizontal, insert plate, tray supports and verticle splices etc as required including supply of all GI hardwares, civil works and its materials, all labour and material as required as per standard drawings, specifications and direction of Engineer-in-charge.

150 mm wide

300 mm wide

Installations of cable route markers along the cable route at an interval of 20 metre as well as cable bends and joints.

HDPE CABLE CONDUIT

Supply and laying of following sizes of HDPE cable conduit in required length fixed on steel, concrete or similar structure, laid in trenches, digging, construct conduit ductbank and buried in concrete including cutting, bending, and similar works, supply of clamps, small iron structures, spacers and installlation iof seats, plugs and bushings etc.Civil works and its materials, incluiding all laboures and materials complete as for approved drawings and directions of Engineer-in-Charge.

GG SET with AMF PANEL

Supply installation testing and commissioning of radiator cooled, Gas engine generator set of following ratings with all auxillaries e.g, exhaust pipe with srtructural supports and AMF Panel.Acoustic Enclosures and other accessories complete in all respects.Gas generator shall meet CPCB-4 norms.

SAFETY MATERIALS

Supply and installations of the following iuncluding the supply of necessary clamps, boults, roll plugs etc.Breaking and making good of walls, If required, and all including all laboures and materials complete as per directionsd of engineer in charge, applicable standards and Indiuan electricity rules.

CO2 fire extinguishers(4.5kg)

4 sand Buckets with stand .

Caution Boards[Danger, High violtage] including supply of necessary clamps, bolts and other hardwares.Supply and installations of vitreous enamels, caution boards suitable for 440 volts as per each IS:2551 including fixing on the walls with all the required hardware etc.Complete in english and hindi or local language.Size 200mmx250mm.

Shock hazards charts complete with frame and glass .Size A3 and glass thickness 2mm.

Singe Line Diagrams complete in glass frame .Size A2 and glass thickness 2mm.

TOOL KIT

Rubber hand gloves suitable for 440 volts

First Aid kit

Philips head screw driver of each size 3mm, 3.5mm, 5mm

Flat head screw driver of each size 3.5mm, 5.5mm, 6.5mm

Line Tester suitable for 3 phase, 440 volts

Open head Spanner set of size(6mm-17mm)

INSULATING MATS

Supply and laying of insulating Mats 11kV grade (as per IS:15652-2006) of 1000 mm width.

DISTRIBUTION TRANSFORMER

Supply, Installation, Inspection, Transportation to site, erection on pole, testing and commissioning of 11kV/433V outdoor type, 3 phase, 50Hz, copper wound, ONAN distribution transformer complete with all accessories as per IS2026/1180 and latest ammendments and there of and first oil filled.Termination arrangements for HV side: HT bushing &LV side cable end box /terminal box of following rating.

Supply erection, testing and commissioning of all the items including transformer, all miscelleneous materials required, digging trenching, backfilling, compaction, making of foundations/pedestal, fixing the fencing and gate, spreading of blue granite material etc as required to complete the HT & LT installation as per the tender.(All electrical equipment shall be approved from state electricity board /VCS).

EMERGENCY SHUTDOWN BUTTON

Supply &Installation of emergency shutdown butons with latching lift flap, flameproof type (Zone 1&2 and Gas group IIA & IIB) and weatherproof enclosure IP65, quick release provision, NO NC contacts to trip all the incomers simultaneously of the main electrical distribution board and UPS distribution boards incomer.Location of installation to be decided during detailed emngineering.

Supply, fixing and connection of 250 V below given mosaic wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts , bolts , etc. complete with labour and materials as per direction of the Engineer-in-Charge

RJ 11 Telephone socket 1 module for connection of Telephone.

RJ 45 UTP category 6-2 module information outlet - tool less

2 pins - 1 module telephone socket

Supply & laying of Telephone cable - 2 Pair, inside filed operator building for telephone system.

Supply and laying of UTP 4 pair CAT-6 LAN (make D Link/Lucent/Amp) cable in the existing surface / recessed steel /PVC conduit as required

Supply and Installation of LAN sockets in recess PVC conduit including PVC conduit,telephone socket,cable,accessories etc as required.

TECHSOL Engineers (BID ID -237597)

RAJ CONSTRUCTION (BID ID -238414)