Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.9 LAccepted-AOC 1 50 MANGALAM RIICO INDUSTRIAL AREA KANAKPURA JAIPUR RAJASTHAN | JAIPUR | RAJASTHAN | L1 | Accepted-AOC first lowest tenderer | |
| 2 | L2₹52.2 L+₹15.3 L (41.3%)Rejected-Finance 108 3 CHANDAR NAGAR DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-Finance Due to Higher Quoted Rate |
Tender Value
Refer Docs
EMD Value
₹82,000
Closing Date
8 Jul 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
OFFICE OF THE EXECUTIVE ENGINEER E/M DIVISION P.W.D.BHIMTAL (NAINITAL)
SITC of H.T and L.T Panel at D.S.B Campus Nainital
2024_pwd_72529_1
659/Nivida dated 10-06-2024
Open Tender
Electrical Works
Item Rate
90 days
DSB Campus Nainital
Please Refer Tender Documents
2 documents required · 2 mandatory
₹3,540
Executive Engineer, E/M Division, P.W.D., Bhimtal
₹82,000
Bhimtal
31 Jul 2024
20 Jun 2024
9 Jul 2024
20 Jun 2024
8 Jul 2024
20 Jun 2024
20 Jun 2024 - 24 Jun 2024
25 Jun 2024
Amount
SITC OF HT PANEL 11kV, 630Amp, 20kA/3-sec, Outdoor suitable, SafePlus Compact Switchgear Type ‘CVV+ Nos Extensible Comprising of: 01nos. Load Break Switch (Module Type ‘C’) 02nos. Fixed-Type VCB (Module Type ‘V’) Total number of modules 3 pcs etc. Technical specifications of HT Panel as per Annexure 2
SUPPLY,INSTALLATION,TESTING & COMMISSIONING of LT PANELS OUTDOOR TYPE WITH SPECIFIC INCLUSIONS incomer-1: *1000A, FP 50KA, EDO ACB FOR 500KVA TRANSFORMER -1 Incomer-2: *1000A, FP 50KA, EDO ACB FOR 500KVA TRANSFORMER -2 Incomer-3: *1000A, FP 50KA, EDO ACB FOR 500KVA DG SET BUS COUPLER: *1000A, FP 50KA, EDO ACB BUSBAR 2000 Amp, FP, Electrolytic grade Al busbar for main ACB / MCCB outing & feeders distribution, The Bus Bar section should be covered with withdrawable Acrylic sheet for protection. Outgoing: Outgoing-1: *1000A, FP 50KA, EDO ACB Outgoing-2: *1000A, FP 50KA, EDO ACB Auto AMF :-The AMF panel should be capable for two external source and one nos DG sets. Suitable PLC for synchronisation & AMF operation of One DG sets - 1 nos Suitable slot I/O rack with power supply Communication cable from Operator interface to PLC Hooter for varios status annunciation All the software required for proper operation 1 KVA online UPS with half an hour battery (SMF) back up for start operation. Technical specifications of LT Panel as per Annexure 2
Supply, Installation, testing & commissioning of 3.3 KV grade Earthed Aluminium conductor, XLPE insulated armoured HT Cable confirming to IS:7098 /II /85 including excavation of 30cm x 75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, including all required materials such as fixing clamps, screws etc as required. including labour atc as per specification, drawings and directions of Engineer-In-charge. Contractor has to check actual cable length for electrical connecton before execution at site. 3X185 SQ mm aluminium armoured cable.
Supply, Installation, testing & commissioning of 1.1 KV grade Earthed Aluminium conductor, XLPE insulated armoured HT Cable confirming to IS:7098 /II /85 including excavation of 30cm x 75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, including all required materials such as fixing clamps, screws etc as required. including labour atc as per specification, drawings and directions of Engineer-In-charge. Contractor has to check actual cable length for electrical connecton before execution at site. 3.5X300 SQ mm aluminium armoured cable
S & I of 1100V grade armoured cable having sector / circular shaped aluminium / copper conductor PVC insulated cores, laid up, PVC tape wrappe d inner sheathed, GI strip / wire armoured and overall extruded PVC sheathed confirming to IS: 1554, laid on wall / ceiling using GI clamps & spacers as per route shown at site and further as directed by Engineer in charge at site in the following sizes: 12C X 2.5 sq mm copper armoured cable.
Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Outdoor end terminal for 3x185 sq mm aluminium armoured cable.
Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.Indoor end terminal for 3x185 sq mm aluminium armoured cable.
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm).
MITTAL MACHINES PVT LTD
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .