Development work

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters includingchowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead. Not exceeding 3 sq.m in area.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.within all leads and lifts as directed by the Engineer-in-Charge..

Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level work in foundation and plinth (1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form for : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge. Suspended floors roofs, landings, shelves and their supports balconies girders bressumers and cantilever

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). Above Plinth level Upto 5 floor level.

Steel reinforcement for R.C.C. work ( TATA/ Sail Make) including straightening, cutting, bending, placing in position and binding all complete above plinth level (Mild steel and Medium Tensile steel bars) including entire carriage of materials in all leads and lifts .

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge.35 mm thick shutters

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200X10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. of size of size 600X600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm with Spacer and apoxy of size 600X1200 mm .(Rates are 20% inhance for Spacer and apoxy)

Providing and layingdelphi Bianco Matt Tile 150 .600 tiles in skirting (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm with Spacer and apoxy etc. complete of size 600X600 mm .(Rates are 20% inhance for Spacer and apoxy)

Providing and laying Benzil stone Plus AGL Tile 450X450mm thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. of size 600X600 mm .

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charg Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand)

20 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer i/c water thinable priminig coat with cement primer.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Applying priming coats over wood & wood based surface with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture WS&SI

P/F wall hang WC of Size 545x350x370mm P Trap with campbell plus slim soft close cover of Cera OR equivalent complete in all all respect

P/F concealed cistern set lof size 500x90x460 with full frame(without knob) of cera OR equivalent Complete in all respect.MR

Providing and fixing Actuator Knob Option/Cantroll Plate for Concealed. flushing cistern Cera B110101 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.

P/F Wash Basins of size 515x415x145mm of Snow white cloured of cera or equivalent complete in all respect

P/F Bottle trap made of SS Size of 150mm and 50mm dia

P/F Vitreous china Urinal pot of size 360x330x740mm with maximum sensing range is 300mm/12inches and 4X1.5V Duracell batteries snow white coloured of cera or equivalent complete in all respect MR

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 ( of Series CON 107KN ):15 mm nominal bore Long Body .

Providing and fixing C.P. brass Pillar cock of approved quality conforming to IS:8931of Series CON 047 KN :15 mm nominal bore.

Providing and fixing CPVC Gate valve (brass) of approved quality 1"

Reducer 3/4"X1"

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15mm Nominal Size

Providing and fixing Cromium Plated grating of approved quality and colour 150 mm nominal size square 100 mm diameter of the inner hinged round grating ( Circular Type)

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

P/FCP brass toilet paper holder

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110X75 mm

Providing and fixing Single socketed pipes of Supreme,Finolax,D-plast Vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion including entire carriage of materials in all leads and lifts .75mm dia

90mm dia

110mm dia

160mm dia

Providing and fixing PVC spun fitting accessories ISI marked including fixing with approved adhesive etc. complete of Finolex make) sBends of required degree any radious of Finolex/Supreme make : Plain bends :75mm dia :Elbow

Plain Tee

Union

Cuplar

110mm dia: Elbow

Plain Tee

Plain Bend

50mm dia: Plain Tee

Plain Bend

P/F Main hole cover 450X 450mm.P/F Extension Nipple

P/F tank Nipple

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge 1216 (16 mm OD) pipe ( For Internal Work )

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Carriage of waste material ie gritt, excavated earth ,bricks and other waistage.

ABHISHEK CHAUHAN

ROOP LAL THAKUR